Effects of Sr on Fe-rich intermetallics in recycled Al–Si–Cu alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Lombardi A, Ravindran C, Mackay R (2015) Optimization of the solution heat treatment process to improve mechanical properties of 319 Al alloy engine blocks using the billet casting method. Mater Sci Eng A 633:125–13510.1016/j.msea.2015.02.076 ↗
2. Alkahtani S (2012) Mechanical performance of heat treated 319 alloys as a function of alloying and aging parameters. Mater Des 41:358–36910.1016/j.matdes.2012.04.034 ↗
3. Ma Z, Samuel AM, Samuel FH, Doty HW, Valtierra S (2008) A study of tensile properties in Al–Si–Cu and Al–Si–Mg alloys: effect of β-iron intermetallics and porosity. Mater Sci Eng A 490(1):36–5110.1016/j.msea.2008.01.028 ↗
4. Li Q, Wang JS, Liu XX, Wang B (2023) Minimizing detrimental impacts of β-Fe in Al–Mg–Si alloy by combining thermal and compression processes. Mater Charact 198:112752–11276810.1016/j.matchar.2023.112752 ↗
5. Moustafa MA (2009) Effect of iron content on the formation of β-Al5FeSi and porosity in Al–Si eutectic alloys. J Mater Process Technol 209(1):605–61010.1016/j.jmatprotec.2008.02.073 ↗
6. Wang JS, Lee PD, Hamilton R, Li M, Allison J (2009) The kinetics of Fe-rich intermetallic formation in aluminium alloys: In situ observation. Scr Mater 60(7):516–51910.1016/j.scriptamat.2008.11.048 ↗
7. Wang JS, Li M, Allison J, Lee PD (2010) Multiscale modeling of the influence of Fe content in a Al–Si–Cu alloy on the size distribution of intermetallic phases and micropores. J Appl Phys 107(6):061804–06181210.1063/1.3340520 ↗
8. Seifeddine S, Johansson S, Svensson IL (2008) The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al–Si-based alloys. Mater Sci Eng A 490(1–2):385–39010.1016/j.msea.2008.01.056 ↗
9. Hwang J, Doty H, Kaufman M (2008) The effects of Mn additions on the microstructure and mechanical properties of Al–Si–Cu casting alloys. Mater Sci Eng A 488(1–2):496–50410.1016/j.msea.2007.12.026 ↗
10. Song D, Zhao Y, Jia Y, Li R, Zhou N, Zheng K, Fu Y, Zhang W (2022) Study of the evolution mechanisms of Fe-rich phases in Al–Si–Fe alloys with Mn modification using synchrotron X-ray imaging. J Alloys Compd 915:165378–16539310.1016/j.jallcom.2022.165378 ↗
11. Liu XX, Wang B, Li Q, Wang JS, Xue CP, Yang XH, Tian GY, Chang XX, Liu XG (2022) Quantifying the effects of grain refiners (AlTiB and Y) on microstructure and properties in W319 alloys. Mater Today Commun 33:104671–10468310.1016/j.mtcomm.2022.104671 ↗
12. Liu XX, Wang B, Li Q, Wang JS, Zhang C, Xue CP, Yang XH, Tian GY, Liu XG, Tang HQ (2022) Quantifying the effects of grain refiners Al–Ti–B and La on the microstructure and mechanical properties of W319 alloy. Metals 12(4):627–64610.3390/met12040627 ↗
13. Wang B, Liu XX, Wang JS, Li Q, Liu KL, Zhang MS (2022) Uncovering the effects of Ce and superheat temperature on Fe-rich intermetallic and microporosity formation in aluminum alloy. Mater Charact 193:112226–11223910.1016/j.matchar.2022.112226 ↗
14. Wang B, Wang JS, Liu XX, Li Q, Liu XG (2022) Uncovering the effects of neutralizing elements (Co, Mn and Cr) on the Fe-rich intermetallic formation in Al–Si–Cu alloys. Mater Sci Eng A 858:144090–14410110.1016/j.msea.2022.144090 ↗
15. Li Q, Wang JS, Xue CP, Wang S, Yang XH, Tian GY, Su H, Li XX, Miao YS (2024) Transforming detrimental intermetallics by accumulative thermal and strain energies in the Al–Fe–Si alloy. J Mater Sci 59:1699–172010.1007/s10853-023-09287-5 ↗
16. Lu S, Hellawell A (1987) The mechanism of silicon modification in aluminum-silicon alloys: impurity induced twinning. Metall Mater Trans A 18:1721–173310.1007/BF02646204 ↗
17. Zhang MS, Liu KL, Wang B, Liang TT, Han JQ, Wang JS (2021) Accelerating pore nucleation and eutectic Si growth kinetics by increasing Cu and Sc for Al–Si–Mg alloys: In-situ observation. J Alloys Compd 869:159173–15918210.1016/j.jallcom.2021.159173 ↗
18. Wang F, Chiu YL, Eskin D, Du W, Shearing PR (2021) A grain refinement mechanism of cast commercial purity aluminium by vanadium. Mater Charact 181:111468–11148010.1016/j.matchar.2021.111468 ↗
19. Mao G, Yan H, Zhu C, Wu Z, Gao W (2019) The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions of different cooling rates. J Alloys Compd 806:909–91610.1016/j.jallcom.2019.07.107 ↗
20. Eiken J, Apel M, Liang SM, Schmid-Fetzer R (2015) Impact of P and Sr on solidification sequence and morphology of hypoeutectic Al–Si alloys: combined thermodynamic computation and phase-field simulation. Acta Mater 98:152–16310.1016/j.actamat.2015.06.056 ↗
21. Closset B, Gruzleski J (1982) Mechanical properties of A356. 0 alloys modified with pure strontium. AFS Trans 90:453–464
22. Zamani M, Seifeddine S (2016) Determination of optimum Sr level for eutectic Si modification in Al–Si cast alloys using thermal analysis and tensile properties. Int J Metalcast 10(4):457–46510.1007/s40962-016-0032-8 ↗
23. Closset B, Gruzleski JE (1982) Structure and properties of hypoeutectic Al–Si–Mg alloys modified with pure strontium. Metall Mater Trans A 13(6):945–95110.1007/BF02643389 ↗
24. Sigworth GK (2008) The modification of Al–Si casting alloys: important practical and theoretical aspects. Int J Metalcast 2:19–4010.1007/BF03355425 ↗
25. Samuel A, Doty H, Valtierra S, Samuel F (2014) Effect of grain refining and Sr-modification interactions on the impact toughness of Al–Si–Mg cast alloys. Mater Des 56:264–27310.1016/j.matdes.2013.10.029 ↗
26. Kruglova A, Engstler M, Gaiselmann G, Stenzel O, Schmidt V, Roland M, Diebels S, Mücklich F (2016) 3D connectivity of eutectic Si as a key property defining strength of Al–Si alloys. Comput Mater Sci 120:99–10710.1016/j.commatsci.2016.04.019 ↗
27. Gan JQ, Huang YJ, Cheng W, Jun D (2020) Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys. Trans Nonferrous Met Soc China 30(11):2879–289010.1016/S1003-6326(20)65428-0 ↗
28. Farahany S, Ourdjini A, Bakhsheshi-Rad HR (2016) Microstructure, mechanical properties and corrosion behavior of Al–Si–Cu–Zn–X (X = Bi, Sb, Sr) die cast alloy. Trans Nonferrous Met Soc China 26(1):28–3810.1016/S1003-6326(16)64085-2 ↗
29. Barrirero J, Li J, Engstler M, Ghafoor N, Schumacher P, Odén M, Mücklich F (2016) Cluster formation at the Si/liquid interface in Sr and Na modified Al–Si alloys. Scr Mater 117:16–1910.1016/j.scriptamat.2016.02.018 ↗
30. Timpel M, Wanderka N, Schlesiger R, Yamamoto T, Lazarev N, Isheim D, Schmitz G, Matsumura S, Banhart J (2012) The role of strontium in modifying aluminium–silicon alloys. Acta Mater 60(9):3920–392810.1016/j.actamat.2012.03.031 ↗
31. Caceres C, Taylor J (2006) Enhanced ductility in Al–Si–Cu-Mg foundry alloys with high Si content. Metall Mater Trans B 37:897–90310.1007/BF02735011 ↗
32. Mulazimoglu M, Paray F, Stephen G, Kulunk B (1994) Modification of intermetallic phases by strontium in aluminum wrought alloys. Light Met 27:1047–1056
33. Yie SN, Lee SL, Lin YH, Lin JC (1999) Mechanical properties of Al-11% Si casting alloys containing trace Be and Sr. Mater Trans JIM 40(4):294–30010.2320/matertrans1989.40.294 ↗
34. Haro-Rodríguez S, Goytia-Reyes RE, Dwivedi DK, Baltazar-Hernàndez VH, Flores-Zúiga H, Pérez-López MJ (2011) On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al–Si–Mg alloy. Mater Des 32(4):1865–187110.1016/j.matdes.2010.12.012 ↗
35. Samuel A, Samuel F, Doty H (1996) Observations on the formation of β-Al5FeSi phase in 319 type Al–Si alloys. J Mater Sci 31:5529–553910.1007/BF01159327 ↗
36. Balasubramani N, Moodispaw M, Cinkilic E, Miao J, Luo AA (2024) Strontium effects on the formation of iron-intermetallic phases in secondary Al–9Si-0.6 Fe alloys. Metall Mater Trans A 55(2):550–56810.1007/s11661-023-07267-7 ↗
37. Timpel M, Wanderka N, Grothausmann R, Banhart J (2013) Distribution of Fe-rich phases in eutectic grains of Sr-modified Al–10 wt% Si–0.1 wt% Fe casting alloy. J Alloys Compd 558:18–2510.1016/j.jallcom.2012.12.009 ↗
38. Suárez-Peña B, Asensio-Lozano J (2006) Influence of Sr modification and Ti grain refinement on the morphology of Fe-rich precipitates in eutectic Al–Si die cast alloys. Scr Mater 54(9):1543–154810.1016/j.scriptamat.2006.01.029 ↗
39. Kresse G, Furthmüller J (1996) Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B 54(16):11169–1118610.1103/PhysRevB.54.11169 ↗
40. Wang S, Yang XH, Wang JS, Zhang C, Xue CP (2023) Identifying the crystal structure of T1 precipitates in Al–Li–Cu alloys by ab initio calculations and HAADF-STEM imaging. J Mater Sci Technol 133:41–5710.1016/j.jmst.2022.05.056 ↗
41. Perdew JP, Burke K, Ernzerhof M (1996) Generalized gradient approximation made simple. Phys Rev Lett 77(18):3865–386810.1103/PhysRevLett.77.3865 ↗
42. Wang S, Xue CP, Yang XH, Tian GY, Wang JS (2023) Heterogeneous nucleation of T1 precipitates in solid solution of Al–Cu–Li alloys from Ag-rich structures: an ab initio study. Scr Mater 225:115191–11519710.1016/j.scriptamat.2022.115191 ↗
43. Monkhorst HJ, Pack JD (1976) Special points for Brillouin-zone integrations. Phys Rev B 13(12):5188–519210.1103/PhysRevB.13.5188 ↗
44. Wang K, Li W, Xu W, Hou S, Hu S (2020) Simultaneous improvement of thermal conductivity and strength for commercial A356 alloy using strontium modification process. Met Mater Int 27(11):4742–475610.1007/s12540-020-00669-x ↗
45. Ashtari P, Tezuka H, Sato T (2003) Influence of Sr and Mn additions on intermetallic compound morphologies in Al–Si–Cu–Fe cast alloys. Mater Trans 44(12):2611–261610.2320/matertrans.44.2611 ↗
46. Shabestari SG (2004) The effect of iron and manganese on the formation of intermetallic compounds in aluminum–silicon alloys. Mater Sci Eng A 383(2):289–29810.1016/S0921-5093(04)00832-9 ↗
47. Dinnis CM, Taylor JA, Dahle AK (2006) Iron-related porosity in Al–Si–(Cu) foundry alloys. Mater Sci Eng A 425(1–2):286–29610.1016/j.msea.2006.03.045 ↗
48. Fat-Halla N (1989) Structural modification of Al–Si eutectic alloy by Sr and its effect on tensile and fracture characteristics. J Mater Sci 24(7):2488–249210.1007/BF01174517 ↗
49. Costa TA, Dias M, Gomes LG, Rocha OL, Garcia A (2016) Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al–Si–Cu alloy. J Alloys Compd 683:485–49410.1016/j.jallcom.2016.05.099 ↗
50. Tavitas-Medrano FJ, Gruzleski JE, Samuel FH, Valtierra S, Doty HW (2008) Effect of Mg and Sr-modification on the mechanical properties of 319-type aluminum cast alloys subjected to artificial aging. Mater Sci Eng A 480(1–2):356–36410.1016/j.msea.2007.09.002 ↗
51. Zheng Y, Xiao W, Ge S, Zhao W, Hanada S, Ma C (2015) Effects of Cu content and Cu/Mg ratio on the microstructure and mechanical properties of Al–Si–Cu–Mg alloys. J Alloys Compd 649:291–29610.1016/j.jallcom.2015.07.090 ↗
52. Yang H, Ji S, Fan Z (2015) Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys. Mater Des 85:823–83210.1016/j.matdes.2015.07.074 ↗
53. SjoLander E, Seifeddine S (2011) Artificial ageing of Al–Si–Cu–Mg casting alloys. Mater Sci Eng A 528(24):7402–740910.1016/j.msea.2011.06.036 ↗
54. Wang Y, Lu Y, Zhang S, Wang Y, Tong L, Hong W, Chen Z (2021) Analysis of interface properties and associated void of nanoscale Al precipitates in Al–Si alloys: first-principles calculations and experiment. J Alloys Compd 873:159598–15961210.1016/j.jallcom.2021.159598 ↗
55. Na B, Zhou BC, Wolverton C, Kim K (2021) First-principles calculations of bulk and interfacial thermodynamic properties of the T1 phase in Al–Cu–Li alloys. Scr Mater 202:114009–11401410.1016/j.scriptamat.2021.114009 ↗
56. Su H, Tian GY, Zhang C, Wang S, Xue CP, Wang JS, Guan SK (2022) Quantitative evaluation of the short-range order strengthening effect on solid solution and GB strength of Mg–Y alloys by ab initio calculations. J Mater Sci 57(42):19986–2000110.1007/s10853-022-07823-3 ↗
57. Tian G, Wang JS, Zhang C, Wang S, Wang B, StJohn D (2022) Ultra-strong Mg alloy with nano-grain structures produced by a high-throughput magnetron co-sputtering method for the full chemistry spectra. J Mater Sci 57(47):21813–2182710.1007/s10853-022-07994-z ↗
58. Han YF, Dai YB, Wang J, Shu D, Sun BD (2011) First-principles calculations on Al/AlB2 interfaces. Appl Surf Sci 257(17):7831–783610.1016/j.apsusc.2011.04.038 ↗
59. Wang S, Zhang C, Li X, Wang JS (2021) Uncovering the influence of Cu on the thickening and strength of the δ′/θ′/δ′ nano-composite precipitate in Al–Cu–Li alloys. J Mater Sci 56(16):10092–1010710.1007/s10853-021-05894-2 ↗
60. Butler KT, Sai Gautam G, Canepa P (2019) Designing interfaces in energy materials applications with first-principles calculations. NPJ Comput Mater 5(1):19–3110.1038/s41524-019-0160-9 ↗
61. Li JH, Albu M, Hofer F, Schumacher P (2015) Solute adsorption and entrapment during eutectic Si growth in A-Si-based alloys. Acta Mater 83:187–20210.1016/j.actamat.2014.09.040 ↗
62. Rosa AL, Neugebauer J (2006) Understanding Si adsorption on GaN (0001) surfaces using first-principles calculations. Phys Rev B 73(20):205314–20532610.1103/PhysRevB.73.205314 ↗
63. Song D, Zhao Y, Jia Y, Huang G, Zhang Z, Zhou N, Li X, Zheng K, Fu Y, Zhang W (2023) Effect of B addition on the formation of Fe-rich phases in Al–Si–Fe alloys. J Alloys Compd 930:167426–16743710.1016/j.jallcom.2022.167426 ↗
64. Que Z, Wang Y, Mendis CL, Fang C, Xia J, Zhou X, Fan Z (2022) Understanding Fe-containing intermetallic compounds in Al alloys: an overview of recent advances from the LiME Research Hub. Metals 12(10):1677–171010.3390/met12101677 ↗
65. Kobayashi KF, Hogan LM (1985) The crystal growth of silicon in Al–Si alloys. J Mater Sci 20:1961–197510.1007/BF01112278 ↗
66. Zhachuk RA, Dolbak AE, Shklyaev AA (2020) Atomic structure of high Miller index Si(47 35 7) surface. Surf Sci 693:121549–12155410.1016/j.susc.2019.121549 ↗