DataVXJournal of Materials SciencePaper
journal article·2025-11

The grain boundary wetting by the second solid phase in the iron-carbon alloys

B. B. Straumal, N. N. Khrapova, O. A. Kogtenkova, A. B. Straumal, A. V. Druzhinin

Journal of Materials Science· Volume 60· Issue 42
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloys

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Straumal B, Lepkova T, Korneva A, Gerstein G, Kogtenkova O, Gornakova A (2023) Grain boundary wetting by the second solid phase: 20 years of history. Metals 13:929. https://doi.org/10.3390/met1305092910.3390/met13050929 ↗
2. Straumal B, Gust W, Watanabe T (1999) Tie lines of the grain boundary wetting phase transition in the Zn-rich part of the Zn–Sn phase diagram. Mater Sci Forum 294–296:411–414. https://doi.org/10.4028/www.scientific.net/MSF.294-296.41110.4028/www.scientific.net/MSF.294-296.411 ↗
3. Straumal B, Muschik T, Gust W, Predel B (1992) The wetting transition in high and low energy grain boundaries in the Cu(In) system. Acta Metall Mater 40:939–945. https://doi.org/10.1016/0956-7151(92)90070-U10.1016/0956-7151(92)90070-U ↗
4. Straumal B, Molodov D, Gust W (1995) Wetting transition on the grain boundaries in Al contacting with Sn-rich melt. Interface Sci 3:127–132. https://doi.org/10.1007/BF0020701410.1007/BF00207014 ↗
5. López GA, Mittemeijer EJ, Straumal BB (2004) Grain boundary wetting by a solid phase; microstructural development in a Zn–5 wt.% Al alloy. Acta Mater 52:4537–4545. https://doi.org/10.1016/j.actamat.2004.06.01110.1016/j.actamat.2004.06.011 ↗
6. Straumal BB, Baretzky B, Kogtenkova OA, Straumal AB, Sidorenko AS (2010) Wetting of grain boundaries in Al by the solid Al3Mg2 phase. J Mater Sci 45:2057–2061. https://doi.org/10.1007/s10853-009-4014-610.1007/s10853-009-4014-6 ↗
7. Protasova SG, Kogtenkova OA, Straumal BB, Zięba P, Baretzky B (2011) Inversed solid-phase grain boundary wetting in the Al–Zn system. J Mater Sci 46:4349–4353. https://doi.org/10.1007/s10853-011-5322-110.1007/s10853-011-5322-1 ↗
8. Straumal BB, Gornakova AS, Prokofjev SI, Afonikova NS, Baretzky B, Nekrasov AN, Kolesnikova KI (2014) Continuous and discontinuous αTi layers between grains of β(Ti, Co) phase. J Mater Eng Perform 23:1580–1584. https://doi.org/10.1007/s11665-013-0789-310.1007/s11665-013-0789-3 ↗
9. Gornakova AS, Prokofiev SI, Kolesnikova KI, Straumal BB (2016) Formation regularities of grain boundary interlayers of the α-Ti phase in binary titanium alloys. Russ J Non-Ferr Met 57:229–235. https://doi.org/10.3103/S106782121603007X10.3103/S106782121603007X ↗
10. Straumal BB, Kogtenkova OA, Straumal AB, Kuchyeyev YuO, Baretzky B (2010) Contact angles by the solid-phase grain boundary wetting in the Co–Cu system. J Mater Sci 45:4271–4275. https://doi.org/10.1007/s10853-010-4377-810.1007/s10853-010-4377-8 ↗
11. Straumal BB, Kogtenkova OA, Kolesnikova KI, Straumal AB, Bulatov MF, Nekrasov AN (2014) Reversible “wetting” of grain boundaries by the second solid phase in the Cu–In system. JETP Lett 100:535–539. https://doi.org/10.1134/S002136401420010710.1134/S0021364014200107 ↗
12. Ke B, Ye LY, Zhang Y, Liu XD, Dong Y, Wang P, Tang JG, Liu SD (2021) Enhanced strength and electrical conductivities of an Al-Zn-Mg aluminum alloy through a new aging process. Mater Lett 304:30586. https://doi.org/10.1016/j.matlet.2021.13058610.1016/j.matlet.2021.130586 ↗
13. Gao T, Liu LY, Liu SS, Yuan CH, Bian YH, Liu XF (2021) The growth behavior of Al2Cu phase in confined spaces constituted by gamma-Al2O3 particle clusters. Mater Lett 304:130711. https://doi.org/10.1016/j.matlet.2021.13071110.1016/j.matlet.2021.130711 ↗
14. Pouraliakbar H, Beygi R, Fallah V, Monazzah AH, Jandaghi MR, Khalaj G, da Silva LFM, Pavese M (2022) Processing of Al–Cu–Mg alloy by FSSP: parametric analysis and the effect of cooling environment on microstructure evolution. Mater Lett 308:131157. https://doi.org/10.1016/j.matlet.2021.13115710.1016/j.matlet.2021.131157 ↗
15. Yu X, Chen SY, Gu F, Zhang ZY, Sun JB, Cui CX (2022) Preparation of Alnico magnet with high magnetization by thermal deformation. Mater Lett 310:131503. https://doi.org/10.1016/j.matlet.2021.13150310.1016/j.matlet.2021.131503 ↗
16. Wang G, Gu Z, Yu G (2022) Precipitates evolution of the AA7075-H18 alloy sheet during the application of the solution heat treatment process. Mater Lett 318:132230. https://doi.org/10.1016/j.matlet.2022.13223010.1016/j.matlet.2022.132230 ↗
17. Que Z, Wang Y, Fan Z, Hashimoto T, Zho X (2022) Enhanced heterogeneous nucleation of Al6(Fe, Mn) compound in Al alloys by interfacial segregation of Mn on TiB2 particles surface. Mater Lett 323:132570. https://doi.org/10.1016/j.matlet.2022.13257010.1016/j.matlet.2022.132570 ↗
18. Rogachev SO, Belov NA, Cherkasov SO, Sundeev RV (2022) Joint effect of electromagnetic casting and high-pressure torsion on the structure and hardening of Al3.3Cu2.5Mn0.5Zr (wt%) alloy. Mater Lett 324:132776. https://doi.org/10.1016/j.matlet.2022.13277610.1016/j.matlet.2022.132776 ↗
19. Song Z, Niu R, Cui X, Bobruk EV, Murashkin MYu, Enikeev NA, Gu J, Song M, Bhatia V, Ringer SP, Valiev RZ, Liao X (2023) Mechanism of room-temperature superplasticity in ultrafine-grained Al–Zn alloys. Acta Mater 246:118671. https://doi.org/10.1016/j.actamat.2023.11867110.1016/j.actamat.2023.118671 ↗
20. Kanetas PJP, Calvo J, Rodriguez-Calvillo P, Marrero JMC, Antunano MAZ, Guerrero-Mata MP (2020) EBSD Study of delta-processed Ni-based superalloy. Metals 10:1466. https://doi.org/10.3390/met1011146610.3390/met10111466 ↗
21. Yan DC, Qiu NS, Zuo XW (2021) On the Cr-rich continuous and discontinuous precipitation kinetics in Ni-Cr alloys by microstructural characterization and differential scanning calorimetry analysis. Mater Lett 296:129887. https://doi.org/10.1016/j.matlet.2021.12988710.1016/j.matlet.2021.129887 ↗
22. Wu Y, Li YT, Xu YT, Kang MD, Wang J, Sun BD (2021) Unveiling the precipitation-induced high-temperature oxidation behavior in a Ni-Al-Y alloy. Mater Lett 297:129977. https://doi.org/10.1016/j.matlet.2021.12997710.1016/j.matlet.2021.129977 ↗
23. Tong YX, Liu JX, Sun SB, Chen F, Zarinejad M (2022) Unusual precipitation and its hardness enhancement in Fe-alloyed 60NiTi alloy. Mater Lett 329:133170. https://doi.org/10.1016/j.matlet.2022.13317010.1016/j.matlet.2022.133170 ↗
24. Babalola BJ, Ayodele OO, Awotunde MA, Akinwamide SO, Olubambi PA (2021) Microstructure and mechanical properties of Ni-17Cr-xCo ternary alloys fabricated via field-assisted sintering. Mater Lett 302:130404. https://doi.org/10.1016/j.matlet.2021.13040410.1016/j.matlet.2021.130404 ↗
25. Quintana-Nedelcos A, Anis M, Osman R, Yang J, Leong Z, Azakli Y, Morley NA (2022) On the structural, microstructural and magnetic properties evolution of Ni0.5FeCoAlCrx alloys. Mater Lett 311:131542. https://doi.org/10.1016/j.matlet.2021.13154210.1016/j.matlet.2021.131542 ↗
26. Liang SL, Wang YH, Wang H, Wang J, Jiang SH (2023) Achieving improved strength and ductility through multi-pass cold deformation and annealing of a Cu–Zn–Bi alloy. Mater Lett 330:133373. https://doi.org/10.1016/j.matlet.2022.13337310.1016/j.matlet.2022.133373 ↗
27. Sun Y, Song C, Zhang Y, Li M, Zhang Y (2021) Oxidation on the current-carrying rolling surface and its subsequent impact on the damage of Cu contact pairs in O2/N2 mixture. Mater Lett 288:129349. https://doi.org/10.1016/j.matlet.2021.12934910.1016/j.matlet.2021.129349 ↗
28. Nie Q, Wang B, Zhang J, Tang W (2022) Fabrication of the Ag-coated Invar/Cu bimetal matrix composites through spark plasma sintering: an investigation on microstructure and properties. Mater Lett 321:132440. https://doi.org/10.1016/j.matlet.2022.13244010.1016/j.matlet.2022.132440 ↗
29. Straumal BB, Gornakova AS, Kucheev YO, Baretzky B, Nekrasov AN (2012) Grain boundary wetting by a second solid phase in the Zr–Nb alloys. J Mater Eng Perform 21:721–724. https://doi.org/10.1007/s11665-012-0158-710.1007/s11665-012-0158-7 ↗
30. Huang GY, Zhang GS, Song P, Liu XM, Lv X, Li M, Zhang JH, Deng WK, Guo DF (2022) Tailoring pre-deformation microstructure—an easy way for nanocrystallization. Mater Lett 308:131143. https://doi.org/10.1016/j.matlet.2021.13114310.1016/j.matlet.2021.131143 ↗
31. Cheng F, Wang HM, Yang JW, Li Z, Cheng X, Tian XJ (2023) Deformation kinking in duplex titanium alloy with widmannstatten laths under high strain rates. Mater Lett 333:133591. https://doi.org/10.1016/j.matlet.2022.13359110.1016/j.matlet.2022.133591 ↗
32. Gornakova AS, Straumal BB, Nekrasov AN, Kilmametov A, Afonikova NS (2018) Grain boundary wetting by a second solid phase in Ti–Fe alloys. J Mater Eng Perform 27:4989–4992. https://doi.org/10.1007/s11665-018-3300-310.1007/s11665-018-3300-3 ↗
33. Xiao C, Zhang H, Davoodi D, Miri R, Tayebi M (2022) Microstructure evolutions of Ti-Al-Nb alloys with different Ta addition, produced by mechanical alloying and spark plasma sintering. Mater Lett 323:132568. https://doi.org/10.1016/j.matlet.2022.13256810.1016/j.matlet.2022.132568 ↗
34. Tang H, Liu Y, Zhao D, Song M (2022) Achieving high strength and large ductility via Zr-rich stripes in Ti-15Zr alloy. Mater Lett 318:132194. https://doi.org/10.1016/j.matlet.2022.13219410.1016/j.matlet.2022.132194 ↗
35. Lin T, Song K, Shao H, Lu H (2022) Effect of Nb content on Ti–Mo–Nb alloy materials for neutron high pressure diffraction. Mater Lett 314:131821. https://doi.org/10.1016/j.matlet.2022.13182110.1016/j.matlet.2022.131821 ↗
36. Su G, Yun Z, Lin YC, He DG, Zhang S, Chen ZJ (2021) Microstructure evolution and a unified constitutive model of Ti-55511 alloy compressed at stepped strain rates. Materials 14:6750. https://doi.org/10.3390/ma1422675010.3390/ma14226750 ↗
37. Bazhina AD, Bazhin PM, Chizhikov AP, Konstantinov S, Stolin AM (2021) Influence of high-temperature annealing on structure of titanium aluminide materials obtained by combustion and high-temperature shear deformation. Intermet 139:107313. https://doi.org/10.1016/j.intermet.2021.10731310.1016/j.intermet.2021.107313 ↗
38. Straumal AB, Mazilkin IA, Tsoi KV, Baretzky B, Straumal BB (2020) “Wetting” phase transitions by the second solid phase for linear defects (grain boundary triple junctions). JETP Lett 112:257–261. https://doi.org/10.1134/S002136402016003110.1134/S0021364020160031 ↗
39. Chang LL, Su XJ, Qin JL (2022) Uneven microstructure in ZK60 alloy as a core of AZ31/ZK60 composite rods. Mater Lett 325:132666. https://doi.org/10.1016/j.matlet.2022.13266610.1016/j.matlet.2022.132666 ↗
40. Zhang S, Sun B, Wu RZ, Zhou Y, Wu Q (2022) Nanocrystalline strengthened Mg–Li alloy with a bcc structure prepared via heat treatment and rolling. Mater Lett 312:131680. https://doi.org/10.1016/j.matlet.2022.13168010.1016/j.matlet.2022.131680 ↗
41. Straumal A, Mazilkin I, Tzoy K, Straumal B, Bryła K, Baranchikov A, Eggeler G (2020) Bulk and surface low temperature phase transitions in the Mg-alloy EZ33A. Metals 10:1127. https://doi.org/10.3390/met1009112710.3390/met10091127 ↗
42. Xiao N, Zeng YZ, Lu XL, Sun YH, Sun BZ (2021) On the gamma ’ and W strengthening precipitates in Dy and Zn microalloyed magnesium alloys. Mater Lett 307:131028. https://doi.org/10.1016/j.matlet.2021.13102810.1016/j.matlet.2021.131028 ↗
43. Zhou TS, Guo FF, Zhang QF, Liu DX (2021) Offsetting strength-ductility tradeoff in Mg–Sn–Zn–Zr alloy by a novel differential-thermal ECAP process. Mater Lett 305:130764. https://doi.org/10.1016/j.matlet.2021.13076410.1016/j.matlet.2021.130764 ↗
44. Straumal B, Tsoy K, Druzhinin A, Orlov V, Khrapova N, Davdian G, Gerstein G, Straumal A (2023) Coexistence of intermetallic complexions and bulk particles in grain boundaries in the ZEK100 alloy. Metals 13:1407. https://doi.org/10.3390/met1308140710.3390/met13081407 ↗
45. Dong NN, Sun LX, Ma HB, Jin PP (2021) Effects of cryogenic treatment on microstructures and mechanical properties of Mg–2nd–4Zn alloy. Mater Lett 305:130699. https://doi.org/10.1016/j.matlet.2021.13069910.1016/j.matlet.2021.130699 ↗
46. Straumal B, Khrapova N, Druzhinin A, Tsoy K, Davdian G, Orlov V, Gerstein G, Straumal A (2023) Grain boundary wetting transition in the Mg-based ZEK 100 alloy. Crystals 13:1538. https://doi.org/10.3390/cryst1311153810.3390/cryst13111538 ↗
47. Guo HY, Liu SH, Huang L, Wang DQ, Du Y, Chu MQ (2021) Thermal conductivity of as-cast and annealed Mg-RE binary alloys. Metals 11:554. https://doi.org/10.3390/met1104055410.3390/met11040554 ↗
48. Astafurova E, Melnikov E, Astafurov S, Reunova K, Panchenko M, Moskvina V, Tumbusova I (2021) A comparative study of a solid solution hardening in carbon-alloyed FeMnCrNiCo0.95C0.05 high-entropy alloy subjected to different thermal–mechanical treatments. Mater Lett 285:129073. https://doi.org/10.1016/j.matlet.2020.12907310.1016/j.matlet.2020.129073 ↗
49. Yen S, Liu Y, Chu S, Chang C, Lin S, Tsai M-H (2022) B2-strengthened Al-Co-Cr-Fe-Ni high entropy alloy with high ductility. Mater Lett 325:132828. https://doi.org/10.1016/j.matlet.2022.13282810.1016/j.matlet.2022.132828 ↗
50. Straumal BB, Korneva A, Lopez GA, Kuzmin A, Rabkin E, Gerstein G, Straumal AB, Gornakova AS (2021) Grain boundary wetting by a second solid phase in the high entropy alloys: a review. Materials 14:7506. https://doi.org/10.3390/10.3390/ma1424750610.3390/10.3390/ma14247506 ↗
51. Shen QK, Kong XD, Chen XZ, Yao XK, Deev VB, Prusov ES (2021) Powder plasma arc additive manufactured CoCrFeNi(SiC)(x) high-entropy alloys: Microstructure and mechanical properties. Mater Lett 282:128736. https://doi.org/10.1016/j.matlet.2020.12873610.1016/j.matlet.2020.128736 ↗
52. Zhu XP, Gao N, Bai ZC, Wang K, Yao JQ, Fan ZT, Wang ZD, Liu XW (2022) Phase stability of a light-weight AlNb2TiV refractory high-entropy alloy at high temperature. Mater Lett 325:132897. https://doi.org/10.1016/j.matlet.2022.13289710.1016/j.matlet.2022.132897 ↗
53. Straumal BB, Korneva A, Kuzmin A, Lopez G, Rabkin E, Straumal AB, Gerstein G, Gornakova AS (2021) The grain boundary wetting phenomena in the Ti-containing high entropy alloys: a review. Metals 11:1881. https://doi.org/10.3390/met1111188110.3390/met11111881 ↗
54. Zhou Y, Kang J, Zhang J, Fu Z, Zhu L, She D (2022) Effect of vacuum heat treatment on microstructure and mechanical properties of HVOF sprayed AlCoCrFeNiCu high-entropy alloy coating. Mater Lett 323:132551. https://doi.org/10.1016/j.matlet.2022.13255110.1016/j.matlet.2022.132551 ↗
55. Straumal B, Rabkin E, Lopez GA, Korneva A, Kuzmin A, Gornakova AS, Valiev RZ, Straumal A, Baretzky B (2021) Grain boundary wetting phenomena in the high entropy alloys containing nitrides, carbides, borides, silicides, and hydrogen: a review. Crystals 11:1540. https://doi.org/10.3390/cryst1112154010.3390/cryst11121540 ↗
56. Deng N, Wang J, Wang JX, He YX, Beaugnon E, Li JS (2021) Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy. Mater Lett 303:130540. https://doi.org/10.1016/j.matlet.2021.13054010.1016/j.matlet.2021.130540 ↗
57. Sekhar RA, Shifin S, Kumar AA, Nair AH, Sudhees A, Krishnan J (2021) AlCoCrFeNiTi-C alloy with TiC nano precipitates processed through mechanical alloying and spark plasma sintering. Mater Lett 285:129185. https://doi.org/10.1016/j.matlet.2020.12918510.1016/j.matlet.2020.129185 ↗
58. Wadsworth J, Sherby OD (1980) On the bulat—Damascus steels revisited. Progr Mater Sci 25:35–68. https://doi.org/10.1016/0079-6425(80)90014-610.1016/0079-6425(80)90014-6 ↗
59. Sukhanov DA, Arkhangel’skii LB (2016) Damascus steel microstructure. Metallurgist 59:818–822. https://doi.org/10.1007/s11015-016-0178-x10.1007/s11015-016-0178-x ↗
60. Sukhanov DA, Plotnikova NV (2020) Mechanical properties of XVIII century Persian bulat steel compared with modern tool steels. Metallurgist 63:1192–1203. https://doi.org/10.1007/s11015-020-00942-910.1007/s11015-020-00942-9 ↗
61. Sukhanov DA (2023) Features of morphology of carbide banding of high-carbon steels with bulat structure. Metallurgist 67:111–122. https://doi.org/10.1007/s11015-023-01498-010.1007/s11015-023-01498-0 ↗
62. Efron LI, Stepanov PP, Zharkov SV, Chastukhin AV (2022) Investigation of low carbon pipeline steel weldability by welding thermal cycle simulation. Metallurgist 66:909–921. https://doi.org/10.1007/s11015-022-01403-110.1007/s11015-022-01403-1 ↗
63. Zharkov SV, Stepanov PP, Chastuhin AV, Bagmet OA, Efron LI (2023) Features (research) of the effect of microstructure on large diameter pipe welded joint impact strength. Metallurgist 66:1027–1039. https://doi.org/10.1007/s11015-023-01416-410.1007/s11015-023-01416-4 ↗
64. Kantor MM, Vorkachev KG, Stepanov PP, Zharkov SV, Efron LI, Bozhenov VA (2023) Impact toughness and microstructure of low-alloy steel weld produced by automatic submerged arc welding. Metallurgist 67:717–731. https://doi.org/10.1007/S11015-023-01561-W10.1007/S11015-023-01561-W ↗
65. Velikodnev VYa, Stepanov PP, Nastich SYu, Éfron LI, Shabalov IP, Bystrov ÉA, (2020) Effect of structural state of metal in weld fusion zone of large-diameter pipes on fracture mechanism and results of crack-resistance (CTOD) tests. Metallurgist 63:1054–1070. https://doi.org/10.1007/s11015-020-00924-x10.1007/s11015-020-00924-x ↗
66. Vorkachev KG, Stepanov PP, Éfron LI, Kantor MM, Chastukhin AV, Zharkov SV (2021) Effect of microstructure on high-strength low-alloy steel welded joint toughness with simulation of heat affected zone coarse-grained area. Metallurgist 64:875–884. https://doi.org/10.1007/s11015-021-01067-310.1007/s11015-021-01067-3 ↗
67. Romanenko VP, Romantsev BA, Illarionov GP, Fomin AV, Zimin VYa, Stepanov PP, (2014) Billet preparation method for railcar hollow axle production. Metallurgist 58:684–688. https://doi.org/10.1007/s11015-014-9977-010.1007/s11015-014-9977-0 ↗
68. Liu C, Du Y, Zhu S, Wang X, Yang X, Yan G, Liu B, You C, Jiang B (2024) Fabrication of a dual-phase ductile iron with an exceptional combination of strength and toughness. Mater Lett 361:136072. https://doi.org/10.1016/j.matlet.2024.13607210.1016/j.matlet.2024.136072 ↗
69. Wang X, Wu Z, Zhang N, Wang C, Yuan G (2024) An improved toughness process for high-temperature hot-rolled HSLA steel via inclusion-induced acicular ferrite nucleation. Mater Lett 360:135969. https://doi.org/10.1016/j.matlet.2024.13596910.1016/j.matlet.2024.135969 ↗
70. Wang Y, Liu X, Fan S, Dong X, Wei Q, Zheng K, Xiang H (2024) Effect of heat treatment on microstructure and tensile property of 420 martensitic stainless steel produced by binder jetting additive manufacturing. Mater Lett 354:135429. https://doi.org/10.1016/j.matlet.2023.13542910.1016/j.matlet.2023.135429 ↗
71. Zhang Y, Yu C, Dong J, Su J, Luo Z (2024) Microstructure and mechanical properties of T-joints in mid-thick Q345 steel plates welded using deep penetration tungsten inert gas welding. Mater Lett 354:135401. https://doi.org/10.1016/j.matlet.2023.13540110.1016/j.matlet.2023.135401 ↗
72. Mohapatra S, Das K, Das S (2024) Study on strain distribution and texture evolution of Fe-0,18C-4Al-7Mn steel under different strain rate conditions. Mater Lett 354:135343. https://doi.org/10.1016/j.matlet.2023.13534310.1016/j.matlet.2023.135343 ↗
73. Le V-T (2023) New insights into the surface features of SKD61 steel at heat-treated and non-heat-treated states as processed by powder-mixed EDM. Mater Lett 352:135199. https://doi.org/10.1016/j.matlet.2023.13519910.1016/j.matlet.2023.135199 ↗
74. Han S-C, Chaudry UM, Tariq HMR, Jun T-S (2023) Mitigating HAZ softening of friction stir welded ferrite-martensite DP steel followed by post weld heat treatment. Mater Lett 349:134881. https://doi.org/10.1016/j.matlet.2023.13488110.1016/j.matlet.2023.134881 ↗
75. Dlouhý J, Donik C (2023) Interphase precipitation of Cu in dual-phase steel. Mater Lett 348:134658. https://doi.org/10.1016/j.matlet.2023.13465810.1016/j.matlet.2023.134658 ↗
76. Khajuria A, Shiva S, Misra A (2023) The carbon content effect on hot-rolled C-Mn micro-alloyed E410 structural steel. Vacuum 212:112042. https://doi.org/10.1016/j.vacuum.2023.11204210.1016/j.vacuum.2023.112042 ↗
77. Reunova KA, Astafurova EG, Moskvina VA, Astafurov SV, Panchenko MYu, Melnikov EV, Kolubaev EA (2022) Microstructure and phase composition of a gradient material “stainless steel/Cr-Ni alloy” produced by electron-beam additive manufacturing. Russ Phys J 65:771–777. https://doi.org/10.1007/s11182-022-02696-010.1007/s11182-022-02696-0 ↗
78. Straumal BB, Kucheev YO, Efron LI, Petelin AL, Dutta Majumdar J, Manna I (2012) Complete and incomplete wetting of ferrite grain boundaries by austenite in the low-alloyed ferritic steel. J Mater Eng Perform 21:667–670. https://doi.org/10.1007/s11665-012-0130-610.1007/s11665-012-0130-6 ↗
79. Han K, Smith GDW, Edmonds DV (1995) Pearlite phase transformation in Si and V steel. Metall Mater Trans A 26:1617–1631. https://doi.org/10.1007/BF0267075010.1007/BF02670750 ↗
80. Saha A, Mondal DK, Biswas K, Maity J (2012) Development of high strength ductile hypereutectoid steel by cyclic heat treatment process. Mater Sci Eng A 541:204–215. https://doi.org/10.1016/j.msea.2012.02.02610.1016/j.msea.2012.02.026 ↗
81. Zhao F, Hu H, Liu X, Zhang Z, Xie J (2021) Effect of billet microstructure and deformation on austenite grain growth in forging heating of a medium-carbon microalloyed steel. J Alloys Compd 869:159326. https://doi.org/10.1016/j.jallcom.2021.15932610.1016/j.jallcom.2021.159326 ↗
82. Massalski TB et al (eds) (1993) Binary alloys phase diagrams. ASM International, Materials Park
83. Okamoto H (1992) The C-Fe (carbon-iron) system. J Phase Equil 13:543–56510.1007/BF02665767 ↗
84. Smith RP (1962) The diffusivity and solubility of carbon in alpha-iron. Trans Metall Soc AIME 224:105–111
85. Maksimova EL, Shvindlerman LS, Straumal BB (1988) Transformation of Σ17 special tilt boundaries to general boundaries in tin. Acta Metall 6:1573–1583. https://doi.org/10.1016/0001-6160(88)90225-810.1016/0001-6160(88)90225-8 ↗
86. Chang L-S, Rabkin E, Straumal BB, Hoffmann S, Baretzky B, Gust W (1998) Grain boundary segregation in the Cu–Bi system. Defect Diff Forum 156:135–146. https://doi.org/10.4028/www.scientific.net/DDF.156.13510.4028/www.scientific.net/DDF.156.135 ↗
87. Sursaeva VG, Straumal BB, Gornakova AS, Shvindlerman LS, Gottstein G (2008) Effect of faceting on grain boundary motion in Zn. Acta Mater 56:2728–2734. https://doi.org/10.1016/j.actamat.2008.02.01410.1016/j.actamat.2008.02.014 ↗
88. Straumal BB, Shvindlerman LS (1985) Regions of existence of special and non-special grain boundaries. Acta Metall 33:1735–1749. https://doi.org/10.1016/0001-6160(85)90168-310.1016/0001-6160(85)90168-3 ↗
89. Straumal BB, Bokstein BS, Straumal AB, Petelin AL (2008) First observation of a wetting transition in low-angle grain boundaries. JETP Lett 88:537–542. https://doi.org/10.1134/S002136400820014910.1134/S0021364008200149 ↗
90. Mazilkin I, Tsoy K, Straumal A, Rodin A, Baretzky B (2020) Grain boundary wetting of different types of grain boundaries in the Cu–Ag system. Mater Lett 272:127730. https://doi.org/10.1016/j.matlet.2020.12773010.1016/j.matlet.2020.127730 ↗