Interface formation and bonding mechanisms of hot-rolled stainless steel clad plate
Source abstract
Abstract
Since the 1980s, vacuum hot rolling has been developed to fabricate the stainless steel clad plates by the Iron and Steel Institute of Japan. Herein, hot rolling is a widely used solid-state bonding process to join the carbon steel substrate and stainless steel cladding. In this paper, we provide a brief overview of the vacuum hot rolling process and effective parameters on the interface characteristics and shear strength of stainless steel clad plate. The effects of surface preparation condition, atmosphere condition, vacuum degree, rolling temperature, rolling reduction ratio, interlayer, heat treatment on the microstructure, interface characteristics and mechanical properties of stainless steel clad plate have been analyzed in detail. It is shown that the interface transition zone is formed due to the carbon diffusion, and the strong interface bonding is attributed to the sufficient alloy elements diffusion of Fe, Cr and Ni. Moreover, the interface shear strength and toughness are also affected by interfacial precipitation phase and multiple oxides. Finally, the present work concluded the bonding mechanism of hot-rolled stainless steel clad based on the oxide film theory, diffusion theory, recrystallization theory and three stage theory.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Smith L (2012) Engineering with clad steel. Nickel Institute Technical Series, Beijing, pp 1–23
2. Liu BX, Yin FX, Dai XL, He JN, Fang W, Chen CX, Dong YC (2017) The tensile behaviors and fracture characteristics of stainless steel clad plates with different interfacial status. Mater Sci Eng, A 679:172–18210.1016/j.msea.2016.10.033 ↗
3. Song H, Shin H, Shin Y (2016) Heat treatment of clad steel plate for application of hull structure. Ocean Eng 122:278–28710.1016/j.oceaneng.2016.06.042 ↗
4. Zhu ZC, He Y, Zhang XJ, Liu HY, Li X (2016) Effect of interface oxides on shear properties of hot-rolled stainless steel clad plate. Mater Sci Eng, A 669:344–34910.1016/j.msea.2016.05.066 ↗
5. Fang J, Li YZ (2012) Process optimization for welding stainless steel clad material based on orthotropic bridge plates. Appl Mech Mater 178–181:2066–206910.4028/www.scientific.net/AMM.178-181.2066 ↗
6. Miki C, Homma K, Tominaga T (2002) High strength and high performance steels and their use in bridge structure. J Constr Steel Res 58:3–2010.1016/S0143-974X(01)00028-1 ↗
7. Su H, Luo XB, Chai F, Shen JC, Sun XJ, Lu F (2015) Manufacturing technology and application trends of titanium clad steel plates. J Iron Steel Res Int 22:977–98210.1016/S1006-706X(15)30099-6 ↗
8. Ye Y, Zhang SJ, Han LH, Liu Y (2018) Square concrete-filled stainless steel/carbon steel bimetallic tubular stub columns under axial compression. J Constr Steel Res 146:49–6210.1016/j.jcsr.2018.03.015 ↗
9. Marques MJ, Ramasamy A, Batusta AC, Nobre JP, Loureiro A (2015) Effect of heat treatment on microstrucutre and residual stress fields of a weld multilayer austenitic steel clad. J Mater Process Technol 222:52–6010.1016/j.jmatprotec.2015.03.004 ↗
10. Zhang LJ, Pei Q, Zhang JX, Bi ZY, Li PC (2014) Study on the microstructure and mechanical properties of explosive welded 2205/x65 bimetallic sheet. Mater Des 64:462–47610.1016/j.matdes.2014.08.013 ↗
11. Mendes R, Ribeiro JB, Loureiro A (2013) Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration. Mater Des 51:182–19210.1016/j.matdes.2013.03.069 ↗
12. Satya Prasad VV, Madhusudhan Reddy G (2012) Microstructure and mechanical properties of electroslag strip and explosively clad low alloy steel: stainless steel joints. Trans Indian Inst Met 65:135–14310.1007/s12666-012-0124-y ↗
13. Yazdani M, Toroghinejad MR, Hashemi SM (2016) Effects of heat treatment on interface microstructure and mechanical properties of explosively welded Ck60/St37 plates. J Mater Eng Perform 25:5330–534210.1007/s11665-016-2399-3 ↗
14. Niederhauser S, Karlsson B (2003) Mechanical properties of laser cladded steel. Mater Sci Technol 19:1611–161610.1179/026708303225008103 ↗
15. Pongmorakot K, Nambu S, Koseki T (2018) Effects of compressive strain on the evolution of interfacial strength of steel/nickel solid-state bonding at low temperature. Sci Technol Weld Join 23:344–35010.1080/13621718.2017.1391935 ↗
16. Pongmorakot K, Nambu S, Shibuta Y, Koseki T (2017) Investigation on the mechanism of steel/steel solid-state bonding at low temperatures. Sci Technol Weld Join 22:257–26310.1080/13621718.2016.1222237 ↗
17. Xu W, Sun X (2016) Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals. Sci Technol Weld Join 21:592–59910.1179/1362171815Y.0000000092 ↗
18. Chen KK, Zhang YS, Wang HZ (2017) Study of plastic deformation and interface friction process for ultrasonic welding. Sci Technol Weld Join 22:208–21610.1080/13621718.2016.1218601 ↗
19. Tanaka T, Fukuchi Y (1983) Fatigue crack propagation behavior of two-layered low carbon steel-stainless steel composite plates. Bull JSME 26:1273–128010.1299/jsme1958.26.1273 ↗
20. Honda K, Torii T (1981) Study on fatigue fracture of laminated inhomogeneous metals (in quenched clad plates of low carbon steel and middle carbon steel). Bull JSME 24:468–47410.1299/jsme1958.24.468 ↗
21. Wang S, Liu BX, Chen CX, Feng JH, Yin FX (2018) Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios. J Alloy Compd 766:517–52610.1016/j.jallcom.2018.06.109 ↗
22. Xie GM, Luo ZG, Wang GL, Li L, Wang GD (2011) Interface characteristic and properties of stainless steel/HSLA steel clad plate by vacuum rolling cladding. Mater Trans 52:1709–171210.2320/matertrans.M2011127 ↗
23. Li L, Yin FX, Nagai K (2011) Progress of laminated materials and clad steels production. Mater Sci Forum 675–677:439–44710.4028/www.scientific.net/MSF.675-677.439 ↗
24. Tachibana S, Koronuma Y, Yokota T, Yamada K, Moriya Y, Kami C (2015) Effect of hot rolling and cooling conditions on intergranular corrosion behavior in alloy625 clad steel. Corros Sci 99:125–13310.1016/j.corsci.2015.06.028 ↗
25. Li L, Nagai K, Yin FX (2008) Progress in cold roll bonding of metals. Sci Technol Adv Mater 9:1–11
26. Chen CX, Liu MY, Liu BX, Yin FX, Dong YC, Zhang X, Zhang FY, Zhang YG (2017) Tensile shear sample design and interfacial shear strength of stainless steel clad plate. Fusion Eng Des 125:431–44110.1016/j.fusengdes.2017.05.136 ↗
27. Bouaziz O, Masse JP, Petitgand G, Huang MX (2016) A novel strong and ductile TWIP/Martensite steel composite. Adv Eng Mater 18:56–5910.1002/adem.201500113 ↗
28. Jiang WC, Xu XP, Gong JM, Tu ST (2012) Influence of repair length on residual stress in the repair weld of a clad plate. Nucl Eng Des 246:211–21910.1016/j.nucengdes.2012.01.021 ↗
29. Jiang F, Deng ZL, Zhao K, Sun J (2003) Fatigue crack propagation normal to a plasticity mismatched biomaterial interface. Mater Sci Eng, A 356:258–26610.1016/S0921-5093(03)00142-4 ↗
30. Nambu S, Michiuchi M, Inoue J, Koseki T (2009) Effect of interfacial bonding strength on the tensile ductility of multilayered steel composites. Compos Sci Technol 69:1936–194110.1016/j.compscitech.2009.04.013 ↗
31. Missori S, Murdolo F, Sili A (2004) Single-pass laser beam welding of clad steel plate. Weld J 83:65–71
32. Dhib Z, Guermazi N, Gasperini M, Haddar N (2016) Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: microstructure and mechanical properties before and after welding. Mater Sci Eng, A 656:130–14110.1016/j.msea.2015.12.088 ↗
33. Rees DWA, Power RK (1994) Forming limits in a clad steel. J Mater Process Technol 45:571–57510.1016/0924-0136(94)90400-6 ↗
34. Li HB, Chen J, Yang J (2013) Experiment and numerical simulation on delamination during the laminated steel sheet forming processes. Int J Adv Manuf Technol 68:641–64910.1007/s00170-013-4785-4 ↗
35. Dhib Z, Guermazi N, Ktari A, Gasperini M, Haddar N (2017) Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates. Mater Sci Eng, A 696:374–38610.1016/j.msea.2017.04.080 ↗
36. Atrian A, Fereshteh-Saniee F (2013) Deep drawing process of steel/brass laminated sheets. Compos Part B 47:75–8110.1016/j.compositesb.2012.10.023 ↗
37. Liu BX, Huang LJ, Geng L, Wang B, Cui XP, Liu C, Wang GS (2013) Microstructure and tensile behavior of novel laminated Ti–TiBw/Ti composites by reaction hot pressing. Mater Sci Eng, A 583:182–18710.1016/j.msea.2013.06.058 ↗
38. Liu BX, Huang LJ, Kaveendran B, Geng L, Cui XP, Wei SL, Yin FX (2017) Tensile and bending behaviors and characteristics of laminated Ti–(TiBw/Ti) composites with different interface status. Compos B 108:377–38510.1016/j.compositesb.2016.10.001 ↗
39. Liu BX, Huang LJ, Geng L, Wang B, Liu C, Zhang WC (2014) Fabrication and superior of laminated Ti–TiBw/Ti composites by diffusion welding. J Alloy Compd 602:187–19210.1016/j.jallcom.2014.02.140 ↗
40. Kum DW, Oyama T, Wadsworth J, Sherby OD (1983) The impact properties of laminated composites containing ultrahigh carbon (UHC) steels. J Mech Phys Solids 31:173–18610.1016/0022-5096(83)90049-2 ↗
41. Liu BX, Huang LJ, Rong XD, Geng L, Yin FX (2016) Bending behaviors and fracture characteristics of laminated ductile-tough composites under different modes. Compos Sci Technol 126:94–10510.1016/j.compscitech.2016.02.011 ↗
42. Cepeda-Jiménez CM, Lutfullin RY, Ruano OA (2013) Effect of processing temperature on the texture and shear mechanical properties of diffusion bonded Ti–6Al–4V multilayer laminates. Metall Mater Trans A 44:4743–475310.1007/s11661-013-1811-y ↗
43. Liu BX, Wang S, Ma JL, Yin FX, Feng JH, Chen CX (2018) Microstructure and mechanical properties of hot-rolled stainless steel clad plates by heat treatment. Mater Chem Phys 216:460–46710.1016/j.matchemphys.2018.06.033 ↗
44. Jing Y, Qin Y, Zang XM, Shang QY, Song H (2014) A novel reduction-bonding process to fabricate stainless steel clad plate. J Alloy Compd 617:688–69810.1016/j.jallcom.2014.07.186 ↗
45. Jing Y, Qin Y, Zang XM, Li YH (2014) The bonding properties and interfacial morphologies of clad plate prepared by multiple passes hot rolling in a protective atmosphere. J Mater Process Technol 214:1686–169510.1016/j.jmatprotec.2014.03.019 ↗
46. Madaah-Hosseini HR, Kokabi AH (2002) Cold roll bonding of 5754-aluminum strips. Mater Sci Eng, A 335:186–19010.1016/S0921-5093(01)01925-6 ↗
47. Li L, Zhang XJ, Zhu ZC, Liu HY (2014) Investigation on bonding of stainless steel clad plate by vacuum hot rolling. J Mater Metall 13:46–50 (in Chinese)
48. Mehr VY, Toroghinejad MR, Rezaeian A (2014) The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding process. Mater Des 53:174–18110.1016/j.matdes.2013.06.028 ↗
49. Zhang XJ, Li L, Liu HY, Yin FX (2013) Application of insert layer in manufacturing clad metal plates. Steel Roll 30:45–49 (in Chinese)
50. Jamaati R, Toroghinejad MR (2011) The role of surface preparation parameters on cold roll bonding of aluminum strips. J Mater Eng Perform 20:192–197
51. Wu HY, Lee S, Wang JY (1998) Solid-state bonding of iron-based alloys, steel–brass, and aluminum alloys. J Mater Process Technol 75:173–17910.1016/S0924-0136(97)00323-3 ↗
52. Jamaati R, Toroghinejad MR (2011) Cold roll bonding bond strengths: review. Mater Sci Technol 27:1101–110810.1179/026708310X12815992418256 ↗
53. Wu ZJ, Peng WF, Shu XD (2017) Influence of rolling temperature on interface properties of the cross wedge rolling of 42CrMo/Q235 laminated shaft. Int J Adv Manuf Technol 91:517–52610.1007/s00170-016-9734-6 ↗
54. Li L, Zhang XJ, Liu HY, Yin FX (2013) Formation mechanism of oxide inclusion on the interface of hot-rolled stainless steel clad plates. J Iron Steel Res 25:43–47 (in Chinese)
55. Masahiro N, Ikuro H, Shinji K (2006) Effects of surface oxides on the phospatability of the high strength cold rolled steel. Tetsu Hagane 92:378–384 (in Japanese)10.2355/tetsutohagane1955.92.6_378 ↗
56. Wang GL (2013) Research on interface inclusions’ evolution mechanism and process control of vacuum hot roll-cladding. Doctor thesis of Northeastern University, 1–162. (in Chinese)
57. Liu BX, Wang S, Chen CX, Fang W, Yin FX (2019) Interface characteristics and fracture behavior of hot rolled stainless steel clad plates with different vacuum degrees. Appl Surf Sci 463:121–13110.1016/j.apsusc.2018.08.221 ↗
58. Qin Q, Wu ZH, Zang Y, Guan B, Zhang FX (2016) Warping deformation of 316l/Q345r stainless composite plate after removal strake. World J Eng 13:206–20910.1108/WJE-06-2016-027 ↗
59. Qin Q, Zhang DT, Zang Y, Guan B (2015) A simulation study on the multi-pass rolling bond of 316L/Q345R stainless clad plate. Adv Mech Eng 7:1–13
60. Tong JG, Chen R, Bao WP, Yan K, Ren XP (2009) Composite rolling of three-layer iron-based metals of 25CrMoA steel/micro-alloyed steel/A235 steel. J Univ Sci Technol Beijing 31:186–192 (in Chinese)
61. Jin JB (2013) Research of cladding rate and shear strength for hot rolled stainless steel clad plate. Wide Heavy Plate 19:12–15 (in Chinese)
62. Kolarik L, Janovec J, Kolarikova M, Nachtnebl P (2015) Influence of diffusion welding time on homogenous steel joints. Proc Eng 100:1678–168510.1016/j.proeng.2015.01.543 ↗
63. He JY, Ma Y, Yan DS, Jiao SH, Yuan FP, Wu XL (2018) Improving ductility by increasing fraction of interfacial zone in low C steel/304SS laminates. Mater Sci Eng, A 726:288–29710.1016/j.msea.2018.04.102 ↗
64. Zhang LJ, He Y, Liu HY, Zhang XJ, Liu BL (2016) Effect of induction heating on carbon steel layer in stainless steel clad plates. CFHI Technol 171:52–56 (in Chinese)
65. Li L, Zhu ZC, Zhang XJ, Liu HY (2015) Experimental study on hot rolled stainless steel clad plate produced by TMCP. J Mater Eng 43:62–67 (in Chinese)10.1016/j.msea.2015.01.015 ↗
66. Motarjemi AK, Kocak M, Ventzke V (2002) Mechanical and fracture characterization of a bi-material steel plate. Int J Press Vessel Pip 79:181–19110.1016/S0308-0161(02)00012-1 ↗
67. Hedayati O, Korei N, Adeli M, Etminanbakhsh M (2017) Microstructural evolution and interfacial diffusion during heat treatment of hastelloy/stainless steel bimetals. J Alloy Compd 712:172–17810.1016/j.jallcom.2017.04.080 ↗
68. Rajeev R, Samajdar I, Raman R, Harendranath CS, Kale GB (2001) Origin of hard and soft zone formation during cladding of austenitic/duplex stainless steel on plain carbon steel. Mater Sci Technol 17:1005–101010.1179/026708301101510852 ↗
69. Ayer R, Mueller RR, Leta DP, Sisak WJ (1989) Phase transformations at steel/in625 clad interfaces. Metall Trans A 20:665–68110.1007/BF02667584 ↗
70. Pavlovsky J, Million B, Ciha K, Stransky K (1991) Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of nuclear reactor. Mater Sci Eng, A 149:105–11010.1016/0921-5093(91)90791-K ↗
71. Mas F, Tassin C, Valle N, Robaut F, Charlot F, Yescas M, Roch F, Todeschini P, Brechet Y (2016) Metallurgical characterization of coupled carbon diffusion and precipitation in dissimilar steel welds. J Mater Sci 51:4846–4879. https://doi.org/10.1007/s10853-016-9792-z10.1007/s10853-016-9792-z ↗
72. Li L, Zhang XJ, Liu G, Fu HY, Li MN (2015) Effect of Ni layer thickness on bonding strength of hot rolled clad steel plate. Trans Mater Heat Treat 36:80–85
73. Luo ZA, Wang GL, Xie GM (2013) Interfacial microstructure and properties of a vacuum hot roll bonded titanium stainless steel clad plate with a niobium interlayer. Acta Metall Sin 26:754–76010.1007/s40195-013-0283-9 ↗
74. Pozuelo M, Carreno F, Carsi M, Ruano OA (2007) Influence of interfaces on the mechanical properties of ultrahigh carbon steel multilayer laminates. Int J Mat Res 98:47–5210.3139/146.101431 ↗
75. Syn CK, Lesuer DR, Wolfenstine J, Sherby OD (1993) Layer thickness effect on ductile tensile fracture of ultrahigh carbon steel–brass laminates. Metall Trans A 24:1647–165310.1007/BF02646603 ↗
76. Liang F, Tan HF, Zhang B, Zhang GP (2017) Maximizing necking-delayed fracture of sandwich-structured Ni/Cu/Ni composites. Scr Mater 134:28–3210.1016/j.scriptamat.2017.02.032 ↗
77. Liu HS, Zhang B, Zhang GP (2011) Delaying premature local necking of high strength Cu: a potential way to enhance plasticity. Scr Mater 64:13–1610.1016/j.scriptamat.2010.08.049 ↗
78. Tan HF, Zhang B, Kang YK, Zhu XF, Zhang GP (2016) Fracture behavior of sandwich-structured metal/amorphous alloy/metal composites. Mater Des 90:60–6510.1016/j.matdes.2015.10.107 ↗
79. Park J, Kim JS, Kang MJ, Sohn SS, Cho WT, Kim HS, Lee S (2017) Tensile property improvement of TWIP-cored three layer steel sheets fabricated by hot roll bonding with low carbon steel or interstitial free steel. Sci Rep 7:4023110.1038/srep40231 ↗
80. Serror MH (2013) Analytical study for deformability of laminated sheet metal. J Adv Res 4:83–9210.1016/j.jare.2012.01.007 ↗
81. Guo X, Weng GJ, Soh AK (2012) Ductility enhancement of layered stainless steel with nanograined interface layers. Comput Mater Sci 55:350–35510.1016/j.commatsci.2011.11.014 ↗
82. Pommier H, Busso EP, Morgeneyer TF, Pineau A (2016) Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: effect of carbon, nitrogen and phosphorus. Acta Mater 103:893–90810.1016/j.actamat.2015.11.004 ↗
83. Jones R, Randle V, Owen G (2008) Carbide precipitation and grain boundary plane selection in overaged type 316 austenitic stainless steel. Mater Sci Eng, A 496:256–26110.1016/j.msea.2008.05.028 ↗
84. Sun GS, Du LX, Hu J, Xie H, Wu HY, Misra RDK (2015) Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Mater Charact 110:228–23510.1016/j.matchar.2015.11.001 ↗
85. Avramovic-Cingara G, Ososkov Y, Jain MK, Wilkinson DS (2009) Effect of martensite distribution on damage behavior in DP600 dual phase steels. Mater Sci Eng, A 516:7–1610.1016/j.msea.2009.03.055 ↗
86. Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nanocrystalline structure in 301 stainless steel produced by martensite treatment. Metall Mater Trans A 40:2241–224910.1007/s11661-009-9916-z ↗
87. Eskandari M, Kermanpur A, Najafizadeh A (2009) Formation of nano-grained structure in a 301 stainless steel using a repetitive thermo-mechanical treatment. Mater Lett 63:1442–144410.1016/j.matlet.2009.03.043 ↗
88. Bowden EP, Tabor D (1939) The area of contact between stationary and between moving surfaces. Proc R Soc Lond A 169:391–41310.1098/rspa.1939.0005 ↗
89. Burton MS (1954) Metallurgical principles of metal bonding. Weld J 33:1051–1057
90. Cave JA, Williams JD (1973) The mechanism of cold pressure welding by rolling. J Inst Met 101:203–207
91. Derby B, Wallach ER (1984) Diffusion bonding: development of theoretical model. Mater Sci 18:427–431
92. Mitani Y, Vargas R, Zavala M (1984) Deformation and diffusion bonding of aluminide-coated steels. Thin Solid Films 111:37–4210.1016/0040-6090(84)90346-8 ↗
93. Brown DW, Okuniewski MA, Sisneros TA, Clausen B, Moore GA, Balogh L (2016) Neutron diffraction measurement of residual stresses, dislocation density and texture in Zr-bonded U-10Mo “mini” fuel foils and plates. J Nucl Mater 482:63–7410.1016/j.jnucmat.2016.09.022 ↗
94. Pan D, Gao K, Yu J (1989) Cold roll bonding of bimetallic sheets and strips. Mater Sci Technol 5:934–93910.1179/mst.1989.5.9.934 ↗
95. Shirzadi AA, Assadi H, Wallach ER (2001) Interface evolution and bond strength when diffusion bonding materials with stable oxide films. Surf Interface Anal 31:609–61810.1002/sia.1088 ↗
96. Parks JM (1953) Recrystallization in welding. Weld J Suppl 32:209–222
97. Barabash RI, Barabash OM, Ojima M, Yu ZZ, Inoue J, Nambu S, Koseki T, Xu RQ, Feng ZL (2014) Interphase strain gradients in multilayered steel composite from microdiffraction. Metall Mater Trans A 45:98–10810.1007/s11661-013-2100-5 ↗
98. Min XH, Emura S, Meng FQ, Mi GB, Tsuchiya K (2015) Mechanical twinning and dislocation slip multilayered deformation microstructures in β-type Ti–Mo base alloy. Scr Mater 102:79–8210.1016/j.scriptamat.2015.02.018 ↗
99. Bay N (1979) Cold pressure welding-the mechanisms governing bonding. J Eng Ind 101:122–127
100. Bay N (1983) Mechanisms producing metallic bonds in cold welding. Weld Res Suppl 5:137–142