Thermally conductive polymer nanocomposites for filament-based additive manufacturing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Thermal properties of materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Guo N, Leu MC (2013) Additive manufacturing: technology, applications, and research needs. Front Mech Eng 8(3):215–24310.1007/s11465-013-0248-8 ↗
2. Pathmanathan K, Johari G (1993) The effect of increased crystallization on the electrical properties of nylon-12. J Polym Sci, Part B: Polym Phys 31(3):265–27110.1002/polb.1993.090310304 ↗
3. Chunze Y, Yusheng S, Jinsong Y, Jinhui L (2009) A nanosilica/nylon-12 composite powder for selective laser sintering. J Reinf Plast Compos 28(23):2889–290210.1177/0731684408094062 ↗
4. Zhang G, Xia Y, Wang H, Tao Y, Tao G, Tu S, Wu H (2010) A percolation model of thermal conductivity for filled polymer composites. J Compos Mater 44(8):963–97010.1177/0021998309349690 ↗
5. Han Z, Fina A (2011) Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci 36(7):914–94410.1016/j.progpolymsci.2010.11.004 ↗
6. Lao S, Koo JH, Moon TJ, Londa M, Ibeh C, Wissler G, Pilato L (2011) Flame-retardant polyamide 11 nanocomposites: further thermal and flammability studies. J Fire Sci 29(6):479–49810.1177/0734904111404658 ↗
7. Chen H, Ginzburg VV, Yang J, Yang Y, Liu W, Huang Y, Du L, Chen B (2016) Thermal conductivity of polymer-based composites: Fundamentals and applications. Prog Polym Sci 59:41–8510.1016/j.progpolymsci.2016.03.001 ↗
8. Ji H, Sellan DP, Pettes MT, Kong X, Ji J, Shi L, Ruoff RS (2014) Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage. Energy Environ Sci 7(3):1185–119210.1039/C3EE42573H ↗
9. Ling Z, Zhang Z, Shi G, Fang X, Wang L, Gao X, Fang Y, Xu T, Wang S, Liu X (2014) Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules. Renew Sustain Energy Rev 31:427–43810.1016/j.rser.2013.12.017 ↗
10. Khan WS, Asmatulu R, Rodriguez V, Ceylan M (2014) Enhancing thermal and ionic conductivities of electrospun PAN and PMMA nanofibers by graphene nanoflake additions for battery-separator applications. Int J Energy Res 38(15):2044–205110.1002/er.3188 ↗
11. Idumah CI, Hassan A (2016) Recently emerging trends in thermal conductivity of polymer nanocomposites. Rev Chem Eng 32(4):413–45710.1515/revce-2016-0004 ↗
12. Jang D, Park S-J, Yook S-J, Lee K-S (2014) The orientation effect for cylindrical heat sinks with application to LED light bulbs. Int J Heat Mass Transf 71:496–50210.1016/j.ijheatmasstransfer.2013.12.037 ↗
13. Burger N, Laachachi A, Ferriol M, Lutz M, Toniazzo V, Ruch D (2016) Review of thermal conductivity in composites: mechanisms, parameters and theory. Prog Polym Sci 61:1–2810.1016/j.progpolymsci.2016.05.001 ↗
14. Zhang P, Li Q, Xuan Y (2014) Thermal contact resistance of epoxy composites incorporated with nano-copper particles and the multi-walled carbon nanotubes. Compos A Appl Sci Manuf 57:1–710.1016/j.compositesa.2013.10.022 ↗
15. bin Mohd Yusoff AR, Kim D, Kim HP, Shneider FK, da Silva WJ, Jang J (2015) A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%. Energy Environ Sci 8(1):303–31610.1039/C4EE03048F ↗
16. Royne A, Dey CJ, Mills DR (2005) Cooling of photovoltaic cells under concentrated illumination: a critical review. Sol Energy Mater Sol Cells 86(4):451–48310.1016/j.solmat.2004.09.003 ↗
17. Kline DE (1961) Thermal conductivity studies of polymers. J Polym Sci 50(154):441–450. https://doi.org/10.1002/pol.1961.120501541310.1002/pol.1961.1205015413 ↗
18. Jylhä L, Sihvola A (2007) Equation for the effective permittivity of particle-filled composites for material design applications. J Phys D Appl Phys 40(16):4966–497310.1088/0022-3727/40/16/032 ↗
19. Haggenmueller R, Guthy C, Lukes JR, Fischer JE, Winey KI (2007) Single wall carbon nanotube/polyethylene nanocomposites: thermal and electrical conductivity. Macromolecules 40(7):2417–242110.1021/ma0615046 ↗
20. Deng S, Lin Z, Xu B, Lin H, Du C (2015) Effects of carbon fillers on crystallization properties and thermal conductivity of poly (phenylene sulfide). Polym-Plast Technol Eng 54(10):1017–102410.1080/03602559.2014.986802 ↗
21. Ramesh C (1999) Crystalline transitions in nylon 12. Macromolecules 32(17):5704–570610.1021/ma990494o ↗
22. Gan D, Lu S, Wang Z (2001) Synthesis and characterization of poly (ether ketone ketone)(PEKK)/sodium sulfonated poly (arylene ether ketone)(S-PAEK) block copolymers. Polym Int 50(7):812–81610.1002/pi.700 ↗
23. Wang J, Liu Z (2013) Ionic liquids as green reaction media for synthesis of poly (aryl ether ketone) s. Chin Sci Bull 58(11):1262–126610.1007/s11434-013-5741-2 ↗
24. Gan D, Cao W, Song C, Wang Z (2001) Mechanical properties and morphologies of poly (ether ketone ketone)/glass fibers/mica ternary composites. Mater Lett 51(2):120–12410.1016/S0167-577X(01)00276-2 ↗
25. Fiedler L, Garcia Correa L, Radusch H, Wutzler A, Gerken J (2007) Evaluation of polyproplene powder grades in consideration of the laser sintering processibility. Zeitschrift Kunststofftechnik, Bd 3:1–14
26. Yan W, Lin S, Kafka OL, Lian Y, Yu C, Liu Z, Yan J, Wolff S, Wu H, Ndip-Agbor E (2018) Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing. Comput Mech 61(5):521–54110.1007/s00466-018-1539-z ↗
27. Yeong W, Sudarmadji N, Yu H, Chua C, Leong K, Venkatraman S, Boey Y, Tan L (2010) Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering. Acta Biomater 6(6):2028–203410.1016/j.actbio.2009.12.033 ↗
28. Mazzanti V, Mollica F (2019) Rheological behavior of wood flour filled poly (lactic acid): temperature and concentration dependence. Polym Compos 40(S1):E169–E17610.1002/pc.24559 ↗
29. Auras RA, Lim L-T, Selke SE, Tsuji H (2011) Poly (lactic acid): synthesis, structures, properties, processing, and applications, vol 10. Wiley
30. Gkartzou E, Koumoulos EP, Charitidis CA (2017) Production and 3D printing processing of bio-based thermoplastic filament. Manuf Rev 4:1
31. Hsu Sh, Yen HJ, Tseng CS, Cheng CS, Tsai CL (2007) Evaluation of the growth of chondrocytes and osteoblasts seeded into precision scaffolds fabricated by fused deposition manufacturing. J Biomed Mater Res Part B: Appl Biomater Off J Soc Biomater Jpn Soc Biomater Aust Soc Biomater Korean Soc Biomater 80(2):519–52710.1002/jbm.b.30626 ↗
32. Mazzanti V, Pariante R, Bonanno A, de Ballesteros OR, Mollica F, Filippone G (2019) Reinforcing mechanisms of natural fibers in green composites: role of fibers morphology in a PLA/hemp model system. Compos Sci Technol 180:51–5910.1016/j.compscitech.2019.05.015 ↗
33. Ochi S (2008) Mechanical properties of kenaf fibers and kenaf/PLA composites. Mech Mater 40(4–5):446–45210.1016/j.mechmat.2007.10.006 ↗
34. Oksman K, Skrifvars M, Selin J-F (2003) Natural fibres as reinforcement in polylactic acid (PLA) composites. Compos Sci Technol 63(9):1317–132410.1016/S0266-3538(03)00103-9 ↗
35. Le Troedec M, Sedan D, Peyratout C, Bonnet JP, Smith A, Guinebretiere R, Gloaguen V, Krausz P (2008) Influence of various chemical treatments on the composition and structure of hemp fibres. Compos A Appl Sci Manuf 39(3):514–52210.1016/j.compositesa.2007.12.001 ↗
36. Ayrilmis N, Kariz M, Kwon JH, Kuzman MK (2019) Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials. Int J Adv Manuf Technol 102(5–8):2195–220010.1007/s00170-019-03299-9 ↗
37. Tao Y, Wang H, Li Z, Li P, Shi SQ (2017) Development and application of wood flour-filled polylactic acid composite filament for 3D printing. Materials 10(4):33910.3390/ma10040339 ↗
38. Zhao DX, Cai X, Shou GZ, Gu YQ, Wang PX (2016) Study on the preparation of bamboo plastic composite intend for additive manufacturing. Key engineering materials. Trans Tech Publ, pp 250–258
39. Tran TN, Bayer IS, Heredia-Guerrero JA, Frugone M, Lagomarsino M, Maggio F, Athanassiou A (2017) Cocoa shell waste biofilaments for 3d printing applications. Macromol Mater Eng 302(11):1700219–170022910.1002/mame.201700219 ↗
40. Vaidya AA, Collet C, Gaugler M, Lloyd-Jones G (2019) Integrating softwood biorefinery lignin into polyhydroxybutyrate composites and application in 3D printing. Mater Today Commun 19:286–29610.1016/j.mtcomm.2019.02.008 ↗
41. Le Duigou A, Castro M, Bevan R, Martin N (2016) 3D printing of wood fibre biocomposites: from mechanical to actuation functionality. Mater Des 96:106–11410.1016/j.matdes.2016.02.018 ↗
42. Pop MA, Croitoru C, Bedő T, Geamă47393n V, Radomir I, Cosnită M, Zaharia SM, Chicos LA, Milosan I (2019) Structural changes during 3D printing of bioderived and synthetic thermoplastic materials. J Appl Polym Sci 136(17):47382–4739310.1002/app.47382 ↗
43. Šafka J, Ackermann M, Bobek J, Seidl M, Habr J, Bĕhálek L (2016) Use of composite materials for FDM 3D print technology. Materials science forum. Trans Tech Publ, pp 174–181
44. Nguyen NA, Bowland CC, Naskar AK (2018) A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites. Appl Mater Today 12:138–15210.1016/j.apmt.2018.03.009 ↗
45. Kuo C-C, Liu L-C, Teng W-F, Chang H-Y, Chien F-M, Liao S-J, Kuo W-F, Chen C-M (2016) Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications. Compos B Eng 86:36–3910.1016/j.compositesb.2015.10.005 ↗
46. Girdis J, Gaudion L, Proust G, Löschke S, Dong A (2017) Rethinking timber: investigation into the use of waste macadamia nut shells for additive manufacturing. JOM 69(3):575–57910.1007/s11837-016-2213-6 ↗
47. Osman MA, Atia MR (2018) Investigation of ABS-rice straw composite feedstock filament for FDM. Rapid Prototyp J 24(6):1067–107510.1108/RPJ-11-2017-0242 ↗
48. Mohan N, Senthil P, Vinodh S, Jayanth N (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual Phys Prototyp 12(1):47–5910.1080/17452759.2016.1274490 ↗
49. Plummer K, Vasquez M, Majewski C, Hopkinson N (2012) Study into the recyclability of a thermoplastic polyurethane powder for use in laser sintering. Proc Inst Mech Eng Part B J Eng Manuf 226(7):1127–113510.1177/0954405412440066 ↗
50. Gorna K, Gogolewski S (2003) Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes. J Biomed Mater Res Part A Off J Soc Biomater The Jpn Soc Biomater Aust Soc Biomater Korean Soc Biomater 67(3):813–827
51. Guo H, Wang Q, Liu J, Du C, Li B (2019) Improved interfacial properties for largely enhanced thermal conductivity of poly (vinylidene fluoride)-based nanocomposites via functionalized multiwall carbon nanotubes. Appl Surf Sci 487:379–38810.1016/j.apsusc.2019.05.070 ↗
52. Guo Y, Yang X, Ruan K, Kong J, Dong M, Zhang J, Gu J, Guo Z (2019) Reduced graphene oxide heterostructured silver nanoparticles significantly enhanced thermal conductivities in hot-pressed electrospun polyimide nanocomposites. ACS Appl Mater Interfaces 11(28):25465–2547310.1021/acsami.9b10161 ↗
53. Zhuang Y, Cao X, Zhang J, Ma Y, Shang X, Lu J, Yang S, Zheng K, Ma Y (2019) Monomer casting nylon/graphene nanocomposite with both improved thermal conductivity and mechanical performance. Compos A Appl Sci Manuf 120:49–5510.1016/j.compositesa.2019.02.019 ↗
54. You J, Choi H-H, Lee YM, Cho J, Park M, Lee S-S, Park JH (2019) Plasma-assisted mechanochemistry to produce polyamide/boron nitride nanocomposites with high thermal conductivities and mechanical properties. Compos B Eng 164:710–71910.1016/j.compositesb.2019.01.100 ↗
55. Guo Y, Ruan K, Yang X, Ma T, Kong J, Wu N, Zhang J, Gu J, Guo Z (2019) Constructing fully carbon-based fillers with a hierarchical structure to fabricate highly thermally conductive polyimide nanocomposites. J Mater Chem C 7(23):7035–704410.1039/C9TC01804B ↗
56. Chen J, Huang X, Sun B, Jiang P (2018) Highly thermally conductive yet electrically insulating polymer/boron nitride nanosheets nanocomposite films for improved thermal management capability. ACS Nano 13(1):337–34510.1021/acsnano.8b06290 ↗
57. Lule Z, Kim J (2019) Surface modification of aluminum nitride to fabricate thermally conductive poly (butylene succinate) nanocomposite. Polymers 11(1):14810.3390/polym11010148 ↗
58. Shen C, Wang H, Zhang T, Zeng Y (2019) Silica coating onto graphene for improving thermal conductivity and electrical insulation of graphene/polydimethylsiloxane nanocomposites. J Mater Sci Technol 35(1):36–4310.1016/j.jmst.2018.09.016 ↗
59. Tong J, Huang H-X, Wu M (2018) Simultaneously facilitating dispersion and thermal reduction of graphene oxide to enhance thermal conductivity of poly (vinylidene fluoride)/graphene nanocomposites by water in continuous extrusion. Chem Eng J 348:693–70310.1016/j.cej.2018.04.199 ↗
60. Wang R, Wu L, Zhuo D, Zhang J, Zheng Y (2018) Fabrication of polyamide 6 nanocomposite with improved thermal conductivity and mechanical properties via incorporation of low graphene content. Ind Eng Chem Res 57(32):10967–1097610.1021/acs.iecr.8b01070 ↗
61. Li C, Liu B, Gao Z, Wang H, Liu M, Wang S, Xiong C (2018) Electrically insulating ZnOs/ZnOw/silicone rubber nanocomposites with enhanced thermal conductivity and mechanical properties. J Appl Polym Sci 135(27):4645410.1002/app.46454 ↗
62. Lin H, Pei L, Zhang L (2018) Enhanced thermal conductivity of PLA-based nanocomposites by incorporation of graphite nanoplatelets functionalized by tannic acid. J Appl Polym Sci 135(26):4639710.1002/app.46397 ↗
63. Zhang X, Tan C, Ma Y, Wang F, Yang W (2018) BaTiO3@ carbon/silicon carbide/poly (vinylidene fluoride-hexafluoropropylene) three-component nanocomposites with high dielectric constant and high thermal conductivity. Compos Sci Technol 162:180–18710.1016/j.compscitech.2018.05.001 ↗
64. Guiney LM, Mansukhani ND, Jakus AE, Wallace SG, Shah RN, Hersam MC (2018) Three-dimensional printing of cytocompatible, thermally conductive hexagonal boron nitride nanocomposites. Nano Lett 18(6):3488–349310.1021/acs.nanolett.8b00555 ↗
65. Guo Y, Xu G, Yang X, Ruan K, Ma T, Zhang Q, Gu J, Wu Y, Liu H, Guo Z (2018) Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology. J Mater Chem C 6(12):3004–301510.1039/C8TC00452H ↗
66. Shi Y, Ma W, Wu L, Hu D, Mo J, Yang B, Zhang S, Zhang Z (2019) Magnetically aligning multilayer graphene to enhance thermal conductivity of silicone rubber composites. J Appl Polym Sci 136(37):47951–4795910.1002/app.47951 ↗
67. Cao M, Du C, Guo H, Li X, Song S, Tezel FH, Li B (2018) Paving thermally conductive highway by 3D interconnected framework of carbon nanotube and graphene oxide in poly (vinylidene fluoride). Compos A Appl Sci Manuf 115:331–34010.1016/j.compositesa.2018.09.024 ↗
68. Kim G-H, Lee D, Shanker A, Shao L, Kwon MS, Gidley D, Kim J, Pipe KP (2015) High thermal conductivity in amorphous polymer blends by engineered interchain interactions. Nat Mater 14(3):295–30010.1038/nmat4141 ↗
69. Lule Z, Kim J (2019) Thermally conductive and highly rigid polylactic acid (PLA) hybrid composite filled with surface treated alumina/nano-sized aluminum nitride. Compos Part A Appl Sci Manuf 124:105506–10551410.1016/j.compositesa.2019.105506 ↗
70. Yang D, Kong X, Ni Y, Gao D, Yang B, Zhu Y, Zhang L (2019) Novel nitrile-butadiene rubber composites with enhanced thermal conductivity and high dielectric constant. Compos Part A Appl Sci Manuf 124:105447–10545610.1016/j.compositesa.2019.05.015 ↗
71. Yuan Y, Li Z, Cao L, Tang B, Zhang S (2019) Modification of Si3N4 ceramic powders and fabrication of Si3N4/PTFE composite substrate with high thermal conductivity. Ceram Int 45(13):16569–1657610.1016/j.ceramint.2019.05.194 ↗
72. Huang J, Yang W, Zhu J, Fu L, Li D, Zhou L (2019) Silver nanoparticles decorated 3D reduced graphene oxides as hybrid filler for enhancing thermal conductivity of polystyrene composites. Compos A Appl Sci Manuf 123:79–8510.1016/j.compositesa.2019.05.002 ↗
73. Xu D, Gersappe D (2009). Thermal Conductivity of Polymer Nanocomposites. In: APS March Meeting Abstracts, vol. 2014, pp 499–52610.1201/9781420009804-21 ↗
74. Xie B-H, Huang X, Zhang G-J (2013) High thermal conductive polyvinyl alcohol composites with hexagonal boron nitride microplatelets as fillers. Compos Sci Technol 85:98–10310.1016/j.compscitech.2013.06.010 ↗
75. Zhou T, Wang X, Cheng P, Wang T, Xiong D, Wang X (2013) Improving the thermal conductivity of epoxy resin by the addition of a mixture of graphite nanoplatelets and silicon carbide microparticles. Express Polym Lett 7(7):585–59410.3144/expresspolymlett.2013.56 ↗
76. Mamunya YP, Davydenko V, Pissis P, Lebedev E (2002) Electrical and thermal conductivity of polymers filled with metal powders. Eur Polym J 38(9):1887–189710.1016/S0014-3057(02)00064-2 ↗
77. Shi SQ, Gardner DJ (2006) Hygroscopic thickness swelling rate of compression molded wood fiberboard and wood fiber/polymer composites. Compos A Appl Sci Manuf 37(9):1276–128510.1016/j.compositesa.2005.08.015 ↗
78. Krupa I, Cecen V, Boudenne A, Prokeš J, Novák I (2013) The mechanical and adhesive properties of electrically and thermally conductive polymeric composites based on high density polyethylene filled with nickel powder. Mater Des 51:620–62810.1016/j.matdes.2013.03.067 ↗
79. Rusu M, Sofian N, Rusu D (2001) Mechanical and thermal properties of zinc powder filled high density polyethylene composites. Polym Test 20(4):409–41710.1016/S0142-9418(00)00051-9 ↗
80. Luyt A, Molefi J, Krump H (2006) Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene composites. Polym Degrad Stab 91(7):1629–163610.1016/j.polymdegradstab.2005.09.014 ↗
81. Hong J, Lee J, Hong C, Shim S (2010) Improvement of thermal conductivity of poly (dimethyl siloxane) using silica-coated multi-walled carbon nanotube. J Therm Anal Calorim 101(1):297–30210.1007/s10973-009-0664-5 ↗
82. Wang S, Cheng Y, Wang R, Sun J, Gao L (2014) Highly thermal conductive copper nanowire composites with ultralow loading: toward applications as thermal interface materials. ACS Appl Mater Interfaces 6(9):6481–648610.1021/am500009p ↗
83. Bjorneklett A, Halbo L, Kristiansen H (1992) Thermal conductivity of epoxy adhesives filled with silver particles. Int J Adhes Adhes 12(2):99–10410.1016/0143-7496(92)90030-Y ↗
84. Zhou W, Wang C, Ai T, Wu K, Zhao F, Gu H (2009) A novel fiber-reinforced polyethylene composite with added silicon nitride particles for enhanced thermal conductivity. Compos A Appl Sci Manuf 40(6–7):830–83610.1016/j.compositesa.2009.04.005 ↗
85. Harada M, Hamaura N, Ochi M, Agari Y (2013) Thermal conductivity of liquid crystalline epoxy/BN filler composites having ordered network structure. Compos B Eng 55:306–31310.1016/j.compositesb.2013.06.031 ↗
86. Gaveau DL, Salim MA, Hergoualc’h K, Locatelli B, Sloan S, Wooster M, Marlier ME, Molidena E, Yaen H, DeFries R (2014) Major atmospheric emissions from peat fires in Southeast Asia during non-drought years: evidence from the 2013 Sumatran fires. Sci Rep 4:6112–611910.1038/srep06112 ↗
87. Yu Y, Wu L, Zhi J (2014) Diamond nanowires: fabrication, structure, properties, and applications. Angew Chem Int Ed 53(52):14326–1435110.1002/anie.201310803 ↗
88. Zhou T, Wang X, Mingyuan G, Liu X (2008) Study of the thermal conduction mechanism of nano-SiC/DGEBA/EMI-2, 4 composites. Polymer 49(21):4666–467210.1016/j.polymer.2008.08.023 ↗
89. Lee W, Han I, Yu J, Kim S, Lee T (2004) Thermal characterization of thermally conductive underfill for a flip-chip package using novel temperature sensing technique. In: Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004)(IEEE Cat. No. 04EX971), IEEE, pp 47–5210.1109/EPTC.2004.1396575 ↗
90. Wang X-f, Wang R-c, Peng C-q, Li T-t, Bing L (2010) Synthesis and sintering of beryllium oxide nanoparticles. Prog Nat Sci Mater Int 20:81–8610.1016/S1002-0071(12)60011-2 ↗
91. Akishin G, Turnaev S, Vaispapir VY, Gorbunova M, Makurin YN, Kiiko V, Ivanovskii A (2009) Thermal conductivity of beryllium oxide ceramic. Refract Ind Ceram 50(6):465–46810.1007/s11148-010-9239-z ↗
92. Singh V, Joung D, Zhai L, Das S, Khondaker SI, Seal S (2011) Graphene based materials: past, present and future. Prog Mater Sci 56(8):1178–127110.1016/j.pmatsci.2011.03.003 ↗
93. Zheng Q, Li Z, Yang J, Kim J-K (2014) Graphene oxide-based transparent conductive films. Prog Mater Sci 64:200–24710.1016/j.pmatsci.2014.03.004 ↗
94. Casimir D, Ahmed I, Garcia-Sanchez R, Misra P, Diaz F (2017) Raman Spectroscopy of Graphitic Nanomaterials. In: Raman Spectroscopy, IntechOpen10.5772/intechopen.72769 ↗
95. Pradere C, Sauder C (2008) Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K). Carbon 46(14):1874–188410.1016/j.carbon.2008.07.035 ↗
96. Shaina P, George L, Yadav V, Jaiswal M (2016) Estimating the thermal expansion coefficient of graphene: the role of graphene–substrate interactions. J Phys Condens Matter 28(8):08530110.1088/0953-8984/28/8/085301 ↗
97. Singh IV, Tanaka M, Endo M (2007) Effect of interface on the thermal conductivity of carbon nanotube composites. Int J Therm Sci 46(9):842–84710.1016/j.ijthermalsci.2006.11.003 ↗
98. Ma S, Li Y, Li Y, Luo Y (2016) Research on structures, mechanical properties, and mechanical responses of TKX-50 and TKX-50 based PBX with molecular dynamics. J Mol Model 22(2):4310.1007/s00894-016-2913-4 ↗
99. Wolff S, Wang M-J (2018) Carbon black reinforcement of elastomers. In: Carbon Black. Routledge, pp 289–35510.1201/9781315138763-9 ↗
100. MInus M, Kumar S (2005) The processing, properties, and structure of carbon fibers. Jom 57(2):52–5810.1007/s11837-005-0217-8 ↗