Investigation on the microstructure, wear and corrosion resistance of FeCoNiCrMox high-entropy alloy coatings deposited on 40Cr by laser cladding
Source abstract
Abstract
Many engineering structural parts, such as internal gear pumps, worked in high-salt and high-temperature environments. The material (40Cr) of the parts in the pump failed due to severe wear and corrosion. To improve the wear resistance and corrosion resistance of 40Cr, the FeCoNiCrMox (x = 0, 0.3, 0.6, 0.9, 1.2) HEAs coatings were deposited on the surface of 40Cr by laser cladding technology, and the phase structure, microstructure and hardness of the coatings were investigated. In addition, friction and wear tests, electrochemical tests and neutral salt spray tests were conducted to investigate the effect of Mo content on the wear resistance and corrosion resistance of the coatings. The results showed that the phase structure of the FeCoNiCrMo0 coating was the FCC phase, and the phase of the FeCoNiCrMox (x = 0.3, 0.6, 0.9, 1.2) coatings were composed of the FCC phase and σ phase. The Mo element was enriched in interdendrite. With the increasing content of Mo elements, solid solution strengthening, fine grain strengthening, and second phase strengthening occurred in the coatings, which led to the increased hardness and wear resistance of the coatings. The FeCoNiCrMo1.2 coating had the best wear resistance. In the 3.5%NaCl solution, the corrosion resistance of the coatings was better than that of the substrate. With the increase of Mo content, the corrosion potential of the coatings drifted positively, the corrosion current density decreased, and the corrosion resistance increased. However, with excessive Mo element content, the σ phase will precipitate, leading to galvanic coupling corrosion of the coatings and reducing the corrosion resistance. Because the FeCoNiCrMo0.9 coating had the highest corrosion potential and the lowest corrosion current density. Therefore, it had the best corrosion resistance. The neutral salt spray test result also showed that the corrosion resistance of the FeCoNiCrMo0.9 coating was the best.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Zhou F, Yuan Y, Wang X, Wang M (2009) Influence of nitrogen ion implantation fluences on surface structure and tribological properties of SiC ceramics in water-lubrication. Appl Surf Sci 255:5079–5087. https://doi.org/10.1016/j.apsusc.2008.12.07110.1016/j.apsusc.2008.12.071 ↗
2. Yamamoto K, Mastukado K (2006) Effect of hydrogenated DLC coatings hardness on the tribological properties under water lubrication. Tribol Int 39:1609–1614. https://doi.org/10.1016/j.triboint.2006.01.00410.1016/j.triboint.2006.01.004 ↗
3. Sun F, Shuai R, Zhong L, Liu ZY, Li X, Du C (2016) Comparative study on the stress corrosion cracking of X70 pipeline steel in simulated shallow and deep sea environments. Mat Sci Eng A 685:145–153. https://doi.org/10.1016/j.msea.2016.12.11810.1016/j.msea.2016.12.118 ↗
4. Chen C, Liu N, Zhang J, Cao J, Xiang HF (2019) Microstructure stability and oxidation behaviour of (FeCoNiMo)90(Al/Cr)10 high-entropy alloys. Mater Sci Tech-lond 35:1–8. https://doi.org/10.1080/02670836.2019.165278510.1080/02670836.2019.1652785 ↗
5. Wang W, Wang J, Sun Z, Li J, Yang X (2019) Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-Mo high-entropy alloys. J Alloy Compd 812:152139. https://doi.org/10.1016/j.jallcom.2019.15213910.1016/j.jallcom.2019.152139 ↗
6. Cheng H, Fang Y, Xu J, Zhu C, Xue S (2019) Tribological properties of nano/ultrafine-grained FeCoCrNiMnAlx high-entropy alloys over a wide range of temperatures. J Alloy Compd 817:153305. https://doi.org/10.1016/j.jallcom.2019.15330510.1016/j.jallcom.2019.153305 ↗
7. Chen M, Lan L, Shi X, Zhang M, Qiao J (2019) The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature. J Alloy Compd 777:180–189. https://doi.org/10.1016/j.jallcom.2018.10.39310.1016/j.jallcom.2018.10.393 ↗
8. Wang HJ, Zhang W, Peng YB, Zhang MY, Liu Y (2020) Microstructures and wear resistance of FeCoCrNi-Mo high entropy alloy/diamond composite coatingss by high speed laser cladding. Coatingss 10:300. https://doi.org/10.3390/coatingss1003030010.3390/coatingss10030300 ↗
9. Malatji N, Lengopeng T, Pityana S, Popoola API (2021) Microstructural, mechanical and electrochemical properties of AlCrFeCuNiWx high entropy alloys. J Mater Res Technol 11:1594–1603. https://doi.org/10.1016/j.jmrt.2021.01.10310.1016/j.jmrt.2021.01.103 ↗
10. Wen X, Cui X, Jin G, Liu Y, Fang Y (2021) In-situ synthesis of nano-lamellar Ni1.5CrCoFe0.5Mo0.1Nbx eutectic high-entropy alloy coatingss by laser cladding: alloy design and microstructure evolution. Surf Coat Tech 405:126728. https://doi.org/10.1016/j.surfcoat.2020.12672810.1016/j.surfcoat.2020.126728 ↗
11. Zhang H, He Y, Pan Y (2013) Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening. Scripta Mater 69:342–345. https://doi.org/10.1016/j.scriptamat.2013.05.02010.1016/j.scriptamat.2013.05.020 ↗
12. Menghani J, Vyas A, Patel P, Natu H, More S (2021) Wear, erosion and corrosion behavior of laser cladded high entropy alloy coatings—a review. Mater Today: Proc 38:2824–2829. https://doi.org/10.1016/j.matpr.2020.08.76310.1016/j.matpr.2020.08.763 ↗
13. He H, Zhang T, Ma M, Liu WJ (2017) Microstructure and wear resistance of laser cladding particulate reinforced Fe-based composite coatings on railway steel. J Laser Appl 29:022503. https://doi.org/10.2351/1.498323210.2351/1.4983232 ↗
14. Cui C, Wu MP, Miao XJ, Zhao ZS, Gong YL (2022) Microstructure and corrosion behavior of CeO2/ FeCoNiCrMo high-entropy alloy coatings prepared by laser cladding. J Alloy Compd 890:161826. https://doi.org/10.1016/j.jallcom.2021.16182610.1016/j.jallcom.2021.161826 ↗
15. Li WJ, Guo WM, Zhang HL, Xu HH, Chen L, Zeng JS, Liu B, Ding ZB (2022) Influence of Mo on the Microstructure and Corrosion Behavior of Laser Cladding FeCoCrNi High-Entropy Alloy Coatingss. Entropy 24(4):539. https://doi.org/10.3390/e2404053910.3390/e24040539 ↗
16. Gu Z, Peng W, Guo W, Zhang Y, Xi S (2021) Design and characterization on microstructure evolution and properties of laser-cladding Ni1.5CrFeTi2B0.5Mox high-entropy alloy coatingss. Surf Coat Tech 408:126793. https://doi.org/10.1016/j.surfcoat.2020.12679310.1016/j.surfcoat.2020.126793 ↗
17. Anburaj J, Nazirudeen S, Narayanan R, Anandavel B, Chandrasekar A (2012) Ageing of forged superaustenitic stainless steel: Precipitate phases and mechanical properties. Mat Sci Eng A 535:99–107. https://doi.org/10.1016/j.msea.2011.12.04810.1016/j.msea.2011.12.048 ↗
18. Hao Y, Cao G, Li C, Li J, Liu W, Zhang W, Liu Z (2019) The aging precipitation behavior of 20Cr-24Ni-6Mo super-austenitic stainless steel processed by conventional casting and twin-roll strip casting. Mater Charact 147:21–30. https://doi.org/10.1016/j.matchar.2018.10.01510.1016/j.matchar.2018.10.015 ↗
19. Ezuber HM, El-Houd A, El-Shawesh F (2007) Effects of sigma phase precipitation on seawater pitting of duplex stainless steel. Desalination 207:268–275. https://doi.org/10.1016/j.desal.2006.05.02110.1016/j.desal.2006.05.021 ↗
20. Kim YJ, Kim SW, Kim HB, Choi YI, Park CJ (2019) Effects of the precipitation of secondary phases on the erosion-corrosion of 25% Cr duplex stainless steel. Corros Sci 152:202–210. https://doi.org/10.1016/j.corsci.2019.03.00610.1016/j.corsci.2019.03.006 ↗
21. Chou YL, Yeh JW, Shih HC (2010) The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments[J]. CORROS SCI 25:2571–2581. https://doi.org/10.1016/j.corsci.2010.04.00410.1016/j.corsci.2010.04.004 ↗
22. Zhou SF, Xu YB, Liao BQ, Sun Y, Dai X, Yang J, Li Z (2018) Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatingss by laser cladding. Opt Laser Technol 103:8–16. https://doi.org/10.1016/j.optlastec.2018.01.02410.1016/j.optlastec.2018.01.024 ↗
23. Shi XY, Wen DS, Wang SR, Wang GQ, Xue CL (2021) Investigation on friction and wear performance of laser cladding Ni-based alloy coatings on brake disc. Optik 242:167227. https://doi.org/10.1016/j.ijleo.2021.16722710.1016/j.ijleo.2021.167227 ↗
24. Wang JZ, Chen J, Chen BB, Yan FY, Xue QJ (2012) Wear behaviors and wear mechanisms of several alloys under simulated deep-sea environment covering seawater hydrostatic pressure. TRIBOL INT 56:38–46. https://doi.org/10.1016/j.triboint.2012.06.02110.1016/j.triboint.2012.06.021 ↗
25. Chandra K, Singhal R, Kain V, Raja VS (2010) Low temperature embrittlement of duplex stainless steel: Correlation between mechanical and electrochemical behavior. Mat Sci Eng A 527:3904–3912. https://doi.org/10.1016/j.msea.2010.02.06910.1016/j.msea.2010.02.069 ↗
26. Fu YQ, Zhou F, Wang QZ, Zhang MD, Zhou ZF (2020) Electrochemical and tribocorrosion performances of CrMoSiCN coatings on Ti-6Al-4V titanium alloy in artificial seawater—ScienceDirect. Corros Sci 165:108385. https://doi.org/10.1016/j.corsci.2019.10838510.1016/j.corsci.2019.108385 ↗
27. Lee JB (2006) Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique. Mater Chem Phys 99:224–234. https://doi.org/10.1016/j.matchemphys.2005.10.01610.1016/j.matchemphys.2005.10.016 ↗
28. Pardo A, Merino MC, Coy AE, Viejo F, Arrabal R, Matykina E (2008) Pitting corrosion behaviour of austenitic stainless steels—combining effects of Mn and Mo additions. Corros Sci 50:1796–1806. https://doi.org/10.1016/j.corsci.2008.04.00510.1016/j.corsci.2008.04.005 ↗