A review on the wear performance of additively manufactured 316L stainless steel: process, structure, and performance

1. Ampower Additive Manufacturing Report. AMPOWER report on additive manufacturing 2024. https://additive-manufacturing-report.com. Accessed 17 Jun 2024

2. Hemachandra M, Thapliyal S, Adepu K (2022) A Review On Microstructural And Tribological Performance Of Additively Manufactured Parts. J Mater Sci 57(36):17139–17161. https://doi.org/10.1007/s10853-022-07736-110.1007/s10853-022-07736-1 ↗

3. Qin H, Xu R, Lan P, Wang J, Lu W (2020) Wear performance of metal materials fabricated by powder bed fusion: a literature review. Metals (Basel) 10(3):304. https://doi.org/10.3390/met1003030410.3390/met10030304 ↗

4. Ralls AM, Kumar P, Menezes PL (2020) Tribological properties of additive manufactured materials for energy applications: a review. Processes 9(1):31. https://doi.org/10.3390/pr901003110.3390/pr9010031 ↗

5. Renner P, Jha S, Chen Y, Raut A, Mehta SG, Liang H (2021) A review on corrosion and wear of additively manufactured alloys. J Tribol. https://doi.org/10.1115/1.405050310.1115/1.4050503 ↗

6. Lodhi MJK, Deen KM, Greenlee-Wacker MC, Haider W (2019) Additively manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications. Addit Manuf 27:8–19. https://doi.org/10.1016/j.addma.2019.02.00510.1016/j.addma.2019.02.005 ↗

7. Majumdar JD, Kumar A, Pityana S, Manna I (2018) Laser surface melting of AISI 316L stainless steel for bio-implant application. Proc Natl Acad Sci India Sect A 88(3):387–403. https://doi.org/10.1007/s40010-018-0524-410.1007/s40010-018-0524-4 ↗

8. Al-Mamun NS, Mairaj Deen K, Haider W, Asselin E, Shabib I (2020) Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: the effect of citrate ions. Addit Manuf 34:101237. https://doi.org/10.1016/j.addma.2020.10123710.1016/j.addma.2020.101237 ↗

9. Szwajka K, Zielińska-Szwajka J, Trzepieciński T (2023) Improving the surface integrity of 316L steel in the context of bioimplant applications. Materials 16(9):3460. https://doi.org/10.3390/ma1609346010.3390/ma16093460 ↗

10. Naim M, Alhussein A, Chemkhi M (2023) Tribocorrosion of additively manufactured (AM-ed) metallic biomaterials in hip implants: review on methodology and post treatments. J Bio- Tribo-Corros 9(4):65. https://doi.org/10.1007/s40735-023-00783-410.1007/s40735-023-00783-4 ↗

11. Ara I, Eshkabilov S, Azarmi F, Sevostianov I, Tangpong XW (2022) Investigation on elastic properties and unconventional plasticity of 316L stainless steel processed by selective laser melting technology. Prog Addit Manuf 7(6):1169–1181. https://doi.org/10.1007/s40964-022-00291-w10.1007/s40964-022-00291-w ↗

12. Eshkabilov S, Ara I, Azarmi F (2022) A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel. Int J Adv Manuf Technol 123(7–8):2733–2756. https://doi.org/10.1007/s00170-022-10331-y10.1007/s00170-022-10331-y ↗

13. Eshkabilov S, Ara I, Sevostianov I, Azarmi F, Tangpong X (2021) Mechanical and thermal properties of stainless steel parts, manufactured by various technologies, in relation to their microstructure. Int J Eng Sci 159:103398. https://doi.org/10.1016/j.ijengsci.2020.10339810.1016/j.ijengsci.2020.103398 ↗

14. Monteiro H, Carmona-Aparicio G, Lei I, Despeisse M (2022) Energy and material efficiency strategies enabled by metal additive manufacturing—a review for the aeronautic and aerospace sectors. Energy Rep 8:298–305. https://doi.org/10.1016/j.egyr.2022.01.03510.1016/j.egyr.2022.01.035 ↗

15. Markl M, Körner C (2016) Multiscale modeling of powder bed-based additive manufacturing. Annu Rev Mater Res 46(1):93–123. https://doi.org/10.1146/annurev-matsci-070115-03215810.1146/annurev-matsci-070115-032158 ↗

16. Ara I, Azarmi F, Tangpong XW (2021) Microstructure analysis of high-density 316L stainless steel manufactured by selective laser melting process. Metallogr Microstruct Anal 10(6):754–767. https://doi.org/10.1007/s13632-021-00798-810.1007/s13632-021-00798-8 ↗

17. Tamayo JA, Riascos M, Vargas CA, Baena LM (2021) Additive manufacturing of Ti6Al4V alloy via electron beam melting for the development of implants for the biomedical industry. Heliyon 7(5):e06892. https://doi.org/10.1016/j.heliyon.2021.e0689210.1016/j.heliyon.2021.e06892 ↗

18. Palmquist A, Jolic M, Hryha E, Shah FA (2023) Complex geometry and integrated macro-porosity: clinical applications of electron beam melting to fabricate bespoke bone-anchored implants. Acta Biomater 156:125–145. https://doi.org/10.1016/j.actbio.2022.06.00210.1016/j.actbio.2022.06.002 ↗

19. Dev Singh D, Mahender T, Raji Reddy A (2021) Powder bed fusion process: a brief review. Mater Today Proc 46:350–355. https://doi.org/10.1016/j.matpr.2020.08.41510.1016/j.matpr.2020.08.415 ↗

20. Sugavaneswaran M, Jebaraj AV, Kumar MDB, Lokesh K, Rajan AJ (2018) Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening. Surf Interfaces 12:31–40. https://doi.org/10.1016/j.surfin.2018.04.01010.1016/j.surfin.2018.04.010 ↗

21. Gu D, Shen Y (2009) Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods. Mater Des 30(8):2903–2910. https://doi.org/10.1016/j.matdes.2009.01.01310.1016/j.matdes.2009.01.013 ↗

22. Phani Babu VV, Veeresh Kumar GB, Barmavatu P (2024) An experimental investigation on surface quality of 3D metal printed SS316L by direct metal laser sintering technique. Int J Interact Des Manuf (IJIDeM). https://doi.org/10.1007/s12008-024-01801-610.1007/s12008-024-01801-6 ↗

23. Attarzadeh F, Fotovvati B, Fitzmire M, Asadi E (2020) Surface roughness and densification correlation for direct metal laser sintering. Int J Adv Manuf Technol 107(5–6):2833–2842. https://doi.org/10.1007/s00170-020-05194-010.1007/s00170-020-05194-0 ↗

24. Cacace S, Pagani L, Colosimo BM, Semeraro Q (2022) The effect of energy density and porosity structure on tensile properties of 316L stainless steel produced by laser powder bed fusion. Prog Addit Manuf 7(5):1053–1070. https://doi.org/10.1007/s40964-022-00281-y10.1007/s40964-022-00281-y ↗

25. Shi Y, Gong S, Xu H, Yang G, Qiao J, Wang Z, Zhang J, Qi B (2023) Electron beam metal additive manufacturing: defects formation and in-process control. J Manuf Process 101:386–431. https://doi.org/10.1016/j.jmapro.2023.06.01310.1016/j.jmapro.2023.06.013 ↗

26. Gui Y, Aoyagi K, Bian H, Chiba A (2022) Detection, classification and prediction of internal defects from surface morphology data of metal parts fabricated by powder bed fusion type additive manufacturing using an electron beam. Addit Manuf 54:102736. https://doi.org/10.1016/j.addma.2022.10273610.1016/j.addma.2022.102736 ↗

27. International Organization for Standardization (2018) Additive manufacturing—general principles—terminology. ISO/ASTM 52900. https://www.iso.org/obp/ui/#iso:std:iso-astm:52900:dis:ed-2:v1:en

28. Ding H, Zou B, Wang X, Liu J, Li L (2023) Microstructure, mechanical properties and machinability of 316L stainless steel fabricated by direct energy deposition. Int J Mech Sci 243:108046. https://doi.org/10.1016/j.ijmecsci.2022.10804610.1016/j.ijmecsci.2022.108046 ↗

29. Wang L, Xue J, Wang Q (2019) Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel. Mater Sci Eng A 751:183–190. https://doi.org/10.1016/j.msea.2019.02.07810.1016/j.msea.2019.02.078 ↗

30. Ahn D-G (2021) Directed energy deposition (DED) process: state of the art. Int J Precis Eng Manuf-Green Technol 8(2):703–742. https://doi.org/10.1007/s40684-020-00302-710.1007/s40684-020-00302-7 ↗

31. Morshed-Behbahani K, Hadadzadeh A, Nasiri A (2024) Electrochemical insight into the passivity and corrosion of 316 L stainless steel fabricated through wire arc additive manufacturing. Colloids Surf A Physicochem Eng Asp 693:134085. https://doi.org/10.1016/j.colsurfa.2024.13408510.1016/j.colsurfa.2024.134085 ↗

32. Das T, Mukherjee M, Chatterjee D, Samanta SK, Lohar AK (2023) A comparative evaluation of the microstructural characteristics of L-DED and W-DED processed 316L stainless steel. CIRP J Manuf Sci Technol 40:114–128. https://doi.org/10.1016/j.cirpj.2022.11.01010.1016/j.cirpj.2022.11.010 ↗

33. Brubaker N, Ali H, Dhakal S, van Rooyen N, Jaster ML, Charit I, Jaques B, Maughan MR (2022) Investigating microstructure and properties of 316L stainless steel produced by wire-fed laser metal deposition. J Mater Eng Perform 31(5):3508–3519. https://doi.org/10.1007/s11665-021-06477-710.1007/s11665-021-06477-7 ↗

34. Hagen L, Yu Z, Clarke A, Clarke K, Tate S, Petrella A, Klemm-Toole J (2023) High deposition rate wire-arc directed energy deposition of 316L and 316LSi: process exploration and modelling. Mater Sci Eng A 880:145044. https://doi.org/10.1016/j.msea.2023.14504410.1016/j.msea.2023.145044 ↗

35. Dinovitzer M, Chen X, Laliberte J, Huang X, Frei H (2019) Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure. Addit Manuf 26:138–146. https://doi.org/10.1016/j.addma.2018.12.01310.1016/j.addma.2018.12.013 ↗

36. Bernauer C, Sigl ME, Grabmann S, Merk T, Zapata A, Zaeh MF (2024) Effects of the thermal history on the microstructural and the mechanical properties of stainless steel 316L parts produced by wire-based laser metal deposition. Mater Sci Eng A 889:145862. https://doi.org/10.1016/j.msea.2023.14586210.1016/j.msea.2023.145862 ↗

37. Douglas R, Lancaster R, Jones T, Barnard N, Adams J (2022) The influence of powder reuse on the properties of laser powder bed-fused stainless steel 316L: a review. Adv Eng Mater. https://doi.org/10.1002/adem.20220059610.1002/adem.202200596 ↗

38. Choo H, Sham K-L, Bohling J, Ngo A, Xiao X, Ren Y, Depond PJ, Matthews MJ, Garlea E (2019) Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. Mater Des 164:107534. https://doi.org/10.1016/j.matdes.2018.12.00610.1016/j.matdes.2018.12.006 ↗

39. Delacroix T, Lomello F, Schuster F, Maskrot H, Garandet J-P (2022) Influence of powder recycling on 316L stainless steel feedstocks and printed parts in laser powder bed fusion. Addit Manuf 50:102553. https://doi.org/10.1016/j.addma.2021.10255310.1016/j.addma.2021.102553 ↗

40. Ziri S, Hor A, Mabru C (2022) Combined effect of powder properties and process parameters on the density of 316L stainless steel obtained by laser powder bed fusion. Int J Adv Manuf Technol 120(9–10):6187–6204. https://doi.org/10.1007/s00170-022-09160-w10.1007/s00170-022-09160-w ↗

41. Ziri S, Hor A, Mabru C (2021) Effect of powder size and processing parameters on surface, density and mechanical properties of 316L elaborated by laser powder bed fusion. ESAFORM. https://doi.org/10.25518/esaform21.156310.25518/esaform21.1563 ↗

42. Haferkamp L, Haudenschild L, Spierings A, Wegener K, Riener K, Ziegelmeier S, Leichtfried GJ (2021) The influence of particle shape, powder flowability, and powder layer density on part density in laser powder bed fusion. Metals (Basel) 11(3):418. https://doi.org/10.3390/met1103041810.3390/met11030418 ↗

43. Nguejio J, Mokhtari M, Paccou E, Baustert E, Khalij L, Hug E, Bernard P, Boileau S, Keller C (2023) Combined effect of a spread powder particle size distribution, surface machining and stress-relief heat treatment on microstructure, tensile and fatigue properties of 316L steel manufactured by laser powder bed fusion. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-023-11008-w10.1007/s00170-023-11008-w ↗

44. Spurek MA, Haferkamp L, Weiss C, Spierings AB, Schleifenbaum JH, Wegener K (2022) Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion. Prog Addit Manuf 7(4):533–542. https://doi.org/10.1007/s40964-021-00240-z10.1007/s40964-021-00240-z ↗

45. Sun Y, Bailey R, Moroz A (2019) Surface finish and properties enhancement of selective laser melted 316L stainless steel by surface mechanical attrition treatment. Surf Coat Technol 378:124993. https://doi.org/10.1016/j.surfcoat.2019.12499310.1016/j.surfcoat.2019.124993 ↗

46. Unune DR, Brown GR, Reilly GC (2022) Thermal based surface modification techniques for enhancing the corrosion and wear resistance of metallic implants: a review. Vacuum 203:111298. https://doi.org/10.1016/j.vacuum.2022.11129810.1016/j.vacuum.2022.111298 ↗

47. Ara I (2023) Microstructural and mechanical properties of selective laser melting processed 316L stainless steel-special case studies: near perfect structure, unconventional plasticity, and wear properties. Ph.D. Diss., North Dakota State University

48. Ara I, Tangpong XW, Azarmi F (2020) Microstructural characteristics of stainless steel 316L processed by selective laser melting technology, pp 405–412. https://doi.org/10.1007/978-3-030-36296-6_3810.1007/978-3-030-36296-6_38 ↗

49. Grabowski T, Ara I, Thorpe J, Azarmi F (2023) Investigation of microstructural characteristics of cobalt chromium molybdenum additively manufactured using laser directed energy deposition technology. Metall Mater Trans A 54(10):4065–4079. https://doi.org/10.1007/s11661-023-07154-110.1007/s11661-023-07154-1 ↗

50. Huang G, Wei K, Deng J, Liu M, Zeng X (2022) High-power laser powder bed fusion of 316L stainless steel: defects, microstructure, and mechanical properties. J Manuf Process 83:235–245. https://doi.org/10.1016/j.jmapro.2022.08.06610.1016/j.jmapro.2022.08.066 ↗

51. Barrionuevo GO, Walczak M, Mendez P, La Fé-Perdomo I, Chiluisa-Palomo E, Navas-Pinto W, Cree DE (2025) Effect of porosity on tribological properties of medical-grade 316L stainless steel manufactured by laser-based powder bed fusion. Materials 18(3):568. https://doi.org/10.3390/ma1803056810.3390/ma18030568 ↗

52. Sun Y, Moroz A, Alrbaey K (2014) Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel. J Mater Eng Perform 23(2):518–526. https://doi.org/10.1007/s11665-013-0784-810.1007/s11665-013-0784-8 ↗

53. Ghasri-Khouzani M, Peng H, Attardo R, Ostiguy P, Neidig J, Billo R, Hoelzle D, Shankar MR (2018) Direct metal laser-sintered stainless steel: comparison of microstructure and hardness between different planes. Int J Adv Manuf Technol 95(9–12):4031–4037. https://doi.org/10.1007/s00170-017-1528-y10.1007/s00170-017-1528-y ↗

54. Yadav A, Srivastava M, Jain PK, Rathee S (2024) Microstructure transformations and improving wear resistance of austenitic stainless steel additively fabricated by arc-based DED Process. Def Technol 38:194–204. https://doi.org/10.1016/j.dt.2024.02.00610.1016/j.dt.2024.02.006 ↗

55. Le VT, Doan QT, Mai DS, Bui MC, Tran HS, Van Tran X, Nguyen VA (2022) Prediction and optimization of processing parameters in wire and arc-based additively manufacturing of 316L stainless steel. J Braz Soc Mech Sci Eng 44(9):394. https://doi.org/10.1007/s40430-022-03698-210.1007/s40430-022-03698-2 ↗

56. Kim K-T (2022) Mechanical performance of additively manufactured austenitic 316L stainless steel. Nucl Eng Technol 54(1):244–254. https://doi.org/10.1016/j.net.2021.07.04110.1016/j.net.2021.07.041 ↗

57. Gowthaman PS, Jeyakumar S, Sarathchandra D (2024) Effect of heat input on microstructure and mechanical properties of 316L stainless steel fabricated by wire arc additive manufacturing. J Mater Eng Perform 33(11):5536–5546. https://doi.org/10.1007/s11665-023-08312-710.1007/s11665-023-08312-7 ↗

58. Lou X, Othon MA, Rebak RB (2017) Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water. Corros Sci 127:120–130. https://doi.org/10.1016/j.corsci.2017.08.02310.1016/j.corsci.2017.08.023 ↗

59. Tucho WM, Lysne VH, Austbø H, Sjolyst-Kverneland A, Hansen V (2018) Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L. J Alloys Compd 740:910–925. https://doi.org/10.1016/j.jallcom.2018.01.09810.1016/j.jallcom.2018.01.098 ↗

60. Vishnu V, Prabhu TR, Imam M, Vineesh KP (2024) Experimental investigation into the dry reciprocating wear behavior of additively manufactured austenitic stainless steel (316L) alloys. JOM 76(6):3081–3098. https://doi.org/10.1007/s11837-024-06491-910.1007/s11837-024-06491-9 ↗

61. Ara I, Tangpong XA, Azarmi F (2023) Unconventional wear characteristics due to perfect plasticity in laser powder bed fusion processed 316 L stainless steel. Int J Adv Manuf Technol 128(7–8):3261–3272. https://doi.org/10.1007/s00170-023-12144-z10.1007/s00170-023-12144-z ↗

62. Kumar V, Dwivedi S, Mandal A, Dixit AR (2024) Experimental investigations on the microstructural evolution and their influence on mechanical, tribological and corrosion performance of wire-arc additive manufactured SS316L structure. Mater Today Commun 38:107673. https://doi.org/10.1016/j.mtcomm.2023.10767310.1016/j.mtcomm.2023.107673 ↗

63. Lakshmanan M, Krishnan JS, Vignesh S, Ramar M (2025) Comparative study of mechanical and tribological behavior of additively manufactured and wrought alloy of SS316L. J Mater Eng Perform 9:1–8. https://doi.org/10.1007/s11665-025-10631-w10.1007/s11665-025-10631-w ↗

64. Wang CJ, Liu TG, Zhu P, Lu YH, Shoji T (2020) Study on microstructure and tensile properties of 316L stainless steel fabricated by CMT wire and arc additive manufacturing. Mater Sci Eng A 796:140006. https://doi.org/10.1016/j.msea.2020.14000610.1016/j.msea.2020.140006 ↗

65. Vora J, Parmar H, Chaudhari R, Khanna S, Doshi M, Patel V (2022) Experimental investigations on mechanical properties of multi-layered structure fabricated by GMAW-based WAAM of SS316L. J Mater Res Technol 20:2748–2757. https://doi.org/10.1016/j.jmrt.2022.08.07410.1016/j.jmrt.2022.08.074 ↗

66. Gallant L, Hsiao A, McSorley G (2021) Benchmark physical and mechanical property characterization of 316L stainless steel DMLS prints. Proceedings of the CSME International Congress, June 27–30, Charlottetown, PE, Canada10.32393/csme.2021.217 ↗

67. Alrumayh A (2024) Wear performance of wire arc AM SS 316L plate for different thermal history regions. Tribol Ind 46(4):651. https://doi.org/10.24874/ti.1654.03.24.1010.24874/ti.1654.03.24.10 ↗

68. Gürol U, Kocaman E, Dilibal S, Koçak M (2023) A comparative study on the microstructure, mechanical properties, wear and corrosion behaviors of SS 316 austenitic stainless steels manufactured by casting and WAAM technologies. CIRP J Manuf Sci Technol 47:215–227. https://doi.org/10.1016/j.cirpj.2023.10.00510.1016/j.cirpj.2023.10.005 ↗

69. Kumar A, Choudhary A, Tiwari A, James C, Kumar H, Kumar Arora P, Akhtar Khan S (2021) An investigation on wear characteristics of additive manufacturing materials. Mater Today Proc 47:3654–3660. https://doi.org/10.1016/j.matpr.2021.01.26310.1016/j.matpr.2021.01.263 ↗

70. Designation: G99 − 23, Standard test method for wear and friction testing with a pin-on-disk or ball-on-disk apparatus. Current edition approved Nov. 1, 2023. Published November 2023. https://doi.org/10.1520/G0099-2310.1520/G0099-23 ↗

71. Designation: G133 − 22, Standard test method for linearly reciprocating ball-on-flat sliding wear1. Current edition approved Nov. 1, 2022. Published November 2022. https://doi.org/10.1520/G0133-2210.1520/G0133-22 ↗

72. Barrionuevo GO, Walczak M, Ramos-Grez J, Mendez P, Debut A (2024) Microstructure effect on sliding wear of 316L stainless steel selectively laser melted. Mater Sci Technol 40(6):466–478. https://doi.org/10.1177/0267083623121739310.1177/02670836231217393 ↗

73. Bolli E, Kaciulis S, Lanzutti A, Mezzi A, Montanari R, Palombi A, Sordetti F, Vaglio E, Varone A, Verona C (2024) Surface characteristics and tribological behavior of 3D-printed 316 L steel after plasma assisted low temperature carburizing. Surf Coat Technol 477:130295. https://doi.org/10.1016/j.surfcoat.2023.13029510.1016/j.surfcoat.2023.130295 ↗

74. Vishnu V, Prabhu TR, Imam M, Vineesh KP (2024) High-temperature dry sliding wear behavior of additively manufactured austenitic stainless steel (316L). Wear 540–541:205259. https://doi.org/10.1016/j.wear.2024.20525910.1016/j.wear.2024.205259 ↗

75. Al Noaimy O, AlMangour B, Abdulsalam E, Eckert J, Prashanth K, Chaubey A, Scudino S, Alzuhairyh S (2023) Tribological behavior of 316L stainless steel manufactured by selective laser melting. In: 4th international conference on architectural & civil engineering sciences; Cihan University-Erbil, pp 142–146. https://doi.org/10.24086/ICACE2022/paper.88910.24086/ICACE2022/paper.889 ↗

76. Demirsöz R, Korkmaz ME, Gupta MK (2022) A novel use of hybrid Cryo-MQL system in improving the tribological characteristics of additively manufactured 316 stainless steel against 100 Cr6 alloy. Tribol Int 173:107613. https://doi.org/10.1016/j.triboint.2022.10761310.1016/j.triboint.2022.107613 ↗

77. Efremenko BV, Zurnadzhy VI, Chabak YuG, Efremenko VG, Kudinova KV, Mazur VA (2022) A comparison study on the effect of counter ball material on sliding wear response of SLM-printed biomedical 316L steel. Mater Today Proc 66:2587–2593. https://doi.org/10.1016/j.matpr.2022.07.11210.1016/j.matpr.2022.07.112 ↗

78. Eliasu A, Duntu SH, Hukpati KS, Amegadzie MY, Agyapong J, Tetteh F, Czekanski A, Boakye-Yiadom S (2022) Effect of individual printing parameters on residual stress and tribological behaviour of 316L stainless steel fabricated with laser powder bed fusion (L-PBF). Int J Adv Manuf Technol 119(11–12):7041–7061. https://doi.org/10.1007/s00170-021-08489-y10.1007/s00170-021-08489-y ↗

79. Özer G, Kisasöz A (2022) The role of heat treatments on wear behaviour of 316L stainless steel produced by additive manufacturing. Mater Lett 327:133014. https://doi.org/10.1016/j.matlet.2022.13301410.1016/j.matlet.2022.133014 ↗

80. Chabak Y, Efremenko B, Petryshynets I, Efremenko V, Lekatou AG, Zurnadzhy V, Bogomol I, Fedun V, Kovaľ K, Pastukhova T (2021) Structural and tribological assessment of biomedical 316 stainless steel subjected to pulsed-plasma surface modification: comparison of LPBF 3D printing and conventional fabrication. Materials 14(24):7671. https://doi.org/10.3390/ma1424767110.3390/ma14247671 ↗

81. Shin W-S, Son B, Song W, Sohn H, Jang H, Kim Y-J, Park C (2021) Heat treatment effect on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L prepared via selective laser melting. Mater Sci Eng A 806:140805. https://doi.org/10.1016/j.msea.2021.14080510.1016/j.msea.2021.140805 ↗

82. Gençoğlu U, Kaya G, Ergüder TO, Hacısalihoğlu İ, Yıldız F (2022) Investigation of the structural and tribological properties of 316L stainless steel manufactured using variable production parameters by selective laser melting. J Mater Eng Perform 31(5):3688–3703. https://doi.org/10.1007/s11665-021-06507-410.1007/s11665-021-06507-4 ↗

83. Alvi S, Saeidi K, Akhtar F (2020) High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel. Wear 448–449:203228. https://doi.org/10.1016/j.wear.2020.20322810.1016/j.wear.2020.203228 ↗

84. Godec M, Donik Č, Kocijan A, Podgornik B, Skobir Balantič DA (2020) Effect of post-treated low-temperature plasma nitriding on the wear and corrosion resistance of 316L stainless steel manufactured by laser powder-bed fusion. Addit Manuf 32:101000. https://doi.org/10.1016/j.addma.2019.10100010.1016/j.addma.2019.101000 ↗

85. Amanov A (2020) Effect of Local treatment temperature of ultrasonic nanocrystalline surface modification on tribological behavior and corrosion resistance of stainless steel 316L produced by selective laser melting. Surf Coat Technol 398:126080. https://doi.org/10.1016/j.surfcoat.2020.12608010.1016/j.surfcoat.2020.126080 ↗

86. Bae KC, Ha KS, Kim YH, Oak J-J, Lee W, Park YH (2020) Building direction dependence of wear resistance of selective laser melted AISI 316L stainless steel under high-speed tribological environment. Int J Adv Manuf Technol 108(7–8):2385–2396. https://doi.org/10.1007/s00170-020-05572-810.1007/s00170-020-05572-8 ↗

87. Huang Y, Yang S, Gu J, Xiong Q, Duan C, Meng X, Fang Y (2020) Microstructure and wear properties of selective laser melting 316L. Mater Chem Phys 254:123487. https://doi.org/10.1016/j.matchemphys.2020.12348710.1016/j.matchemphys.2020.123487 ↗

88. Li H, Ramezani M, Li M, Ma C, Wang J (2018) Tribological performance of selective laser melted 316L stainless steel. Tribol Int 128:121–129. https://doi.org/10.1016/j.triboint.2018.07.02110.1016/j.triboint.2018.07.021 ↗

89. Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva FS, Miranda G (2017) 316L stainless steel mechanical and tribological behavior—a comparison between selective laser melting, hot pressing and conventional casting. Addit Manuf 16:81–89. https://doi.org/10.1016/j.addma.2017.05.00710.1016/j.addma.2017.05.007 ↗

90. Dwivedi S, Dixit AR, Das AK (2024) A relationship between manufacturing routes-microstructure-biotribology of selective laser melted stainless steel 316L under dry and simulated body fluid. Int J Precis Eng Manuf-Green Technol 11(4):1147–1161. https://doi.org/10.1007/s40684-023-00578-510.1007/s40684-023-00578-5 ↗

91. Solanke S, Gaval V, Sanghavi S (2021) In vitro tribological investigation and osseointegration assessment for metallic orthopedic bioimplant materials. Mater Today Proc 44:4173–4178. https://doi.org/10.1016/j.matpr.2020.10.52810.1016/j.matpr.2020.10.528 ↗

92. Shen G, Zhang J, Melentiev R, Fang F (2021) Study on tribological performance of groove-textured bioimplants. J Mech Behav Biomed Mater 119:104514. https://doi.org/10.1016/j.jmbbm.2021.10451410.1016/j.jmbbm.2021.104514 ↗

93. Geethapriyan T, Badhai J, Karthik S, Sonawane A, Palani IA (2023) Biocompatibility and mechanical behaviour studies on wire-arc additive manufactured stainless steel 316L and shape memory alloy (NiTi) materials for biomedical implants. In: Volume 1: additive manufacturing; advanced materials manufacturing; biomanufacturing; life cycle engineering. American Society of Mechanical Engineers. https://doi.org/10.1115/MSEC2023-10073710.1115/MSEC2023-100737 ↗

94. Mannan MS, Jang C (2024) High temperature corrosion of wrought and wire arc additively manufactured 316L stainless steel in a simulated boiler environment. J Mater Res Technol 32:4278–4292. https://doi.org/10.1016/j.jmrt.2024.09.01710.1016/j.jmrt.2024.09.017 ↗

95. Yang K, Wang Q, Qu Y, Jiang Y, Bao Y (2020) Microstructure and corrosion resistance of arc additive manufactured 316L stainless steel. J Wuhan Univ Technol Mater Sci Ed 35(5):930–936. https://doi.org/10.1007/s11595-020-2339-910.1007/s11595-020-2339-9 ↗

96. Wang C, Zhu P, Wang F, Lu YH, Shoji T (2022) Anisotropy of Microstructure and corrosion resistance of 316L stainless steel fabricated by wire and arc additive manufacturing. Corros Sci 206:110549. https://doi.org/10.1016/j.corsci.2022.11054910.1016/j.corsci.2022.110549 ↗

97. Dwivedi S, Dixit AR, Das AK, Adamczuk K (2022) Additive texturing of metallic implant surfaces for improved wetting and biotribological performance. J Mater Res Technol 20:2650–2667. https://doi.org/10.1016/j.jmrt.2022.08.02910.1016/j.jmrt.2022.08.029 ↗

98. Upadhyay RK, Kumar A (2020) Scratch and wear resistance of additive manufactured 316L stainless steel sample fabricated by laser powder bed fusion technique. Wear 458–459:203437. https://doi.org/10.1016/j.wear.2020.20343710.1016/j.wear.2020.203437 ↗

99. England J, Uddin MJ, Ramirez-Cedillo E, Karunarathne D, Nasrazadani S, Golden TD, Siller HR (2022) Nanoindentation hardness and corrosion studies of additively manufactured 316L stainless steel. J Mater Eng Perform 31(8):6795–6805. https://doi.org/10.1007/s11665-022-06703-w10.1007/s11665-022-06703-w ↗

100. Moheimani SK, Iuliano L, Saboori A (2022) The role of substrate preheating on the microstructure, roughness, and mechanical performance of AISI 316L produced by directed energy deposition additive manufacturing. Int J Adv Manuf Technol 119(11–12):7159–7174. https://doi.org/10.1007/s00170-021-08564-410.1007/s00170-021-08564-4 ↗