journal article·2022-02Open access

Highly ordered pure and indium-incorporated MCM-41 mesoporous adsorbents: synthesis, characterization and evaluation for dye removal

Rabab K. Khaled, Mohammed A. Wahba, Magda D. Badry, M. F. Zawrah, E. A. Heikal

Journal of Materials Science· Volume 57· Issue 7

Abstract

Abstract Highly ordered pure MCM-41 and In-MCM-41 mesoporous adsorbents (with Si/In = 95 (IM0.05) and Si/In = 90 (IM0.1)) were synthesized using the hydrothermal-assisted method. The structural, morphological and texture characteristics were investigated by XRD, N2adsorption–desorption, SEM-EDX, TEM, diffuse reflectance (DR) and FTIR. The broadening XRD diffraction peaks as well as the shifts to higher and lower 2-theta in IM0.05 and IM0.1, respectively, confirmed the incorporation of indium atoms in the MCM-41 structure. SEM-EXD and TEM images showed that pure MCM-41 and IM0.05 preserve a highly long-range well-ordered hexagonal pore structure, on the other hand, high loading of indium (IM0.1) resulted in partially irregular pore-ordering and morphological defects related to a partial dissolution of MCM-41 structure. The infrared spectra of In-incorporated samples showed a decrease in the transmittance intensity of MCM-41 characteristic peaks with little shifts relative to the pure MCM-41 sample. The potential of pure MCM-41 and In-MCM-41 samples for adsorption of dyes was preliminarily investigated. The removal efficiency of both methylene blue and basic yellow-28 (BY28) was enhanced by the incorporation of indium in the MCM-41. The adsorption equilibrium data of BY28 dye on pure, IM0.05 and IM0.1 samples fitted well with Langmuir adsorption model with adsorption capacity of 123.46, 156.99 and 158.48 mg g−1respectively. The calculated free adsorption energy obtained from D–R isotherm was found to be 26.7 kJ mol−1referring to that the adsorption of BY28 on IM0.05 adsorbent is chemical. The adsorption kinetic of BY28 on IM0.05 sample followed the pseudo-second-order model. The adsorption experiments revealed that the prepared samples can be used as effective adsorbents for the removal of dyes in aqueous solutions with good recovery and recyclability. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Mesoporous Materials and Catalysis · Metal-Organic Frameworks: Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. Benkhaya S, M’rabet S, El Harfi A (2020) A review on classifications, recent synthesis and applications of textile dyes. Inorg Chem Commun 115:107891–10792510.1016/j.inoche.2020.107891 ↗
2. Pokhrel D, Viraraghavan T (2004) Treatment of pulp and paper mill wastewater: a review. Sci Total Environ 333:37–58. https://doi.org/10.1016/j.scitotenv.2004.05.01710.1016/j.scitotenv.2004.05.017 ↗
3. Dubenska L, Dmukhailo A, Tvorynska S, Rydchuk P, Dubenska L (2020) Synthetic food dyes–some aspects of use and methods of determination. Methods Objects Chem Anal 15:5–2010.17721/moca.2020.5-20 ↗
4. Wan S, Li L, Liu J, Liu B, Li G, Zhang L, Liu Y (2020) An imide-decorated indium-organic framework for efficient and selective capture of carcinogenic dyes with diverse adsorption interactions. Cryst Growth Des 20:3199–320710.1021/acs.cgd.0c00066 ↗
5. Kongor A, Panchal M, Athar M, Vora M, Makwana B, Jha P, Jain V (2021) Calix [4] pyrrole stabilized PdNPs as an efficient heterogeneous catalyst for enhanced degradation of water-soluble carcinogenic Azo dyes. Catal Lett 151:548–55810.1007/s10562-020-03304-x ↗
6. Zhao X, Wang X, Song G, Lou T (2020) Microwave assisted copolymerization of sodium alginate and dimethyl diallyl ammonium chloride as flocculant for dye removal. Int J Biol Macromol 156:585–59010.1016/j.ijbiomac.2020.04.054 ↗
7. Liu C, Wang X, Qin L, Li H, Liang W (2021) Magnetic coagulation and flocculation of a kaolin suspension using Fe3O4 coated with SiO2. J Environ Chem Eng 9:105980–10599010.1016/j.jece.2021.105980 ↗
8. Mok CF, Ching YC, Muhamad F, Osman NAA, Dai Hai N, Hassan CRC (2020) Adsorption of dyes using poly (vinyl alcohol)(PVA) and PVA-based polymer composite adsorbents: a review. J Polym Environ 28:775–79310.1007/s10924-020-01656-4 ↗
9. Drweesh SA, Fathy NA, Wahba MA, Hanna AA, Akarish AIM, Elzahany EAM, El-Sherif IY, Abou-El-Sherbini KS (2016) Equilibrium, kinetic and thermodynamic studies of Pb(II) adsorption from aqueous solutions on HCl-treated Egyptian kaolin. J Environ Chem Eng 4:1674–1684. https://doi.org/10.1016/j.jece.2016.02.00510.1016/j.jece.2016.02.005 ↗
10. Wahba MA, Yakout SM, Mohamed WAA, Galal HR (2020) Remarkable photocatalytic activity of Zr doped ZnO and ZrO2/ZnO nanocomposites: Structural, morphological and photoluminescence properties. Mater Chem Phys 256:123754–123765. https://doi.org/10.1016/j.matchemphys.2020.12375410.1016/j.matchemphys.2020.123754 ↗
11. Wahba MA, Yakout SM (2019) Innovative visible light photocatalytic activity for V-doped ZrO2 structure: optical, morphological, and magnetic properties. J Sol-Gel Sci Technol 92:628–640. https://doi.org/10.1007/s10971-019-05103-210.1007/s10971-019-05103-2 ↗
12. Lee C-K, Liu S-S, Juang L-C, Wang C-C, Lin K-S, Lyu M-D (2007) Application of MCM-41 for dyes removal from wastewater. J Hazard Mater 147:997–100510.1016/j.jhazmat.2007.01.130 ↗
13. Forgacs E, Cserhati T, Oros G (2004) Removal of synthetic dyes from wastewaters: a review. Environ Int 30:953–97110.1016/j.envint.2004.02.001 ↗
14. Chunfeng W, Jiansheng L, Lianjun W, Xiuyun S, Huang J (2009) Adsorption of dye from wastewater by zeolites synthesized from fly ash: kinetic and equilibrium studies. Chin J Chem Eng 17:513–52110.1016/S1004-9541(08)60239-6 ↗
15. Yener J, Kopac T, Dogu G, Dogu T (2006) Adsorption of Basic Yellow 28 from aqueous solutions with clinoptilolite and amberlite. J Colloid Interface Sci 294:255–26410.1016/j.jcis.2005.07.040 ↗
16. Slimani R, El Ouahabi I, Abidi F, El Haddad M, Regti A, Laamari MR, El Antri S, Lazar S (2014) Calcined eggshells as a new biosorbent to remove basic dye from aqueous solutions: thermodynamics, kinetics, isotherms and error analysis. J Taiwan Inst Chem Eng 45:1578–158710.1016/j.jtice.2013.10.009 ↗
17. Mouni L, Belkhiri L, Bollinger J-C, Bouzaza A, Assadi A, Tirri A, Dahmoune F, Madani K, Remini H (2018) Removal of Methylene Blue from aqueous solutions by adsorption on Kaolin: kinetic and equilibrium studies. Appl Clay Sci 153:38–4510.1016/j.clay.2017.11.034 ↗
18. Aravindhan R, Rao JR, Nair BU (2007) Removal of basic yellow dye from aqueous solution by sorption on green alga Caulerpa scalpelliformis. J Hazard Mater 142:68–7610.1016/j.jhazmat.2006.07.058 ↗
19. Chen C-Y, Li H-X, Davis ME (1993) Studies on mesoporous materials: I. Synthesis and characterization of MCM-41. Microporous Mater 2:17–2610.1016/0927-6513(93)80058-3 ↗
20. Costa JAS, de Jesus RA, Santos DO, Mano JF, Romao LP, Paranhos CM (2020) Recent progresses in the adsorption of organic, inorganic, and gas compounds by MCM-41-based mesoporous materials. Microporous Mesoporous Mater 291:109698–10971810.1016/j.micromeso.2019.109698 ↗
21. Veregue FR, de Lima HH, Ribeiro SC, Almeida MS, da Silva CT, Guilherme MR, Rinaldi AW (2020) MCM-41/chondroitin sulfate hybrid hydrogels with remarkable mechanical properties and superabsorption of methylene blue. Carbohydr Polym 247:116558–11658710.1016/j.carbpol.2020.116558 ↗
22. Collard X, Li L, Lueangchaichaweng W, Bertrand A, Aprile C, Pescarmona PP (2014) Ga-MCM-41 nanoparticles: synthesis and application of versatile heterogeneous catalysts. Catal Today 235:184–19210.1016/j.cattod.2014.02.055 ↗
23. Shao Y, Wang X, Kang Y, Shu Y, Sun Q, Li L (2014) Application of Mn/MCM-41 as an adsorbent to remove methyl blue from aqueous solution. J Colloid Interface Sci 429:25–3310.1016/j.jcis.2014.05.004 ↗
24. Zhao J, Zhang Y, Xu L, Tian F, Hu T, Meng C (2020) Weak base favoring the synthesis of highly ordered V-MCM-41 with well-dispersed vanadium and the catalytic performances on selective oxidation of benzyl alcohol. Chin J Chem Eng 28:1424–143510.1016/j.cjche.2020.02.027 ↗
25. Costa JA, de Jesus RA, Santos DO, Neris JB, Figueiredo RT, Paranhos CM (2021) Synthesis, functionalization, and environmental application of silica-based mesoporous materials of the M41S and SBA-n families: a review. J Environ Chem Eng 9:105259–10528810.1016/j.jece.2021.105259 ↗
26. Katok KV, Tertykh VA, Brichka SY, Prikhod’ko GP (2006) Pyrolytic synthesis of carbon nanostructures on Ni Co, Fe/MCM-41 catalysts. Mater Chem Phys 96:396–401. https://doi.org/10.1016/j.matchemphys.2005.07.02910.1016/j.matchemphys.2005.07.029 ↗
27. Zhao D, Wan Y, Zhou W (2012) Ordered mesoporous materials. Wiley, Hoboken
28. Rashwan WE, Abou-El-Sherbini KS, Wahba MA, Ahmed SAS, Weidler PG (2019) High stable Al-MCM-41: structural characterization and evaluation for removal of methylene blue from aqueous solution. Silicon 12:2017–202910.1007/s12633-019-00262-x ↗
29. Kumar R, Shah S, Bahadur J, Melnichenko YB, Sen D, Mazumder S, Vinod CP, Chowdhury B (2016) Highly stable In-SBA-15 catalyst for vapor phase Beckmann rearrangement reaction. Microporous Mesoporous Mater 234:293–30210.1016/j.micromeso.2016.07.024 ↗
30. Guari Y, Soulantica K, Philippot K, Thieuleux C, Mehdi A, Reyé C, Chaudret B, Corriu RJ (2003) Indium and indium-oxide nanoparticle or nanorod formation within functionalised ordered mesoporous silica. New J Chem 27:1029–103110.1039/B302867B ↗
31. Boehlmann W, Klepel O, Michel D, Papp H (2002) Studies in surface science and catalysis. Elsevier, Amsterdam
32. Luan Z, Cheng C-F, Zhou W, Klinowski J (1995) Mesopore molecular sieve MCM-41 containing framework aluminum. J Phys Chem 99:1018–102410.1021/j100003a026 ↗
33. Pârvulescu V, Tablet C, Anastasescu C, Su B (2004) Activity and stability of bimetallic Co (V, Nb, La)-modified MCM-41 catalysts. Catal Today 93:307–31310.1016/j.cattod.2004.06.006 ↗
34. He N-Y, Bao S-L, Xu Q-H (1997) Synthesis and characterization of FeSiMCM-41 and LaSiMCM-41. Stud Surf Sci Catal 105:85–92. https://doi.org/10.1016/S0167-2991(97)80542-310.1016/S0167-2991(97)80542-3 ↗
35. Chatterjee M, Iwasaki T, Onodera Y, Nagase T, Hayashi H, Ebina T (2000) Characterization of ordered mesoporous gallium MCM-41 synthesized at room temperature. Chem Mater 12:1654–165910.1021/cm990739b ↗
36. Molaei S, Ghadermazi M (2019) Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Appl Organomet Chem 33:e4972–e498910.1002/aoc.4972 ↗
37. Alardhi SM, Albayati TM, Alrubaye JM (2020) Adsorption of the methyl green dye pollutant from aqueous solution using mesoporous materials MCM-41 in a fixed-bed column. Heliyon 6:e03253–e0325910.1016/j.heliyon.2020.e03253 ↗
38. Xue B, Xu J, Liu P, Lv L, Xu C, Li Y, Zhang K (2012) Acid–base properties of TiO2-modified MCM-41 mesoporous silica and its catalytic performance for ortho-selective ethylation of phenol with diethyl carbonate. J Mol Catal A Chem 357:50–5810.1016/j.molcata.2012.01.018 ↗
39. Mansour F, Dimeo R, Peemoeller H (2002) High-resolution inelastic neutron scattering from water in mesoporous silica. Phys Rev E 66:041307–041331310.1103/PhysRevE.66.041307 ↗
40. Cheng C-F, He H, Zhou W, Klinowski J, Gonçalves JAS, Gladden LF (1996) Synthesis and characterization of the gallosilicate mesoporous molecular sieve MCM-41. J Phys Chem 100:390–39610.1021/jp952410t ↗
41. Okumura K, Nishigaki K, Niwa M (2001) Prominent catalytic activity of Ga-containing MCM-41 in the Friedel-Crafts alkylation. Microporous Mesoporous Mater 44:509–51610.1016/S1387-1811(01)00228-1 ↗
42. Campos JM, Lourenço JP, Fernandes A, Ribeiro MR (2008) Mesoporous Ga-MCM-41: a very efficient support for the heterogenisation of metallocene catalysts. Catal Commun 10:71–7310.1016/j.catcom.2008.07.038 ↗
43. Kruk M, Jaroniec M, Sakamoto Y, Terasaki O, Ryoo R, Ko CH (2000) Determination of pore size and pore wall structure of MCM-41 by using nitrogen adsorption, transmission electron microscopy, and X-ray diffraction. J Phys Chem B 104:292–30110.1021/jp992718a ↗
44. Kruk M, Jaroniec M, Sayari A (1997) Adsorption study of surface and structural properties of MCM-41 materials of different pore sizes. J Phys Chem B 101:583–58910.1021/jp962000k ↗
45. Suvanto S, Hukkamäki J, Pakkanen T, Pakkanen T (2000) High-cobalt-loaded MCM-41 via the gas-phase method. Langmuir 16:4109–411510.1021/la991176l ↗
46. Larsson P-O, Andersson A (1998) Complete oxidation of CO, ethanol, and ethyl acetate over copper oxide supported on titania and ceria modified titania. J Catal 179:72–8910.1006/jcat.1998.2198 ↗
47. Liu Z, Zhou R, Zheng X (2007) Comparative study of different methods of preparing CuO-CeO2 catalysts for preferential oxidation of CO in excess hydrogen. J Mol Catal A Chem 267:137–14210.1016/j.molcata.2006.11.036 ↗
48. Park SH, Kim BH, Selvaraj M, Lee TG (2007) Synthesis and characterization of mesoporous Ce-Mn-MCM-41 molecular sieves. J Ind Eng Chem 13:637–643
49. Shi Y, Liu C, Zhuo J, Yao Q (2020) Investigation of a Ni-modified MCM-41 catalyst for the reduction of oxygenates and carbon deposits during the Co-pyrolysis of cellulose and polypropylene. ACS Omega 5:20299–2031010.1021/acsomega.0c02205 ↗
50. Pauwels B, Van Tendeloo G, Thoelen C, Van Rhijn W, Jacobs PA (2001) Structure determination of spherical MCM-41 particles. Adv Mater 13:1317–132010.1002/1521-4095(200109)13:17<1317::AID-ADMA1317>3.0.CO;2-5 ↗
51. Cheng C-F, Park DH, Klinowski J (1997) Optimal parameters for the synthesis of the mesoporous molecular sieve [Si]-MCM-41. J Chem Soc Faraday Trans 93:193–19710.1039/a605100f ↗
52. Lin HP, Cheng YR, Lin CR, Li FY, Chen CL, Wong ST, Cheng S, Liu SB, Wan BZ, Mou CY (1999) The synthesis and application of the mesoporous molecular sieves MCM-41: a review. J Chin Chem Soc 46:495–50710.1002/jccs.199900067 ↗
53. Bhattacharyya S, Lelong G, Saboungi M-L (2006) Recent progress in the synthesis and selected applications of MCM-41: a short review. J Exp Nanosci 1:375–39510.1080/17458080600812757 ↗
54. Shionoya S, Yen WM, Yamamoto H (2018) Phosphor handbook. CRC Press, Boca Raton
55. Chandradass J, Bae DS, Kim KH (2011) A simple method to prepare indium oxide nanoparticles: structural, microstructural and magnetic properties. Adv Powder Technol 22:370–37410.1016/j.apt.2010.05.006 ↗
56. Zhao J, Ge S, Pan D, Pan Y, Murugadoss V, Li R, Xie W, Lu Y, Wu T, Wujcik EK (2019) Microwave hydrothermal synthesis of In2O3-ZnO nanocomposites and their enhanced photoelectrochemical properties. J Electrochem Soc 166:H3074–H308310.1149/2.0071905jes ↗
57. Agger JR, Anderson MW, Pemble ME, Terasaki O, Nozue Y (1998) Growth of quantum-confined indium phosphide inside MCM-41. J Phys Chem B 102:3345–335310.1021/jp972994u ↗
58. Hu Y, Nagai Y, Rahmawaty D, Wei C, Anpo M (2008) Characteristics of the photocatalytic oxidation of methane into methanol on V-containing MCM-41 catalysts. Catal Lett 124:80–8410.1007/s10562-008-9491-8 ↗
59. Higashimoto S, Matsuoka M, Yamashita H, Anpo M, Kitao O, Hidaka H, Che M, Giamello E (2000) Effect of the Si/Al ratio on the local structure of V Oxide/ZSM-5 catalysts prepared by solid-state reaction and their photocatalytic reactivity for the decomposition of NO in the absence and presence of propane. J Phys Chem B 104:10288–1029210.1021/jp000983m ↗
60. Bourlange A, Payne D, Egdell R, Foord J, Edwards P, Jones M, Schertel A, Dobson P, Hutchison J (2008) Growth of In2O3 (100) on Y-stabilized ZrO2 (100) by O-plasma assisted molecular beam epitaxy. Appl Phys Lett 92:092117–09212010.1063/1.2889500 ↗
61. Bierwagen O (2015) Indium oxide: a transparent, wide-band gap semiconductor for (opto) electronic applications. Semicond Sci Technol 30:024001–02401610.1088/0268-1242/30/2/024001 ↗
62. Bierwagen O, Speck JS, Nagata T, Chikyow T, Yamashita Y, Yoshikawa H, Kobayashi K (2011) Depletion of the In2O3 (001) and (111) surface electron accumulation by an oxygen plasma surface treatment. Appl Phys Lett 98:172101–17210410.1063/1.3583446 ↗
63. Casas-Orozco D, Alarcón E, Carrero CA, Venegas JM, McDermott W, Klosterman E, Hermans I, Villa A-L (2017) Influence of tin loading and pore size of Sn/MCM-41 catalysts on the synthesis of nopol. Ind Eng Chem Res 56:6590–659810.1021/acs.iecr.7b00789 ↗
64. Yun G-N, Ahn S-J, Takagaki A, Kikuchi R, Oyama ST (2019) Infrared spectroscopic studies of the hydrodeoxygenation of γ-valerolactone on Ni2P/MCM-41. Catal Today 323:54–6110.1016/j.cattod.2018.07.054 ↗
65. Kololi KA, Qomsheh SMT, Noei M, Saberi M (2021) Enhanced gas permeation performance of mixed matrix membranes containing polysulfone and modified mesoporous MCM-41. J Serbian Chem Soc 86:871–88410.2298/JSC210219034A ↗
66. Xie D, Jiang Y, Zhang Y, Song B (2021) Salt-resistant switchable pickering emulsions stabilized by mesoporous nanosilica hydrophobized in situ by pH-insensitive surfactants. Langmuir 37:5846–585310.1021/acs.langmuir.1c00231 ↗
67. Selvam P, Bhatia SK, Sonwane CG (2001) Recent advances in processing and characterization of periodic mesoporous MCM-41 silicate molecular sieves. Ind Eng Chem Res 40:3237–3261. https://doi.org/10.1021/ie001066610.1021/ie0010666 ↗
68. Goyal N, Bulasara VK, Li G, Liu L (2021) Rapid uptake of atrazine from aqueous phase by thermally activated MCM-41. Sci Total Environ 753:142091–14210210.1016/j.scitotenv.2020.142091 ↗
69. Khalil KMS (2007) Cerium modified MCM-41 nanocomposite materials via a nonhydrothermal direct method at room temperature. J Colloid Interface Sci 315:562–56810.1016/j.jcis.2007.07.030 ↗
70. Zholobenko V, Holmes S, Cundy C, Dwyer J (1997) Synthesis of MCM-41 materials: an in situ FTIR study. Microporous Mater 11:83–8610.1016/S0927-6513(97)00033-3 ↗
71. Mal NK, Kumar P, Fujiwara M, Kuraoka K (2002) Studies in surface science and catalysis. Elsevier, Amsterdam
72. Mal NK, Ramaswamy V, Ganapathy S, Ramaswamy A (1994) Synthesis and characterization of crystalline, tin-silicate molecular sieves with MFI structure. J Chem Soc Chem Commun. https://doi.org/10.1039/C3994000193310.1039/C39940001933 ↗
73. Liu J, Yin D, Qin L, Yin D (2005) Studies in surface science and catalysis. Elsevier, Amsterdam
74. Raji F, Pakizeh M (2013) Study of Hg (II) species removal from aqueous solution using hybrid ZnCl2-MCM-41 adsorbent. Appl Surf Sci 282:415–42410.1016/j.apsusc.2013.05.145 ↗
75. Aksu Z, Kabasakal E (2004) Batch adsorption of 2, 4-dichlorophenoxy-acetic acid (2, 4-D) from aqueous solution by granular activated carbon. Sep Purif Technol 35:223–24010.1016/S1383-5866(03)00144-8 ↗
76. Huang X, Li R, Mo F, Zhang R, Deng W (2021) An innovative approach to recycle boron waste by mesoporous silica production and its application in methylene blue removal. J Environ Chem Eng 9:105327–10533610.1016/j.jece.2021.105327 ↗
77. Yurdakoç M, Seki Y, Karahan S, Yurdakoç K (2005) Kinetic and thermodynamic studies of boron removal by Siral 5, Siral 40, and Siral 80. J Colloid Interface Sci 286:440–44610.1016/j.jcis.2004.12.047 ↗
78. Alkaim AF, Alqaraguly MB (2013) Adsorption of basic yellow dye from aqueous solutions by activated carbon derived from waste apricot stones (ASAC): equilibrium, and thermodynamic aspects. Int J Chem Sci 11:797–814
79. Olgun A, Atar N (2009) Equilibrium and kinetic adsorption study of Basic Yellow 28 and Basic Red 46 by a boron industry waste. J Hazard Mater 161:148–15610.1016/j.jhazmat.2008.03.064 ↗
80. Tehrani-Bagha A, Nikkar H, Mahmoodi N, Markazi M, Menger F (2011) The sorption of cationic dyes onto kaolin: kinetic, isotherm and thermodynamic studies. Desalination 266:274–28010.1016/j.desal.2010.08.036 ↗
81. Tekin N, Şafaklı A, Bingöl D (2015) Process modeling and thermodynamics and kinetics evaluation of Basic Yellow 28 adsorption onto sepiolite. Desalin Water Treat 54:2023–203510.1080/19443994.2014.893843 ↗
82. Turabik M (2008) Adsorption of basic dyes from single and binary component systems onto bentonite: simultaneous analysis of Basic Red 46 and Basic Yellow 28 by first order derivative spectrophotometric analysis method. J Hazard Mater 158:52–64. https://doi.org/10.1016/j.jhazmat.2008.01.03310.1016/j.jhazmat.2008.01.033 ↗
83. Chaari I, Fakhfakh E, Medhioub M, Jamoussi F (2019) Comparative study on adsorption of cationic and anionic dyes by smectite rich natural clays. J Mol Struct 1179:672–677. https://doi.org/10.1016/j.molstruc.2018.11.03910.1016/j.molstruc.2018.11.039 ↗
84. Ouahabi IE, Slimani R, Hachoumi I, Anouar F, Taoufik N, Elmchaouri A, Lazar S (2015) Adsorption of a cationic dye (yellow basic 28) ontothe calcined mussel shells: kinetics, isotherm and thermodynamic parameters. Mediterr J Chem 4:261–270
85. El Ouahabi I, Slimani R, Benkaddour S, Hiyane H, Rhallabi N, Cagnon B, El Haddad M, El Antri S, Lazar S (2018) Adsorption of textile dye from aqueous solution onto a low cost conch shells. J Mater Environ Sci 20189:1987–1988
86. Dao SD, Nguyen B, Tran THT (2013) Adsorption of basic yellow 28 in aqueous solution by activated carbon. Asian J Chem 25:2173–217610.14233/ajchem.2013.13381 ↗
87. Khosla E, Kaur S, Dave PN (2013) Tea waste as adsorbent for ionic dyes. Desalin Water Treat 51:6552–656110.1080/19443994.2013.791776 ↗
88. Huang C-H, Chang K-P, Ou H-D, Chiang Y-C, Wang C-F (2011) Adsorption of cationic dyes onto mesoporous silica. Microporous Mesoporous Mater 141:102–10910.1016/j.micromeso.2010.11.002 ↗
89. Pan JM, Cheng Y, Wei YY (2012) Advanced materials research. Trans Tech Publications, Freienbach
90. Yu Z-H, Zhai S-R, Guo H, Song Y, Zhang F, Ma H-C (2018) Removal of methylene blue over low-cost mesoporous silica nanoparticles prepared with naturally occurring diatomite. J Sol-Gel Sci Technol 88:541–55010.1007/s10971-018-4859-8 ↗
91. Zhou C, Gao Q, Luo W, Zhou Q, Wang H, Yan C, Duan P (2015) Preparation, characterization and adsorption evaluation of spherical mesoporous Al-MCM-41 from coal fly ash. J Taiwan Inst Chem Eng 52:147–15710.1016/j.jtice.2015.02.014 ↗
92. Yuan N, Cai H, Liu T, Huang Q, Zhang X (2019) Adsorptive removal of methylene blue from aqueous solution using coal fly ash-derived mesoporous silica material. Adsorpt Sci Technol 37:333–34810.1177/0263617419827438 ↗
93. Ho KY, McKay G, Yeung KL (2003) Selective adsorbents from ordered mesoporous silica. Langmuir 19:3019–302410.1021/la0267084 ↗
94. Liu X, Hu Y, Huang J, Wei C (2016) Detailed characteristics of adsorption of bisphenol A by highly hydrophobic MCM-41 mesoporous molecular sieves. Res Chem Intermed 42:7169–718310.1007/s11164-016-2526-7 ↗