Structures, properties and applications of the polyurethane ionomers
Source abstract
Abstract
On the basis of the reports from 2010 to 2018, the chemical structure, production methods and applications of polyurethane ionomers were reviewed. The paper presents ionogenic reagents and counterions responsible for the incorporation of anionic and cationic groups into polyurethane chains and the resulting physicochemical properties of these polymers. The most important applications of synthesized ionomers as a waterborne polyurethane, elastomer materials, biomaterials and materials for special applications (electronics, nanocomposites) were presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · Carbon dioxide utilization in catalysis · Environmental Engineering and Cultural Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Król P (2007) Synthesis methods, chemical structures and phase structures of linear polyurethanes. Properties and applications of linear polyurethanes in polyurethane elastomers, copolymers and ionomers. Prog Mater Sci 52:915–101510.1016/j.pmatsci.2006.11.001 ↗
2. Jaudouin O, Robin J-J, Lopez-Cuesta PD, Imbert C (2012) Ionomer-based polyurethanes: a comparative study of properties and applications. Polym Int 61:495–51010.1002/pi.4156 ↗
3. Wang SW, Colby RH (2018) Linear viscoelasticity and cation conduction in polyurethane sulfonate ionomers with ion in the soft segment-single phase systems. Macromolecules 51:2757–276610.1021/acs.macromol.7b02509 ↗
4. Bullermann J, Spohnholz R, Friebe S, Tunga ST (2014) Synthesis and characterization of polyurethane ionomers with trimellitic anhydride and dimethylol propionic acid for waterborne self-emulsifying dispersions. J Appl Polym Sci 52:680–69010.1002/pola.27049 ↗
5. Zhou X, Fang C, Chen J, Li S, Li Y, Lei W (2016) Correlation of raw materials and waterborne polyurethane properties by sequence similarity analysis. J Mater Sci Technol 32:687–69410.1016/j.jmst.2016.02.006 ↗
6. Daemi H, Barikani M, Barmar M (2014) A simple approach for morphology tailoring of alginate particles by manipulation ionic nature of polyurethanes. Int J Biol Macromol 66:212–22010.1016/j.ijbiomac.2014.02.029 ↗
7. Deka R, Bora MM, Upadhyaya M, Dilip Kumar Kakati DK (2015) Conductive composites from polyaniline and polyurethane sulphonate anionomer. J Appl Polym Sci 132:4160010.1002/app.41600 ↗
8. Francolini I, D’Ilario L, Guaglianone E, Donelli G, Martinelli A, Piozzi A (2010) Polyurethane anionomers containing metal ions with antimicrobial properties: thermal, mechanical and biological characterization. Acta Biomater 6:3482–349010.1016/j.actbio.2010.03.042 ↗
9. Dieterich D, Keberle W, Witth H (1970) Polyurethane ionomers, a new class of block polymers. Angew Chem Int Ed Eng 9:40–5010.1002/anie.197000401 ↗
10. Neumaier HH (1974) Aqueous dispersions of polyurethane ionomers for coating and laminating. J Coat Fabr 3:181–19310.1177/152808377400300304 ↗
11. Lelah MD, Pierce JA, Lambrecht LK, Cooper SL (1985) Polyether–urethane ionomers: surface property/ex vivo blood compatibility relationships. J Colloid Interface Sci 104:422–43910.1016/0021-9797(85)90051-7 ↗
12. Tai NL, Adhikari R, Shanks R, Hakkey P, Adhikari B (2018) Flexible starch-polyurethane films: effect mixed macrodiol polyurethane ionomers on physicochemical characteristics and hydrophobicity. Carbohydr Polym 197:312–33510.1016/j.carbpol.2018.06.019 ↗
13. Kim HJ, Han J, Son Y (2017) Mechanical properties, thermal stability, and glass transition behaviors of a waterborne polyurethane/graphene oxide nanocomposite. Mater Trans 58:892–89710.2320/matertrans.M2016411 ↗
14. Senevirathna SR, Amarasinghe S, Karunaratne V, Koneswaran M, Laleen K (2017) The effect of change of ionomer/polyol molar ratio on dispersion stability and crystalline structure of films produced from hydrophilic polyurethanes. J Appl Polym Sci 134:4447510.1002/app.44475 ↗
15. Montaz M, Barikani M, Razawi-Nouri M (2015) Effect of ionic group content on thermal and structural properties of polycaprolactone-based shape memory polyurethane ionomers. Iran Polym 24:505–51310.1007/s13726-015-0341-4 ↗
16. Xu CL, ZengJ-B WY-Z (2014) Sustainable waterborne polyurethane ionomer reinforced poly(vinyl alcohol) composite films. Compos Sci Technol 96:109–11510.1016/j.compscitech.2014.03.018 ↗
17. Shao Q-H, Chen J, Hu J-Q, Wang F, Tu W-P (2014) Synthesis, characterization and release properties of DCOIT nanocapsules encapsulated by block ionomers. J Funct Mater 45:06020–06024
18. Wang Z, Hou Z, Wang Y (2013) Fluorinated waterborne shape memory polyurethane urea for potential implant application. J Appl Polym Sci 127:710–71610.1002/app.37862 ↗
19. Zhu H-J, Hu J-Q, Tu W-P, Wang F (2012) Synthesis and characterization of PEG-IPDI-DMPA block ionomers and their solution behavior in water phase. J Funct Mater 42(5):942–946
20. Król P, Pielichowska K, Byczyński Ł (2010) Thermal degradation kinetics of polyurethane–siloxane anionomers. Thermochim Acta 507:91–9810.1016/j.tca.2010.05.005 ↗
21. Byczyński Ł, Król P (2013) Synthesis, thermal and performance properties of poly(urethane-dimethylsiloxane) anionomers. Part I. Structural studies. Polim (Pol) 58:188–19310.14314/polimery.2013.188 ↗
22. Hu X, Zhang X, Liub J, Daia J (2014) Synthesis, characterization and fluorescence performance of a waterborne polyurethane-based fluorescent dye 4-amino-N-cyclohexyl-1,8-naphthalimide, WPU-ACN. Polym Int 63:453–45810.1002/pi.4523 ↗
23. Chashmejahanbina MR, Daemib H, Barikanib M, Salimia A (2014) Noteworthy impacts of polyurethane-urea ionomers as the efficient polar coatings on adhesion strength of plasma treated polypropylene. Appl Surf Sci 317:688–69510.1016/j.apsusc.2014.08.094 ↗
24. Zhao W, Zhang G, Jiang L, Lua T, Huang X, Shen J (2011) Novel polyurethane ionomer nanoparticles displayed a good biosensor effection. Coll Surf B Biointerfaces 88:78–8410.1016/j.colsurfb.2011.06.011 ↗
25. Rafiemanzelat F, Adli V, Mallakpour S (2015) Effective preparation of clay/waterborne azo-containing polyurethane nanocomposite dispersions incorporated anionic groups in the chain termini. Des Monomer Polym 18:303–31410.1080/15685551.2014.999459 ↗
26. Cakić SM, Spírková M, Risti IS, B-Simendi JK, Cincović M, Poręba R (2013) The waterborne polyurethane dispersions based on polycarbonate diol: effect of ionic content. Mater Chem Phys 138:277–28510.1016/j.matchemphys.2012.11.057 ↗
27. Wang S-W, Liu W, Colby RH (2011) Counterion dynamics in polyurethane-carboxylate ionomers with ionic liquid counterions. Chem Mater 23:1862–187310.1021/cm103548t ↗
28. Bahadur A, Schoaib M, Saeed A, Iqbal S (2016) FT-IR spectroscopic and thermal study of waterborne polyurethane-acrylate leather coating using tartaric acid as an ionomer. e-Polymers 16:463–47410.1515/epoly-2016-0154 ↗
29. Filip D, Asandulesa M, Macocinschi D, Aflori M, Vlad S (2016) Molecular dynamics, conductivity and morphology of sodium deoxycholate-based poly(ester ether)urethane ionomer biomaterials. J Mater Sci 51:8516–852810.1007/s10853-016-0113-3 ↗
30. Filip D, Macocinschi D, Paslaru E, Tuchilus CG, Vlad S (2016) Surface characterization and antimicrobial properties of sodium deoxycholate-based poly(ester ether) urethane ionomer biomaterials. React Funct Polym 102:70–8110.1016/j.reactfunctpolym.2016.02.011 ↗
31. Nair PA, Ramesh P (2012) Synthesis and characterization of calcium-containing polyurethane using calcium lactate as a chain extender. Polym J 44:1009–101410.1038/pj.2012.51 ↗
32. He L, Sun D (2013) Synthesis of high-solid content sulfonate-type polyurethane dispersion by pellet process. J Appl Polym Sci 127:2823–283110.1002/app.37618 ↗
33. Gao R, Zhang M, Dixit N, Moore RB, Long TE (2012) Influence of ionic charge placement on performance of poly(ethylene glycol)-based sulfonated polyurethanes. Polymer 53:1203–121110.1016/j.polymer.2012.01.043 ↗
34. Bottino A, Capannelli G, Comite A, Costa C (2011) Synthesis and characterisation of polyurethane proton exchange membranes. J Fuel Cell Sci Technol 8(5):05101110.1115/1.4003981 ↗
35. Banerjee S, Mishra A, Singh MM, Maili B, Ray B, Maili P (2011) Highly efficient polyurethane ionomer corrosion inhibitor: the effect of chain structure. RSC Adv 1:199–21010.1039/c1ra00021g ↗
36. Nakayama Y, Inaba T, Toda Y, Tanaka R, Cai Z, Shiono T, Shirahama H, Tsutsumi C (2013) Synthesis and properties of cationic ionomers from poly(ester-urethane)s based on polylactide. J Polym Sci, Part A: Polym Chem 51:4423–442810.1002/pola.26857 ↗
37. Król B, Król P (2009) Synthesis and characterisation of coating polyurethane cationomers containing quaternary ammonium alkyl groups derived from built-in alkyl bromides. Colloid Polym Sci 287:189–20110.1007/s00396-008-1966-z ↗
38. Daemi H, Rad RR, Barikani M, Adib M (2013) Catalytic activity of aqueous cationic polyurethane dispersions: a novel feature of polyurethanes. Appl Catal A Gen 468:10–1710.1016/j.apcata.2013.08.023 ↗
39. Król B, Król P (2010) Coatings materials obtained from polyurethane cationomers modified with functionalized silsequioxanes. Polim (Pol) 55:440–45110.14314/polimery.2010.440 ↗
40. Król P, Król B, Pielichowska K, Pikus S (2011) Comparison of phase structures and surface free energy values for the coating synthesised from linear polyurethanes and from waterborne polyurethane cationomers. Colloid Polym Sci 289:1757–1176710.1007/s00396-011-2515-8 ↗
41. Król P, Król B (2012) Waterborne cationomer polyurethane coatings with improved hydrophobicity. Colloid Polym Sci 290:879–89310.1007/s00396-012-2598-x ↗
42. Pielichowska K, Król P, Król B, Pagacz J (2012) TOPEM DSC study of glass transition region of polyurethane cationomers. Thermochim Acta 545:187–19310.1016/j.tca.2012.06.029 ↗
43. Król P, Król B (2012) Waterborne polyurethane cationomers synthesised from 4,4′-methylene(bis phenyl isocyanate) or isophorone isocyanate, polyesters and N-methyl or N-butyldiethanolamine—analysis the structure and selected properties of the obtained coatings. Polim (Pol) 57:799–81110.14314/polimery.2012.799 ↗
44. Król P, Król B, Lechowicz J (2014) Modelling the surface free energy parameters of polyurethane coats—part 2. Waterborne coats obtained from cationomer polyurethanes. Colloid Polym Sci 292:1051–105910.1007/s00396-013-3156-x ↗
45. Król P, Król B, Pielichowska ŠM (2014) Composites prepared from the waterborne polyurethane cationomers-modified graphene. Part I. Synthesis, structure, and physicochemical properties. Colloid Polym Sci 293:421–43110.1007/s00396-014-3417-3 ↗
46. Król P, Król B, Zenker M, Subocz J (2015) Composites prepared from the waterborne polyurethane cationomers-modified graphene. Part II. Electrical properties of the polyurethane films. Colloid Polym Sci 293:2941–294710.1007/s00396-015-3697-2 ↗
47. Król B, Pielichowska K, Król P, Chmielarz P (2017) Polyurethane cationomers modified by polysiloxane. Polym Adv Technol 28:1366–137410.1002/pat.4013 ↗
48. Król B, Pielichowska K, Król P, Kędzierski M (2019) Polyurethane cationomer films as ecological membranes for building industry. Prog Org Coat 130:83–9210.1016/j.porgcoat.2019.01.045 ↗
49. Gurunathan T, Rao CRK, Narayan R, Raju KVSN (2013) Synthesis, characterization and corrosion evaluation on new cationomeric polyurethane water dispersions and their polyaniline composites. Prog Org Coat 76:639–64710.1016/j.porgcoat.2012.12.009 ↗
50. Gao R, Zhang M, WangS-W MR, Colby RH, Long TE (2013) Polyurethanes containing an imidazolium diol-based ionic-liquid chain extender for incorporation of ionic-liquid electrolytes. Macromol Chem Phys 214:1027–103610.1002/macp.201200688 ↗
51. Ramesh S, Radhakrishnan G (1996) Polyurethane zwitterionomers using 2,3-dihydroxypyridine. Eur Polym J 32:993–99810.1016/0014-3057(96)00032-8 ↗
52. Chen K, Liu R, Zou C, Shao Q, Lan Y, Cai X, Zhai L (2014) Linear polyurethane ionomers as solid–solid phase change materials for thermal energy storage. Sol Energy Mater Sol Cells 130:466–47310.1016/j.solmat.2014.07.036 ↗
53. Zander ZK, Wang F, Becker ML, Weiss RA (2016) Ionomer for tunable softening of thermoplastic polyurethane. Macromolecules 49:926–93410.1021/acs.macromol.6b00005 ↗
54. Kozakiewicz J (2015) Developments in aqueous polyurethane and polyurethane-acrylic dispersion technology Part I. Polyurethane dispersions. Polim (Pol) 60:525–53510.14314/polimery.2015.525 ↗
55. Król P, Król B, Lechowicz J (2013) Modelling the surface free energy parameters of polyurethane coats—part 1. Solvent base coats obtained from linear polyurethane elastomers. Colloid Polym Sci 291:1031–104710.1007/s00396-012-2826-4 ↗
56. Król B, Król P, Pikus S, Chmielarz P, Skrzypiec K (2010) Synthesis and characterisation of coating polyurethane cationomers containing fluorine built-in hard urethane segments. Colloid Polym Sci 288:1255–126910.1007/s00396-010-2244-4 ↗
57. Kozakiewicz J (2016) Developments in aqueous polyurethane and polyurethane-acrylic dispersion technology Part II. Polyurethane-acrylic dispersions and modification of polyurethane and polyurethane-acrylic dispersions. Polimery 61:79–15610.14314/polimery.2016.081 ↗
58. Akram N, Zia KM, Sattar R, Tabassum S, Saeed M (2019) Thermomechanical investigation of hydroxyl-terminated polybutadiene-based linear polyurethane elastomers. J Appl Polym Sci 136:47289
59. Ye S-H, Chen Y, Mao Z, Gu X, Shankarraman V, Hong Y, Ahanov V, Wagner WR (2018) Biodegradable zwitterions polymer coatings for magnesium alloy stents. Langmuir 35:1421–142910.1021/acs.langmuir.8b01623 ↗
60. Jérome R (1989) Halato-telechelic polymers: a new class of ionomers. Telechelic polymers: synthesis and applications. Department of Macromolecular Chemistry, University of Liege, Liege, pp 261–288
61. Wang Y-J, Jeng U-S, Hsu S-H (2018) Biodegradable water-based polyurethane shape memory elastomer for bone tissue engineering. ACS Biomater Sci Eng 4:1397–140610.1021/acsbiomaterials.8b00091 ↗
62. Liu H-L, Dai SA, Fu K-Y, Hsu S (2010) Antibacterial properties of silver nanoparticles in three different sizes and their nanocomposites with a new waterborne polyurethanes. Int J Nanomed 5:1017–102810.2147/IJN.S14572 ↗
63. Filip D, Macocinschi D, Paslaru E, Munteanu BS, Dumitriu RP, Lungu M, Vasile C (2014) Polyurethane biocompatible silver bionanocomposites for biomedical applications. J Nanoparticle Res 16:271010.1007/s11051-014-2710-x ↗
64. Buruiana T, Melinte V, Chibac A, Matiut S, Synthesis BS (2012) Evaluation and preliminary antibacterial testing of hybrid composites based on urethane oligomethacrylates and Ag nanocomposites. J Biomater Sci Polym Ed 23:955–97210.1163/092050611X566801 ↗
65. Filip D, Macocinschi D, Vlad S, Lisa G, Mariana Cristea M, Zaltariov MF (2016) Structure–property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications. J Appl Polym Sci 133:4292110.1002/app.42921 ↗
66. Piticescu RM, Popescu LM, Buruiana T (2012) Composites containing hydroxyapatite and polyurethane ionomers as bone substitution materials. Dig J Nanomater Biostruct 7:477–485
67. Pielichowska K, Pielichowski K (2014) Phase change materials for thermal energy storage. Prog Mater Sci 65:67–12310.1016/j.pmatsci.2014.03.005 ↗
68. Zhiyuan O, Fangeng C (2010) Synthesis of polyurethane-based hydrogels from liquefied bagasse. J Biobased Mater Bioenergy 4:346–35210.1166/jbmb.2010.1099 ↗
69. Daemi H, Barakani M (2014) Molecular engineering of manipulated alginate—based polyurethanes. Carbohydr Polym 112:638–64710.1016/j.carbpol.2014.06.023 ↗