Anisotropic mechanical properties of extrusion-based 3D printed layered concrete
Source abstract
Abstract
Extrusion-based 3D printed concrete is a promising material and processing technique for use in the construction industry. In this study, 3D printed specimens were loaded dynamically and statically to investigate their anisotropic characteristics. The experimental results showed that the average static compressive strength of the 3D printed concrete specimens was 115% of that of the cast specimens. Meanwhile, the dynamic compressive strength of DX specimens was significantly larger than that of other 3D printed specimens and cast specimens under the same impact pressure. In particular, ultrasonic pulse velocity values were used to quantitatively represent the anisotropy of 3D printed specimens. In conclusion, the anisotropic characteristics of 3D printed concrete were studied. The results indicate that the performance of 3D printed concrete was best (especially in the X-direction). The results provide a reference for engineers looking to design 3D printed components for use in construction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Additive Manufacturing and 3D Printing Technologies · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Bos F, Wolfs R, Ahmed Z, Salet T (2016) Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual Phys Prototyp 11(3):209–22510.1080/17452759.2016.1209867 ↗
2. Buswell RA, de Silva WRL, Jones SZ, Dirrenberger J (2018) 3D printing using concrete extrusion: a roadmap for research. Cem Concr Res 112:37–4910.1016/j.cemconres.2018.05.006 ↗
3. Chaves Figueiredo S, Romero Rodríguez C, Ahmed ZY, Bos DH, Xu Y, Salet TM et al (2019) An approach to develop printable strain hardening cementitious composites. Mater Design. 169:107651. https://doi.org/10.1016/j.matdes.2019.10765110.1016/j.matdes.2019.107651 ↗
4. Clarke AJ (2019) Fine-grained metals from 3D printing. Nature 576(7785):41–4210.1038/d41586-019-03701-2 ↗
5. Visser CW, Pohl R, Sun C, Roemer GW, in ’t Veld BH, Lohse D, (2015) Toward 3D printing of pure metals by laser-induced forward transfer. Adv Mater. 27(27):4087–409210.1002/adma.201501058 ↗
6. Lin YP, Zhang Y, Yu MF (2019) Parallel process 3D metal microprinting. Adv Mater Technol 4(1):1800393. https://doi.org/10.1002/admt.20180039310.1002/admt.201800393 ↗
7. Li S, Duan WY, Zhao T, Han WJ, Wang L, Dou R et al (2018) The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology. J Eur Ceram Soc 38(14):4597–460310.1016/j.jeurceramsoc.2018.06.046 ↗
8. Hwa LC, Rajoo S, Noor AM, Ahmad N, Uday MB (2017) Recent advances in 3D printing of porous ceramics: a review. Curr Opin Solid State Mat Sci 21(6):323–34710.1016/j.cossms.2017.08.002 ↗
9. de Leon A, Chen QY, Palaganas NB, Palaganas JO, Manapat J, Advincula RC (2016) High performance polymer nanocomposites for additive manufacturing applications. React Funct Polym 103:141–15510.1016/j.reactfunctpolym.2016.04.010 ↗
10. Laronda MM, Rutz AL, Xiao S, Whelan KA, Duncan FE, Roth EW et al (2017) A bioprosthetic ovary created using 3D printing microporous scaffolds restores ovarian function in sterilized mice. Nat Commun 8:15261. https://doi.org/10.1038/ncomms1526110.1038/ncomms15261 ↗
11. Ligon SC, Liska R, Stampfl J, Gurr M, Mulhaupt R (2017) Polymers for 3D printing and customized additive manufacturing. Chem Rev 117(15):10212–1029010.1021/acs.chemrev.7b00074 ↗
12. Pham L, Tran P, Sanjayan J (2020) Steel fibres reinforced 3D printing concrete: Influence of fibre sizes on mechanical performance. Constr Build Mater. 250:118785. https://doi.org/10.1016/j.conbuildmat.2020.11878510.1016/j.conbuildmat.2020.118785 ↗
13. Arunothayan AR, Nematollahi B, Ranade R, Bong SH, Sanjayan J (2020) Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction. Constr Build Mater. 257:119546. https://doi.org/10.1016/j.conbuildmat.2020.11954610.1016/j.conbuildmat.2020.119546 ↗
14. Casagrande L, Esposito L, Menna C, Asprone D, Auricchio F (2020) Effect of testing procedures on buildability properties of 3D-printable concrete. Constr Build Mater. 245:118286. https://doi.org/10.1016/j.conbuildmat.2020.11828610.1016/j.conbuildmat.2020.118286 ↗
15. Chen M, Li L, Zheng Y, Zhao P, Lu L, Cheng X (2018) Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials. Constr Build Mater 189:601–61110.1016/j.conbuildmat.2018.09.037 ↗
16. De Schutter G, Lesage K, Mechtcherine V, Nerella VN, Habert G, Agusti-Juan I (2018) Vision of 3D printing with concrete-technical, economic and environmental potentials. Cem Concr Res 112:25–3610.1016/j.cemconres.2018.06.001 ↗
17. Wangler T, Roussel N, Bos FP, Salet TAM, Flatt RJ (2019) Digital concrete: a review. Cem Concr Res 123:105780. https://doi.org/10.1016/j.cemconres.2019.10578010.1016/j.cemconres.2019.105780 ↗
18. Labonnote N, Ronnquist A, Manum B, Ruther P (2016) Additive construction: state-of-the-art, challenges and opportunities. Autom Constr 72:347–36610.1016/j.autcon.2016.08.026 ↗
19. Le TT, Austin SA, Lim S, Buswell RA, Law R, Gibb AGF et al (2012) Hardened properties of high-performance printing concrete. Cem Concr Res 42(3):558–56610.1016/j.cemconres.2011.12.003 ↗
20. Lu B, Weng YW, Li MY, Qian Y, Leong KF, Tan MJ et al (2019) A systematical review of 3D printable cementitious materials. Constr Build Mater 207:477–49010.1016/j.conbuildmat.2019.02.144 ↗
21. Wolfs RJM, Bos FP, Salet TAM (2019) Hardened properties of 3D printing concrete: the influence of process parameters on interlayer adhesion. Cem Concr Res 119:132–14010.1016/j.cemconres.2019.02.017 ↗
22. Zhang C, Hou ZY, Chen C, Zhang YM, Mechtcherine V, Sun ZM (2019) Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content. Cem Concr Compos 104:103406. https://doi.org/10.1016/j.cemconcomp.2019.10340610.1016/j.cemconcomp.2019.103406 ↗
23. Panda B, Noor Mohamed NA, Paul SC, Bhagath Singh G, Tan MJ, Savija B (2019) The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printing concrete. Materials 12(13):2149. https://doi.org/10.3390/ma1213214910.3390/ma12132149 ↗
24. Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Pt B-Eng 143:172–19610.1016/j.compositesb.2018.02.012 ↗
25. Ma G, Li Z, Wang L, Wang F, Sanjayan J (2019) Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing. Constr Build Mater 202:770–78310.1016/j.conbuildmat.2019.01.008 ↗
26. Zhang Y, Zhang Y, She W, Yang L, Liu G, Yang Y (2019) Rheological and harden properties of the high-thixotropy 3D printing concrete. Constr Build Mater 201:278–28510.1016/j.conbuildmat.2018.12.061 ↗
27. Paul SC, Tay YWD, Panda B, Tan MJ (2018) Fresh and hardened properties of 3D printable cementitious materials for building and construction. Arch Civ Mech Eng 18(1):311–31910.1016/j.acme.2017.02.008 ↗
28. Ding T, Xiao J, Zou S, Wang Y (2020) Hardened properties of layered 3D printing concrete with recycled sand. Cem Concr Compos. 113:103724. https://doi.org/10.1016/j.cemconcomp.2020.10372410.1016/j.cemconcomp.2020.103724 ↗
29. Ji GC, Ding T, Xiao JZ, Du SP, Li J, Duan ZH (2019) A 3D printing ready-mixed concrete power distribution substation: materials and construction technology. Materials 12(9):1540. https://doi.org/10.3390/ma1209154010.3390/ma12091540 ↗
30. Yeon J, Kang JL, Yan W (2018) Spall damage repair using 3D printing technology. Autom Constr 89:266–27410.1016/j.autcon.2018.02.003 ↗
31. Asprone D, Auricchio F, Menna C, Mercuri V (2018) 3D printing of reinforced concrete elements: technology and design approach. Constr Build Mater 165:218–23110.1016/j.conbuildmat.2018.01.018 ↗
32. Zhang Y, Zhang YS, She W, Yang L, Lin GJ, Yang YG (2019) Rheological and harden properties of the high-thixotropy 3D printing concrete. Constr Build Mater 201:278–28510.1016/j.conbuildmat.2018.12.061 ↗
33. Pham GN, Lee S-H, Kwon O-H, Kwon K-R (2018) Anti-3D weapon model detection for safe 3D printing based on convolutional neural networks and D2 shape distribution. Symmetry-Basel 10(4):90. https://doi.org/10.3390/sym1004009010.3390/sym10040090 ↗
34. Walther G (2015) Printing insecurity? the security implications of 3D-printing of weapons. Sci Eng Ethics 21(6):1435–144510.1007/s11948-014-9617-x ↗
35. Tan G, Nasir MZM, Ambrosi A, Pumera M (2017) 3D Printing electrodes for detection of nitroaromatic explosives and nerve agents. Anal Chem 89(17):8995–900110.1021/acs.analchem.7b01614 ↗
36. Diggs-McGee BN, Kreiger EL, Kreiger MA, Case MP (2019) Print time vs. elapsed time: A temporal analysis of a continuous printing operation for additive constructed concrete. Addit Manuf. 28:205–214
37. Zareiyan B, Khoshnevis B (2017) Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete. Autom Constr 83:212–22110.1016/j.autcon.2017.08.019 ↗
38. Fan LF, Wang LJ, Wu ZJ (2018) Wave transmission across linearly jointed complex rock masses. Int J Rock Mech Min Sci 112:193–20010.1016/j.ijrmms.2018.09.004 ↗
39. Zhu JY, Kee SH, Han D, Tsai YT (2011) Effects of air voids on ultrasonic wave propagation in early age cement pastes. Cem Concr Res 41(8):872–88110.1016/j.cemconres.2011.04.005 ↗
40. Jia P, Li L, Liu DQ, Wang XS, Wang DC (2020) Insight into rock crack propagation from resistivity and ultrasonic wave variation. Theor Appl Fract Mech. 109:102758. https://doi.org/10.1016/j.tafmec.2020.10275810.1016/j.tafmec.2020.102758 ↗
41. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc Sect B 62(11):676-700. https://doi.org/10.1088/0370-1301/62/11/30210.1088/0370-1301/62/11/302 ↗
42. Zhu J, Hu SS, Wang LL (2009) An analysis of stress uniformity for concrete-like specimens during SHPB tests. Int J Impact Eng 36(1):61–7210.1016/j.ijimpeng.2008.04.007 ↗
43. Gong FQ, Si XF, Li XB, Wang SY (2019) Dynamic triaxial compression tests on sandstone at high strain rates and low confining pressures with split Hopkinson pressure bar. Int J Rock Mech Min Sci 113:211–21910.1016/j.ijrmms.2018.12.005 ↗
44. Hou JF, Guo ZP, Liu WZ, Zhang YX (2020) Mechanical properties and meso-structure response of cemented gangue-fly ash backfill with cracks under seepage- stress coupling. Constr Build Mater. 250:118863. https://doi.org/10.1016/j.conbuildmat.2020.11886310.1016/j.conbuildmat.2020.118863 ↗
45. Chen SJ, Du ZW, Zhang Z, Zhang HW, Xia ZG, Feng F (2020) Effects of chloride on the early mechanical properties and microstructure of gangue-cemented paste backfill. Constr Build Mater. 235:117504. https://doi.org/10.1016/j.conbuildmat.2019.11750410.1016/j.conbuildmat.2019.117504 ↗
46. Jiang ZL, Easa SM, Hu CB, Zheng XY (2020) Evaluation of new aspect of styrene-butadiene-styrene modified bitumens: damping property and mechanism. Constr Build Mater 242:118185. https://doi.org/10.1016/j.conbuildmat.2020.11818510.1016/j.conbuildmat.2020.118185 ↗
47. Asprone D, Menna C, Bos FP, Salet TAM, Mata-Falcon J, Kaufmann W (2018) Rethinking reinforcement for digital fabrication with concrete. Cem Concr Res 112:111–12110.1016/j.cemconres.2018.05.020 ↗
48. Panda B, Paul SC, Tan MJ (2017) Anisotropic mechanical performance of 3D printing fiber reinforced sustainable construction material. Mater Lett 209:146–14910.1016/j.matlet.2017.07.123 ↗