Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics
Source abstract
Abstract
Abstract Alloys processed by laser powder-bed fusion show distinct microstructures composed of dislocation cells, dispersed nanoparticles, and columnar grains. Upon post-build annealing, such alloys show sluggish recrystallization kinetics compared to the conventionally processed counterpart. To understand this behavior, AISI 316L stainless steel samples were constructed using the island scan strategy. Rhodonite-like (MnSiO3) nanoparticles and dislocation cells are found within weakly-textured grains in the as-built condition. Upon isothermal annealing at 1150 °C (up to 2880 min), the nucleation of recrystallization occurs along the center of the melt pool, where nuclei sites, high stored elastic energy, and local large misorientation are found in the as-built condition. The low value of the Avrami coefficient (n = 1.16) can be explained based on the non-random distribution of nucleation sites. The local interaction of the recrystallization front with nanoparticles speeds up their coarsening causing the decrease of the Zener-Smith pinning force. This allows the progression of recrystallization in LPBF alloys, although sluggish. These results allow us to understand the progress of recrystallization in LPBF 316L stainless steel, shedding light on the nucleation mechanisms and on the competition between driving and dragging pressures in non-conventional microstructures. They also help to understand the most relevant microstructural aspects applicable for tuning microstructures and designing new LPBF alloys. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Gu DD, Meiners W, Wissenbach K, Poprawe R (2012) Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev 57:133–164. https://doi.org/10.1179/1743280411Y.000000001410.1179/1743280411Y.0000000014 ↗
2. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
3. Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS (2016) The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 61:315–360. https://doi.org/10.1080/09506608.2015.111664910.1080/09506608.2015.1116649 ↗
4. Niendorf T, Leuders S, Riemer A, Richard HA, Tröster T, Schwarze D (2013) Highly anisotropic steel processed by selective laser melting. Metall Mater Trans B Process Metall Mater Process Sci 44:794–796. https://doi.org/10.1007/s11663-013-9875-z10.1007/s11663-013-9875-z ↗
5. Thijs L, Montero Sistiaga ML, Wauthle R, Xie Q, Kruth JP, Van Humbeeck J (2013) Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum. Acta Mater 61:4657–4668. https://doi.org/10.1016/j.actamat.2013.04.03610.1016/j.actamat.2013.04.036 ↗
6. Carter LN, Martin C, Withers PJ, Attallah MM (2014) The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy. J Alloys Compd 615:338–347. https://doi.org/10.1016/j.jallcom.2014.06.17210.1016/j.jallcom.2014.06.172 ↗
7. Kok Y, Tan XP, Wang P, Nai MLS, Loh NH, Liu E, Tor SB (2018) Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des 139:565–586. https://doi.org/10.1016/j.matdes.2017.11.02110.1016/j.matdes.2017.11.021 ↗
8. Murr LE (2018) A metallographic review of 3D printing/additive manufacturing of metal and alloy products and components. Metallogr Microstruct Anal 7:103–132. https://doi.org/10.1007/s13632-018-0433-610.1007/s13632-018-0433-6 ↗
9. Bajaj P, Hariharan A, Kini A, Kürnsteiner P, Raabe D, Jägle EA (2020) Steels in additive manufacturing: a review of their microstructure and properties. Mater Sci Eng A. 772:138633. https://doi.org/10.1016/j.msea.2019.13863310.1016/j.msea.2019.138633 ↗
10. Wang YM, Voisin T, McKeown JT, Ye J, Calta NP, Li Z, Zeng Z, Zhang Y, Chen W, Roehling TT, Ott RT, Santala MK, Depond PJ, Matthews MJ, Hamza AV, Zhu T (2017) Additively manufactured hierarchical stainless steels with high strength and ductility. Nat Mater. 17: 63–71. https://doi.org/10.1038/nmat502110.1038/nmat5021 ↗
11. Lou X, Andresen PL, Rebak RB (2018) Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior. J Nucl Mater 499:182–190. https://doi.org/10.1016/j.jnucmat.2017.11.03610.1016/j.jnucmat.2017.11.036 ↗
12. Tang M, Pistorius PC (2017) Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting. Int J Fatigue 94:192–201. https://doi.org/10.1016/j.ijfatigue.2016.06.00210.1016/j.ijfatigue.2016.06.002 ↗
13. Gasper AND, Hickman D, Ashcroft I, Sharma S, Wang X, Szost B, Johns D, Clare AT (2019) Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X. Powder Technol 354:333–337. https://doi.org/10.1016/j.powtec.2019.06.00410.1016/j.powtec.2019.06.004 ↗
14. Yan F, Xiong W, Faierson E, Olson GB (2018) Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion. Scr Mater 155:104–108. https://doi.org/10.1016/j.scriptamat.2018.06.01110.1016/j.scriptamat.2018.06.011 ↗
15. Song B, Dong S, Liu Q, Liao H, Coddet C (2014) Vacuum heat treatment of iron parts produced by selective laser melting: microstructure, residual stress and tensile behavior. Mater Des 54:727–733. https://doi.org/10.1016/j.matdes.2013.08.08510.1016/j.matdes.2013.08.085 ↗
16. Kanagarajah P, Brenne F, Niendorf T, Maier HJ (2013) Inconel 939 processed by selective laser melting: effect of microstructure and temperature on the mechanical properties under static and cyclic loading. Mater Sci Eng A 588:188–195. https://doi.org/10.1016/j.msea.2013.09.02510.1016/j.msea.2013.09.025 ↗
17. Hengsbach F, Koppa P, Duschik K, Holzweissig MJ, Burns M, Nellesen J, Tillmann W, Tröster T, Hoyer K-P, Schaper M (2017) Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Mater Des 133:136–142. https://doi.org/10.1016/j.matdes.2017.07.04610.1016/j.matdes.2017.07.046 ↗
18. Suzuki H (1983) Weldability of modern structural steels in Japan. Trans Iron Steel Inst Japan 23:189–204. https://doi.org/10.2355/isijinternational1966.23.18910.2355/isijinternational1966.23.189 ↗
19. Liu F, Lin X, Yang G, Song M, Chen J, Huang W (2011) Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy. Opt Laser Technol 43:208–213. https://doi.org/10.1016/j.optlastec.2010.06.01510.1016/j.optlastec.2010.06.015 ↗
20. Bertsch KM, Meric de Bellefon G, Kuehl B, Thoma DJ (2020) Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L. Acta Mater 199:19–33. https://doi.org/10.1016/j.actamat.2020.07.06310.1016/j.actamat.2020.07.063 ↗
21. Deng P, Yin H, Song M, Li D, Zheng Y, Prorok BC, Lou X (2020) On the thermal stability of dislocation cellular structures in additively manufactured austenitic stainless steels: roles of heavy element segregation and stacking fault energy. Jom 72:4232–4243. https://doi.org/10.1007/s11837-020-04427-710.1007/s11837-020-04427-7 ↗
22. Chen N, Ma G, Zhu W, Godfrey A, Shen Z, Wu G, Huang X (2019) Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment. Mater Sci Eng A 759:65–69. https://doi.org/10.1016/j.msea.2019.04.11110.1016/j.msea.2019.04.111 ↗
23. Salman OO, Gammer C, Chaubey AK, Eckert J, Scudino S (2019) Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting. Mater Sci Eng A 748:205–212. https://doi.org/10.1016/j.msea.2019.01.11010.1016/j.msea.2019.01.110 ↗
24. Sistiaga MLM, Nardone S, Hautfenne C, Van Humbeeck J (2016) Effect of heat treatment of 316L stainless steel produced by Selective Laser Melting (SLM). In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference. Solid Freeform Fabrication, p 558-565, 8–10 July 2016
25. Lou X, Song M, Emigh PW, Othon MA, Andresen PL (2017) On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing. Corros Sci 128:140–153. https://doi.org/10.1016/j.corsci.2017.09.01710.1016/j.corsci.2017.09.017 ↗
26. Kong D, Dong C, Ni X, Zhang L, Yao J, Man C, Cheng X, Xiao K, Li X (2019) Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes. J Mater Sci Technol 35:1499–1507. https://doi.org/10.1016/j.jmst.2019.03.00310.1016/j.jmst.2019.03.003 ↗
27. Jiang R, Mostafaei A, Pauza J, Kantzos C, Rollett AD (2019) Varied heat treatments and properties of laser powder bed printed Inconel 718. Mater Sci Eng A 755:170–180. https://doi.org/10.1016/j.msea.2019.03.10310.1016/j.msea.2019.03.103 ↗
28. Davies SJ, Jeffs SP, Coleman MP, Lancaster RJ (2018) Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy. Mater Des 159:39–46. https://doi.org/10.1016/j.matdes.2018.08.03910.1016/j.matdes.2018.08.039 ↗
29. Yan F, Xiong W, Faierson EJ (2017) Grain structure control of additively manufactured metallic materials. Materials (Basel) 10:1260. https://doi.org/10.3390/ma1011126010.3390/ma10111260 ↗
30. Tian Z, Zhang C, Wang D, Liu W, Fang X, Wellmann D, Zhao Y, Tian Y (2020) A review on laser powder bed fusion of inconel 625 nickel-based alloy. Appl Sci. 10:81. https://doi.org/10.3390/app1001008110.3390/app10010081 ↗
31. Shamsujjoha M, Agnew SR, Fitz-Gerald JM, Moore WR, Newman TA (2018) High strength and ductility of additively manufactured 316L stainless steel explained. Metall Mater Trans A Phys Metall Mater Sci 49:3011–3027. https://doi.org/10.1007/s11661-018-4607-210.1007/s11661-018-4607-2 ↗
32. Fergani O, Bratli Wold A, Berto F, Brotan V, Bambach M (2018) Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting. Fatigue Fract Eng Mater Struct 41:1102–1119. https://doi.org/10.1111/ffe.1275510.1111/ffe.12755 ↗
33. Kempen K, Thijs L, Van Humbeeck J, Kruth JP (2012) Mechanical properties of AlSi10Mg produced by selective laser melting. Phys Procedia 39:439–446. https://doi.org/10.1016/j.phpro.2012.10.05910.1016/j.phpro.2012.10.059 ↗
34. Geenen K, Röttger A, Theisen W (2017) Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting. Mater Corros 68:764–775. https://doi.org/10.1002/maco.20160921010.1002/maco.201609210 ↗
35. Ventura AP, Wade CA, Pawlikowski G, Bayes M, Watanabe M, Misiolek WZ (2016) Mechanical properties and microstructural characterization of Cu-4.3 Pct Sn fabricated by selective laser melting. Metall Mater Trans A Phys Metall Mater Sci. 48:1–10. https://doi.org/10.1007/s11661-016-3779-x10.1007/s11661-016-3779-x ↗
36. Kong D, Ni X, Dong C, Zhang L, Man C, Yao J, Xiao K, Li X (2018) Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells. Electrochim Acta 276:293–303. https://doi.org/10.1016/j.electacta.2018.04.18810.1016/j.electacta.2018.04.188 ↗
37. Fang XY, Li HQ, Wang M, Li C, Guo YB (2018) Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy. Mater Charact 143:182–190. https://doi.org/10.1016/j.matchar.2018.02.00810.1016/j.matchar.2018.02.008 ↗
38. Chlebus E, Gruber K, Kuźnicka B, Kurzac J, Kurzynowski T (2015) Effect of heat treatment on microstructure and mechanical properties of Inconel 718 processed by selective laser melting. Mater Sci Eng A 639:647–655. https://doi.org/10.1016/j.msea.2015.05.03510.1016/j.msea.2015.05.035 ↗
39. Bahl S, Mishra S, Yazar KU, Kola IR, Chatterjee K, Suwas S (2019) Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel. Addit Manuf 28:65–77. https://doi.org/10.1016/j.addma.2019.04.01610.1016/j.addma.2019.04.016 ↗
40. Sun SH, Ishimoto T, Hagihara K, Tsutsumi Y, Hanawa T, Nakano T (2019) Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scr Mater 159:89–93. https://doi.org/10.1016/j.scriptamat.2018.09.01710.1016/j.scriptamat.2018.09.017 ↗
41. Gokcekaya O, Ishimoto T, Hibino S, Yasutomi J, Narushima T, Nakano T (2021) Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy. Acta Mater. 212:116876 https://doi.org/10.1016/j.actamat.2021.11687610.1016/j.actamat.2021.116876 ↗
42. Zeng Q, Gan K, Wang Y (2021) Effect of heat treatment on microstructures and mechanical behaviors of 316L stainless steels synthesized by selective laser melting. J Mater Eng Perform 30:409–422. https://doi.org/10.1007/s11665-020-05330-710.1007/s11665-020-05330-7 ↗
43. Waqar S, Liu J, Sun Q, Guo K, Sun J (2020) Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel. Rapid Prototyp J 26:1739–1749. https://doi.org/10.1108/RPJ-12-2019-032010.1108/RPJ-12-2019-0320 ↗
44. Gao S, Hu Z, Duchamp M, Krishnan PSSR, Tekumalla S, Song X, Seita M (2020) Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting. Acta Mater 200:366–377. https://doi.org/10.1016/j.actamat.2020.09.01510.1016/j.actamat.2020.09.015 ↗
45. Aota LS, Bajaj P, Zilnyk KD, Jägle EA, Ponge D, Sandim HRZ, Raabe D (2021) Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example. Materialia 20:101236. https://doi.org/10.1016/j.mtla.2021.10123610.1016/j.mtla.2021.101236 ↗
46. Ariaseta A, Kobayashi S, Takeyama M, Wang Y, Imano S (2020) Characterization of recrystallization and second-phase particles in solution-treated additively manufactured alloy 718. Metall Mater Trans A Phys Metall Mater Sci 51:973–981. https://doi.org/10.1007/s11661-019-05560-y10.1007/s11661-019-05560-y ↗
47. Pinto FC, Filho IRS, Sandim MJR, Sandim HRZ (2020) Defects in parts manufactured by selective laser melting caused by δ -ferrite in reused 316L steel powder feedstock. Addit Manuf 31:100979. https://doi.org/10.1016/j.addma.2019.10097910.1016/j.addma.2019.100979 ↗
48. Lutterotti L, MAUD, version 2.038, (2006)10.1088/1126-6708/2006/04/038 ↗
49. Lutterotti L, Scardi P (1990) Simultaneous structure and size-strain refinement by the Rietveld method. J Appl Crystallogr 23:246–252. https://doi.org/10.1107/S002188989000238210.1107/S0021889890002382 ↗
50. Popa NC (1998) The (hkl) dependence of diffraction-line broadening caused by strain and size for all Laue groups in Rietveld refinement. J Appl Crystallogr 31:176–180. https://doi.org/10.1107/S002188989700979510.1107/S0021889897009795 ↗
51. Prince E (1993) The Rietveld method. Oxford University Press, Oxford, UK
52. Sahu P, De M, Kajiwara S (2002) Microstructural characterization of stress-induced martensites evolved at low temperature in deformed powders of Fe–Mn–C alloys by the Rietveld method. J Alloys Compd 346:158–169. https://doi.org/10.1016/S0925-8388(02)00495-410.1016/S0925-8388(02)00495-4 ↗
53. Williamson GK, Smallman RE III (1956) Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye-Scherrer spectrum. Philos Mag 1:34–46. https://doi.org/10.1080/1478643560823807410.1080/14786435608238074 ↗
54. Deng P, Karadge M, Rebak RB, Gupta VK, Prorok BC, Lou X (2020) The origin and formation of oxygen inclusions in austenitic stainless steels manufactured by laser powder bed fusion. Addit Manuf 35:101334. https://doi.org/10.1016/j.addma.2020.10133410.1016/j.addma.2020.101334 ↗
55. Munitz A, Venkert A, Landau P, Kaufman MJ, Abbaschian R (2012) Microstructure and phase selection in supercooled copper alloys exhibiting metastable liquid miscibility gaps. J Mater Sci 47:7955–7970. https://doi.org/10.1007/s10853-012-6354-x10.1007/s10853-012-6354-x ↗
56. Saeidi K, Gao X, Zhong Y, Shen ZJ (2015) Hardened austenite steel with columnar sub-grain structure formed by laser melting. Mater Sci Eng A 625:221–229. https://doi.org/10.1016/j.msea.2014.12.01810.1016/j.msea.2014.12.018 ↗
57. Riabov D, Rashidi M, Hryha E, Bengtsson S (2020) Effect of the powder feedstock on the oxide dispersion strengthening of 316L stainless steel produced by laser powder bed fusion. Mater Charact 169:110582. https://doi.org/10.1016/j.matchar.2020.11058210.1016/j.matchar.2020.110582 ↗
58. Luo SB, Wang WL, Chang J, Xia ZC, Wei B (2014) A comparative study of dendritic growth within undercooled liquid pure Fe and Fe50Cu50 alloy. Acta Mater 69:355–364. https://doi.org/10.1016/j.actamat.2013.12.00910.1016/j.actamat.2013.12.009 ↗
59. Sun WP, Militzer M, Jonas JJ (1992) Diffusion-controlled growth and coarsening of MnS during hot deformation. Metall Mater Trans A 23A:3013–3023. https://doi.org/10.1007/BF0264611910.1007/BF02646119 ↗
60. Sun Z, Tan X, Tor SB, Yeong WY (2016) Selective laser melting of stainless steel 316L with low porosity and high build rates. Mater Des 104:197–204. https://doi.org/10.1016/j.matdes.2016.05.03510.1016/j.matdes.2016.05.035 ↗
61. Zhong Y, Liu L, Wikman S, Cui D, Shen Z (2016) Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting. J Nucl Mater 470:170–178. https://doi.org/10.1016/j.jnucmat.2015.12.03410.1016/j.jnucmat.2015.12.034 ↗
62. Chao Q, Cruz V, Thomas S, Birbilis N, Collins P, Taylor A, Hodgson PD, Fabijanic D (2017) On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel. Scr Mater 141:94–98. https://doi.org/10.1016/j.scriptamat.2017.07.03710.1016/j.scriptamat.2017.07.037 ↗
63. Vrancken B, Thijs L, Kruth J-P, Van Humbeeck J (2012) Heat treatment of Ti6Al4V produced by Selective Laser Melting: microstructure and mechanical properties. J Alloys Compd 541:177–185. https://doi.org/10.1016/j.jallcom.2012.07.02210.1016/j.jallcom.2012.07.022 ↗
64. Yu H, Yang J, Yin J, Wang Z, Zeng X (2017) Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel. Mater Sci Eng A 695:92–100. https://doi.org/10.1016/j.msea.2017.04.03110.1016/j.msea.2017.04.031 ↗
65. Kunze K, Etter T, Grässlin J, Shklover V (2014) Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM). Mater Sci Eng A 620:213–222. https://doi.org/10.1016/j.msea.2014.10.00310.1016/j.msea.2014.10.003 ↗
66. Casati R, Lemke J, Vedani M (2016) Microstructure and fracture Behavior of 316L austenitic stainless steel produced by selective laser melting. J Mater Sci Technol 32:738–744. https://doi.org/10.1016/j.jmst.2016.06.01610.1016/j.jmst.2016.06.016 ↗
67. Pourbabak S, Montero-Sistiaga ML, Schryvers D, Van Humbeeck J, Vanmeensel K (2019) Microscopic investigation of as built and hot isostatic pressed Hastelloy X processed by Selective Laser Melting. Mater Charact 153:366–371. https://doi.org/10.1016/j.matchar.2019.05.02410.1016/j.matchar.2019.05.024 ↗
68. Liu Y, Zhang J, Pang Z (2018) Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel. Opt Laser Technol 98:23–32. https://doi.org/10.1016/j.optlastec.2017.07.03410.1016/j.optlastec.2017.07.034 ↗
69. Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva FS, Miranda G (2017) 316L stainless steel mechanical and tribological behavior—A comparison between selective laser melting, hot pressing and conventional casting. Addit Manuf 16:81–89. https://doi.org/10.1016/j.addma.2017.05.00710.1016/j.addma.2017.05.007 ↗
70. Gorsse S, Hutchinson C, Gouné M, Banerjee R (2017) Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Sci Technol Adv Mater 18:584–610. https://doi.org/10.1080/14686996.2017.136130510.1080/14686996.2017.1361305 ↗
71. Wright SI, Nowell MM, Field DP (2011) A review of strain analysis using electron backscatter diffraction. Microsc Microanal 17:316–329. https://doi.org/10.1017/S143192761100005510.1017/S1431927611000055 ↗
72. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena. Elsevier Ltd. https://doi.org/10.1017/CBO9781107415324.00410.1017/CBO9781107415324.004 ↗
73. Krog-Pedersen S, Bowen JR, Pantleon W (2009) Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation. Int J Mater Res 100:433–438. https://doi.org/10.3139/146.11003210.3139/146.110032 ↗
74. Field DP, Bradford LT, Nowell MM, Lillo TM (2007) The role of annealing twins during recrystallization of Cu. Acta Mater 55:4233–4241. https://doi.org/10.1016/j.actamat.2007.03.02110.1016/j.actamat.2007.03.021 ↗
75. Xu W, Quadir MZ, Ferry M (2009) A high-resolution three-dimensional electron backscatter diffraction study of the nucleation of recrystallization in cold-rolled extra-low-carbon steel. Metall Mater Trans A Phys Metall Mater Sci 40:1547–1556. https://doi.org/10.1007/s11661-009-9873-610.1007/s11661-009-9873-6 ↗
76. Miller VM, Johnson AE, Torbet CJ, Pollock TM (2016) Recrystallization and the development of abnormally large grains after small strain deformation in a polycrystalline nickel-based superalloy. Metall Mater Trans A Phys Metall Mater Sci 47:1566–1574. https://doi.org/10.1007/s11661-016-3329-610.1007/s11661-016-3329-6 ↗
77. Woo W, Jeong JS, Kim D, Lee CM, Choi S, Suh J, Lee SY, Harjo S (2020) Stacking fault energy analyses of additively manufactured stainless steel 316L and CrCoNi medium entropy alloy using in situ neutron diffraction. Sci Rep. 10:1350. https://doi.org/10.1038/s41598-020-58273-310.1038/s41598-020-58273-3 ↗
78. Choi JP, Shin GH, Brochu M, Kim YJ, Yang SS, Kim KT, Yang DY, Lee CW, Yu JH (2016) Densification behavior of 316L stainless steel parts fabricated by selective laser melting by variation in laser energy density. Mater Trans 57:1952–1959. https://doi.org/10.2320/matertrans.M201628410.2320/matertrans.M2016284 ↗
79. Michiuchi M, Kokawa H, Wang ZJ, Sato YS, Sakai K (2006) Twin-induced grain boundary engineering for 316 austenitic stainless steel. Acta Mater 54:5179–5184. https://doi.org/10.1016/j.actamat.2006.06.03010.1016/j.actamat.2006.06.030 ↗
80. Tomota Y, Ojima M, Harjo S, Gong W, Sato S, Ungár T (2019) Dislocation densities and intergranular stresses of plastically deformed austenitic steels. Mater Sci Eng A 743:32–39. https://doi.org/10.1016/j.msea.2018.09.05210.1016/j.msea.2018.09.052 ↗
81. Aota LS, Bajaj P, Zilnyk KD, Ponge D, Sandim HRZ (2021) The origin of abnormal grain growth upon thermomechanical processing of laser powder-bed fusion alloys. Materialia 20:101243. https://doi.org/10.1016/j.mtla.2021.10124310.1016/j.mtla.2021.101243 ↗
82. Haessner F (1978) Recrystallization of metallic materials. Riederer-Verlag GmbH, Stuttgart
83. Garlea E, Choo H, Sluss CC, Koehler MR, Bridges RL, Xiao X, Ren Y, Jared BH (2019) Variation of elastic mechanical properties with texture, porosity, and defect characteristics in laser powder bed fusion 316L stainless steel. Mater Sci Eng A 763:138032. https://doi.org/10.1016/j.msea.2019.13803210.1016/j.msea.2019.138032 ↗
84. Manohar PA, Ferry M, Chandra T (1998) Five decades of the Zener equation. ISIJ Int 38:913–924. https://doi.org/10.2355/isijinternational.38.91310.2355/isijinternational.38.913 ↗
85. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Elsevier, Pittsburgh
86. Varin RA (1984) Grain boundary diffusion and free energy during the recrystallization of type 316 stainless steel. Mater Sci Eng 66:97–105. https://doi.org/10.1016/0025-5416(84)90144-710.1016/0025-5416(84)90144-7 ↗
87. Martin JW, Doherty RD, Cantor B (1997) Stability of microstructure in metallic systems. Cambridge University Press, Cambridge10.1017/CBO9780511623134 ↗
88. Herzig C, Mishin Y (2005) Grain boundary diffusion in metals. In: Heitjans P, Kärger J (eds) Diffus Condens Matter Methods Mater Model. Springer, Berlin
89. Kirchner HOK (1971) Coarsening of grain-boundary precipitates. Metall Trans 2:2861–2864. https://doi.org/10.1007/BF0281326410.1007/BF02813264 ↗
90. Hemmasian Ettefagh A, Guo S (2018) Electrochemical behavior of AISI316L stainless steel parts produced by laser-based powder bed fusion process and the effect of post annealing process. Addit Manuf 22:153–156. https://doi.org/10.1016/j.addma.2018.05.01410.1016/j.addma.2018.05.014 ↗
91. Wei HL, Mazumder J, DebRoy T (2015) Evolution of solidification texture during additive manufacturing. Sci Rep 5:16446. https://doi.org/10.1038/srep1644610.1038/srep16446 ↗
92. Choo H, Sham KL, Bohling J, Ngo A, Xiao X, Ren Y, Depond PJ, Matthews MJ, Garlea E (2019) Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. Mater Des 164:107534. https://doi.org/10.1016/j.matdes.2018.12.00610.1016/j.matdes.2018.12.006 ↗
93. Pham MS, Dovgyy B, Hooper PA, Gourlay CM, Piglione A (2020) The role of side-branching in microstructure development in laser powder-bed fusion. Nat Commun 11:1–12. https://doi.org/10.1038/s41467-020-14453-310.1038/s41467-020-14453-3 ↗
94. Chowdhury SG, Das S, Ravikumar B, De PK (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metall Mater Trans A Phys Metall Mater Sci 37:2349–2359. https://doi.org/10.1007/BF0258620910.1007/BF02586209 ↗
95. Liu Y, Militzer M, Perez M (2019) Phase field modelling of abnormal grain growth. Materials (Basel) 12:4048–406810.3390/ma12244048 ↗
96. Huang W, Yuan S, Chai L, Jiang L, Liu H, Wang F, Wang D, Wang J (2019) Development of grain boundary character distribution in medium-strained 316L stainless steel during annealing. Met Mater Int 25:364–371. https://doi.org/10.1007/s12540-018-0203-710.1007/s12540-018-0203-7 ↗