Alloying, magnetic and corrosion behavior of AlCrFeMnNiTi high entropy alloy
Source abstract
Abstract
The present report describes phase formation, magnetic and corrosion behavior of the AlCrFeMnNiTi high entropy alloy (HEA) synthesized through mechanical alloying. Simple solid solution of FCC and BCC phases are evolved after 25 h of MA. DSC analysis confirms that the synthesized phases of AlCrFeMnNiTi HEA are stable up to 550 °C and a re-crystallization is occurred at temperature greater than 550 °C. In order to investigate the effect of annealing on phase formation and magnetic characteristics, the synthesized HEA was annealed at 700 °C for 1 h and found that the volume fraction of BCC phase decreased. The synthesized HEA shows better ferromagnetic behavior with Ms = 17.55 emu/g and Hc = 153.8 Oe as compared to some of the recently reported HEAs and previously reported CrFeMnNiTi HEA by us. Moreover, corrosion behavior of the annealed AlCrFeMnNiTi high entropy alloy in 0.5 M and 1 M NaCl solution is also investigated. It is found that the annealed HEA shows good corrosion resistance in 0.5 M NaCl solution due to the presence of Al.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Huang KH, Yeh JW (1996) A study on multicomponent alloy systems containing equal mole elements. M.S. thesis, National Tsing Hua University, Hsinchi
2. Yeh JW, Chen SK, Lin SJ et al (2004) Nanostructured high entropy alloys with multiple elements: novel alloy design concept and outcomes. Adv Eng Mater 6:299–30310.1002/adem.200300567 ↗
3. Yeh JW (2006) Recent progress in high entropy alloys. Ann chim-Sci Mater 31:633–64810.3166/acsm.31.633-648 ↗
4. Tsai MH, Yeh JW (2014) High-entropy alloy: a critical review. Mater Res Lett 2(3):107–12310.1080/21663831.2014.912690 ↗
5. Tsai MH, Wang CW, Tsai CW et al (2011) Thermal stability and performance of NbSiTaTiZr high entropy alloy barrier for copper metallization. J Electrochem Soc 158:H1161–H116510.1149/2.056111jes ↗
6. Fu Z, Chen W, Xiao M et al (2013) Fabrication and properties of naoncrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA-SPS technique. Mater Des 44:535–53910.1016/j.matdes.2012.08.048 ↗
7. Chuang MH, Tsai MH, Wang WR et al (2011) Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high entropy alloy. Acta Mater 59:6308–631710.1016/j.actamat.2011.06.041 ↗
8. Yeh JW (2013) Alloy design strategies and future trends in high entropy alloys. JOM 65:1759–177110.1007/s11837-013-0761-6 ↗
9. Cheng KH, Lai CH, Lin SJ et al (2006) Recent progress in multi-element alloy and nitride coatings sputtered from high entropy alloy targets. Ann Chim-Sci Mat 31:723–73610.3166/acsm.31.723-736 ↗
10. Chen YY, Duval T, Hong UT et al (2007) Corrosion properties of a novel bulk Cu0.5NiAlCoCrFeSi glassy alloy in 288°C high purity water. Mater Lett 61:2692–269610.1016/j.matlet.2006.03.158 ↗
11. Singh S, Wanderka N, Murty BS et al (2011) Decomposition in multi-component AlCoCrCuFeNi high entropy alloy. Acta Mater 59:182–19010.1016/j.actamat.2010.09.023 ↗
12. Zhang Y, Zuo TT, Tang Z et al (2014) Microstructures and properties of high entropy alloys. Prog Mater Sci 61:1–9310.1016/j.pmatsci.2013.10.001 ↗
13. Yeh JW, Chang SY, Hong YD et al (2007) Anomalous decrease in X-ray diffraction intensities of Cu–Ni–Al–Co–Cr–Fe–Si alloy systems with multi-principal element. Mater Chem Phys 103:41–4610.1016/j.matchemphys.2007.01.003 ↗
14. Li P, Wang A, Liu CT (2017) A ductile high entropy alloy with attractive magnetic properties. J Alloys Compd 694:55–6010.1016/j.jallcom.2016.09.186 ↗
15. Zhang Y, Zuo TT, Cheng YQ et al (2013) High entropy alloys with high saturation magnetization, electrical resistivity and malleability. Sci Rep 3:1455–146110.1038/srep01455 ↗
16. Yu PF, Zhang LJ, Chen H et al (2016) The high entropy alloys with high hardness and soft magnetic property prepared by mechanical alloying and high pressure sintering. Intermetallics 70:82–8710.1016/j.intermet.2015.11.005 ↗
17. Zuo TT, Gao MC, Ouyang L et al (2017) Tailoring magnetic behavior of CoFeMnNiX (X = Al, Cr, Ga, and Sn) high entropy alloys by metal doping. Acta Mater 130:10–1810.1016/j.actamat.2017.03.013 ↗
18. Zhang K, Fu Z (2012) Effects of annealing treatment on properties of CoCrFeNiTiAlx multi-component alloys. Intermetallics 28:34–3910.1016/j.intermet.2012.03.059 ↗
19. Zuo TT, Li RB, Ren XJ et al (2014) Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy. J Magn Magn Mater 371:60–6810.1016/j.jmmm.2014.07.023 ↗
20. Mishra RK, Shahi RR (2018) Magnetic characteristics of high entropy alloys. In: Panwar N (ed) Magnetism and magnetic materials. IntechOpen, Rijeka, pp 67–80
21. Lucas MS, Mauger L, Munoz JA et al (2011) Magnetic and vibrational properties of high entropy alloys. J Appl Phys 109:07E30710.1063/1.3538936 ↗
22. Mishra RK, Shahi RR (2017) Phase evolution and magnetic characteristics of TiFeNiCr and TiFeNiCrM(M = Mn, Co) high entropy alloys. J Magn Magn Mater 442:218–22310.1016/j.jmmm.2017.06.124 ↗
23. Shi Y, Yang B, Liaw PK (2017) Corrosion resistant high entropy alloys: a review. Metals 7(2):43–6110.3390/met7020043 ↗
24. Kao YF, Chen SK, Chen TJ et al (2011) Electrical, magnetic and Hall properties of AlxCoCrFeNi high entropy alloys. J Alloys Compd 509:1607–161410.1016/j.jallcom.2010.10.210 ↗
25. Yang X, Zhang Y (2012) Prediction of high entropy stabilized solid solution in multi-component alloys. Mater Chem Phys 132:233–23810.1016/j.matchemphys.2011.11.021 ↗
26. Manzoni A, Daoud H, Mondal S et al (2013) Investigation of phases in Al23Co15Cr23Cu8Fe15Ni16 and Al8Co17Cr17Cu8Fe17Ni33 high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc. J Alloys Compd 552:430–43610.1016/j.jallcom.2012.11.074 ↗
27. Manzoni A, Daoud H, Völkl R et al (2013) Phase separation in equiatomic AlCoCrFeNi high entropy alloy. Ultramicroscopy 132:212–21510.1016/j.ultramic.2012.12.015 ↗
28. Tsai MH, Yeh JW, Gan JY (2008) Diffusion barrier properties of AlMoNbSiTaTiVZr high entropy alloy layer between copper and silicon. Thin Solid Films 516:5527–553010.1016/j.tsf.2007.07.109 ↗
29. Wang YP, Li BS, Fu HZ (2009) Solid solution or intermetallics in a high entropy alloy. Adv Eng Mater 11:641–64410.1002/adem.200900057 ↗
30. Tsai MH, Yuan H, Cheng G et al (2013) Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy. Intermetallics 33:81–8610.1016/j.intermet.2012.09.022 ↗
31. Tsai MH, Yuan H, Cheng G et al (2013) Morphology, structure and composition of precipitates in Al0.3CoCrCu0.5FeNi high entropy alloy. Intermetallics 32:329–33610.1016/j.intermet.2012.07.036 ↗
32. Tung CC, Yeh JW, Shun TT et al (2007) On the elemental effect of AlCoCrCuFeNi high entropy alloy system. Mater Lett 61:1–510.1016/j.matlet.2006.03.140 ↗
33. Senkov ON, Scott JM, Senkova SV et al (2011) Microstructure and room temperature properties of a high entropy TaNbHfZrTi alloy. J Alloys Compd 509:6043–604810.1016/j.jallcom.2011.02.171 ↗
34. Mary SJ, Nagalakshmi R, Rajendran S et al (2014) High entropy alloy and corrosion resistance—a birds’s eye view. Eur Chem Bull 12:1031–1035
35. Tang Z, Huang L, He W et al (2014) Alloying and processing effects on the aqueous corrosion behavior of high-entropy alloys. Entropy 16:895–91110.3390/e16020895 ↗
36. Hsu YJ, Chiang WC, Wu JK (2005) Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution. Mater Chem Phys 92:112–11710.1016/j.matchemphys.2005.01.001 ↗
37. Lin CM, Tsai HL, Bor HY (2010) Effect of aging treatment on microstructure and properties of high entropy Cu0.5CoCrFeNi alloy. Intermetallics 18:1244–125010.1016/j.intermet.2010.03.030 ↗
38. Chou YL, Wang YC, Yeh JW et al (2010) Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.1Mo0.1 in chloride-containing sulphate solutions. Corros Sci 52:3481–349110.1016/j.corsci.2010.06.025 ↗
39. Chou YL, Yeh JW, Shih HC (2011) Effect of Molybdenum on the pitting resistance of Co1.5CrFeNi1.5Ti0.5Mox alloys in chloride solutions. Corrosion 67(8):085002-1–085002-610.5006/1.3613646 ↗
40. Kao YF, Lee TD, Chen SK et al (2010) Electrochemical passive properties of AlxCoCrFeNi (x = 0,0.25,0.50,1.00) alloys in sulfuric acid. Corros Sci 52:1026–103410.1016/j.corsci.2009.11.028 ↗
41. Li BY, Peng K, Hu AP et al (2013) Structure and properties of FeCoNiCrCu0.5Alx high-entropy alloy. Trans Nonferrous Met Soc China 23:735–74110.1016/S1003-6326(13)62523-6 ↗
42. Zhang JJ, Yin XL, Dong Y et al (2014) Corrosion properties of AlxCoCrFeNiTi0.5 high entropy alloys in 0.5M H2SO4 aqueous solution. Mater Res Innov 18:754–760
43. Ren B, Liu ZX, Li DM et al (2012) Corrosion behavior of CuCrFeNiMn high entropy alloy system in 1 M sulfuric acid solution. Mater Corros 63:828–83410.1002/maco.201005713 ↗
44. Qiu Y, Gibson MA, Fraser HL et al (2015) Corrosion characteristics of high entropy alloys. Mater Sci Technol 31:1233–123510.1179/1743284715Y.0000000026 ↗
45. Cullity BD, Stock SR (2014) Elements of X-ray diffraction, 3rd edn. Pearson Education Ltd, London
46. Nong ZS, Zhu JC, Zhao RD (2017) Prediction of structure and elastic properties of AlCrFeNiTi system high entropy alloys. Intermetallics 86:134–14610.1016/j.intermet.2017.03.014 ↗
47. Shahi RR, Yadav TP, Shaz MA et al (2008) Effects of mechanical milling on desorption kinetics and phase transformation of LiNH2/MgH2 mixture. Int J Hydrog Energy 33:6188–619410.1016/j.ijhydene.2008.07.029 ↗
48. Takeuchi A, Inoue A (2005) Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans 46:2817–282910.2320/matertrans.46.2817 ↗
49. Zhang K, Fu Z (2012) Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAlx high entropy alloys. Intermetallics 22:24–3210.1016/j.intermet.2011.10.010 ↗
50. Guo S, Ng C, Lu J et al (2011) Effect of valance electron concentration on stability of FCC or BCC phase in high entropy alloys. J Appl Phys 109:10350510.1063/1.3587228 ↗
51. Tsai MH, Chang KC, Li JH et al (2016) A second criterion for sigma phase formation in high entropy alloy. Mater Res Lett 4(2):90–9510.1080/21663831.2015.1121168 ↗
52. Mishra RK, Shahi RR (2018) Effect of annealing conditions and temperatures on phase formation and magnetic behavior of CrFeMnNiTi high entropy alloy. J Magn Magn Mater 465:169–17510.1016/j.jmmm.2018.04.056 ↗
53. Wang XF, Zhang Y, Qiao Y et al (2007) Novel microstructure and properties of multicomponet CoCrCuFeNiTix alloys. Intermetallics 15:357–36210.1016/j.intermet.2006.08.005 ↗
54. Qiu XW, Zhang YP, Liu CG (2014) Effect of Ti content on structure and properties of Al2CrFeNiCoCuTix high-entropy alloy coatings. J Alloys Compd 585:282–28610.1016/j.jallcom.2013.09.083 ↗
55. Ye Q, Feng K, Li Z et al (2017) Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating. Appl Surf Sci 396:1420–142610.1016/j.apsusc.2016.11.176 ↗
56. Qiu XW (2013) Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy. J Alloys Compd 555:246–24910.1016/j.jallcom.2012.12.071 ↗
57. Ismail KM, Fathi AM, Badawy WA (2004) Effect of Nickel content on the corrosion and passivation of Copper–Nickel alloys in sodium sulphate solutions. Corrosion 60:795–80310.5006/1.3287859 ↗
58. Zinola CF, Luna AMC (1995) The inhibition of Ni corrosion in H2SO4 solutions containing simple non-saturated substances. Corros Sci 37:1919–192910.1016/0010-938X(95)00074-T ↗
59. Hurtado MRF, Sumodjo PTA, Benedetti AV (2003) Electrochemical studies with a Cu-5 wt%Ni alloy in 0.5 M H2 SO4. Electrochim Acta 48:2791–279810.1016/S0013-4686(03)00413-4 ↗
60. Qiu XW, Liu CG (2013) Microstructure and properties of Al2CrFeCoCuTiNix high entropy alloys prepared by laser cladding. J Alloys Compd 553:216–22010.1016/j.jallcom.2012.11.100 ↗