DataVXJournal of Materials SciencePaper
journal article·2025-02

Research progress on the high-temperature oxidation resistance and hot corrosion resistance of MCrAlY coatings

Jiale Tian, Chengxi Wang, Peng Song, Taihong Huang, Xiaowei Zhang, Jilin Lei, Tangfeng Yang, Vincent Ji

Journal of Materials Science· Volume 60· Issue 5
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloys

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Padture NP, Gell M, Jordan EH (2002) Thermal barrier coatings for gas-turbine engine applications. Science 296:280–284. https://doi.org/10.1126/science.106860910.1126/science.1068609 ↗
2. Texier D, Ecochard M, Gheno T, Monceau D, Salem M, Lours P (2021) Screening for Al2O3 failure in MCrAlY APS coatings using short-term oxidation at high temperature. Corros Sci 184:109334. https://doi.org/10.1016/j.corsci.2021.10933410.1016/j.corsci.2021.109334 ↗
3. Li C, Yuan X, Li D, Song P, Li Z, Huang T, Feng J, He Y, Zhai R, Li Q, Hua C, Huang W, Zhang D, Lu J (2022) Test atmospheres affecting voids distribution on MCrAlY-bond coats for TBCs at 1050 °C. Corros Sci 195:109967. https://doi.org/10.1016/j.corsci.2021.10996710.1016/j.corsci.2021.109967 ↗
4. Gao D, Shen Z, Chen K, Zhou X, Liu H, Wang J, Li Y, Liu Z, Deng H, Wang WY, Zeng X (2025) Review of progress in calculation and simulation of high-temperature oxidation. Prog Mater Sci 147:101348. https://doi.org/10.1016/j.pmatsci.2024.10134810.1016/j.pmatsci.2024.101348 ↗
5. Toscano J, Vaβen R, Gil A, Subanovic M, Naumenko D, Singheiser L, Quadakkers WJ (2006) Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC’s. Surf Coat Technol 201:3906–3910. https://doi.org/10.1016/j.surfcoat.2006.07.24710.1016/j.surfcoat.2006.07.247 ↗
6. Lu J, Zhang H, Chen Y, Zhao X, Guo F, Xiao P (2019) Effect of microstructure of a NiCoCrAlY coating fabricated by high-velocity air fuel on the isothermal oxidation. Corros Sci 159:108126. https://doi.org/10.1016/j.corsci.2019.10812610.1016/j.corsci.2019.108126 ↗
7. Chen Y, Zhao X, Xiao P (2018) Effect of microstructure on early oxidation of MCrAlY coatings. Acta Mater 159:150–162. https://doi.org/10.1016/j.actamat.2018.08.01810.1016/j.actamat.2018.08.018 ↗
8. Gil A, Shemet V, Vassen R, Subanovic M, Toscano J, Naumenko D, Singheiser L, Quadakkers WJ (2006) Effect of surface condition on the oxidation behaviour of MCrAlY coatings. Surf Coat Technol 201:3824–3828. https://doi.org/10.1016/j.surfcoat.2006.07.25210.1016/j.surfcoat.2006.07.252 ↗
9. Vasudev H, Thakur L, Singh H, Bansal A (2020) An investigation on oxidation behaviour of high velocity oxy-fuel sprayed Inconel718-Al2O3 composite coatings. Surf Coat Technol 393:125770. https://doi.org/10.1016/j.surfcoat.2020.12577010.1016/j.surfcoat.2020.125770 ↗
10. Kaur M, Singh H, Prakash S (2011) Surface engineering analysis of detonation-gun sprayed Cr3C2–NiCr coating under high-temperature oxidation and oxidation–erosion environments. Surf Coat Technol 206:530–541. https://doi.org/10.1016/j.surfcoat.2011.07.07710.1016/j.surfcoat.2011.07.077 ↗
11. Zhao Y, Bai Y, Yang J, Shen Y, Lou Y, Zhang K, Wu Y, Li Y, Li J, Cui Z, Wei T, Ma S, Shen Z, Wang H, Zeng X (2024) Autoclave grid-to-rod fretting wear behaviors of the Zr alloy fuel cladding with and without Cr coating through advanced characterization. Corros Sci 239:112379. https://doi.org/10.1016/j.corsci.2024.11237910.1016/j.corsci.2024.112379 ↗
12. Ju J, Yu H, Zhao Y, Yang T, Xiao B, Peng P, Wang R, Wang H, Zeng X, Wang J, Shen Z (2024) Understanding the oxidation behaviors of a ni-co-based superalloy at elevated temperatures through multiscale characterization. Corros Sci 227:111800. https://doi.org/10.1016/j.corsci.2023.11180010.1016/j.corsci.2023.111800 ↗
13. Shen M, Zhao P, Gu Y, Zhu S, Wang F (2015) High vacuum arc ion plating NiCrAlY coatings: Microstructure and oxidation behavior. Corros Sci 94:294–304. https://doi.org/10.1016/j.corsci.2015.02.03210.1016/j.corsci.2015.02.032 ↗
14. Xie S, Lin S, Shi Q, Wang W, Song C, Xu W, Dai M (2021) A study on the mechanical and thermal shock properties of MCrAlY coating prepared by arc ion plating. Surf Coat Technol 413:127092. https://doi.org/10.1016/j.surfcoat.2021.12709210.1016/j.surfcoat.2021.127092 ↗
15. Cai J, Yao Y, Wei J, Guan Q, Lyu P, Ye Y, Li Y (2021) Microstructure and transient oxidation behavior of NiCoCrAlYSiHf coating modified via high-current pulsed electron beam. Surf Coat Technol 422:127499. https://doi.org/10.1016/j.surfcoat.2021.12749910.1016/j.surfcoat.2021.127499 ↗
16. Cai J, Zu Z, Li C, Lyu P, Guan Q, Li Y (2020) Hot corrosion behavior of arc ion plating NiCoCrAlYSiHf coating via high-current pulsed electron beam. Oxid Met 94:569–586. https://doi.org/10.1007/s11085-020-10007-610.1007/s11085-020-10007-6 ↗
17. Cai J, Wei J, Zu Z, Guan Q, Lyu P (2022) Comparative hot corrosion performance of arc ion plated NiCoCrAlYSiHf coating in Na2SO4/NaCl/V2O5-media via high-current pulsed electron beam. Mater Charact 191:112074. https://doi.org/10.1016/j.matchar.2022.11207410.1016/j.matchar.2022.112074 ↗
18. Zhao Z, Wang J, Chen M, Zhang J, Wang F, Young DJ (2022) Comparative study on the initial oxidation behavior of conventional and nanocrystalline MCrAlY coatings - effect of microstructure evolution and dynamic mechanisms. Acta Mater 239:118264. https://doi.org/10.1016/j.actamat.2022.11826410.1016/j.actamat.2022.118264 ↗
19. Kalush A, Texier D, Ecochard M, Sirvin Q, Choquet K, Gheno T, Vanderesse N, Jomaa W, Bocher P (2022) Size effects on high temperature oxidation of MCrAlY coatings processed via APS and HVOF depositions. Surf Coat Technol 440:128483. https://doi.org/10.1016/j.surfcoat.2022.12848310.1016/j.surfcoat.2022.128483 ↗
20. Song P, Naumenko D, Vassen R, Singheiser L, Quadakkers WJ (2013) Effect of oxygen content in NiCoCrAlY bondcoat on the lifetimes of EB-PVD and APS thermal barrier coatings. Surf Coat Technol 221:207–213. https://doi.org/10.1016/j.surfcoat.2013.01.05410.1016/j.surfcoat.2013.01.054 ↗
21. Cai J, Gao C, Lv P, Zhang C, Guan Q, Lu J, Xu X (2019) Hot corrosion behaviour of thermally sprayed CoCrAlY coating irradiated by high-current pulsed electron beam. J Alloys Compd 784:1221–1233. https://doi.org/10.1016/j.jallcom.2019.01.07110.1016/j.jallcom.2019.01.071 ↗
22. Chen H (2018) Microstructure characterisation of un-melted particles in a plasma sprayed CoNiCrAlY coating. Mater Charact 136:444–451. https://doi.org/10.1016/j.matchar.2017.09.02010.1016/j.matchar.2017.09.020 ↗
23. Szymański K, Hernas A, Moskal G, Myalska H (2015) Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers - A review. Surf Coat Technol 268:153–164. https://doi.org/10.1016/j.surfcoat.2014.10.04610.1016/j.surfcoat.2014.10.046 ↗
24. Shibata M, Kuroda S, Murakami H, Ode M, Watanabe M, Sakamoto Y (2006) Comparison of microstructure and oxidation behavior of CoNiCrAlY bond coatings prepared by different thermal spray processes. Mater Trans 47:1638–1642. https://doi.org/10.2320/matertrans.47.163810.2320/matertrans.47.1638 ↗
25. Yang J, Wang L, Li D, Zhong X, Zhao H, Tao S (2017) Stress analysis and failure mechanisms of plasma-sprayed thermal barrier coatings. J Therm Spray Technol 26:890–901. https://doi.org/10.1007/s11666-017-0544-710.1007/s11666-017-0544-7 ↗
26. Li F, Xie Y, Yang L, Zhou Y, Zhu W (2021) Study on cyclic thermal corrosion behavior of APS-7YSZ thermal barrier coating at room- and high temperature. Ceram Int 47:29490–29498. https://doi.org/10.1016/j.ceramint.2021.07.11710.1016/j.ceramint.2021.07.117 ↗
27. Ghadami F, Aghdam ASR, Ghadami S (2021) A comprehensive study on the microstructure evolution and oxidation resistance of conventional and nanocrystalline MCrAlY coatings. Scientific Reports. https://doi.org/10.1038/s41598-020-79323-w10.1038/s41598-020-79323-w ↗
28. Shen Z, Tweddle D, Yu H, He G, Varambhia A, Karamched P, Hofmann F, Wilkinson AJ, Moody MP, Zhang L, Lozano-Perez S (2020) Microstructural understanding of the oxidation of an austenitic stainless steel in high-temperature steam through advanced characterization. Acta Mater 194:321–336. https://doi.org/10.1016/j.actamat.2020.05.01010.1016/j.actamat.2020.05.010 ↗
29. Dong L, Liu M-J, Zhang X-F, Zhuo X-S, Fan J-F, Yang G-J, Zhou K-S (2022) Pressure infiltration of molten aluminum for densification of environmental barrier coatings. J Adv Ceram 11:145–157. https://doi.org/10.1007/s40145-021-0523-910.1007/s40145-021-0523-9 ↗
30. Dong H, Yao J-T, Li X, Zhou Y, Li Y-B (2018) The sintering behavior of plasma-sprayed YSZ coating over the delamination crack in low temperature environment. Ceram Int 44:3326–3332. https://doi.org/10.1016/j.ceramint.2017.11.11310.1016/j.ceramint.2017.11.113 ↗
31. Liu T, Yao S-W, Wang L-S, Yang G-J, Li C-X, Li C-J (2016) Plasma-sprayed thermal barrier coatings with enhanced splat bonding for CMAS and corrosion protection. J Therm Spray Technol 25:213–221. https://doi.org/10.1007/s11666-015-0345-910.1007/s11666-015-0345-9 ↗
32. Shen Z, Chen K, Yu H, Jenkins B, Ren Y, Saravanan N, He G, Luo X, Bagot PAJ, Moody MP, Zhang L, Lozano-Perez S (2020) New insights into the oxidation mechanisms of a ferritic-martensitic steel in high-temperature steam. Acta Mater 194:522–539. https://doi.org/10.1016/j.actamat.2020.05.05210.1016/j.actamat.2020.05.052 ↗
33. Salam S, Hou PY, Zhang Y-D, Wang H-F, Zhang C, Yang Z-G (2015) Compositional effects on the high-temperature oxidation lifetime of MCrAlY type coating alloys. Corros Sci 95:143–151. https://doi.org/10.1016/j.corsci.2015.03.01110.1016/j.corsci.2015.03.011 ↗
34. Li SM, Fu LB, Zhang WL, Li W, Sun J, Wang TG, Jiang SM, Gong J, Sun C (2022) Formation process and oxidation behavior of MCrAlY + AlSiY composite coatings on a ni-based superalloy. J Mater Sci Technol 120:65–77. https://doi.org/10.1016/j.jmst.2021.10.05510.1016/j.jmst.2021.10.055 ↗
35. Li S, Yang X, Qi H, Xu G, Shi D (2016) Influence of MCrAlY coating on low-cycle fatigue behavior of a directionally solidified nickel-based superalloy in hot corrosive environment. Mater Sci Eng A 678:57–64. https://doi.org/10.1016/j.msea.2016.09.06410.1016/j.msea.2016.09.064 ↗
36. Sahu JK, Gupta RK, Swaminathan J, Paulose N, Mannan SL (2013) Influence of hot corrosion on low cycle fatigue behavior of nickel base superalloy SU 263. Int J Fatigue 51:68–73. https://doi.org/10.1016/j.ijfatigue.2013.02.00610.1016/j.ijfatigue.2013.02.006 ↗
37. Zhan X, Wang D, Dong J, Lou L, Zhang J (2023) Effect of coating degradation on the hot corrosion behaviour of directionally solidified superalloy. Corros Sci 215:111057. https://doi.org/10.1016/j.corsci.2023.11105710.1016/j.corsci.2023.111057 ↗
38. Chen K, Zhang L, Shen Z (2020) Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization. Acta Mater 194:156–167. https://doi.org/10.1016/j.actamat.2020.05.01610.1016/j.actamat.2020.05.016 ↗
39. Salehi Doolabi M, Ghasemi B, Sadrnezhaad SK, Habibollahzadeh A, Jafarzadeh K (2017) Hot corrosion behavior and near-surface microstructure of a “low-temperature high-activity Cr-aluminide” coating on inconel 738LC exposed to Na2SO4, Na2SO4+ V2O5 and Na2SO4+ V2O5+ NaCl at 900 °C. Corrosion Science 128:42–53. https://doi.org/10.1016/j.corsci.2017.09.00410.1016/j.corsci.2017.09.004 ↗
40. Shen Z, Zhang J, Wu S, Luo X, Jenkins BM, Moody MP, Lozano-Perez S, Zeng X (2022) Microstructure understanding of high cr-ni austenitic steel corrosion in high-temperature steam. Acta Mater 226:117634. https://doi.org/10.1016/j.actamat.2022.11763410.1016/j.actamat.2022.117634 ↗
41. Chen Z, Dong T, Qu W, Ru Y, Zhang H, Pei Y, Gong S, Li S (2019) Influence of cr content on hot corrosion and a special tube sealing test of single crystal nickel base superalloy. Corros Sci 156:161–170. https://doi.org/10.1016/j.corsci.2019.05.00110.1016/j.corsci.2019.05.001 ↗
42. Levin I, Brandon D (1998) Metastable alumina polymorphs: Crystal structures and transition sequences. J Am Ceram Soc 81:1995–2012. https://doi.org/10.1111/j.1151-2916.1998.tb02581.x10.1111/j.1151-2916.1998.tb02581.x ↗
43. Renusch D, Schorr M, Schütze M (2008) The role that bond coat depletion of aluminum has on the lifetime of APS-TBC under oxidizing conditions. Mater Corros 59:547–555. https://doi.org/10.1002/maco.20080413710.1002/maco.200804137 ↗
44. Liu T, Zhao Q, Li Y, Meng X, Feng X, Qu X, Zheng C, Huang Q, Xu W, Yang Y (2023) High-temperature oxidation behavior of inconel 693 alloy at 900 °C–1200 °C. Mater Charact 204:113216. https://doi.org/10.1016/j.matchar.2023.11321610.1016/j.matchar.2023.113216 ↗
45. Ju J, Shen Z, Kang M, Zhang J, Wang J (2022) On the preferential grain boundary oxidation of a Ni-Co-based superalloy. Corros Sci 199:110203. https://doi.org/10.1016/j.corsci.2022.11020310.1016/j.corsci.2022.110203 ↗
46. Ghadami F et al (2020) Mechanism of the oxide scale formation in thermally-sprayed NiCoCrAlY coatings modified by CeO2 nanoparticles. Materials Today Communications 24:101357. https://doi.org/10.1016/j.mtcomm.2020.10135710.1016/j.mtcomm.2020.101357 ↗
47. Mohammed G (2020) A critical review on nano structured coatings for alumina-titania (Al2O3-TiO2) deposited by air plasma spraying process (APS). Materials Today: Proceedings 22:1554–1562. https://doi.org/10.1016/j.matpr.2020.02.11710.1016/j.matpr.2020.02.117 ↗
48. Di Ferdinando M, Fossati A, Lavacchi A, Bardi U, Borgioli F, Borri C, Giolli C, Scrivani A (2010) Isothermal oxidation resistance comparison between air plasma sprayed, vacuum plasma sprayed and high velocity oxygen fuel sprayed CoNiCrAlY bond coats. Surf Coat Technol 204:2499–2503. https://doi.org/10.1016/j.surfcoat.2010.01.03110.1016/j.surfcoat.2010.01.031 ↗
49. Curry N, Tang Z, Markocsan N, Nylén P (2015) Influence of bond coat surface roughness on the structure of axial suspension plasma spray thermal barrier coatings — thermal and lifetime performance. Surf Coat Technol 268:15–23. https://doi.org/10.1016/j.surfcoat.2014.08.06710.1016/j.surfcoat.2014.08.067 ↗
50. Padmavathi G, Sarada BN, Shanmuganathan SP, Padmini BV, Mohan N (2020) Effects of high velocity oxy fuel thermal spray coating on mechanical and tribological properties of materials–A review. Mater Today Proc 27:2152–2157. https://doi.org/10.1016/j.matpr.2019.09.08510.1016/j.matpr.2019.09.085 ↗
51. Garces HF, Tran A, Sternlicht H, Miller M, Resnick M, Marino S, Choi WB, Padture NP (2020) Sea-salt-induced moderate-temperature degradation of thermally-sprayed MCrAlY bond-coats. Surf Coat Technol 404:126459. https://doi.org/10.1016/j.surfcoat.2020.12645910.1016/j.surfcoat.2020.126459 ↗
52. Guo RQ, Zhang C, Chen Q, Yang Y, Li N, Liu L (2011) Study of structure and corrosion resistance of fe-based amorphous coatings prepared by HVAF and HVOF. Corros Sci 53:2351–2356. https://doi.org/10.1016/j.corsci.2010.12.02210.1016/j.corsci.2010.12.022 ↗
53. Sadeghimeresht E, Markocsan N, Nylén P (2016) Microstructural and electrochemical characterization of ni-based bi-layer coatings produced by the HVAF process. Surf Coat Technol 304:606–619. https://doi.org/10.1016/j.surfcoat.2016.07.08010.1016/j.surfcoat.2016.07.080 ↗
54. Sadeghimeresht E, Markocsan N, Joshi S (2017) Isothermal oxidation behavior of HVAF-sprayed ni and NiCr coatings in H2–H2O environment. Surf Coat Technol 317:17–25. https://doi.org/10.1016/j.surfcoat.2017.03.04910.1016/j.surfcoat.2017.03.049 ↗
55. Sadeghimeresht E, Reddy L, Hussain T, Markocsan N, Joshi S (2018) Chlorine-induced high temperature corrosion of HVAF-sprayed ni-based alumina and chromia forming coatings. Corros Sci 132:170–184. https://doi.org/10.1016/j.corsci.2017.12.03310.1016/j.corsci.2017.12.033 ↗
56. Sansoucy E, Marcoux P, Ajdelsztajn L, Jodoin B (2008) Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process. Surf Coat Technol 202:3988–3996. https://doi.org/10.1016/j.surfcoat.2008.02.01710.1016/j.surfcoat.2008.02.017 ↗
57. Luo L, Shan X, Zou Z, Zhao C, Wang X, Zhang A, Zhao X, Guo F, Xiao P (2017) A high performance NiCoCrAlY bond coat manufactured using laser powder deposition. Corros Sci 126:356–365. https://doi.org/10.1016/j.corsci.2017.07.01810.1016/j.corsci.2017.07.018 ↗
58. Zhang P, Sadeghimeresht E, Chen S, Li X-H, Markocsan N, Joshi S, Chen W, Buyanova IA, Peng RL (2019) Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings. Surf Coat Technol 364:43–56. https://doi.org/10.1016/j.surfcoat.2019.02.06810.1016/j.surfcoat.2019.02.068 ↗
59. Xu CZ, Jiang SM, Bao ZB, Gong J, Sun C (2009) Isothermal oxidation behaviour of a gradient NiCoCrAlSiY coating deposited by arc ion plating on a ni-based single crystal superalloy. Corros Sci 51:1467–1474. https://doi.org/10.1016/j.corsci.2009.03.03610.1016/j.corsci.2009.03.036 ↗
60. Cheruvu NS, Wei R, Govindaraju MR, Gandy DW (2010) Cyclic oxidation behavior and microstructure of nanocrystalline ni–20Cr–4Al coating. Oxid Met 73:493–511. https://doi.org/10.1007/s11085-010-9189-310.1007/s11085-010-9189-3 ↗
61. Tan X, Peng X, Wang F (2014) The effect of grain refinement on the adhesion of an alumina scale on an aluminide coating. Corros Sci 85:280–286. https://doi.org/10.1016/j.corsci.2014.04.02210.1016/j.corsci.2014.04.022 ↗
62. Xie S, Dai M, Lin S, Shi Q, Song C, Hou H, Qiu W, Wang Y (2019) Effect of bias voltage on the oxidation resistance of NiCoCrAlYTa coatings prepared by arc ion plating. Corros Sci 147:330–341. https://doi.org/10.1016/j.corsci.2018.11.03010.1016/j.corsci.2018.11.030 ↗
63. Li WZ, Li YQ, Gong J, Sun C, Jiang X (2010) Interfacial strength and oxidation resistance of the NiCrAlYSi coating with a diffusion barrier and/or buffer layer on DSM11 deposited by continuous arc ion plating. Mater Sci Eng A 527:2678–2683. https://doi.org/10.1016/j.msea.2009.12.03510.1016/j.msea.2009.12.035 ↗
64. Li WZ, Li YQ, Wang QM, Sun C, Jiang X (2010) Oxidation of a NiCrAlYSi overlayer with or without a diffusion barrier deposited by one-step arc ion plating. Corros Sci 52:1753–1761. https://doi.org/10.1016/j.corsci.2010.02.02210.1016/j.corsci.2010.02.022 ↗
65. Zhu L, Zhu S, Wang F (2012) Preparation and oxidation behaviour of nanocrystalline Ni + CrAlYSiN composite coating with AlN diffusion barrier on Ni-based superalloy K417. Corros Sci 60:265–274. https://doi.org/10.1016/j.corsci.2012.03.02710.1016/j.corsci.2012.03.027 ↗
66. Hussain T (2012) Cold spraying of titanium: A review of bonding mechanisms, microstructure and properties. Key Eng Mater 533:53–90. https://doi.org/10.4028/www.scientific.net/KEM.533.5310.4028/www.scientific.net/KEM.533.53 ↗
67. Karaoglanli AC, Turk A (2017) Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray technique. Surf Coat Technol 318:72–81. https://doi.org/10.1016/j.surfcoat.2016.12.02110.1016/j.surfcoat.2016.12.021 ↗
68. Stoltenhoff T, Borchers C, Gärtner F, Kreye H (2006) Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings. Surf Coat Technol 200:4947–4960. https://doi.org/10.1016/j.surfcoat.2005.05.01110.1016/j.surfcoat.2005.05.011 ↗
69. Ning X-J, Jang J-H, Kim H-J, Li C-J (2008) Changhee Lee, Cold spraying of al–sn binary alloy: Coating characteristics and particle bonding features. Surf Coat Technol 202:1681–1687. https://doi.org/10.1016/j.surfcoat.2007.07.02610.1016/j.surfcoat.2007.07.026 ↗
70. Raoelison RN, Verdy Ch, Liao H (2017) Cold gas dynamic spray additive manufacturing today: Deposit possibilities, technological solutions and viable applications. Mater Des 133:266–287. https://doi.org/10.1016/j.matdes.2017.07.06710.1016/j.matdes.2017.07.067 ↗
71. Guo D, Zhao L, Jodoin B (2021) Cold spray for production of in-situ nanocrystalline MCrAlY coatings – part II: Isothermal oxidation performance. Surf Coat Technol 409:126828. https://doi.org/10.1016/j.surfcoat.2021.12682810.1016/j.surfcoat.2021.126828 ↗
72. Koivuluoto H, Milanti A, Bolelli G, Lusvarghi L, Vuoristo P (2014) High-pressure cold-sprayed ni and ni-cu coatings: Improved structures and corrosion properties. J Therm Spray Technol 23:98–103. https://doi.org/10.1007/s11666-013-0016-710.1007/s11666-013-0016-7 ↗
73. Li Y, Li C-J, Yang G-J, Xing L-K (2010) Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying. Surf Coat Technol 205:2225–2233. https://doi.org/10.1016/j.surfcoat.2010.08.14410.1016/j.surfcoat.2010.08.144 ↗
74. Akella Srikanth G, Basha MT, Venkateshwarlu B (2020) A brief review on cold spray coating process. Materials Today: Proceedings 22:1390–1397. https://doi.org/10.1016/j.matpr.2020.01.48210.1016/j.matpr.2020.01.482 ↗
75. Raoelison RN, Aubignat E, Planche M-P, Costil S, Langlade C, Liao H (2016) Low pressure cold spraying under 6 bar pressure deposition: Exploration of high deposition efficiency solutions using a mathematical modelling. Surf Coat Technol 302:47–55. https://doi.org/10.1016/j.surfcoat.2016.05.06810.1016/j.surfcoat.2016.05.068 ↗
76. Choy K (2003) Chemical vapour deposition of coatings. Prog Mater Sci 48:57–170. https://doi.org/10.1016/S0079-6425(01)00009-310.1016/S0079-6425(01)00009-3 ↗
77. Liu C, Chen Y, Qiu L, Liu H, Bai M, Xiao P (2020) The al-enriched γ’-Ni3Al-base bond coat for thermal barrier coating applications. Corros Sci 167:108523. https://doi.org/10.1016/j.corsci.2020.10852310.1016/j.corsci.2020.108523 ↗
78. Warnes BM (2003) Improved aluminide/MCrAlX coating systems for super alloys using CVD low activity aluminizing. Surf Coat Technol 163–164:106–111. https://doi.org/10.1016/S0257-8972(02)00602-310.1016/S0257-8972(02)00602-3 ↗
79. Mehta A, Vasudev H, Singh S, Prakash C, Saxena KK, Linul E, Buddhi D, Xu J (2022) Processing and advancements in the development of thermal barrier coatings: A review. Coatings 12:1318. https://doi.org/10.3390/coatings1209131810.3390/coatings12091318 ↗
80. Put AV, Oquab D, Péré E, Raffaitin A, Monceau D (2011) Beneficial effect of pt and of pre-oxidation on the oxidation behaviour of an NiCoCrAlYTa bond-coating for thermal barrier coating systems. Oxidation of Metals 75:247–279. https://doi.org/10.1007/s11085-011-9241-y10.1007/s11085-011-9241-y ↗
81. Chen H, Zhang C, Xuan J, Liu B, Yang G, Gao Y, Luo H (2020) Effect of TGO evolution and element diffusion on the life span of YSZ/pt–Al and YSZ/NiCrAlY coatings at high temperature. Ceram Int 46:813–823. https://doi.org/10.1016/j.ceramint.2019.09.03710.1016/j.ceramint.2019.09.037 ↗
82. Cadoret Y, Monceau D, Bacos M-P, Josso P, Maurice V, Marcus P (2005) Effect of platinum on the growth rate of the oxide scale formed on cast nickel aluminide intermetallic alloys. Oxid Met 64:185–205. https://doi.org/10.1007/s11085-005-6558-410.1007/s11085-005-6558-4 ↗
83. Li YY, Zhang C, Ji HZ, Jiang YM, Liu TY, Li S, Bao ZB, Xu N, Zhu SL, Wang FH (2024) Pt-modification on the thermal cycling behavior of NiCoCrAlYTa coating: A case study. Corros Sci 230:111934. https://doi.org/10.1016/j.corsci.2024.11193410.1016/j.corsci.2024.111934 ↗
84. Liu C, Chen Y, Eggeman AS, Brewster G, Xiao P (2020) Pt effect on early stage oxidation behaviour of pt-diffused γ-ni/γ’-Ni3Al coatings. Acta Mater 189:232–247. https://doi.org/10.1016/j.actamat.2020.03.01310.1016/j.actamat.2020.03.013 ↗
85. Lau H (2013) Influence of yttria on the cyclic lifetime of YSZ TBC deposited on EB-PVD NiCoCrAlY bondcoats and its contribution to a modified TBC adhesion mechanism. Surf Coat Technol 235:121–126. https://doi.org/10.1016/j.surfcoat.2013.07.02210.1016/j.surfcoat.2013.07.022 ↗
86. Wang Z, Shen Z, Liu Y, Zhao Y, Zhu Q, Chen Y, Wang J, Li Y, Lozano-Perez S, Zeng X (2024) The effect of LPSO phase on the high-temperature oxidation of a stainless Mg-Y-Al alloy. J Magnes Alloys 12:4045–4052. https://doi.org/10.1016/j.jma.2024.07.00910.1016/j.jma.2024.07.009 ↗
87. Yang H, Huang X, Guo J, Wang R, Jin J, Cai J, Guo H, Ye Y, Hua Y (2022) High temperature oxidation resistance of arc ion plating NiCoCrAlY coating modified via laser shock peening. J Alloys Compd 911:164708. https://doi.org/10.1016/j.jallcom.2022.16470810.1016/j.jallcom.2022.164708 ↗
88. Guo H, Wang D, Peng H, Gong S, Xu H (2014) Effect of sm, gd, yb, sc and nd as reactive elements on oxidation behaviour of β-NiAl at 1200 °C. Corros Sci 78:369–377. https://doi.org/10.1016/j.corsci.2013.10.02110.1016/j.corsci.2013.10.021 ↗
89. Wang X, Szpunar JA (2017) Effect of CeO2 coating on the isothermal oxidation behaviour of ni-based alloy 230. Oxid Met 88:565–582. https://doi.org/10.1007/s11085-016-9692-210.1007/s11085-016-9692-2 ↗
90. Li C, Song P, Feng J, Huang T, Lü K, Li Q, Duan W, Khan A, Zhai R, Lu J (2019) Alumina growth behaviour on the surface-modified NiCoCrAl alloy by pt and hf at high temperature. Appl Surf Sci 479:1178–1191. https://doi.org/10.1016/j.apsusc.2019.02.17910.1016/j.apsusc.2019.02.179 ↗
91. Xu MM, Li YY, Zhang CY, Jiang CY, Bao ZB, Zhu SL, Wang FH (2022) Synergistic effect of re-base diffusion barrier and pt modification on the oxidation behaviour of NiCrAlY coatings. Corros Sci 194:109919. https://doi.org/10.1016/j.corsci.2021.10991910.1016/j.corsci.2021.109919 ↗
92. Duan W, Huang B, Li Y, Huang X, Zhou M, Qiang W (2023) Hf and Ta co-doping MCrAlY alloy to improve the lifetime of coatings. Surf Coat Technol 468:129781. https://doi.org/10.1016/j.surfcoat.2023.12978110.1016/j.surfcoat.2023.129781 ↗
93. An TF, Guan HR, Sun XF, Hu ZQ (2000) Effect of the θ–α-Al2O3 transformation in scales on the oxidation behavior of a nickel-base superalloy with an aluminide diffusion coating. Oxid Met 54:301–316. https://doi.org/10.1023/A:100465442968710.1023/A:1004654429687 ↗
94. Liu H, Huang J, Wang Z, Qiu Z, Zheng Z, Wu Y, Yuan S, Zeng D (2023) Composite structure of YSZ embedded in NiCoCrAlTaY bond coat induces thin and multilayered Al2O3 film to extend the thermal cycle life of thermal barrier coatings. Surf Coat Technol 475:130104. https://doi.org/10.1016/j.surfcoat.2023.13010410.1016/j.surfcoat.2023.130104 ↗
95. Liu H, Wang Z, Li W, Qiu Z, Zheng Z, Wang G, Huang J, Zeng D (2024) Structural evolution and enhanced thermal cycling life of HVAF-sprayed NiCrAlY bond coat modified by YSZ. J Mater Res Technol 30:5133–5144. https://doi.org/10.1016/j.jmrt.2024.04.21210.1016/j.jmrt.2024.04.212 ↗
96. Tao S, Yang J, Shao F, Zhao H, Zhong X, Zhuang Y, Sheng J, Ni J, Li Q, Tao S (2022) Atmospheric plasma sprayed thick thermal barrier coatings: Microstructure, thermal shock behaviors and failure mechanism. Eng Fail Anal 131:105819. https://doi.org/10.1016/j.engfailanal.2021.10581910.1016/j.engfailanal.2021.105819 ↗
97. Liu J, Xie Y, Jiang X, Zhao F, Meng R, Yang L, Zhou Y (2024) Improving the oxidation resistance of NiCrAlY-coated superalloy by Zr/ZrN diffusion barrier. Surf Coat Technol 476:130255. https://doi.org/10.1016/j.surfcoat.2023.13025510.1016/j.surfcoat.2023.130255 ↗
98. Gu D, Xia M, Dai D (2019) On the role of powder flow behavior in fluid thermodynamics and laser processability of ni-based composites by selective laser melting. Int J Mach Tools Manuf 137:67–78. https://doi.org/10.1016/j.ijmachtools.2018.10.00610.1016/j.ijmachtools.2018.10.006 ↗
99. Matsumoto M, Hayakawa K, Kitaoka S, Matsubara H, Takayama H, Kagiya Y, Sugita Y (2006) The effect of pre-oxidation atmosphere on oxidation behavior and thermal cycle life of thermal barrier coatings. Mater Sci Eng A 441:119–125. https://doi.org/10.1016/j.msea.2006.08.09910.1016/j.msea.2006.08.099 ↗
100. Negami M, Hibino S, Kawano A, Nomura Y, Tanaka R, Igashira K (2018) Development of highly durable thermal barrier coating by suppression of thermally grown oxide. J Eng Gas Turbines Power 140:082101. https://doi.org/10.1115/1.403860710.1115/1.4038607 ↗