Low-temperature plasma treatment of polylactic acid and PLA/HA composite material
Source abstract
Abstract
Investigations of the surface physicochemical properties of polylactic acid and polylactic acid/hydroxyapatite composite in a 70/30 ratio modified by atmospheric pressure low-temperature glow discharge argon plasma with the pulse duration of 1 μs and 5 μs and repetition rate of 100 kHz are described. Plasma modification of such materials may significantly affect physicochemical properties of surface. The polymerization of l-lactide was carried out at a temperature of 155 °C for 6 h. X-ray diffraction analysis shows that the degree of crystallinity of polylactic acid and composites based on polylactic acid/hydroxyapatite composite increases after plasma treatment due to polymer chain disruption. Infrared spectroscopy indicates that the –C=O absorption band intensity increases with plasma pulse duration, in turn indicating oxidation processes occurring in the polylactic acid surface layers. The wettability characteristics of the materials are improved by the plasma treatment, resulting in decreased water, glycerol, and ethylene glycol contact angle, and enhanced free surface energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Pukhova IV (2015) The effect of ion implantation on the surface polymer dielectric resistance. Reports of Tomsk State University of Control Systems and Radioelectronics, vol 38, pp 79–82 (in Russian)
2. Garlotta D (2001) A literature review of poly(lactic acid). J Polym Environ 9:63–84. https://doi.org/10.1023/A:102020082243510.1023/A:1020200822435 ↗
3. Mehta R, Kumar V, Bhunia H, Upadhyay SN (2005) Synthesis of poly(lactic acid): a review. J Macromol Sci Part C 45:325–349. https://doi.org/10.1080/1532179050030414810.1080/15321790500304148 ↗
4. Ma Z, Gao C, Ji J, Shen J (2002) Protein immobilization on the surface of poly-l-lactic acid films for improvement of cellular interactions. Eur Polym J 38:2279–2284. https://doi.org/10.1016/S0014-3057(02)00119-210.1016/S0014-3057(02)00119-2 ↗
5. Ng HM, Bee ST, Ratnam CT, Sin LT, Phang YY, Tee TT, Rahmat AR (2014) Effectiveness of trimethylopropane trimethacrylate for the electron-beam-irradiation-induced cross-linking of polylactic acid. Nuclear Instrum Methods Phys B 319:62–70. https://doi.org/10.1016/j.nimb.2013.10.02710.1016/j.nimb.2013.10.027 ↗
6. Loo JSC, Ooi CP, Boey FYC (2005) Degradation of poly (lactide-coglycolide) (PLGA) and poly(-lactide) (PLA) by electron beam radiation. Biomaterials 26:1359–1367. https://doi.org/10.1016/j.biomaterials.2004.05.00110.1016/j.biomaterials.2004.05.001 ↗
7. Izdebska-Podsiadły J, Dorsam E (2017) Effects of argon low temperature plasma on PLA film surface and aging behaviors. Vacuum 145:278–284. https://doi.org/10.1016/j.vacuum.2017.09.00110.1016/j.vacuum.2017.09.001 ↗
8. Techaikool P, Daranarong D, Kongsuk J, Boonyawan D, Haron N, Harley WS, Thomson KA, Foster J, Punyodom W (2017) Effects of plasma treatment on biocompatibility of poly[(l-lactide)-co-(ε-caprolactone)] and poly[(l-lactide)-co-glycolide] electrospun nanofibrous membranes. Soc Chem Ind 66:1640–1650. https://doi.org/10.1002/pi.542710.1002/pi.5427 ↗
9. Moraczewski K, Mroz W, Budner B, Malinowski R, Zenkiewicz M (2016) Laser modification of polylactide surface layer prior autocatalytic metallization. Surf Coat Technol 304:68–75. https://doi.org/10.1016/j.surfcoat.2016.06.08510.1016/j.surfcoat.2016.06.085 ↗
10. Zaidi L, Bruzaud S, Kaci M, Boumaud A, Gautier N, Grohens Y (2013) The effects of gamma irradiation on the morphology and properties of polylactide/Cloisite 30B nanocomposites. Polym Degrad Stab 98:341–348. https://doi.org/10.1016/j.polymdegradstab.2012.09.01410.1016/j.polymdegradstab.2012.09.014 ↗
11. Chen JP, Su CH (2011) Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering. Acta Biomater 7:234–243. https://doi.org/10.1016/j.actbio.2010.08.01510.1016/j.actbio.2010.08.015 ↗
12. Ho MH, Lee JJ, Fan SC, Wang DM, Hou LT, Hsieh HJ, Lai JY (2007) Efficient modification on PLLA by ozone treatment for biomedical applications. Macromol Biosci 7:467–474. https://doi.org/10.1002/mabi.20060024110.1002/mabi.200600241 ↗
13. Bartolo P, Kruth JP, Silva J, Levy G, Malshe A, Rajurkar K, Mitsuishi M, Ciurana J, Leu M (2012) Biomedical production of implants by additive electro-chemical and physical processes. CIRP Ann Manuf Technol 61:635–655. https://doi.org/10.1016/j.cirp.2012.05.00510.1016/j.cirp.2012.05.005 ↗
14. Sviridov DV (2003) Ion implantation in polymers: chemical aspects, chemical problems of the development of new. Mater Technol 1:88–106
15. Popok VN (2012) Ion implantation of polymers: formation of nanoparticulate materials. Rev Adv Mater Sci 30:1–26
16. Tóth A, Kereszturi K, Mohai M, Bertóti I (2010) Plasma based ion implantation of engineering polymers. Surf Coat Technol 204:2898–2908. https://doi.org/10.1016/j.surfcoat.2009.12.00410.1016/j.surfcoat.2009.12.004 ↗
17. Schiller TL, Sheeja D, McKenzie DR, McCulloch DG, Lau DSP, Burn S, Tay BK (2004) Plasma immersion ion implantation of poly(tetrafluoroethylene). Surf Coat Technol 483:177–178. https://doi.org/10.1016/S0257-8972(03)00916-210.1016/S0257-8972(03)00916-2 ↗
18. Slepickova Kasalkova N, Slepicka P, Bacakova L, Sajdl P, Svorcik V (2013) Biocompatibility of plasma nanostructured biopolymers. Nucl Instrum Methods Phys Res 307:642–646. https://doi.org/10.1016/j.nimb.2012.10.03510.1016/j.nimb.2012.10.035 ↗
19. Khorasani MT, Mirzadeh H, Irani S (2008) Plasma surface modification of poly (l-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion. Radiat Phys Chem 77:280–287. https://doi.org/10.1016/j.radphyschem.2007.05.01310.1016/j.radphyschem.2007.05.013 ↗
20. Sokullu-Urkac E, Oztarhan A, Tihminlioglu F, Nikolaev A, Brown I (2012) Oxidation behavior of C- and Au-ion-implanted biodegradable polymers. IEEE Trans Plasma Sci 40:863–869. https://doi.org/10.1109/TPS.2011.217967710.1109/TPS.2011.2179677 ↗
21. Gao M, Sun L, Guo Y, Shi J, Zhang J (2017) Modification of polyethylene terephthalate (PET) films surface with gradient roughness and homogenous surface chemistry by dielectric barrier discharge plasma. Chem Phys Letters 689:179–184. https://doi.org/10.1016/j.cplett.2017.10.00910.1016/j.cplett.2017.10.009 ↗
22. Song AY, Oh YA, Roh SH, Kim JH, Min SC (2015) Cold oxygen plasma treatments for the improvement of the physicochemical and biodegradable properties of polylactic acid films for food packaging. Food Eng Mater Sci 81:86–96. https://doi.org/10.1111/1750-3841.1317210.1111/1750-3841.13172 ↗
23. Tverdokhlebov SI, Bolbasov EN, Shesterikov EV, Antonov LV, Golovkin AS, Matveev VG, Petlin DG, Anissimov YG (2015) Modification of polylactic acid surface using RF plasma discharge with sputter deposition of a hydroxyapatite target for increased biocompatibility. Appl Surf Sci 329:32–39. https://doi.org/10.1016/j.apsusc.2014.12.12710.1016/j.apsusc.2014.12.127 ↗
24. Gordeeva OS, Botvin VV, Filimoshkin AG (2015) Synthesis of oligomers from l-lactic acids and lactide from these oligomers. In: Multifunctional chemical materials and technologies, International scientific conference vol 2, pp 71–73
25. YeG Shapovalova, Ly’tkina DN, Kurzina IA, Kzhy’shkovska YG (2016) Preparation of biocompatible composites based on poly-l-lactide/hydroxyapatite and investigation of their anti-inflammatory activity. Key Eng Mater 683:475–480. https://doi.org/10.4028/www.scientific.net/KEM.683.47510.4028/www.scientific.net/KEM.683.475 ↗
26. Korotchenko NM, Rasskazova LA (2014) The method of obtaining silicon-modified hydroxyapatite using microwave radiation (NR TSU) Ru 2507151 (in Russian)
27. Syusyukina VA, Shapovalova YG, Korotchenko NM, Kurzina IA (2017) Structural-phase state and surface properties of composite materials based on polylactide and hydroxyapatite. Russ J Appl Chem 90:106–112. https://doi.org/10.1134/S107042721701016510.1134/S1070427217010165 ↗
28. Savkin KP, Bugaev AS, Vizir AV, Gushenets VI, Nikolaev AG, Oks EM, Puhova IV, Frolova VP, Shandrikov MV, Yushkov GY (2016) Atmospheric plasma generator based on the discharge in argon flow. In: International congress on energy fluxes and radiation effects conference proceedings, vol 157, p 193
29. Savkin KP, Nikolaev AG, Vizir AV, Oks EM, Yushkov GYu, Shandrikov MV, Frolova VP, Vasenina IV (2018) Atmospheric pressure discharge plasma source for biocompatible polymers treatment. Russ Phys J 728:13–17 (in Russian)
30. Inagaki M, Kang F (2016) Materials science and engineering of carbon characterization. Elsevier, London, pp 153–173
31. Bico J, Thiele U, Quere D (2002) Wetting of textured surfaces. Colloids Surf 206:41–46. https://doi.org/10.1016/S0927-7757(02)00061-410.1016/S0927-7757(02)00061-4 ↗
32. Yang J, Wan Y, Yang J, Bei J, Wang S (2003) Plasma-treated, collagen-anchored polylactone: its cell affinity evaluation under shear or shear-free conditions. J Biomed Mater Res 67A:1139–1147. https://doi.org/10.1002/jbm.a.1003410.1002/jbm.a.10034 ↗
33. Shen H, Hu X, Yang F, Bei J, Wang S (2007) Combining oxygen plasma treatment with anchorage of cationized gelatin for enhancing cell affinity of poly(lactide-co-glycolide). Biomaterials 28:4219–4230. https://doi.org/10.1016/j.biomaterials.2007.06.00410.1016/j.biomaterials.2007.06.004 ↗
34. Guerrouani N, Baldo A, Bouffin A, Drakides C, Guimon MF, Allylamine AM (2007) Plasma-polymerization on PLLA surface evaluation of the biodegradation. J Appl Polym Sci 105:1978–1986. https://doi.org/10.1002/app.2638810.1002/app.26388 ↗
35. Beamson G, Briggs D (1992) High resolution XPS of organic polymers. Wiley, Chichester
36. Kondyurin A, Bilek M (2008) Ion beam treatment of polymers. Elsevier, London
37. Bohner M (2000) Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements. Injury 31:37–47. https://doi.org/10.1016/S0020-1383(00)80022-410.1016/S0020-1383(00)80022-4 ↗
38. Layrolle P (1998) Sol–gel synthesis of amorphous calcium phosphate and sintering into microporous hydroxyapatite bioceramics. J Am Ceram Soc 81:1421–1428. https://doi.org/10.1111/j.1151-2916.1998.tb02499.x10.1111/j.1151-2916.1998.tb02499.x ↗
39. Legeros RZ, Lin S, Rohanizadeh R, Mijares D, Legeros JP (2003) Biphasic calcium phosphate bioceramics: preparation, properties and applications. J Mater Sci Mater Med 14:201–209. https://doi.org/10.4028/www.scientific.net/kem.240-242.47310.1023/A:1022872421333 ↗
40. Averyanova M, Bertrand P, Verquin B (2011) Manufacture of Co-Cr dental crowns and bridges by selective laser melting technology. Virtual Phys Prototype 6:179–185. https://doi.org/10.1080/17452759.2011.61908310.1080/17452759.2011.619083 ↗
41. Nakamoto K (2008) Infrared and Raman spectra of inorganic and coordination compounds. Wiley, New York10.1002/9780470405888 ↗
42. Chichti E, Henrion G, Cleymand F, Jamshidian M, Linder M, Arab-Tehrany E (2013) Effects of Ar–N2–O2 microwave plasma on poly-l-lactic acid thin films designed for tissue engineering. Plasma Process Polym 10:535–543. https://doi.org/10.1002/ppap.20120012410.1002/ppap.201200124 ↗
43. Pankaj SK, Bueno-Ferrer C, Misra NN, O’Neill L, Jiménez A, Bourke P, Cullen PJ (2014) Characterization of polylactic acid films for food packaging as affected by dielectric barrier discharge atmospheric plasma. Innov Food Sci Emerg Technol 21:107–113. https://doi.org/10.1016/j.ifset.2013.10.00710.1016/j.ifset.2013.10.007 ↗
44. Tenn N, Follain N, Fatyeyeva K, Poncin-Epaillard F, Labrugere C, Marais S (2014) Impact of hydrophobic plasma treatments on the barrier properties of poly(lactic acid) films. RSC Adv 4:5626–5637. https://doi.org/10.1039/C3RA45323E10.1039/c3ra45323e ↗