Adsorption behaviors of cationic and anionic dyes from aqueous solution on nanocomposite polypyrrole/SBA-15
Source abstract
Abstract
The present research focuses on the synthesis and the modification of mesoporous silica SBA-15 using in situ polymerization of pyrrole. The structural/textural and morphological features of adsorbents were investigated through X-ray diffraction, nitrogen sorption at 77 K, thermogravimetric analysis, Fourier transform infrared spectroscopy, zeta potential measurements and scanning electronic microscopy. Several nanocomposites containing different percentages of polypyrrole were tested for the adsorption of both anionic and cationic dyes. The effect of adsorbent nature, pH, contact time, adsorbent dose and initial dye concentration were investigated and discussed in terms of adsorption efficiency. The adsorption efficiency of MO dye increased in the following sequence: SBA-15 < PPy/SBA-15(1%) < PPy/SBA-15(10%) < PPy/SBA-15(30%) < PPy/SBA-15(50%). The adsorption of MB dye is preferably carried out by parent material SBA-15 and nanocomposite PPy/SBA-15(1%). The experimental data were verified by the Langmuir and Freundlich isotherms, and the kinetic data were fitted by pseudo-first-order and pseudo-second-order models. The obtained results showed that the adsorption of the both dye by nanocomposite PPy/SBA-15 followed Langmuir adsorption isotherm models and pseudo-second-order kinetics. The adsorbed amounts recorded for MO and MB dyes are 41.66 and 58.82 mg/g, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Adsorption and biosorption for pollutant removal · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Jiao J, Wang J, Li M, Li J, Li Q, Quan Q, Chen J (2016) Simultaneous determination of three azo dyes in food product by ion mobility spectrometry. J Chromatogr B 1025:105–10910.1016/j.jchromb.2016.05.002 ↗
2. Zhu J, Deng C, Jiang H, Zheng Z, Gong R, Bi Y, Zhang L, Lin R (2016) The impact of fluorescent dyes on the performances of polystyrene-based plastic scintillators. Nucl Instrum Methods Phys Res Sect A 835:136–14110.1016/j.nima.2016.08.018 ↗
3. Burnier P, Niddam J, Bosc R, Hersant B, Meningaud JP (2017) Indocyanine green applications in plastic surgery: a review of the literature. J Plast Reconstr Aesthet Surg 70:814–82710.1016/j.bjps.2017.01.020 ↗
4. Shindy HA (2017) Fundamentals in the chemistry of cyanine dyes: a review. Dyes Pigment 145:505–51310.1016/j.dyepig.2017.06.029 ↗
5. Ritter EE, Dickinson ME, Harron JP, Lunderberg DM, DeYoung PA, Robel AE, Field JA, Peaslee GF (2017) PIGE as a screening tool for Per- and polyfluorinated substances in papers and textiles. Nucl Instrum Methods Phys Res Sect B 407:47–5410.1016/j.nimb.2017.05.052 ↗
6. Guin JP, Bhardwaj YK, Varshney L (2017) Mineralization and biodegradability enhancement of methyl orange dye by an effective advanced oxidation process. Appl Radiat Isot 122:153–15710.1016/j.apradiso.2017.01.018 ↗
7. Larouk S, Ouargli R, Shahidi D, Olhund L, Shiao TC, Chergui N, Sehili T, Roy R, Azzouz A (2017) Catalytic ozonation of orange-G through highly interactive contributions of hematite and SBA-16—to better understand azo-dye oxidation in nature. Chemosphere 168:1648–165710.1016/j.chemosphere.2016.11.120 ↗
8. Liu C, Mao H, Zheng J, Zhang S (2017) Tight ultrafiltration membrane: preparation and characterization of thermally resistant carboxylated cardo poly (arylene ether ketone)s (PAEK-COOH) tight ultrafiltration membrane for dye removal. J Membr Sci 530:1–1010.1016/j.memsci.2017.02.005 ↗
9. Raghu S, Ahmed Basha C (2007) Chemical or electrochemical techniques, followed by ion exchange, for recycle of textile dye wastewater. J Hazard Mater 149:324–33010.1016/j.jhazmat.2007.03.087 ↗
10. Bellatreche S, Hasnaoui A, Boukoussa B, García-Aguilar J, Berenguer-Murcia Á, Cazorla-Amoros D, Bengueddach A (2016) Structural and textural features of TiO2/SAPO-34 nanocomposite prepared by the sol–gel method. Res Chem Intermed 42:8039–805310.1007/s11164-016-2577-9 ↗
11. Kessouri A, Boukoussa B, Bengueddach A, Hamacha R (2017) Synthesis of iron-MFI zeolite and its photocatalytic application for hydroxylation of phenol. Res Chem Intermed. https://doi.org/10.1007/s11164-017-3241-810.1007/s11164-017-3241-8 ↗
12. Boukoussa B, Hamacha R, Morsli A, Bengueddach A (2017) Adsorption of yellow dye on calcined or uncalcined Al-MCM-41 mesoporous materials. Arab J Chem 10:S2160–S216910.1016/j.arabjc.2013.07.049 ↗
13. Kundu S, Chowdhury IH, Naskar MK (2017) Synthesis of hexagonal shaped nanoporous carbon for efficient adsorption of methyl orange dye. J Mol Liq 234:417–42310.1016/j.molliq.2017.03.090 ↗
14. Abdel Salam M, Kosa SA, Al-Beladi AA (2017) Application of nanoclay for the adsorptive removal of orange G dye from aqueous solution. J Mol Liq 241:469–47710.1016/j.molliq.2017.06.055 ↗
15. Salem ANM, Ahmed MA, El-Shahat MF (2016) Selective adsorption of amaranth dye on Fe3O4/MgO nanoparticles. J Mol Liq 219:780–78810.1016/j.molliq.2016.03.084 ↗
16. GilPavas E, Dobrosz-Gómez I, Ángel Gómez-García M (2017) Coagulation-flocculation sequential with fenton or photo-fenton processes as an alternative for the industrial textile wastewater treatment. J Environ Manag 191:189–19710.1016/j.jenvman.2017.01.015 ↗
17. Hadizade G, Binaeian E, Sarmasti Emami MR (2017) Preparation and characterization of hexagonal mesoporous silica/polyacrylamide nanocomposite capsule (PAM-HMS) for dye removal from aqueous solutions. J Mol Liq 238:499–50710.1016/j.molliq.2017.05.026 ↗
18. Aysan H, Edebali S, Ozdemir C, Karakaya MC, Karakaya N (2016) Use of chabazite, a naturally abundant zeolite, for the investigation of the adsorption kinetics and mechanism of methylene blue dye. Microporous Mesoporous Mater 235:78–8610.1016/j.micromeso.2016.08.007 ↗
19. Fardjaoui NEH, El Berrichi FZ, Ayari F (2017) Kaolin-issued zeolite A as efficient adsorbent for bezanyl yellow and nylomine green anionic dyes. Microporous Mesoporous Mater 243:91–10110.1016/j.micromeso.2017.01.008 ↗
20. Khajeh Ebrahimi A, Sheikhshoaie I, Mehran M (2017) Facile synthesis of a new metal-organic framework of copper(II) by interface reaction method, characterization, and its application for removal of Malachite Green. J Mol Liq 240:803–80910.1016/j.molliq.2017.06.097 ↗
21. Askari H, Ghaedi M, Dashtian K, Ahmadi Azghandi MH (2017) Rapid and high-capacity ultrasonic assisted adsorption of ternary toxic anionic dyes onto MOF-5-activated carbon: artificial neural networks, partial least squares, desirability function and isotherm and kinetic study. Ultrason Sonochem 37:71–8210.1016/j.ultsonch.2016.10.029 ↗
22. Fayazi M, Afzali D, Taher MA, Mostafavi A, Gupta VK (2015) Removal of safranin dye from aqueous solution using magnetic mesoporous clay: optimization study. J Mol Liq 212:675–68510.1016/j.molliq.2015.09.045 ↗
23. Chen G, Iyi N (2002) Intercalation of rhodamine 6G and oxazine 4 into oriented clay films and their alignment. J Mater Res 17:1035–104010.1557/JMR.2002.0153 ↗
24. Boukoussa B, Sebih F, Hamacha R, Bellahouel S, Derdour A, Bengueddach A (2015) Regioselective acylation of methyl-a-d-glucopyranoside with different acylating agents catalysed by micro/mesoporous materials. Res Chem Intermed 41:2221–223310.1007/s11164-013-1340-8 ↗
25. Chikh K, Boukoussa B, Bouhadjar L, Bencheikh M, Hamacha R, Meghabar R, Belbachir M, Bengueddach A (2015) Polymerization of pyrrole with 4-hydroxybenzaldehyde over Al–MCM-41 mesoporous aluminosilicate materials. Res Chem Intermed 41:6485–649610.1007/s11164-014-1755-x ↗
26. Boukoussa B, Aouad N, Hamacha R, Bengueddach A (2015) Key factor affecting the structural and textural properties of ZSM-5/MCM-41 composite. J Phys Chem Solids 78:78–8310.1016/j.jpcs.2014.11.006 ↗
27. Boukoussa B, Zeghada S, Bentabed Ababsa G, Hamacha R, Derdour A, Bengueddach A, Mongin F (2015) Catalytic behavior of surfactant-containing-MCM-41 mesoporous materials for cycloaddition of 4-nitrophenyl azide. Appl Catal A 489:131–13910.1016/j.apcata.2014.10.022 ↗
28. Ouargli-Saker R, Bouazizi N, Boukoussa B, Barrimo D, Nunes-Beltrao AP, Azzouz A (2017) Metal-loaded SBA-16-like silica–correlation between basicity and affinity towards hydrogen. Appl Surf Sci 411:476–48610.1016/j.apsusc.2017.03.165 ↗
29. Mirzaie M, Rashidi A, Tayebi HA, Yazdanshenas ME (2017) Removal of anionic dye from aqueous media by adsorption onto SBA-15/polyamidoamine dendrimer hybrid: adsorption equilibrium and kinetics. J Chem Eng Data 62:1365–137610.1021/acs.jced.6b00917 ↗
30. Sharma A, Dubey A (2017) Surface modified mesoporous silica polymer nanocomposites for adsorption of dyes from aqueous solution. J Porous Mater 24:429–43510.1007/s10934-016-0277-x ↗
31. Arica TA, Ayas E, Yakup Arica M (2017) Magnetic MCM-41 silica particles grafted with poly(glycidylmethacrylate) brush: modification and application for removal of direct dyes. Microporous Mesoporous Mater 243:164–17510.1016/j.micromeso.2017.02.011 ↗
32. Kumar Mahto T, Chandra S, Haldar C, Kumar Sahu S (2015) Kinetic and thermodynamic study of polyaniline functionalized magnetic mesoporous silica for magnetic field guided dye adsorption. RSC Adv 5:47909–4791910.1039/C5RA08284F ↗
33. Hakiki A, Boukoussa B, Zahmani HH, Hamacha R, Abdelkader NEHH, Bekkar F, Bettahar F, Nunes-Beltrao AP, Hacini S, Bengueddach A, Azzouz A (2017) Synthesis and characterization of mesoporous silica SBA-15 functionalized by mono-, di-, and tri-amine and its catalytic behavior towards Michael addition. Mater Chem Phys. https://doi.org/10.1016/j.matchemphys.2017.12.03910.1016/j.matchemphys.2017.12.039 ↗
34. Wanga X, Ma X, Song C, Locke DR, Siefert S, Winans RE, Möllmer J, Lange M, Möller A, Gläser R (2013) Molecular basket sorbents polyethylenimine–SBA-15 for CO2 capture from flue gas: characterization and sorption properties. Microporous Mesoporous Mater 169:103–11110.1016/j.micromeso.2012.09.023 ↗
35. Sauer J, Marlow F, Schüth F (2001) Simulation of powder diffraction patterns of modified ordered mesoporous materials. Phys Chem Chem Phys 3:5579–558410.1039/b108435f ↗
36. Hammond W, Prouzet E, Mahanti SD, Pinnavaia TJ (1999) Structure factor for the periodic walls of mesoporous MCM-41 molecular sieves. Microporous Mesoporous Mater 27:19–2510.1016/S1387-1811(98)00222-4 ↗
37. Wang T, Liu W, Tian J, Shao X, Sun D (2004) Structure characterization and conductive performance of polypyrrol-molybdenum disulfide intercalation materials. Polym Compos 25:11110.1002/pc.20009 ↗
38. Cheng Q, Pavlinek V, Li C, Lengalova A, He Y, Saha P (2006) Synthesis and characterization of new mesoporous material with conducting polypyrrole confined in mesoporous silica. Mater Chem Phys 98:504–50810.1016/j.matchemphys.2005.09.074 ↗
39. Furukawa Y, Tazawa S, Fujii Y, Harada I (1988) Raman spectra of polypyrrole and its 2,5-13C-substituted and C-deuterated analogues in doped and undoped states. Synth Met 24:329–34110.1016/0379-6779(88)90309-8 ↗
40. Dong J, Hu Y, Xu J, Qu X, Zhao C (2009) Nanocomposite with polypyrrole encapsulated within SBA-15 mesoporous silica: preparation and its electrochemical application. Electroanalysis 21:1792–179810.1002/elan.200804602 ↗
41. Cheng Q, Pavlinek V, Lengalova A, Li C, He Y, Saha P (2006) Conducting polypyrrole confined in ordered mesoporous silica SBA-15 channels: preparation and its electrorheology. Microporous Mesoporous Mater 93:263–26910.1016/j.micromeso.2006.03.005 ↗
42. Fang FF, Choi HJ, Ahn WS (2010) Electrorheology of a mesoporous silica having conducting polypyrrole inside expanded pores. Microporous Mesoporous Mater 130:338–34310.1016/j.micromeso.2009.11.032 ↗
43. Bérubé F, Kaliaguine S (2008) Calcination and thermal degradation mechanisms of triblock copolymer template in SBA-15 materials. Microporous Mesoporous Mater 115:469–47910.1016/j.micromeso.2008.02.028 ↗
44. Kleitz F, Schmidt W, Schűth F (2003) Calcination behavior of different surfactant-templated mesostructured silica materials. Microporous Mesoporous Mater 65:1–2910.1016/S1387-1811(03)00506-7 ↗
45. Abd El-Hafiz DR, Riad M, Mikhail S (2015) Nano-structured Mn–Al and Co–Al oxide materials for catalytic ethanol conversion. J Nanostruct Chem 5:393–40310.1007/s40097-015-0171-0 ↗
46. Parlayici S, Eskizeybek V, Avcı A, Pehlivan E (2015) Removal of chromium (VI) using activated carbon-supported-functionalized carbon nanotubes. J Nanostruct Chem 5:255–26310.1007/s40097-015-0156-z ↗
47. Zeng L, Xie M, Zhang Q, Kang Y, Guo X, Xiao H, Peng Y, Luo J (2015) Chitosan/organic rectorite composite for the magnetic uptake of methylene blue and methyl orange. Carbohyd Polym 123:89–9810.1016/j.carbpol.2015.01.021 ↗
48. Ezzeddine Z, Batonneau-Gener I, Pouilloux Y, Hamad H (2016) Removal of methylene blue by mesoporous CMK-3: kinetics, isotherms and thermodynamics. J Mol Liq 223:763–77010.1016/j.molliq.2016.09.003 ↗
49. Agarwal S, Tyagi I, Kumar Gupta V, Ghasemi N, Shahivand M, Ghasemi M (2016) Kinetics, equilibrium studies and thermodynamics of methylene blue adsorption on Ephedra strobilacea saw dust and modified using phosphoric acid and zinc chloride. J Mol Liq 218:208–21810.1016/j.molliq.2016.02.073 ↗
50. Talha Z, Bachir C, Ziri S, Bellahouel S, Bengueddach A, Villièras F, Pelletier M, Weidler PG, Hamacha R (2017) Al-Rich ordered mesoporous silica SBA-15 materials: synthesis, surface characterization and acid properties. Catal Lett 147:2116–212610.1007/s10562-017-2103-8 ↗
51. Langmuir I (1918) The adsorption of gases on plane surfaces of glass, mica and platinum. J Am Chem Soc 40:136110.1021/ja02242a004 ↗
52. Freundlich H (1907) Ueber die adsorption in loesungen. Z Phys Chem 57:385–47010.1515/zpch-1907-5723 ↗
53. Li Y, Zhou K, He M, Yao J (2016) Synthesis of ZIF-8 and ZIF-67 using mixed-base and their dye adsorption. Microporous Mesoporous Mater 234:287–29210.1016/j.micromeso.2016.07.039 ↗
54. Kundu S, Chowdhury IH, Naskar MK (2017) Synthesis of hexagonal shaped nanoporous carbon for efficient adsorption of methyl orange dye. J Mol Liq 234:417–42310.1016/j.molliq.2017.03.090 ↗
55. Alver E, Metin AÜ (2012) Anionic dye removal from aqueous solutions using modified zeolite: adsorption kinetics and isotherm studies. Chem Eng J 200:59–6710.1016/j.cej.2012.06.038 ↗
56. Tanzifi M, Hosseini SH, Kiadehi AD, Olazar M, Karimipour K, Rezaiemehr R, Ali I (2017) Artificial neural network optimization for methyl orange adsorption onto polyaniline nano-adsorbent: kinetic, isotherm and thermodynamic studies. J Mol Liq 244:189–20010.1016/j.molliq.2017.08.122 ↗
57. Agcaoili AR, Herrera MU, Futalan CM, Balela MDL (2017) Fabrication of polyacrylonitrile-coated kapok hollow microtubes for adsorption of methyl orange and Cu(II) ions in aqueous solution. J Taiwan Inst Chem Eng 78:359–36910.1016/j.jtice.2017.06.038 ↗
58. Mounia L, Belkhiri L, Bollinger JC, Bouzaza A, Assadi A, Tirri A, Dahmoune F, Madani K, Remini H (2018) Removal of methylene blue from aqueous solutions by adsorption on kaolin: kinetic and equilibrium studies. Appl Clay Sci 153:38–4510.1016/j.clay.2017.11.034 ↗
59. Hajjaji W, Andrejkovičová S, Pullar RC, Tobaldi DM, Lopez-Galindo A, Jammoussi F, Rocha F, Labrincha JA (2016) Effective removal of anionic and cationic dyes by kaolinite and TiO2/kaolinite composites. Clay Miner 51:19–2710.1180/claymin.2016.051.1.02 ↗
60. Wang S, Zhu ZH (2006) Characterisation and environmental application of an Australian natural zeolite for basic dye removal from aqueous solution. J Hazard Mater 136:946–95210.1016/j.jhazmat.2006.01.038 ↗
61. Boukoussa B, Abidallah F, Abid Z, Talha Z, Taybi N, Sid El Hadj H, Ghezini R, Hamacha R, Bengueddach A (2017) Synthesis of polypyrrole/Fe-kanemite nanocomposite through in situ polymerization: effect of iron exchange, acid treatment, and CO2 adsorption properties. J Mater Sci 52:2460–2472. https://doi.org/10.1007/s10853-016-0541-010.1007/s10853-016-0541-0 ↗