journal article·2018-01

Samarium-doped Fe3O4 nanoparticles with improved magnetic and supercapacitive performance: a novel preparation strategy and characterization

Mustafa Aghazadeh, Mohammad Reza Ganjali

Journal of Materials Science· Volume 53· Issue 1
Publisher page

Abstract

Sm3+-doped magnetite (Fe3O4) nanoparticles were synthesized through a one-pot facile electrochemical method. In this method, products were electrodeposited on a stainless steel (316L) cathode from an additive-free 0.005 M Fe(NO3)3/FeCl2/SmCl3 aqueous electrolyte. The structural characterizations through X-ray diffraction, field-emission electron microscopy, and energy-dispersive X-ray indicated that the deposited material has Sm3+-doped magnetite particles with average size of 20 nm. Magnetic analysis by VSM revealed the superparamagnetic nature of the prepared nanoparticles (Ms = 41.89 emu g−1, Mr = 0.12 emu g−1, and H Ci = 2.24 G). The supercapacitive capability evaluation of the prepared magnetite nanoparticles through cyclic voltammetry and galvanostat charge–discharge showed that these materials are capable to deliver specific capacitances as high as 207 F g−1 (at 0.5 A g−1) and 145 F g−1 (at 2 A g−1), and capacity retentions of 94.5 and 84.6% after 2000 cycling at 0.5 and 1 A g−1, respectively. The results proved the suitability of the electrosynthesized nanoparticles for use in supercapacitors. Furthermore, this work provides a facile electrochemical route for the synthesis of lanthanide-doped magnetite nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Wang Y, Song Y, Xia Y (2016) Electrochemical capacitors: mechanism, materials, systems, characterization and applications. Chem Soc Rev Oct 45:5925–595010.1039/C5CS00580A ↗
2. Aghazadeh M, Ahmadi R, Gharailou D, Ganjali MR, Norouzi P (2016) A facile route to preparation of Co3O4 nanoplates and investigation of their charge storage ability as electrode material for supercapacitors. J Mater Sci Mater Electron 27:8623–863210.1007/s10854-016-4882-x ↗
3. Aghazadeh M (2012) Electrochemical preparation and properties of nanostructured Co3O4 as supercapacitor material. J Appl Electrochem 42:89–9410.1007/s10800-011-0375-z ↗
4. Aghazadeh M, Rashidy A, Norouzi P (2016) High performance pseudocapacitor electrode material fabricated by pulse electrodeposited Co3O4 nanostructure. Int J Electrochem Sci 11:11016–1102710.20964/2016.12.116 ↗
5. Peng S, ling L, Fan W, Rao Z, Bai W, Xu JX (2017) Bacterial cellulose membranes coated by polypyrrole/copper oxide as flexible supercapacitor electrodes. J Mater Sci 52:1930–1942. doi: 10.1007/s10853-016-0482-710.1007/s10853-016-0482-7 ↗
6. Xiang D, Liu X, Dong X (2017) A facile synthetic method and electrochemical performances of nickel oxide/carbon fibers composites. J Mater Sci 52:7709–7718. doi: 10.1007/s10853-017-1019-410.1007/s10853-017-1019-4 ↗
7. Aghazadeh M, Rashidi A, Ganjali MR (2016) Nickel oxide nano-rods/plates as high performanceelectrode materials for supercapacitors. Electrosynthesis and evolution of charge storage ability, Int J Electrochem Sci 11(11002):11015
8. Behm N, Brokaw D, Overson C, Peloquin D, Poler JC (2013) High-throughput microwave synthesis and characterization of NiO nanoplates for supercapacitor devices. J Mater Sci 48:1711–1716. doi: 10.1007/s10853-012-6929-610.1007/s10853-012-6929-6 ↗
9. Barani A, Aghazadeh M, Ganjali MR, Sabour B, Barmi AAM, Dalvand S (2014) Nanostructured nickel oxide ultrafine nanoparticles: synthesis, characterization, and supercapacitive behavior. Mater Sci Semiconduct Process 23:85–9210.1016/j.mssp.2014.02.027 ↗
10. Bello A, Makgopa K, Fabiane M, Dodoo-Ahrin D, Ozoemena KI, Manyala N (2013) Chemical adsorption of NiO nanostructures on nickel foam-graphene for supercapacitor applications. J Mater Sci 48:6707–6712. doi: 10.1007/s10853-013-7471-x10.1007/s10853-013-7471-x ↗
11. Deng D, Chen N, Xiao X, Du S, Wan Y (2017) Electrochemical performance of CeO2 nanoparticle-decorated graphene oxide as an electrode material for supercapacitor. Ionics 23:121–12910.1007/s11581-016-1812-0 ↗
12. Poonguzhali R, Shanmugam N, Gobi R, Senthilkumar A, Viruthagiri G, Kannadasan N (2015) Effect of Fe doping on the electrochemical capacitor behavior of MnO2 nanocrystals. J Power Sources 293:790–79810.1016/j.jpowsour.2015.06.021 ↗
13. Aghazadeh M, Bahrami-Samani A, Gharailou D, Maragheh MG, Ganjali MR (2016) Mn3O4 nanorods with secondary plate-like nanostructures; preparation, characterization and application as high performance electrode material in supercapacitors. J Mater Sci Mater Electron 27:11192–1120010.1007/s10854-016-5239-1 ↗
14. Aghazadeh M, Ganjali MR, Norouzi P (2016) Electrochemical preparation and supercapacitive performance of α-MnO2 nanospheres with secondary wall-like structures. J Mater Sci Mater Electron 27:7707–771410.1007/s10854-016-4757-1 ↗
15. Tizfahm J, Aghazadeh M, Maragheh MG, Ganjali MR, Norouzi P (2016) Electrochemical preparation and evaluation of the supercapacitive performance of MnO2 nanoworms. Mater Lett 167:153–15610.1016/j.matlet.2015.12.158 ↗
16. Dubal DP, Holze R, Kulal PM (2013) Enhanced supercapacitive performances of hierarchical porous nanostructure assembled from ultrathin MnO2 nanoflakes. J Mater Sci 48:714–719. doi: 10.1007/s10853-012-6783-610.1007/s10853-012-6783-6 ↗
17. Aghazadeh M, Asadi M, Maragheh MG, Ganjali MR, Norouzi P (2016) Facile preparation of MnO2 nanorods and evaluation of their supercapacitive characteristics. Appl Surf Sci 364:726–73110.1016/j.apsusc.2015.12.227 ↗
18. Aghazadeh M, Maragheh MG, Ganjali MR, Norouzi P, Faridbod F (2016) Electrochemical preparation of MnO2 nanobelts through pulse base-electrogeneration and evaluation of their electrochemical performance. Appl Surf Sci 364:141–14710.1016/j.apsusc.2015.12.146 ↗
19. Aghazadeh M, Maragheh MG, Ganjali MR, Norouzi P (2016) One-step electrochemical preparation and characterization of nanostructured hydrohausmannite as electrode material for supercapacitors. RSC Adv 6:10442–1044910.1039/C5RA20498D ↗
20. Chen C, Cho M, Lee Y (2015) Electrochemical preparation and energy storage properties of nanoporous Co(OH)2 via pulse current deposition. J Mater Sci 50:6491–6497. doi: 10.1007/s10853-015-9207-610.1007/s10853-015-9207-6 ↗
21. Aghazadeh M, Malek Barmi AA, Gharailou D, Peyrovi MH, Sabour B, Najafi F (2013) Cobalt hydroxide ultra-fine nanoparticles with excellent energy storage ability. Appl Surf Sci 283:871–87510.1016/j.apsusc.2013.07.035 ↗
22. Jeong GH, Lee HM, Lee H, Kim CK, Piao Y, Lee JH, Kim JH, Kim SW (2014) One-pot synthesis of thin Co(OH)2 nanosheets on graphene and their high activity as a capacitor electrode. RSC Adv 4:51619–5162310.1039/C4RA10130H ↗
23. Aghazadeh M, Dalvand S (2014) Large-scale and facile electrochemical preparation of β-Co (OH) 2 nanocapsules and investigation of their supercapacitive performance. J Electrochem Soc 161:D18–D2510.1149/2.023401jes ↗
24. Aghazadeh M, Dalvand S, Hosseinifard M (2014) Facile electrochemical synthesis of uniform β-Co (OH)2 nanoplates for high performance supercapacitors. Ceram Int 40:3485–349310.1016/j.ceramint.2013.09.081 ↗
25. Aghazadeh M, Mohammad Shiri H, Malek Barmi AA (2013) Uniform β-Co(OH)2 disc-like nanostructures prepared by low-temperature electrochemical rout as an electrode material for supercapacitors. Appl Surf Sci 273:237–24210.1016/j.apsusc.2013.02.021 ↗
26. Cao L, Liang YY, Kong LB, Li HL (2004) Preparation of Co(OH)2/HY composite and its electrochemical capacitance characteristics. J Mater Sci 39:4697–4700. doi: 10.1023/b:jmsc.0000034174.21108.5510.1023/b:jmsc.0000034174.21108.55 ↗
27. Talat Mehrabad J, Aghazadeh M, Maragheh MG, Ganjali MR (2016) α-Co(OH)2 nanoplates with excellent supercapacitive performance: electrochemical preparation and characterization. Mater Lett 184:223–22410.1016/j.matlet.2016.08.069 ↗
28. Aghazadeh M, Ganjali MR, Maragheh MG (2017) Cobalt hydroxide nanoflakes prepared by saccharide-assisted cathodic electrochemical deposition as high performance supercapacitor electrode material. Int Electrochem Sci 12:5792–580310.20964/2017.06.48 ↗
29. Gou J, Xie S, Liu Y, Liu C (2016) Flower-like nickel-cobalt hydroxides converted from phosphites for high rate performance hybrid supercapacitor electrode. Electrochim Acta 210:915–92410.1016/j.electacta.2016.05.213 ↗
30. Tizfahm J, Safibonab B, Aghazadeh M, Majdabadi A, Sabour B, Dalvand S (2014) Supercapacitive behavior of Ni(OH)2 nanospheres prepared by a facile electrochemical method. Coll Surf A 443:544–55110.1016/j.colsurfa.2013.12.024 ↗
31. Aghazadeh M, Nozad Golikand A, Ghaemi M (2011) Synthesis, characterization, and electrochemical properties of ultrafine β-Ni(OH)2 nanoparticles. Int J Hydrogen Energy 36:8674–867910.1016/j.ijhydene.2011.03.144 ↗
32. Aghazadeh M, Ghaemi M, Sabour B, Dalvand S (2014) Electrochemical preparation of α-Ni(OH)2 ultrafine nanoparticles for high-performance supercapacitors. J Solid State Electrochem 18:1569–158410.1007/s10008-014-2381-7 ↗
33. Aghazadeh M, Sabour B, Ganjali MR, Dalvand S (2014) Preparation, characterization and electrochemical behavior of porous sphere-like α-Ni(OH)2 nanostructures. Appl Surf Sci 313:581–58410.1016/j.apsusc.2014.06.026 ↗
34. Yadav AA (2016) Preparation and electrochemical properties of spray deposited α-Fe2O3 from nonaqueous medium for supercapacitor applications. J Mater Sci Mater Electron 27:12876–1288310.1007/s10854-016-5423-3 ↗
35. Pang SC, Khoh WH, Chin SF (2010) Nanoparticulate magnetite thin films as electrode materials for the fabrication of electrochemical capacitors. J Mater Sci 45:5598–5604. doi: 10.1007/s10853-010-4622-110.1007/s10853-010-4622-1 ↗
36. Aghazadeh M, Karimzadeh I, Ganjali MR (2017) Electrochemical evaluation of the performance of cathodically grown ultra-fine magnetite nanoparticles as electrode material for supercapacitor applications. Mater Electron, J Mater Sci. doi: 10.1007/s10854-017-7192-z10.1007/s10854-017-7192-z ↗
37. Mitchell E, Gupt RK, Mensah-Darkw K, Kumar D, Ramasamy K, Gupta BK, Kahol P (2014) Facile synthesis and morphogenesis of superparamagnetic iron oxide nanoparticles for high-performance supercapacitor applications. New J Chem 38:4344–435010.1039/C4NJ00741G ↗
38. Nithya VD, Arul NS (2016) Review on α-Fe2O3 based negative electrode for high performance supercapacitors. J Power Source 327:297–31810.1016/j.jpowsour.2016.07.033 ↗
39. Wang L, Ji H, Wang S, Kong L, Jiang X, Yang G (2013) Preparation of Fe3O4 with high specific surface area and improved capacitance as a supercapacitor. Nanoscale 5:3793–379910.1039/c3nr00256j ↗
40. Wang SY, Ho KC, Kuo SL, Wu NL (2006) Investigation on capacitance mechanisms of Fe3O4 electrochemical capacitors. J Electrochem Soc 153:A75–A8010.1149/1.2131820 ↗
41. Nithya VD, Arul NS (2016) Progress and development of Fe3O4 electrodes for supercapacitors. J Mater Chem A 4:10767–1077810.1039/C6TA02582J ↗
42. Zhou Z, Xie W, Li S, Jiang X, He D, Peng S, Ma F (2015) Facile synthesis of porous Fe3O4@C nanospheres as high-performance anode for lithium-ion battery. J Solid State Electrochem 19:1211–121510.1007/s10008-015-2742-x ↗
43. Yang Y, Li J, Chen D, Zhao J (2016) A facile electrophoretic deposition route to the Fe3O4/CNTs/rGO composite electrode as a binder-free anode for lithium ion battery. ACS Appl Mater Interfaces 8:26730–2673910.1021/acsami.6b07990 ↗
44. Chen S, Huang K, Liu S (2009) Hydrothermal preparation of octadecahedron Fe3O4 thin film for use in an electrochemical supercapacitor. Electrochim Acta 55:1–510.1016/j.electacta.2009.04.017 ↗
45. Wu YZ, Chen M, Yan XH, Ren J, Dai Y, Wang JJ, Pan JM, Wang YP, Cheng XN (2017) Hydrothermal synthesis of Fe3O4 nanorods/graphitic C3N4 composite with enhanced supercapacitive performance. Mater Lett 198:114–11710.1016/j.matlet.2017.04.010 ↗
46. Fan H, Niu R, Duan J, Liu W, Shen W (2016) Fe3O4 @Carbon nanosheets for all-solid-state supercapacitor electrodes. ACS Appl Mater Interfaces 8:19475–1948310.1021/acsami.6b05415 ↗
47. Yang X, Kan J, Zhang F, Zhu M, Li Z (2017) Facile fabrication of Mn2+ doped magnetite microspheres as efficient electrode material for supercapacitors. J Inorg Org Polym Mater 27:542–55110.1007/s10904-017-0496-x ↗
48. Tang X, Jia R, Zhai T, Xia H (2015) Hierarchical Fe3O4@Fe2O3 core–shell nanorod arrays as high-performance anodes for asymmetric supercapacitors. ACS Appl Mater Interfaces 7:27518–2752510.1021/acsami.5b09766 ↗
49. Xia T, Xu X, Wang J, Xu C, Meng F, Shi Z, Lian J, Bassat JM (2015) Facile complex-coprecipitation synthesis of mesoporous Fe3O4nanocages and their high lithium storage capacity as anode material for lithium-ion batteries. Electrochim Acta 160:114–12210.1016/j.electacta.2015.02.017 ↗
50. Zhang WM, Wu XL, Hu JS, Guo YG, Wan LJ (2008) Carbon coated Fe3O4nanospindles as a superior anode material for lithium-ion batteries. Adv Funct Mater 18:3941–394610.1002/adfm.200801386 ↗
51. Xia X, Zhang Y, Chao D, Guan C, Zhang Y, Li L, Ge X, Bacho IM, Tu J, Fan HJ (2014) Solution synthesis of metal oxides for electrochemical energy storage applications. Nanoscale 6:5008–501410.1039/C4NR00024B ↗
52. Karimzadeh I, Aghazadeh M, Ganjali MR, Norouzi P, Doroudi T (2017) Saccharide-coated superparamagnetic Fe3O4 nanoparticles (SPIONs) for biomedical applications: an efficient and scalable route for preparation and in situ surface coating through cathodic electrochemical deposition (CED). Mater Lett 189:290–294. https://scholar.google.com/citations?view_op=view_citation&hl=en&user=wBHbFr8AAAAJ&sortby=pubdate&citation_for_view=wBHbFr8AAAAJ:JdL-Xu2nR38C10.1016/j.matlet.2016.12.010 ↗
53. Karimzadeh I, Rezagholipour Dizaji H, Aghazadeh M (2016) Preparation, characterization and PEGylation of superparamagnetic Fe3O4 nanoparticles from ethanol medium via cathodic electrochemical deposition (CED) method. Mater Res Express 3:09502210.1088/2053-1591/3/9/095022 ↗
54. Karimzadeh I, Aghazadeh M, Ganjali MR, Norouzi P, Shirvani-Arani S (2016) A novel method for preparation of bare and poly (vinylpyrrolidone) coated superparamagnetic iron oxide nanoparticles for biomedical applications. Mater Lett 179:5–810.1016/j.matlet.2016.05.048 ↗
55. Karimzadeh I, Aghazadeh M, Ganjali MR, Dourudi T (2017) Effective preparation, characterization and in situ surface coating of superparamagnetic Fe3O4 nanoparticles with polyethyleneimine through cathodic electrochemical deposition (CED) method for biomedical applications. Curr Nanosci 13:167–17410.2174/1573413713666161129160640 ↗
56. Karimzadeh I, Aghazadeh M, Dourudi T, Ganjali MR, Kolivand PH (2017) Superparamagnetic iron oxide (Fe3O4) nanoparticles coated with PEG/PEI for biomedical applications: a facile and scalable preparation route based on the cathodic electrochemical deposition method. Adv Phys Chem 2017:710.1155/2017/9437487 ↗
57. Karimzadeh I, Aghazadeh M, Doroudi T, Ganjali MR, Kolivand PH, Gharailou D (2017) Superparamagnetic iron oxide nanoparticles modified with alanine and leucine for biomedical applications: development of a novel efficient preparation method. Curr Nanosci 13:274–28010.2174/1573413713666170118125937 ↗
58. Beka LG, Li X, Liu W (2016) In situ grown cockscomb flower-like nanostructure of NiCo2S4 as high performance supercapacitors. J Mater Sci Mater Electron 27(10):10894–1090410.1007/s10854-016-5199-5 ↗
59. Razmjoo P, Sabour B, Dalvand S, Aghazadeh M, Ganjali MR (2014) Porous Co3O4 nanoplates: electrochemical synthesis, characterization and investigation of supercapacitive performance. J Electrochem Soc 161:D293–D30010.1149/2.059405jes ↗
60. Aghazadeh M, Karimzadeh I, Ganjali MR, Behzad A (2017) Mn2+-doped Fe3O4 nanoparticles: a novel preparation method, structural, magnetic and electrochemical characterizations. J Mater Sci Mater Electron. doi: 10.1007/s10854-017-7757-x10.1007/s10854-017-7757-x ↗
61. Aghazadeh M, Hosseinifard M (2013) Electrochemical preparation of ZrO2 nanopowder: impact of the pulse current on the crystal structure, composition and morphology. Ceram Int 39:4427–443510.1016/j.ceramint.2012.11.036 ↗
62. Aghazadeh M, Maragheh MG, Ganjali MR, Norouzi P (2017) Preparation and characterization of Mn5O8 nanoparticles: a novel and facile pulse cathodic electrodeposition followed by heat-treatment. Inorg Nano Met Chem 27:1085–108910.1080/24701556.2017.1284092 ↗
63. Aghazadeh M, Asadi M, Ganjali MR, Norouzi P, Sabour B, Emamalizadeh M (2017) Template-free preparation of vertically-aligned Mn3O4 nanorods as high supercapacitive performance electrode material. Thin Solid Films 634:24–3210.1016/j.tsf.2017.05.008 ↗
64. Karimzadeh I, Aghazadeh M, Dourudi T, Ganjali MR, Gharailou D (2017) Amino acid coated superparamagnetic iron oxide nanoparticles for biomedical applications through a novel efficient preparation method. J Cluster Sci 28(3):1259–127110.1007/s10876-016-1139-z ↗
65. Aghazadeh M, Karimzadeh I, Ganjali MR, Mohebi Morad M (2017) A novel preparation method for surface coated superparamagnetic Fe3O4 nanoparticles with vitamin C and sucrose. Mater Lett 196:392–39510.1016/j.matlet.2017.03.064 ↗
66. Aghazadeh M, Karimzadeh I, Doroudi T, Ganjali MR, Kolivand PH, Gharailou D (2017) Facile electrosynthesis and characterization of superparamagnetic nanoparticles coated with cysteine, glycine and glutamine. Appl Phys A 123:529–53710.1007/s00339-017-1145-5 ↗
67. Aghazadeh M, Karimzadeh I, Ganjali MR (2017) Enhanced supercapacitive and magnetic performances of Ho3+ doped iron oxide nanoparticles prepared through a novel one-pot electro-synthesis method. Phys Status Solidi A. doi: 10.1002/pssa.20170036510.1002/pssa.201700365 ↗
68. De Silva CR, Smith S, Shim I, Pyun J, Gutu T, Jiao J, Zheng Z (2009) Lanthanide(III)-doped magnetite nanoparticles. J Am Chem Soc 131:6336–633710.1021/ja9014277 ↗
69. Parka JC, Yeo S, Kim M, Lee GT, Seo JH (2016) Synthesis and characterization of novel lanthanide-doped magnetite @Au core@ shell nanoparticles. Mater Lett 181:272–27710.1016/j.matlet.2016.06.050 ↗
70. Douglas FJ, MacLaren DA, Maclean N, Andreu I, Kettles FJ, Tun F, Berry CC, Castro M, Murrie M (2016) Gadolinium-doped magnetite nanoparticles from a single-source precursor. RSC Adv 6:74500–7450510.1039/C6RA18095G ↗