Review: additive manufacturing of fiber-reinforced composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Zhou L, Miller J, Vezza J et al (2024) Additive manufacturing: a comprehensive review. Sensors 24:266810.3390/s24092668 ↗
2. Ivanova O, Williams C, Campbell T (2013) Additive manufacturing (AM) and nanotechnology: promises and challenges. Rapid Prototyp J 19:353–36410.1108/RPJ-12-2011-0127 ↗
3. Tyagi B, Dubey D, Sahai A et al (2023) Mechanical properties evaluation of FFF-printed ABS samples based on different process parameters combined with ANOVA and regression analysis. Proc Inst Mech Eng Part C J Mech Eng Sci 237:4256–4270. https://doi.org/10.1177/0954406223115154010.1177/09544062231151540 ↗
4. Parandoush P, Lin D (2017) A review on additive manufacturing of polymer-fiber composites. Compos Struct 182:36–5310.1016/j.compstruct.2017.08.088 ↗
5. Prabhakar MM, Saravanan AK, Lenin AH et al (2021) A short review on 3D printing methods, process parameters and materials. Mater Today Proc 45:6108–611410.1016/j.matpr.2020.10.225 ↗
6. Pérez M, Carou D, Rubio EM et al (2020) Current advances in additive manufacturing. Procedia CIRP 88:439–44410.1016/j.procir.2020.05.076 ↗
7. Sharma H, Kumar A, Rana S et al (2023) Critical review on advancements on the fiber-reinforced composites: role of fiber/matrix modification on the performance of the fibrous composites. J Mater Res Technol 26:2975–300210.1016/j.jmrt.2023.08.036 ↗
8. Khatkar V, Olhan S, Dubey D et al (2024) Damping and wear behavior of 3D woven reinforced structural composites for automotive leaf spring applications. Mech Compos Mater 60:295–306. https://doi.org/10.1007/s11029-024-10199-x10.1007/s11029-024-10199-x ↗
9. Singh O, Behera B (2024) Structural improvement of 3D woven honeycomb composite liner for enhanced energy absorption and impact performance in aircrew helmet. J Compos Mater 58:1619–1640. https://doi.org/10.1177/0021998324124605810.1177/00219983241246058 ↗
10. Agnihotri S, Sheikh JN, Singh SP et al (2024) Flame-retardant textile structural composites for construction application: a review. J Mater Sci 59:1788–1818. https://doi.org/10.1007/s10853-023-09312-710.1007/s10853-023-09312-7 ↗
11. Yang G, Park M, Park S-J (2019) Recent progresses of fabrication and characterization of fibers-reinforced composites: a review. Compos Commun 14:34–4210.1016/j.coco.2019.05.004 ↗
12. Kumar A, Sain T (2024) Phase field-based cohesive zone approach to model delamination in fiber-reinforced polymer composites. Compos Struct 329:11775110.1016/j.compstruct.2023.117751 ↗
13. Olhan S, Khatkar V, Behera BK (2023) Novel high-performance textile fibre-reinforced aluminum matrix structural composites fabricated by FSP. Mater Sci Eng B 289:11626510.1016/j.mseb.2023.116265 ↗
14. Olhan S, Antil B, Behera BK (2024) Synergistic effect of different high-performance fibers on the microstructural evolution and mechanical performance of novel hybrid metal matrix composites produced via friction stir processing for automotive applications. Proc Inst Mech Eng Part B J Eng Manuf. https://doi.org/10.1177/0954405424122946910.1177/09544054241229469 ↗
15. Olhan S, Khatkar V, Behera BK (2019) Mechanical behavior of natural fiber Based 3D woven structural composites for automotive applications. 45 Text Res 65:120
16. Composites and their properties-Google Books [cited 2022 Jul 18]. https://books.google.co.in/books?hl=en&lr=&id=0AOaDwAAQBAJ&oi=fnd&pg=PA411&ots=JxYggVGA9B&sig=YvWAIJxm-VxoznJheufQKFW8XfM&redir_esc=y#v=onepage&q&f=false
17. Amateau MF (1998) Ceramic Composites. Handb Compos [cited 2022 Jul 18] p 307–332. https://link.springer.com/chapter/https://doi.org/10.1007/978-1-4615-6389-1_1510.1007/978-1-4615-6389-1_15 ↗
18. Fidan I, Imeri A, Gupta A et al (2019) The trends and challenges of fiber reinforced additive manufacturing. Int J Adv Manuf Technol 102:1801–1818. https://doi.org/10.1007/s00170-018-03269-710.1007/s00170-018-03269-7 ↗
19. Camburn B, Ismail E, Perez KB, et al (2019) Additive manufacture of fibre-reinforced structures: design process and principles. Vol 4 24th Des Manuf Life Cycle Conf 13th Int Conf Micro-Nanosyst American Society of Mechanical Engineers, California, USA/106992510.1115/DETC2019-97398 ↗
20. Chen Y, Rios CO, Imeri A et al (2020) Investigation of the tensile properties in fibre-reinforced additive manufacturing and fused filament fabrication. Int J Rapid Manuf 9:25110.1504/IJRAPIDM.2020.107734 ↗
21. Plocher J, Wioland J-B, Panesar AS (2022) Additive manufacturing with fibre-reinforcement – design guidelines and investigation into the influence of infill patterns. Rapid Prototyp J 28:1241–1259. https://doi.org/10.1108/RPJ-09-2021-022310.1108/RPJ-09-2021-0223 ↗
22. Wong J, Altassan A, Rosen DW (2023) Additive manufacturing of fiber-reinforced polymer composites: a technical review and status of design methodologies. Compos Part B Eng 255:11060310.1016/j.compositesb.2023.110603 ↗
23. Quan Z, Wu A, Keefe M et al (2015) Additive manufacturing of multi-directional preforms for composites: opportunities and challenges. Mater Today 18:503–51210.1016/j.mattod.2015.05.001 ↗
24. Rajeshirke M, Alkunte S, Huseynov O et al (2023) Fatigue analysis of additively manufactured short carbon fiber-reinforced PETG Components. Int J Adv Manuf Technol 128:2377–2394. https://doi.org/10.1007/s00170-023-12107-410.1007/s00170-023-12107-4 ↗
25. Junk S, Rothe N (2022) Lightweight design of automotive components using generative design with fiber-reinforced additive manufacturing. Procedia CIRP 109:119–12410.1016/j.procir.2022.05.224 ↗
26. Ahmed W, Alnajjar F, Zaneldin E et al (2020) Implementing FDM 3D printing strategies using natural fibers to produce biomass composite. Mater (Basel) 13:406510.3390/ma13184065 ↗
27. Unterweger C, Brüggemann O, Fürst C (2014) Synthetic fibers and thermoplastic short-fiber-reinforced polymers: properties and characterization. Polym Compos 35:227–236. https://doi.org/10.1002/pc.2265410.1002/pc.22654 ↗
28. Continuous carbon fiber-high strength 3D printing material [cited 2023 Jan 16]. https://markforged.com/materials/continuous-fibers/continuous-carbon-fiber
29. Ivey M, Melenka GW, Carey JP et al (2017) 2017 Characterizing short-fiber-reinforced composites produced using additive manufacturing. Adv Manuf Polym Compos Sci. https://doi.org/10.1080/20550340134112510.1080/205503401341125 ↗
30. Sun B, Mubarak S, Zhang G et al (2023) Fused-deposition modeling 3D printing of short-cut carbon-fiber-reinforced PA6 composites for strengthening, toughening, and light weighting. Polym (Basel) 15:372210.3390/polym15183722 ↗
31. Abderrafai Y, Hadi Mahdavi M, Sosa-Rey F et al (2022) Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: formulation, manufacturing and characterization. Mater Des 214:11035810.1016/j.matdes.2021.110358 ↗
32. Fan C, Shan Z, Zou G et al (2020) Performance of short fiber interlayered reinforcement thermoplastic resin in additive manufacturing. Mater (Basel) 13:286810.3390/ma13122868 ↗
33. Mkh R, Benal MGM, G. S. PK, et al (2022) Influence of short glass fibre reinforcement on mechanical properties of 3D printed ABS-based polymer composites. Polym (Basel) 14:118210.3390/polym14061182 ↗
34. Yu H, Potter KD, Wisnom MR (2014) A novel manufacturing method for aligned discontinuous fibre composites (high performance-discontinuous fibre method). Compos Part A Appl Sci Manuf 65:175–18510.1016/j.compositesa.2014.06.005 ↗
35. Hamerton I, HiPerDiF, University of Bristol, UK. https://www.bristol.ac.uk/composites/research/hiperdif/
36. Longana ML, Yu H, Hamerton I et al (2017) High performance discontinuous fibre (HiPerDiF) technology. Una via sostenibile per una nuova generazione di materiali compositi 46:22–27
37. Huntley SJ, Rendall T, Longana ML, et al. Modelling of the HiPerDiF method for manufacturing recycled composites using smoothed particle hydrodynamics. 2019 [cited 2024 May 28]; https://research-information.bris.ac.uk/en/publications/modelling-of-the-hiperdif-method-for-manufacturing-recycled-compo
38. Hecker MD, Longana ML, Eloi J-C et al (2023) Recycling end-of-life sails by carbon fibre reclamation and composite remanufacture using the HiPerDiF fibre alignment technology. Compos Part A Appl Sci Manuf 173:10765110.1016/j.compositesa.2023.107651 ↗
39. Lobov E, Vindokurov I, Tashkinov M (2024) Mechanical properties and performance of 3D-printed acrylonitrile butadiene styrene reinforced with carbon glass and basalt short fibers. Polym (Basel) 16:110610.3390/polym16081106 ↗
40. Le T-H, Le V-S, Dang Q-K et al (2021) Microstructure evaluation and thermal-mechanical properties of ABS matrix composite filament reinforced with multi-walled carbon nanotubes by a single screw extruder for FDM 3D printing. Appl Sci 11:879810.3390/app11198798 ↗
41. Wang Li, Rao et al (2019) Flexure behaviors of ABS-based composites containing carbon and kevlar fibers by material extrusion 3D printing. Polym (Basel) 11:187810.3390/polym11111878 ↗
42. Wang P, Zou B, Ding S et al (2020) Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing. Compos Part B Eng 198:10817510.1016/j.compositesb.2020.108175 ↗
43. Sano Y, Matsuzaki R, Ueda M et al (2018) 3D printing of discontinuous and continuous fibre composites using stereolithography. Addit Manuf 24:521–527
44. Dong W, Ma H, Liu R et al (2021) Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties. Ceram Int 47:24121–2412910.1016/j.ceramint.2021.05.123 ↗
45. Zhang S, Li M, Hao N et al (2019) Stereolithography 3D printing of lignin-reinforced composites with enhanced mechanical properties. ACS Omega 4:20197–20204. https://doi.org/10.1021/acsomega.9b0245510.1021/acsomega.9b02455 ↗
46. Nagarajan B, Mertiny P, Qureshi AJ (2020) Magnetically loaded polymer composites using stereolithography—material processing and characterization. Mater Today Commun 25:10152010.1016/j.mtcomm.2020.101520 ↗
47. Sakly A, Kenzari S, Bonina D et al (2014) A novel quasicrystal-resin composite for stereolithography. Mater Des 56:280–28510.1016/j.matdes.2013.11.025 ↗
48. Kumar M, Ghosh S, Kumar V et al (2022) Tribo-mechanical and biological characterization of PEGDA/bioceramics composites fabricated using stereolithography. J Manuf Process 77:301–31210.1016/j.jmapro.2022.03.024 ↗
49. Scordo G, Bertana V, Scaltrito L et al (2019) A novel highly electrically conductive composite resin for stereolithography. Mater Today Commun 19:12–1710.1016/j.mtcomm.2018.12.017 ↗
50. Zhang S, Bhagia S, Li M et al (2021) Wood-reinforced composites by stereolithography with the stress whitening behavior. Mater Des 206:10977310.1016/j.matdes.2021.109773 ↗
51. Shinde VV, Celestine A-D, Beckingham LE et al (2020) Stereolithography 3D printing of microcapsule catalyst-based self-healing composites. ACS Appl Polym Mater 2:5048–5057. https://doi.org/10.1021/acsapm.0c0087210.1021/acsapm.0c00872 ↗
52. Ronca A, Ambrosio L, Grijpma DW (2013) Preparation of designed poly(d, l-lactide)/nanosized hydroxyapatite composite structures by stereolithography. Acta Biomater 9:5989–599610.1016/j.actbio.2012.12.004 ↗
53. Bustillos J, Montero-Zambrano D, Loganathan A et al (2019) Stereolithography-based 3D printed photosensitive polymer/boron nitride nanoplatelets composites. Polym Compos 40:379–38810.1002/pc.24662 ↗
54. Guillaume O, Geven MA, Sprecher CM et al (2017) Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair. Acta Biomater 54:386–39810.1016/j.actbio.2017.03.006 ↗
55. Chiulan I, Voicu ŞI, Batalu D (2022) The use of graphene and its derivatives for the development of polymer matrix composites by stereolithographic 3D printing. Appl Sci 12:352110.3390/app12073521 ↗
56. Jiang Y, Plog J, Yarin AL et al (2020) Direct ink writing of surface-modified flax elastomer composites. Compos Part B Eng 194:10806110.1016/j.compositesb.2020.108061 ↗
57. Guo Y, Liu Y, Liu J et al (2020) Shape memory epoxy composites with high mechanical performance manufactured by multi-material direct ink writing. Compos Part A Appl Sci Manuf 135:10590310.1016/j.compositesa.2020.105903 ↗
58. Li Y-Y, Li L-T, Li B (2015) Direct ink writing of 3–3 piezoelectric composite. J Alloys Compd 620:125–12810.1016/j.jallcom.2014.09.124 ↗
59. Cheng M, Ramasubramanian A, Rasul MG et al (2021) Direct ink writing of polymer composite electrolytes with enhanced thermal conductivities. Adv Funct Mater. https://doi.org/10.1002/adfm.20200668310.1002/adfm.202006683 ↗
60. Xu C, An C, He Y et al (2018) Direct ink writing of DNTF based composite with high performance. Propellants, Explos Pyrotech 43:754–758. https://doi.org/10.1002/prep.20180007510.1002/prep.201800075 ↗
61. Fernandez F, Compel WS, Lewicki JP et al (2019) Optimal design of fiber reinforced composite structures and their direct ink write fabrication. Comput Method Appl Mech Eng 353:277–30710.1016/j.cma.2019.05.010 ↗
62. Yang G, Sun Y, Limin qin et al (2021) Direct-ink-writing (DIW) 3D printing functional composite materials based on supra-molecular interaction. Compos Sci Technol 215:10901310.1016/j.compscitech.2021.109013 ↗
63. Restrepo JJ, Colorado HA (2020) Additive manufacturing of composites made of epoxy resin with magnetite particles fabricated with the direct ink writing technique. J Compos Mater 54:647–657. https://doi.org/10.1177/002199831986501910.1177/0021998319865019 ↗
64. Liu J, Guo Y, Weng C et al (2020) High thermal conductive epoxy based composites fabricated by multi-material direct ink writing. Compos Part A Appl Sci Manuf 129:10568410.1016/j.compositesa.2019.105684 ↗
65. Nawafleh N, Elibol FKE, Aljaghtham M et al (2020) Static and dynamic mechanical performance of short Kevlar fiber reinforced composites fabricated via direct ink writing. J Mater Sci 55:11284–11295. https://doi.org/10.1007/s10853-020-04826-w10.1007/s10853-020-04826-w ↗
66. Nesaei S, Rock M, Wang Y et al (2017) Additive manufacturing with conductive, viscoelastic polymer composites: direct-ink-writing of electrolytic and anodic poly(ethylene oxide) composites. J Manuf Sci Eng. https://doi.org/10.1115/1.403723810.1115/1.4037238 ↗
67. Chen H, Zhu W, Tang H et al (2021) Oriented structure of short fiber reinforced polymer composites processed by selective laser sintering: the role of powder-spreading process. Int J Mach Tools Manuf 163:10370310.1016/j.ijmachtools.2021.103703 ↗
68. Yuan S, Zheng Y, Chua CK et al (2018) Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering. Compos Part A Appl Sci Manuf 105:203–21310.1016/j.compositesa.2017.11.007 ↗
69. Tang H, Chen H, Sun Q et al (2021) Experimental and computational analysis of structure-property relationship in carbon fiber reinforced polymer composites fabricated by selective laser sintering. Compos Part B Eng 204:10849910.1016/j.compositesb.2020.108499 ↗
70. Lupone F, Padovano E, Ostrovskaya O et al (2021) Innovative approach to the development of conductive hybrid composites for selective laser sintering. Compos Part A Appl Sci Manuf 147:10642910.1016/j.compositesa.2021.106429 ↗
71. Yan C, Hao L, Xu L et al (2011) Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering. Compos Sci Technol 71:1834–184110.1016/j.compscitech.2011.08.013 ↗
72. Zhang Y, Hao L, Savalani MM et al (2009) In vitro biocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering. J Biomed Mater Res Part A 91A:1018–1027. https://doi.org/10.1002/jbm.a.3229810.1002/jbm.a.32298 ↗
73. Singamneni S, Velu R, Behera MP et al (2019) Selective laser sintering responses of keratin-based bio-polymer composites. Mater Des 183:10808710.1016/j.matdes.2019.108087 ↗
74. Zhang Y, Fang J, Li J et al (2017) The effect of carbon nanotubes on the mechanical properties of wood plastic composites by selective laser sintering. Polym (Basel) 9:72810.3390/polym9120728 ↗
75. Zhu W, Yan C, Shi Y et al (2016) A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites. Sci Rep 6:3378010.1038/srep33780 ↗
76. Berti G, D’Angelo L, Gatto A et al (2010) Mechanical characterisation of PA-Al 2 O 3 composites obtained by selective laser sintering. Rapid Prototyp J 16:124–129. https://doi.org/10.1108/13552541011025843/full/html10.1108/13552541011025843/full/html ↗
77. Jain PK, Pandey PM, Rao PVM (2010) Selective laser sintering of clay-reinforced polyamide. Polym Compos 31:732–743. https://doi.org/10.1002/pc.2085410.1002/pc.20854 ↗
78. Hao L, Savalani MM, Zhang Y et al (2006) Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development. Proc Inst Mech Eng Part H J Eng Med 220:521–531. https://doi.org/10.1243/09544119JEIM6710.1243/09544119JEIM67 ↗
79. Yan M, Tian X, Peng G et al (2018) High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering. Compos Sci Technol 165:140–14710.1016/j.compscitech.2018.06.023 ↗
80. Chacón JM, Caminero MA, Núñez PJ et al (2019) Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: effect of process parameters on mechanical properties. Compos Sci Technol 181:10768810.1016/j.compscitech.2019.107688 ↗
81. Eichenhofer M, Wong JCH, Ermanni P (2017) Continuous lattice fabrication of ultra-lightweight composite structures. Addit Manuf 18:48–57
82. Caminero MA, Chacón JM, García-Moreno I et al (2018) Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Compos Part B Eng 148:93–10310.1016/j.compositesb.2018.04.054 ↗
83. Wang Y, Kong D, Zhang Q et al (2021) Process parameters and mechanical properties of continuous glass fiber reinforced composites-polylactic acid by fused deposition modeling. J Reinf Plast Compos 40:686–698. https://doi.org/10.1177/073168442199801710.1177/0731684421998017 ↗
84. Akhoundi B, Nabipour M, Hajami F et al (2020) Calculating filament feed in the fused deposition modeling process to correctly print continuous fiber composites in curved paths. Mater (Basel) 13:448010.3390/ma13204480 ↗
85. Liu Z, Wang Y, Shi J (2019) Tensile performance of fused deposition modeling PA 6 polymer composites with nanoparticle reinforcement and/or continuous fiber reinforcement. J Micro Nano-Manuf. https://doi.org/10.1115/1404491310.1115/14044913 ↗
86. Maqsood N, Rimašauskas M (2021) Characterization of carbon fiber reinforced PLA composites manufactured by fused deposition modeling. Compos Part C Open Access 4:10011210.1016/j.jcomc.2021.100112 ↗
87. Caminero MA, Chacón JM, García-Moreno I et al (2018) Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Polym Test 68:415–42310.1016/j.polymertesting.2018.04.038 ↗
88. Dubey D, Singh SP, Behera BK (2023) Investigating the influence of fiber orientation on tensile and flexural properties of additively manufactured continuous glass fiber-reinforced nylon composites. Adv Manuf Technol XXXVI. https://doi.org/10.3233/ATDE23092910.3233/ATDE230929 ↗
89. Dong G, Tang Y, Li D et al (2018) Mechanical properties of continuous kevlar fiber reinforced composites fabricated by fused deposition modeling process. Procedia Manuf 26:774–78110.1016/j.promfg.2018.07.090 ↗
90. Milenkovic S, Slavkovic V, Fragassa C et al (2021) Effect of the raster orientation on strength of the continuous fiber reinforced PVDF/PLA composites, fabricated by hand-layup and fused deposition modeling. Compos Struct 270:11406310.1016/j.compstruct.2021.114063 ↗
91. Pertuz AD, Díaz-Cardona S, González-Estrada OA (2020) Static and fatigue behaviour of continuous fibre reinforced thermoplastic composites manufactured by fused deposition modelling technique. Int J Fatigue 130:10527510.1016/j.ijfatigue.2019.105275 ↗
92. Lu Y, Han XX, Gleadall A et al (2022) Fracture toughness of three-dimensional stereolithography printed polymer reinforced with continuous carbon fibers. 3D Print Addit Manuf 9:278–287. https://doi.org/10.1089/3dp.2020.031010.1089/3dp.2020.0310 ↗
93. Mahshid R, Isfahani MN, Heidari-Rarani M et al (2023) Recent advances in development of additively manufactured thermosets and fiber reinforced thermosetting composites: technologies, materials, and mechanical properties. Compos Part A Appl Sci Manuf 171:10758410.1016/j.compositesa.2023.107584 ↗
94. Zhang Z, Liu R, Li W et al (2021) Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption. Addit Manuf 47:102348
95. Abdullah AM, Ding Y, He X et al (2023) Direct-write 3D printing of UV-curable composites with continuous carbon fiber. J Compos Mater 57:851–863. https://doi.org/10.1177/0021998322112718210.1177/00219983221127182 ↗
96. He X, Ding Y, Lei Z et al (2021) 3D printing of continuous fiber-reinforced thermoset composites. Addit Manuf 40:101921
97. Baur JW, Abbott AC, Barnett PR et al (2023) Mechanical properties of additively printed, UV cured, continuous fiber unidirectional composites for multifunctional applications. J Compos Mater 57:865–882. https://doi.org/10.1177/0021998322114626410.1177/00219983221146264 ↗
98. Mostafaei A, Heidarzadeh A, Brabazon D (2021) Production of metal matrix composites via additive manufacturing. Encycl Mater Compos 2:605–61410.1177/00219983221146264 ↗
99. Tang S, Ummethala R, Suryanarayana C et al (2021) Additive manufacturing of aluminum-based metal matrix composites—a review. Adv Eng Mater. https://doi.org/10.1002/adem.20210005310.1002/adem.202100053 ↗
100. Saboori A, Chen X, Badini C et al (2019) Reactive spontaneous infiltration of Al-activated TiO2 by molten aluminum. Trans Nonferr Met Soc China 29:657–66610.1016/S1003-6326(19)64976-9 ↗