Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Shi XL, Zou J, Chen ZG (2020) Advanced thermoelectric design: from materials and structures to devices. Chem Rev 120(15):7399–751510.1021/acs.chemrev.0c00026 ↗
2. Wang Y, Yang L, Shi XL, Shi X, Chen LD, Dargusch MS, Zou J, Chen ZG (2019) Flexible thermoelectric materials and generators: challenges and innovations. Adv Mater 31(29):180791610.1002/adma.201807916 ↗
3. Dargusch M, Liu WD, Chen ZG (2020) Thermoelectric generators: alternative power supply for wearable electrocardiographic systems. Adv Sci 7(18):200136210.1002/advs.202001362 ↗
4. Zhang Q, Sun Y, Xu W, Zhu DB (2014) Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently. Adv Mater 26(40):6829–685110.1002/adma.201305371 ↗
5. Choo S, Ejaz F, Ju HJ, Kim F, Lee J, Yang SE, Kim G, Kim H, Jo S, Baek S (2021) Cu2Se-based thermoelectric cellular architectures for efficient and durable power generation. Nat Commun 12(1):1–1110.1038/s41467-021-23944-w ↗
6. Butt FK, Ul Haq B, Rehman SU, Ahmed R, Cao CB, AlFaifi S (2017) Investigation of thermoelectric properties of novel cubic phase SnSe: a promising material for thermoelectric applications. J Alloys Compd 715:438–444. https://doi.org/10.1016/j.jallcom.2017.05.00310.1016/j.jallcom.2017.05.003 ↗
7. Sootsman JR, Chung DY, Kanatzidis MG (2009) New and old concepts in thermoelectric materials. Angew Chem Int Ed 48(46):8616–863910.1002/anie.200900598 ↗
8. Zhu TJ, Fu CG, Xie HH, Liu YT, Zhao XB (2015) High-efficiency half-Heusler thermoelectric materials for energy harvesting. Adv Energy Mater 5(19):150058810.1002/aenm.201500588 ↗
9. Liu ZH, Mao J, Liu TH, Chen G, Ren Z (2018) Nano-microstructural control of phonon engineering for thermoelectric energy harvesting. MRS Bull 43(3):181–18610.1557/mrs.2018.7 ↗
10. Mao J, Liu ZH, Zhou JW, Zhu HT, Zhang Q, Chen G, Ren ZF (2018) Advances in thermoelectrics. Adv Phys 67(2):69–14710.1080/00018732.2018.1551715 ↗
11. Heremans JP, Jovovic V, Toberer ES, Saramat A, Kurosaki K, Charoenphakdee A, Yamanaka S, Snyder GJ (2008) Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states. Science 321(5888):554–55710.1126/science.1159725 ↗
12. Poudel B, Hao Q, Ma Y, Lan YC, Minnich A, Yu B, Yan XA, Wang DZ, Muto A, Vashaee D, Chen XY, Liu JM, Dresselhaus MS, Chen G, Ren ZF (2008) High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys. Science 320(5876):634–638. https://doi.org/10.2307/2005514010.2307/20055140 ↗
13. Paul B, Lu J, Eklund P (2017) Nanostructural tailoring to induce flexibility in thermoelectric Ca3Co4O9 thin films. ACS Appl Mater Interfaces 9(30):25308–2531610.1021/acsami.7b06301 ↗
14. Eklund P, Kerdsongpanya S, Alling B (2016) Transition-metal-nitride-based thin films as novel energy harvesting materials. J Mater Chem C 4(18):3905–391410.1039/C5TC03891J ↗
15. Kim GH, Shao L, Zhang K, Pipe KP (2013) Engineered doping of organic semiconductors for enhanced thermoelectric efficiency. Nat Mater 12(8):719–72310.1038/nmat3635 ↗
16. Hu GH, Kang J, Ng LWT, Zhu XX, Howe RCT, Jones CG, Hersam MC, Hasan T (2018) Functional inks and printing of two-dimensional materials. Chem Soc Rev 47(9):3265–330010.1039/C8CS00084K ↗
17. Bubnova O, Khan ZU, Wang H, Braun S, Evans DR, Fabretto M, Hojati-Talemi P, Dagnelund D, Arlin JB, Geerts YH, Desbief S, Breiby DW, Andreasen JW, Lazzaroni R, Chen WMM, Zozoulenko I, Fahlman M, Murphy PJ, Berggren M, Crispin X (2014) Semi-metallic polymers. Nat Mater 13(2):190–19410.1038/nmat3824 ↗
18. Du Y, Cai KF, Chen S, Cizek P, Lin T (2014) Preparation and thermoelectric properties of Bi2Te3 based alloy nanosheet/PEDOT: PSS composite films. ACS Appl Mater Interfaces 6(8):5735–574310.1021/am5002772 ↗
19. See KC, Feser JP, Chen CE, Majumda A, Urban JJ (2010) Segalman RA (2010) Water-processable polymer-nanocrystal hybrids for thermoelectrics. Nano Lett 10(11):4664–466710.1021/nl102880k ↗
20. Du Y, Liu X, Xu JY, Shen SZ (2019) Flexible Bi-Te-based alloy nanosheet/PEDOT: PSS thermoelectric power generators. Mater Chem Front 3(7):1328–133410.1039/C9QM00087A ↗
21. Ju H, Kim J (2016) Chemically exfoliated SnSe nanosheets and their SnSe/poly (3, 4-ethylene dioxythiophene): poly (styrenesulfonate) composite films for polymer based thermoelectric applications. ACS Nano 10(6):5730–573910.1021/acsnano.5b07355 ↗
22. Du Y, Shen SZ, Cai KF, Casey PS (2012) Research progress on polymer-inorganic thermoelectric nanocomposite materials. Prog Polym Sci 37(6):820–84110.1016/j.progpolymsci.2011.11.003 ↗
23. Peng J, Witting I, Geisendorfer N, Wang M, Chang M, Jakus A, Kenel C, Yan X, Shah R, Snyder GJ (2019) Grayson M (2019) 3D extruded composite thermoelectric threads for flexible energy harvesting. Nat Commun 10(1):1–810.1038/s41467-019-13461-2 ↗
24. Chen Y, Hou XN, Ma CY, Dou YK, Wu WT (2018) Review of development status of Bi2Te3-based semiconductor thermoelectric power generation. Adv Mater Sci Eng 1:1–9
25. Wan JF, Chen S (2005) Martensitic transformation and shape memory effect in Fe-Mn-Si based alloys. Curr Opin Solid State Mater Sci 9(6):303–31210.1016/j.cossms.2006.07.005 ↗
26. Ohta H, Sugiura K, Koumoto K (2008) Recent progress in oxide thermoelectric materials: p-type Ca3Co4O9 and n-type SrTiO3-. Inorg Chem 47(19):8429–843610.1021/ic800644x ↗
27. Rull-Bravo M, Moure A, Fernández JF, Martin-Gonzalez M (2015) Skutterudites as thermoelectric materials: revisited. Rsc Adv 5(52):41653–4166710.1039/C5RA03942H ↗
28. Yang DW, Bai H, Su XL, Li Z, Luo TT, Li J, Tang H, Luo H, Zhang QJ, Uher C, Wu JS, Tang XF (2021) Atomic mechanism of ionic confinement in the thermoelectric Cu2Se based on a low-cost electric-current method. Cell Rep Phys Sci 2(2):10034510.1016/j.xcrp.2021.100345 ↗
29. Elphick K, Frost W, Samiepour M, Kubota T, Takanashi K, Sukegawa H, Mitani S, Hirohata A (2021) Heusler alloys for spintronic devices: review on recent development and future perspectives. Sci Technol Adv Mater 22(1):235–27110.1080/14686996.2020.1812364 ↗
30. Pei YZ, Shi XY, LaLonde A, Wang H, Chen LD, Snyder GJ (2011) Convergence of electronic bands for high performance bulk thermoelectrics. Nature 473(7345):66–6910.1038/nature09996 ↗
31. Cui JL, Xue HF, Xiu WJ (2006) Microstructures and thermoelectric properties of p-type pseudo-binary AgxBi0.5Sb1.5-xTe3 (x=0.05 – 0.4) alloys prepared by cold pressing. Mater Lett 60(29–30):3669–367210.1016/j.matlet.2006.03.080 ↗
32. Wang Y, Sui Y, Wang XH, Su WH, Liu XY (2010) Enhanced high-temperature thermoelectric characteristics of transition metals doped Ca3Co4O9+δ by cold high-pressure fabrication. J Appl Phys 107(3):03370810.1063/1.3291125 ↗
33. Ma Y, Hao Q, Poudel B, Lan YC, Yu B, Wang DZ, Chen G, Ren ZF (2008) Enhanced thermoelectric figure-of-merit in p-type nanostructured bismuth antimony tellurium alloys made from elemental chunks. Nano Lett 8(8):2580–2584. https://doi.org/10.1021/nl800992810.1021/nl8009928 ↗
34. Pokharel M, Dahal T, Ren ZS, Czajka P, Wilson S, Ren ZF, Opeil C (2014) Thermoelectric properties of CeAl3 prepared by hot-press method. Energy Convers Manage 87:584–58810.1016/j.enconman.2014.07.050 ↗
35. Xie WJ, He J, Kang HJ, Tang XF, Zhu S, Laver M, Wang SY, Copley JRD, Brown CM, Zhang QJ, Tritt TM (2010) Identifying the specific nanostructures responsible for the high thermoelectric performance of (Bi, Sb)2Te3 nanocomposites. Nano Lett 10(9):3283–328910.1021/nl100804a ↗
36. Jimenez S, Perez JG, Tritt TM, Zhu S, Sosa-Sanchez JL, Martinez-Juarez J, Lopez O (2014) Synthesis and thermoelectric performance of a p-type Bi0.4Sb1.6Te3 material developed via mechanical alloying. Energy Convers Manage 87:868–87310.1016/j.enconman.2014.07.083 ↗
37. Jiang J, Chen LD, Yao Q, Bai SQ, Wang Q (2005) Effect of TeI4 content on the thermoelectric properties of n-type Bi-Te-Se crystals prepared by zone melting. Mater Chem Phys 92(1):39–4210.1016/j.matchemphys.2004.12.028 ↗
38. Xie WJ, Tang XF, Yan YG, Zhang QJ, Tritt TM (2009) Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys. Appl Phys Lett 94(10):10211110.1063/1.3097026 ↗
39. Qiu JH, Yan YG, Luo TT, Tang KC, Yao L, Zhang J, Zhang M, Su XL, Tan GJ, Xie HY, Kanatzidis MG, Uher C, Tang XF (2019) 3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance. Energy Environ Sci 12(10):3106–311710.1039/C9EE02044F ↗
40. Zheng Y, Zhang Q, Su XL, Xie HY, Shu SC, Chen TL, Tan GJ, Yan YG, Tang XF, Uher C, Snyder GJ (2015) Mechanically robust BiSbTe alloys with superior thermoelectric performance: a case study of stable hierarchical nanostructured thermoelectric materials. Adv Energy Mater 5(5):140139110.1002/aenm.201401391 ↗
41. Coates NE, Yee SK, McCulloch B, See KC, Majumdar A, Segalman RA, Urban JJ (2013) Effect of interfacial properties on polymer-nanocrystal thermoelectric transport. Adv Mater 25(11):1629–163310.1002/adma.201203915 ↗
42. Lu XF, Zhang WJ, Wang C, Wen TC, Wei Y (2011) One-dimensional conducting polymer nanocomposites: Synthesis, properties, and applications. Prog Polym Sci 36(5):671–71210.1016/j.progpolymsci.2010.07.010 ↗
43. Nandihalli N, Gregory DH, Mori T (2022) Energy-saving pathways for thermoelectric nanomaterial synthesis: hydrothermal/solvothermal, microwave-assisted, solution-based, and powder processing. Adv Sci 9(25):210605210.1002/advs.202106052 ↗
44. Du Y, Xu JY, Paul B, Eklund P (2018) Flexible thermoelectric materials and devices. Appl Mater Today 12:366–38810.1016/j.apmt.2018.07.004 ↗
45. He R, Schierning G, Nielsch K (2018) Thermoelectric devices: a review of devices, architectures, and contact optimization. Adv Mater Technol 3(4):170025610.1002/admt.201700256 ↗
46. Chen LG, Meng FK, Sun FR (2016) Thermodynamic analyses and optimization for thermoelectric devices: the state of the arts. Sci China Technol Sci 59(3):442–45510.1007/s11431-015-5970-5 ↗
47. Kanahashi K, Pu J, Takenobu T (2020) 2D materials for large-area flexible thermoelectric devices. Adv Energy Mater 10(11):190284210.1002/aenm.201902842 ↗
48. Zhang QH, Liao JC, Tang YS, Gu M, Ming C, Qiu PF, Bai SQ, Shi X, Uher C, Chen LD (2017) Realizing a thermoelectric conversion efficiency of 12% in bismuth telluride/skutterudite segmented modules through full-parameter optimization and energy-loss minimized integration. Energy Environ Sci 10(4):956–96310.1039/C7EE00447H ↗
49. Liu X, Shi XL, Zhang L, Liu WD, Yang YL, Chen ZG (2023) One-step post-treatment boosts thermoelectric properties of PEDOT: PSS flexible thin films. J Mater Sci Technol 132:81–8910.1016/j.jmst.2022.05.047 ↗
50. Hu B, Shi XL, Zou J, Chen ZG (2022) Thermoelectrics for medical applications: Progress, challenges, and perspectives. Chem Eng J 437:13526810.1016/j.cej.2022.135268 ↗
51. Zheng ZH, Shi XL, Ao DW, Liu WD, Li M, Kou LZ, Chen YX, Li F, Wei M, Liang GX, Fan P, Lu GQ, Chen ZG (2023) Harvesting waste heat with flexible Bi2Te3 thermoelectric thin film. Nat Sustain 6(2):180–19110.1038/s41893-022-01003-6 ↗
52. Sun C, Wang Y, McMurtrey MD, Jerred ND, Liou F, Li J (2021) Additive manufacturing for energy: A review. Appl Energy 282:11604110.1016/j.apenergy.2020.116041 ↗
53. Zhang D, Lim XJG, Li X, Saglik K, Solco SFD, Tan XY, Leow YH, Zhai W, Tan CKI, Xu JW, Suwardi A (2022) 3D-Printed porous thermoelectrics for in situ energy harvesting. ACS Energy Lett 8(1):332–33810.1021/acsenergylett.2c02425 ↗
54. Karthikeyan V, Surjadi JU, Li X, Fan R, Theja VCS, Li WJ, Lu Y, Roy VAL (2023) Three dimensional architected thermoelectric devices with high toughness and power conversion efficiency. Nat Commun 14(1):206910.1038/s41467-023-37707-2 ↗
55. Thimont Y, LeBlanc S (2019) The impact of thermoelectric leg geometries on thermal resistance and power output. J Appl Phys 126(9):09510110.1063/1.5115044 ↗
56. Chen A, Madan D, Wright PK, Evans JW (2011) Dispenser-printed planar thick-film thermoelectric energy generators. J Micromech Microeng 21(10):10400610.1088/0960-1317/21/10/104006 ↗
57. Du Y, Chen JG, Meng QF, Xu JY, Lu J, Paul BP, Eklund P (2020) Flexible thermoelectric double-layer inorganic/organic composites synthesized by additive manufacturing. Adv electron mater 6(8):200021410.1002/aelm.202000214 ↗
58. Madan D, Wang ZQ, Chen A, Wright PK, Evans JW (2013) High-performance dispenser printed MA p-type Bi0.5Sb1.5Te3 flexible thermoelectric generators for powering wireless sensor networks. ACS Appl Mater Interfaces 22:11872–1187610.1021/am403568t ↗
59. Jiao F, Di CA, Sun YM, Sheng P, Xu W, Zhu DB (2013) Inkjet-printed flexible organic thin-film thermoelectric devices based on p-and n-type poly (metal 1, 1, 2, 2-ethene tetra thiolate) s/polymer composites through ball-milling. Philos Trans Soc A 372(2013):2013000810.1098/rsta.2013.0008 ↗
60. Park KT, Choi J, Lee B, Ko Y, Jo K, Lee YM, Lim JA, Park CR, Kim H (2018) High-performance thermoelectric bracelet based on carbon nanotube ink printed directly onto a flexible cable. J Mater Chem A 6(40):19727–1973410.1039/C8TA08170K ↗
61. Juntunen T, Jussila H, Ruoho M, Liu SH, Hu GH, Albrow-Owen T, Ng LWT, Howe RCT, Hasan T, Sun ZP, Tittonen I (2018) Inkjet printed large-area flexible few-layer graphene thermoelectrics. Adv Funct Mater 28(22):180048010.1002/adfm.201800480 ↗
62. Zhang DW, Lim WYS, Duran SSF, Loh XJ, Suwardi A (2022) Additive manufacturing of thermoelectrics: emerging trends and outlook. ACS Energy Let 7(2):720–73510.1021/acsenergylett.1c02553 ↗
63. Zeng M, Zavanelli D, Chen J, Saeidi-Javash M, Du YP, LeBlanc S, Snyder GJ, Zhang YL (2022) Printing thermoelectric inks toward next-generation energy and thermal devices. Chem Soc Rev 51(2):485–51210.1039/D1CS00490E ↗
64. Mallick MM, Franke L, Rösch AG, Lemmer U (2020) Shape-versatile 3D thermoelectric generators by additive manufacturing. ACS Energy Lett 6(1):85–9110.1021/acsenergylett.0c02159 ↗
65. Hendricks T, Caillat T, Mori T (2022) Keynote review of latest advances in thermoelectric generation materials, devices, and technologies 2022. Energies 15(19):730710.3390/en15197307 ↗
66. Tofail SAM, Koumoulos EP, Bandyopadhyay A, Bose S, O’Donoghue L, Charitidis C (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21(1):22–3710.1016/j.mattod.2017.07.001 ↗
67. Frketic J, Dickens T, Ramakrishnan S (2017) Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing. Addit Manuf 14:69–86
68. Salmi M (2021) Additive manufacturing processes in medical applications. Materials 14(1):19110.3390/ma14010191 ↗
69. Ahn DG (2021) Directed energy deposition (DED) process: State of the art. Int J Pr Eng Man-GT 8(2):703–742
70. Zhao WY, Wang ZY, Zhang JP, Wang XP, Xu YT, Ding N, Peng ZC (2021) Vat photopolymerization 3D printing of advanced soft sensors and actuators: from architecture to function. Adv Mater Technol-US 6(8):200121810.1002/admt.202001218 ↗
71. Kulkarni A, Sorarù GD, Pearce JM (2020) Polymer-derived SiOC replica of material extrusion-based 3-D printed plastics. Addit Manuf 32:100988
72. Speidel A, Gargalis L, Ye JC, Matthews MJ, Spierings A, Hague R, Clare AT, Murray JW (2022) Chemical recovery of spent copper powder in laser powder bed fusion. Addit Manuf 52:102711
73. Ligon SC, Liska R, Stampfl J, Gurr M, Mulhaupt R (2017) Polymers for 3D Printing and Customized Additive Manufacturing. Chem rev 117(15):10212–1029010.1021/acs.chemrev.7b00074 ↗
74. Klippstein H, Sanchez ADD, Hassanin H, Zweiri Y, Seneviratne L (2018) Fused deposition modeling for unmanned aerial vehicles (UAVs): a review. Adv Eng Mater 20(2):170055210.1002/adem.201700552 ↗
75. Trevisan F, Calignano F, Aversa A, Marchese G, Lombardi M, Biamino S, Ugues D, Manfredi D (2018) Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications. J Appl Biomater Func 16(2):57–67
76. Singh S, Sharma VS, Sachdeva A (2016) Progress in selective laser sintering using metallic powders: a review. Mater Sci Technol 32(8):760–77210.1179/1743284715Y.0000000136 ↗
77. Li WB, Zhang C, Lan D, Ji WJ, Wang YR (2022) Solution printing of electronics and sensors: applicability and application in space. Adv Eng Mater 220017310.1002/adem.202200173 ↗
78. Su N, Zhu PF, Pan YH, Li F, Li B (2020) 3D-printing of shape-controllable thermoelectric devices with enhanced output performance. Energy 195:11689210.1016/j.energy.2019.116892 ↗
79. Du Y, Chen JG, Meng QF, Dou YC, Xu JY, Shen SZ (2020) Thermoelectric materials and devices fabricated by additive manufacturing. Vacuum 178:10938410.1016/j.vacuum.2020.109384 ↗
80. Oztan C, Welch R, LeBlanc S (2022) Additive manufacturing of bulk thermoelectric architectures: a review. Energies 15(9):312110.3390/en15093121 ↗
81. He MH, Zhao Y, Wang BA, Xi Q, Zhou J, Liang ZQ (2015) 3D printing fabrication of amorphous thermoelectric materials with ultralow thermal conductivity. Small 11(44):5889–589410.1002/smll.201502153 ↗
82. Shi JL, Chen HL, Jia SH, Wang WJ (2019) 3D printing fabrication of porous bismuth antimony telluride and study of the thermoelectric properties. J Manuf Process 37:370–37510.1016/j.jmapro.2018.11.001 ↗
83. Mao Y, Yan YJ, Wu KP, Xie HY, Xiu ZK, Yang JH, Zhang QJ, Uher C, Tang XF (2017) Non-equilibrium synthesis and characterization of n-type Bi2Te2.7Se0.3 thermoelectric material prepared by rapid laser melting and solidification. RSC Adv 7(35):21439–2144510.1039/C7RA02677C ↗
84. Yan YJ, Geng WQ, Qiu JH, Ke HQ, Luo C, Yang JH, Uher C, Tang XF (2018) Thermoelectric properties of n-type ZrNiSn prepared by rapid non-equilibrium laser processing. RSC Adv 8(28):15796–1580310.1039/C8RA00992A ↗
85. Wu KP, Yan YG, Zhang J, Mao Y, Xie HY, Yang JH, Zhang QJ, Uher C, Tang XF (2017) Preparation of n-type Bi2Te3 thermoelectric materials by non-contact dispenser printing combined with selective laser melting. Phys Status Solid-R 11(6):170006710.1002/pssr.201700067 ↗
86. Du Y, Chen JG, Liu X, Lu C, Xu JY, Paul B, Eklund P (2018) Flexible n-type tungsten carbide/polylactic acid thermoelectric composites fabricated by additive manufacturing. Coatings 8(1):2510.3390/coatings8010025 ↗
87. Yang SE, Kim F, Ejaz F, Lee GS, Ju H, Choo S, Lee J, Kim G, Jung SH, Ahn S, Chae HG, Kim KT, Kwon B, Son JS (2021) Composition-segmented BiSbTe thermoelectric generator fabricated by multimaterial 3D printing. Nano Energy 81:10563810.1016/j.nanoen.2020.105638 ↗
88. Liu Y, Zhang Y, Ortega S, Ibanez M, Lim KH, Grau-Carbonell A, Marti-Sanchez S, Ng KM, Arbiol J, Kovalenko MV, Cadavid D, Cabot A (2018) Crystallographically textured nanomaterials produced from the liquid phase sintering of BixSb2-xTe3 nanocrystal building blocks. Nano Lett 18(4):255710.1021/acs.nanolett.8b00263 ↗
89. Besganz A, Zöllmer V, Kun R, Pal E, Walder L, Busse M, Thoben KD, Busse M, Denkena B, Gausemeier J (2014) Inkjet printing as a flexible technology for the deposition of thermoelectric composite structures. Procedia Technol 15:99–10610.1016/j.protcy.2014.09.043 ↗
90. Jiao F, Di CA, Sun YM, Sheng P, Xu W, Zhu DB (2014) Inkjet-printed flexible organic thin-film thermoelectric devices based on p-and n-type poly (metal 1, 1, 2, 2-ethene tetra thiolate) s/polymer composites through ball-milling. Philos T R Soc A 372(2013):2013000810.1098/rsta.2013.0008 ↗
91. Du Y, Chen JG, Meng QF, Xu JY, Xu JY, Paul BP, Eklund P (2020) Flexible ternary carbon black/Bi2Te3 based alloy/polylactic acid thermoelectric composites fabricated by additive manufacturing. J Materiomics 6(2):293–29910.1016/j.jmat.2020.02.010 ↗
92. Revilla-León M, Özcan M (2019) Additive manufacturing technologies used for processing polymers: current status and potential application in prosthetic dentistry. J Prosthodontics 28(2):146–15810.1111/jopr.12801 ↗
93. Melchels FPW, Feijen J, Grijpma DW (2010) A review on stereolithography and its applications in biomedical engineering. Biomaterials 31(24):6121–613010.1016/j.biomaterials.2010.04.050 ↗
94. Murr LE, Martinez E, Gaytan SM, Ramirez DA, Machado BI, Shindo PW, Martinez JL, Medina F, Wooten J, Ciscel D, Ackelid U, Wicker RB (2011) Microstructural architecture, microstructures, and mechanical properties for a nickel-base superalloy fabricated by electron beam melting. Metall Mater Trans A 42(11):3491–350810.1007/s11661-011-0748-2 ↗
95. Welch R, Hobbis D, Birnbaum AJ, Nolas G, LeBlanc S (2021) Nano-and micro-structures formed during laser processing of selenium doped bismuth telluride. Adv Mater Interfaces 8(15):210018510.1002/admi.202100185 ↗
96. Takaichi A, Suyalatu, Nakamoto T, Joko N, Nomura N, Tsutsumi Y, Migita S, Doi H, Kurosu S, Chiba A, Wakabayashi N, Igarashi Y, Hanawa T (2013) Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 21:67–7610.1016/j.jmbbm.2013.01.021 ↗
97. Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL (2015) Review of selective laser melting: Materials and applications. Appl Phys Rev 2(4):04110110.1063/1.4935926 ↗
98. Shirazi SFS, Gharehkhani S, Mehrali M, Yarmand H, Metselaar HSC, Kadri NA, Abu-Osman NA (2015) A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mater 16(3):03350210.1088/1468-6996/16/3/033502 ↗
99. Sutton AT, Kriewall CS, Leu MC, Newkirk JW (2017) Powder characterization techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual Phys Prototy 12(1):3–2910.1080/17452759.2016.1250605 ↗
100. Lamm ME, Wang L, Kishore V (2020) (2020) Material extrusion additive manufacturing of wood and lignocellulosic-filled composites. Polymers 12(9):2115. https://doi.org/10.3390/polym1209211510.3390/polym12092115 ↗