Development of Al–Nb–B master alloy with high Nb/B ratio for grain refinement of hypoeutectic Al–Si cast alloys
Source abstract
Abstract
Al–Nb–B master alloy has been regarded as a promising grain refiner that can reduce grain size of hypoeutectic Al–Si casting alloys. However, its grain refinement performance remains to be improved. In this work, the grain refinement efficacy of Al–Nb–B master alloy is significantly enhanced by modifying the Nb/B ratio through thermodynamic calculation. An Al–Nb–B master alloy with optimum Nb/B ratio of ~ 10:1 provides a fully equiaxed structure across the sections of the Al–10Si and commercial Al–9Si–0.08Ti alloys with an average grain size below 220 μm. The phenomenon is attributed to the existence of NbAl3 and the higher number density of NbB2 at the Nb/B ratio of ~ 10:1, which offers sufficient active nucleating sites to promote the formation of smaller grains. Moreover, the segregation behavior of Si atoms and interfacial energies after doping Si are investigated by first-principles calculations, and the results reveal that Si tends to segregate to the NbAl3/α-Al interface, whereas grain refining potency of NbAl3 for Al remains unchanged. This study has implications for strategic design of Al–Si cast alloy with fine and equiaxed grain structure inoculated by grain refiner.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Wang K, Jiang HY, Jia YW, Zhou H, Wang QD, Ye B, Ding WJ (2016) Nanoparticle-inhibited growth of primary aluminum in Al–10Si alloys. Acta Mater 103:252–263. https://doi.org/10.1016/j.actamat.2015.10.00510.1016/j.actamat.2015.10.005 ↗
2. Liao H, Zhang M, Wu Q, Wang H, Sun G (2007) Refinement of eutectic grains by combined addition of strontium and boron in near-eutectic Al–Si alloys. Scr Mater 57:1121–1124. https://doi.org/10.1016/j.scriptamat.2007.08.02610.1016/j.scriptamat.2007.08.026 ↗
3. Murty BS, Kori SA, Chakraborty M (2002) Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying. Int Mater Rev 47:3–29. https://doi.org/10.1179/09506600122500104910.1179/095066001225001049 ↗
4. Vinod Kumar GS, Murty BS, Chakraborty M (2010) Effect of TiAl3 particles size and distribution on their settling and dissolution behaviour in aluminium. J Mater Sci 45:2921–2929. https://doi.org/10.1007/s10853-010-4284-z10.1007/s10853-010-4284-z ↗
5. Fan Z, Wang Y, Zhang Y, Qin T, Zhou XR, Thompson GE, Pennycook T, Hashimoto T (2015) Grain refining mechanism in the Al/Al–Ti–B system. Acta Mater 84:292–304. https://doi.org/10.1016/j.actamat.2014.10.05510.1016/j.actamat.2014.10.055 ↗
6. Yu H, Wang N, Guan R, Tie D, Li Z, An Y, Zhang Y (2018) Evolution of secondary phase particles during deformation of Al–5Ti–1B master alloy and their effect on α-Al grain refinement. J Mater Sci Technol 34:2297–2306. https://doi.org/10.1016/j.jmst.2018.04.01810.1016/j.jmst.2018.04.018 ↗
7. Qiu D, Taylor JA, Zhang MX, Kelly PM (2007) A mechanism for the poisoning effect of silicon on the grain refinement of Al–Si alloys. Acta Mater 55:1447–1456. https://doi.org/10.1016/j.actamat.2006.09.04610.1016/j.actamat.2006.09.046 ↗
8. Quested TE, Dinsdale AT, Greer AL (2013) Thermodynamic evidence for a poisoning mechanism in the Al–Si–Ti system. Mater Sci Technol 22:1126–1134. https://doi.org/10.1179/174328406X11423410.1179/174328406X114234 ↗
9. Li Y, Gu QF, Luo Q, Pang Y, Chen SL, Chou KC, Wang XL, Li Q (2016) Thermodynamic investigation on phase formation in the Al–Si rich region of Al–Si–Ti system. Mater Des 102:78–90. https://doi.org/10.1016/j.matdes.2016.03.14410.1016/j.matdes.2016.03.144 ↗
10. Banjeri A, Reif W, Feng Q (1994) Metallographic investigation of TiC nucleants in the newly developed Al–Ti–C grain refiner. J Mater Sci 29:1958–1965. https://doi.org/10.1007/BF0035132010.1007/BF00351320 ↗
11. Yang H, Gao T, Wang H, Nie J, Liu X (2017) Influence of C/Ti stoichiometry in TiCx on the grain refinement efficiency of Al–Ti–C master alloy. J Mater Sci Technol 33:616–622. https://doi.org/10.1016/j.jmst.2017.04.01510.1016/j.jmst.2017.04.015 ↗
12. Nie J, Ding H, Wu Y, Liu X (2013) Fabrication of titanium diboride-carbon core-shell structure particles and their application as high-efficiency grain refiners of wrought aluminum alloys. Scr Mater 68:789–792. https://doi.org/10.1016/j.scriptamat.2013.01.02610.1016/j.scriptamat.2013.01.026 ↗
13. Birol Y (2009) A novel Al–Ti–B alloy for grain refining Al–Si foundry alloys. J Alloys Compd 486:219–222. https://doi.org/10.1016/j.jallcom.2009.07.06410.1016/j.jallcom.2009.07.064 ↗
14. Dong X, Ji S (2018) Si poisoning and promotion on the microstructure and mechanical properties of Al–Si–Mg cast alloys. J Mater Sci 53:7778–7792. https://doi.org/10.1007/s10853-018-2022-010.1007/s10853-018-2022-0 ↗
15. Wang T, Chen Z, Fu H, Xu J, Fu Y, Li T (2011) Grain refining potency of Al–B master alloy on pure aluminum. Scr Mater 64:1121–1124. https://doi.org/10.1016/j.scriptamat.2011.03.00110.1016/j.scriptamat.2011.03.001 ↗
16. Chen Z, Kang H, Fan G, Li J, Lu Y, Jie J, Zhang Y, Li T, Jian X, Wang T (2016) Grain refinement of hypoeutectic Al–Si alloys with B. Acta Mater 120:168–178. https://doi.org/10.1016/j.actamat.2016.08.04510.1016/j.actamat.2016.08.045 ↗
17. López VH, Scoles A, Kennedy AR (2003) The thermal stability of TiC particles in an Al7wt.%Si alloy. Mater Sci Eng A 356:316–325. https://doi.org/10.1016/s0921-5093(03)00143-610.1016/S0921-5093(03)00143-6 ↗
18. Vinod Kumar GS, Murty BS, Chakraborty M (2005) Development of Al–Ti–C grain refiners and study of their grain refining efficiency on Al and Al–7Si alloy. J Alloys Compd 396:143–150. https://doi.org/10.1016/j.jallcom.2004.12.03910.1016/j.jallcom.2004.12.039 ↗
19. Birol Y (2012) Performance of AlTi5B1, AlTi3B3 and AlB3 master alloys in refining grain structure of aluminium foundry alloys. Mater Sci Technol 28:481–486. https://doi.org/10.1179/1743284711y.000000005810.1179/1743284711Y.0000000058 ↗
20. Alamdari HD, Dubé D, Tessier P (2013) Behavior of boron in molten aluminum and its grain refinement mechanism. Metall Mater Trans A 44:388–394. https://doi.org/10.1007/s11661-012-1388-x10.1007/s11661-012-1388-x ↗
21. Nadendla H, Nowak M (2013) Method of refining metal alloys. USA Patent
22. Nowak M, Bolzoni L, Babu NH (2015) Grain refinement of Al–Si alloys by Nb–B inoculation. Part I: concept development and effect on binary alloys. Mater Des 66:366–375. https://doi.org/10.1016/j.matdes.2014.08.06610.1016/j.matdes.2014.08.066 ↗
23. Bolzoni L, Nowak M, Babu NH (2015) Grain refinement of Al–Si alloys by Nb–B inoculation. Part II: application to commercial alloys. Mater Des 66:376–383. https://doi.org/10.1016/j.matdes.2014.08.06710.1016/j.matdes.2014.08.067 ↗
24. Bolzoni L, Babu NH (2015) Refinement of the grain size of the LM25 alloy (A356) by 96Al–2Nb–2B master alloy. J Mater Process Technol 222:219–223. https://doi.org/10.1016/j.jmatprotec.2015.03.01110.1016/j.jmatprotec.2015.03.011 ↗
25. Bolzoni L, Nowak M, Babu NH (2015) Assessment of the influence of Al–2Nb–2B master alloy on the grain refinement and properties of LM6 (A413) alloy. Mater Sci Eng A 628:230–237. https://doi.org/10.1016/j.msea.2015.01.05310.1016/j.msea.2015.01.053 ↗
26. Bolzoni L, Babu HN (2018) Efficacy of borides in grain refining Al–Si alloys. Metall Mater Trans A 50:746–756. https://doi.org/10.1007/s11661-018-5017-110.1007/s11661-018-5017-1 ↗
27. Bolzoni L, Xia M, Babu NH (2016) Formation of equiaxed crystal structures in directionally solidified Al–Si alloys using Nb-based heterogeneous nuclei. Sci Rep 6:39554–39563. https://doi.org/10.1038/srep3955410.1038/srep39554 ↗
28. Bolzoni L, Nowak M, Babu NH (2015) On the effect of Nb-based compounds on the microstructure of Al–12Si alloy. Mater Chem Phys 162:340–345. https://doi.org/10.1016/j.matchemphys.2015.05.07610.1016/j.matchemphys.2015.05.076 ↗
29. Li Y, Hu B, Gu Q, Liu B, Li Q (2019) Achievement in grain-refining hypoeutectic Al–Si alloys with Nb. Scr Mater 160:75–80. https://doi.org/10.1016/j.scriptamat.2018.09.03710.1016/j.scriptamat.2018.09.037 ↗
30. Wang F, Qiu D, Liu ZL, Taylor JA, Easton MA, Zhang MX (2014) Crystallographic study of grain refinement of Al by Nb addition. J Appl Crystallogr 47:770–779. https://doi.org/10.1107/s160057671400447610.1107/S1600576714004476 ↗
31. Ding J, Cui C, Sun Y, Shi J, Cui S, Ma Q (2018) Preparation of in situ Al3Nb–NbB2–NbC/Al inoculant and its effect on microstructures and properties of weldable Al–Cu–Mn alloy. Mater Sci Eng A 738:273–282. https://doi.org/10.1016/j.msea.2018.09.11010.1016/j.msea.2018.09.110 ↗
32. Wang F, Liu Z, Qiu D, Taylor JA, Easton MA, Zhang MX (2013) Revisiting the role of peritectics in grain refinement of Al alloys. Acta Mater 61:360–370. https://doi.org/10.1016/j.actamat.2012.09.07510.1016/j.actamat.2012.09.075 ↗
33. Bolzoni L, Babu NH (2016) Engineering the heterogeneous nuclei in Al–Si alloys for solidification control. Appl Mater Today 5:255–259. https://doi.org/10.1016/j.apmt.2016.11.00110.1016/j.apmt.2016.11.001 ↗
34. Witusiewicz VT, Bondar AA, Hecht U, Zollinger J, Velikanova TY (2014) The Al–B–Nb–Ti system. VI. Experimental studies and thermodynamic modeling of the constituent Al–B–Nb system. J Alloys Compd 587:234–250. https://doi.org/10.1016/j.jallcom.2013.10.14210.1016/j.jallcom.2013.10.142 ↗
35. Quested TE, Greer AL (2004) The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys. Acta Mater 52:3859–3868. https://doi.org/10.1016/j.actamat.2004.04.03510.1016/j.actamat.2004.04.035 ↗
36. Nowak M, Yeoh WK, Bolzoni L, Babu NH (2015) Development of Al–Nb–B master alloys using Nb and KBF4 powders. Mater Des 75:40–46. https://doi.org/10.1016/j.matdes.2015.03.01010.1016/j.matdes.2015.03.010 ↗
37. Hu B, Wang P, Lu Q (2018) Increasing strength of an aluminum alloy. USA Patent
38. Ding H, Liu X, Yu L, Zhao G (2007) The influence of forming processes on the distribution and morphologies of TiC in Al–Ti–C master alloys. Scr Mater 57:575–578. https://doi.org/10.1016/j.scriptamat.2007.06.02810.1016/j.scriptamat.2007.06.028 ↗
39. Birol Y (2013) Design of potent grain refiners for wrought aluminium alloys. Int J Cast Met Res 26:273–278. https://doi.org/10.1179/1743133613y.000000006010.1179/1743133613Y.0000000060 ↗
40. Jones GP, Pearson J (1976) Factors affecting the grain-refinement of aluminum using titanium and boron additives. Metall Mater Trans B 7:223–234. https://doi.org/10.1007/BF0265492110.1007/BF02654921 ↗
41. Chen Z, Wang T, Gao L, Fu H, Li T (2012) Grain refinement and tensile properties improvement of aluminum foundry alloys by inoculation with Al–B master alloy. Mater Sci Eng A 553:32–36. https://doi.org/10.1016/j.msea.2012.05.08810.1016/j.msea.2012.05.088 ↗
42. Sigworth GK, Kuhn TA (2007) Grain refinement of aluminum casting alloys. Int J Metalcast 1:31–40. https://doi.org/10.1007/BF0335541610.1007/BF03355416 ↗
43. Wang Y, Fang CM, Zhou L, Hashimoto T, Zhou X, Ramasse QM, Fan Z (2019) Mechanism for Zr poisoning of Al–Ti–B based grain refiners. Acta Mater 164:428–439. https://doi.org/10.1016/j.actamat.2018.10.05610.1016/j.actamat.2018.10.056 ↗
44. Bramfitt BL (1970) The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron. Metall Trans 1:1987–1995. https://doi.org/10.1007/BF0264279910.1007/BF02642799 ↗
45. Ding Y, Xu R (2017) First-principles study of the Al(001)-Al3Nb(001) interfacial properties. Surf Sci 657:104–110. https://doi.org/10.1016/j.susc.2016.12.00110.1016/j.susc.2016.12.001 ↗
46. Eustathopoulos N, Coudurier L, Joud JC, Desré P (1976) Tension interfaciale solide-liquide des systémes Al–Sn, Al–In et Al–Sn–In. J Cryst Growth 33:105–115. https://doi.org/10.1016/0022-0248(76)90085-310.1016/0022-0248(76)90085-3 ↗
47. Clark SJ, Segall MD, Pickard CJ, Hasnip PJ, Probert MI, Refson K, Payne MC (2005) First principles methods using CASTEP. Z für Krist Cryst Mater 220:567–570. https://doi.org/10.1524/zkri.220.5.567.6507510.1524/zkri.220.5.567.65075 ↗
48. Chao D, Xu B, Ping W, Li Q (2017) Stability of the Al/TiB2 interface and doping effects of Mg/Si. Appl Surf Sci 425:639–645. https://doi.org/10.1016/j.apsusc.2017.06.22710.1016/j.apsusc.2017.06.227 ↗
49. Zhuo Z, Mao H, Xu H, Fu Y (2018) Density functional theory study of Al/NbB2 heterogeneous nucleation interface. Appl Surf Sci 456:37–42. https://doi.org/10.1016/j.apsusc.2018.06.07610.1016/j.apsusc.2018.06.076 ↗
50. Greer AL, Bunn AM, Tronche A, Evans PV, Bristow DJ (2000) Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–B. Acta Mater 48:2823–2835. https://doi.org/10.1016/s1359-6454(00)00094-x10.1016/S1359-6454(00)00094-X ↗
51. Brandes EA (1983) Smithells metals reference book. Butterworths, London