DataVXJournal of Materials SciencePaper
journal article·2020-06

Review of cell performance in solid oxide fuel cells

Yiming Lyu, Jintao Xie, Dingbiao Wang, Jiarao Wang

Journal of Materials Science· Volume 55· Issue 17
Publisher page
Source abstract

Abstract

The solid oxide fuel cells (SOFCs) are promising electrochemical conversion devices and have been studied for several decades. While numerous achievements have been obtained in different types of electrolyte materials, respectively, systematic reviews based on cell performance have been notably rare. In this review, the overall research progress and highlights of the performance of solid oxide fuel cells based on three different types of electrolytes are described in detail. This review can provide overall perspective and useful guidance for the further development and application of SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

Energy storage

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Steele BCH, Heinzel A (2001) Materials for fuel-cell technologies. Nature 414(6861):345–35210.1038/35104620 ↗
2. Pelegrini L, João NR, Hotza D (2016) Process and materials improvements on Ni/Cu-YSZ composites towards nanostructured SOFC anodes: a review. Rev Adv Mater Sci 46:6–21
3. Reddy AA, Tulyaganov DU, Kharton VV, Ferreira José M F (2015) Development of bilayer glass-ceramic SOFC sealants via optimizing the chemical composition of glasses—a review. J Solid State Electrochem 19(10):2899–291610.1007/s10008-015-2925-5 ↗
4. Zhou G, Li B, Long Z, Zeng H, Li H (2016) Review of preparation technologies for thin electrolyte film of solid oxide fuel cells. Chin J Power Source 40(305):255–258
5. Pandey A (2018) Progress in solid oxide fuel cell (SOFC) research. JOM J Miner Metals Mater Soc 71(6396):88–89
6. Xifeng D, Ling G, Han C, Lucun G (2006) Recent research progress of lacro_3 in solid oxide fuel cell. Mater Rev 20(9):29–33
7. Lyu Y, Wang F, Wang D, Jin Z (2019) Alternative preparation methods of thin films for solid oxide fuel cells: review. Mater Technol. https://doi.org/10.1080/10667857.2019.167447810.1080/10667857.2019.1674478 ↗
8. Lee YH, Chang I, Cho GY et al (2018) Thin film solid oxide fuel cells operating below 600 °C: a review. Int J Precis Eng Manuf Green Technol 5:441–453. https://doi.org/10.1007/s40684-018-0047-010.1007/s40684-018-0047-0 ↗
9. Benamira M, Ringuedé A, Hildebrandt L, Lagergren C, Vannier RN, Cassir M (2012) Gadolinia-doped ceria mixed with alkali carbonates for SOFC applications: II—an electrochemical insight. Int J Hydrog Energy 37(24):19371–1937910.1016/j.ijhydene.2011.10.062 ↗
10. Stambouli AB, Traversa E (2002) Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy. Renew Sustain Energy Rev 6(5):433–45510.1016/S1364-0321(02)00014-X ↗
11. Lee M, Park G, Radisavljevic-Gajic V (2013) Modeling of solid oxide fuel cells (SOFCs): an overview. In: 2013 5th international conference on modeling, simulation and applied optimization, ICMSAO 2013, pp. 1–6. https://doi.org/10.1109/icmsao.2013.655268310.1109/icmsao.2013.6552683 ↗
12. Thangadurai V, Kan WH, Mirfakhraei B, Bhella SS, Trinh TT (2012) ChemInform abstract: materials for proton conducting solid oxide fuel cells (H-SOFCs). ChemInform 43(38):483–492. https://doi.org/10.1002/chin.20123821710.1002/chin.201238217 ↗
13. Hajimolana SA, Hussain MA, Daud WMAW, Soroush M, Shamiri A (2011) Mathematical modeling of solid oxide fuel cells: a review. Renew Sustain Energy Rev 15(4):1893–191710.1016/j.rser.2010.12.011 ↗
14. Ali SAM, Muchtar A, Muhamad N, Sulong AB (2011) A review on preparation of SDC-carbonate as composite electrolyte material for intermediate temperature solid oxide fuel cells (IT-SOFC). Clean Energy Technol, IEEE
15. Huang J, Mao Z, Liu Z, Wang C (2007) Development of novel low-temperature SOFCs with co-ionic conducting SDC-carbonate composite electrolytes. Electrochem Commun 9(10):2601–260510.1016/j.elecom.2007.07.036 ↗
16. Zhong HT, Ai DS, Lin XP (2014) Lsgm-carbonate composite electrolytes for intermediate-temperate SOFCs. Key Eng Mater 602–603:862–86510.4028/www.scientific.net/KEM.602-603.862 ↗
17. Ma Y, Singh M, Wang X, Yang F, Huang Q, Zhu B (2014) Study on gdc-kznal composite electrolytes for low-temperature solid oxide fuel cells. Int J Hydrog Energy 39(30):17460–1746510.1016/j.ijhydene.2014.01.143 ↗
18. Liu C, Zhang H, Xia J, Li Z (2012) Synthesis and characterization of zr0.85y0.15o1.925-la9.33si6o26composite electrolyte for application in SOFCs. J Adv Ceram 1(4):327–33510.1007/s40145-012-0033-x ↗
19. Zhu B (2001) Advantages of intermediate temperature solid oxide fuel cells for tractionary applications. J Power Sources 93(1–2):82–8610.1016/S0378-7753(00)00564-4 ↗
20. Zhu B (2001) Proton and oxygen ion-mixed-conducting ceramic composites and fuel cells. Solid State Ionics Diffus React 145(1–4):371–38010.1016/S0167-2738(01)00933-X ↗
21. Lu C, Worrell W, Vohs J, Gorte R (2003) A comparison of Cu-Ceria-SDC and Au-Ceria-SDC composites for SOFC anodes. ECS Proc. https://doi.org/10.1149/200307.0773PV10.1149/200307.0773PV ↗
22. Tao Z, Bi L, Yan L, Sun W, Zhu Z, Peng R et al (2009) A novel single phase cathode material for a proton conducting SOFC. Electrochem Commun 11(3):688–69010.1016/j.elecom.2009.01.012 ↗
23. Fuerte A, Valenzuela RX, Escudero MJ, Daza L (2009) Ammonia as efficient fuel for SOFC. J Power Sources 192(1):170–17410.1016/j.jpowsour.2008.11.037 ↗
24. Koh JH, Yoo YS, Park JW, Lim HC (2002) Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel. Solid State Ionics Diffus React 149(3–4):157–16610.1016/S0167-2738(02)00243-6 ↗
25. Carollo G, Garbujo A, Bedon A, Ferri D, Natile MM, Glisenti A (2018) Cu/CGO cermet-based electrodes for symmetric and reversible solid oxide fuel cells. Int J Hydrog Energy. https://doi.org/10.1016/j.ijhydene.2018.01.20110.1016/j.ijhydene.2018.01.201 ↗
26. Ze L, Qing-Shan Z, Min-Fang H (2010) Fabrication and performance of direct methane sofc with a cu-ceo2-based anode. Acta Phys Chim Sin 26(3):583–58810.3866/PKU.WHXB20100323 ↗
27. Kim T, Ahn K, Vohs JM, Gorte RJ (2007) Deactivation of ceria-based sofc anodes in methanol. J Power Sources 164(1):42–4810.1016/j.jpowsour.2006.09.101 ↗
28. Bogolowski N, Iwanschitz B, Drillet J-F (2015) Development of a coking-resistant nisn anode for the direct methane sofc. Fuel Cells 15(5):711–71710.1002/fuce.201400187 ↗
29. Yang BC, Koo J, Shin JW, Go D, Shim JH, An J (2017) Direct alcohol-fueled low-temperature solid oxide fuel cells: a review. Energy Technol 7(1):5–1910.1002/ente.201700777 ↗
30. Sasaki K, Watanabe K, Teraoka Y (2004) Direct-alcohol SOFCs: current-voltage characteristics and fuel gas compositions. J Electrochem Soc 151:A965–A970. https://doi.org/10.1149/1.175688410.1149/1.1756884 ↗
31. Huang J, Gao Z, Mao Z (2010) Effects of salt composition on the electrical properties of samaria-doped ceria/carbonate composite electrolytes for low-temperature SOFCs. Int J Hydrog Energy 35(9):4270–427510.1016/j.ijhydene.2010.01.063 ↗
32. Handal HT, Thangadurai V (2014) Electrochemical characterization of multi-element-doped ceria as potential anodes for SOFCs. Solid State Ionics 262:359–36410.1016/j.ssi.2013.11.037 ↗
33. Chen X, Ni W, Wang J, Zhong Q, Han M, Zhu T (2018) Exploration of co-fe alloy precipitation and electrochemical behavior hysteresis using lanthanum and cobalt co-substituted srfeo 3-δ, SOFC anode. Electrochim Acta 277:226–23410.1016/j.electacta.2018.05.019 ↗
34. Zha S, Moore A, Abernathy H, Liu M (2004) GDC-based low-temperature SOFCs powered by hydrocarbon fuels. J Electrochem Soc 151:A1128–A1133. https://doi.org/10.1149/1.176456610.1149/1.1764566 ↗
35. Wei G-L, Luo J-L, Sanger A, Chuang K (2004) High-performance anode for H2S-Air SOFCs. J Electrochem Soc 151:A232–A237. https://doi.org/10.1149/1.163617710.1149/1.1636177 ↗
36. Huang QA, Wang B, Qu W, Hui R (2009) Impedance diagnosis of metal-supported SOFCs with sdc as electrolyte. J Power Sources 191(2):297–30310.1016/j.jpowsour.2009.02.004 ↗
37. Yin Y, Zhu W, Xia C, Gao C, Meng G (2004) Low-temperature SOFCs using biomass-produced gases as fuels. J Appl Electrochem 34(12):1287–129110.1007/s10800-004-2053-x ↗
38. Gorte RJ, Kim H, Vohs JM et al (2002) Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons. ChemInform 106:10–15
39. Chen S, Tu H, Li S, Yu Q (2018) Fabrication and performance of Pr2-xLaxNiO4 + δ based cathode for intermediate temperature solid oxide fuel cells. Chin J Power Sources 42(2):219–222
40. Sun LL, Hu ZM, Luo LH et al (2017) Application of Ru nano flowers doped ni-ysz anode in ethanol-fueled SOFC. Rare Metal Mater Eng 46(08):2322–2326
41. Lu C, Worrell W, Gorte R, Vohs J (2003) SOFCs for direct oxidation of hydrocarbon fuels with samaria-doped ceria electrolyte. J Electrochem Soc 150(3):354–358. https://doi.org/10.1149/1.155376510.1149/1.1553765 ↗
42. Hong-Xin Y, Hong-Jie G, Run-Jie L, Gang C, Abuliti A, Xin-Wei D (2014) The effect of dry methane flux on the methane reactions in solid oxide fuel cell at ni-ysz anode. J Chem Eng Chin Univ 28(5):1004–1009
43. You H-X, Gao H-J, Chen G, Abudula A, Ding X-W (2013) Effects of dry methane concentration on the methane reactions at Ni-YSZ anode in solid oxide fuel cell. J Fuel Chem Technol 41:374–379
44. Fushao L, Shubiao X, Yuxing Y, Feixiang C (2018) Thermal stability and electrochemical performance of LaSrCoO_(4 ± δ) as the cathode material for solid-oxide fuel cells. J Kunming Univ Sci Technol (Natural Science) 43(5):14–21
45. Xiu-Xia M, Gong X, Tan XY et al (2013) Preparation and properties of direct-methane solid oxide fuel cell based on a graded Cu-CeO2-Ni-YSZ composite anode. Acta Physico-Chimica Sinica 29:1719–172610.3866/PKU.WHXB201305151 ↗
46. Kilner JA (2000) Fast oxygen transport in acceptor doped oxides. Solid State Ionics Diffus React 129(1–4):13–2310.1016/S0167-2738(99)00313-6 ↗
47. Tikkanen H, Suciu C, Wærnhus I, Hoffmann AC (2011) Dip-coating of 8ysz nanopowder for sofc applications. Ceram Int 37(7):2869–287710.1016/j.ceramint.2011.05.006 ↗
48. Fernández-González R, Molina T, Savvin S, Moreno R, Makradi A, Núñez P (2014) Fabrication and electrical characterization of several YSZ tapes for SOFC applications. Ceram Int 40(9):14253–1425910.1016/j.ceramint.2014.06.015 ↗
49. Park I, Ahn J, Im J, Choi J, Shin D (2012) Influence of rheological characteristics of YSZ suspension on the morphology of YSZ films deposited by electrostatic spray deposition. Ceram Int 38(supp-S1):S481–S48410.1016/j.ceramint.2011.05.058 ↗
50. Oskouyi OE, Maghsoudipour A, Shahmiri M, Hasheminiasari M (2019) Preparation of YSZ electrolyte coating on conducting porous Ni–YSZ cermet by DC and pulsed constant voltage electrophoretic deposition process for SOFCs applications. J Alloy Compd 795:361–369. https://doi.org/10.1016/j.jallcom.2019.04.33410.1016/j.jallcom.2019.04.334 ↗
51. Jiang Y, Virkar A (2001) A high performance, anode-supported solid oxide fuel cell operating on direct alcohol. J Electrochem Soc 148(7):706–70910.1149/1.1375166 ↗
52. Satardekar P, Montinaro D, Sglavo V (2015) Fe-doped YSZ electrolyte for the fabrication of metal supported-SOFC by co-sintering. Ceram Int 41(8):9806–981210.1016/j.ceramint.2015.04.053 ↗
53. Toor S, Croiset E (2019) Reducing sintering temperature while maintaining high conductivity for SOFC electrolyte: copper as sintering aid for Samarium Doped Ceria. Ceram Int 46:1148–1157. https://doi.org/10.1016/j.ceramint.2019.09.08310.1016/j.ceramint.2019.09.083 ↗
54. Fu Z, Sun Q, Ma D, Zhang N, An Y, Yang Z (2017) Effects of Sm doping content on the ionic conduction of CeO 2 in SOFCs from first principles. Appl Phys Lett. https://doi.org/10.1063/1.499389710.1063/1.4993897 ↗
55. Lee D-S, Kim W, Choi S-H, Lee H, Lee JH (2005) Characterization of ZrO2 Co-doped with Sc2O3 and CeO2 electrolyte for the application of intermediate temperature SOFCs. Solid State Ionics 176:33–39. https://doi.org/10.1016/j.ssi.2004.07.01310.1016/j.ssi.2004.07.013 ↗
56. Li X, Shao G-Q, Luo J, Lu J, Xue M-s, Hou Y, Deng L (2013) Fabrication and characterization of GDC electrolyte/electrode integral SOFC with BaO/Ni-GDC anode. Mater Res Bull 50:337–340. https://doi.org/10.1016/j.materresbull.2013.11.03410.1016/j.materresbull.2013.11.034 ↗
57. Solovev A, Shipilova A, Ionov I, Kovalchuk A, Rabotkin S, Oskirko V (2016) Magnetron-sputtered YSZ and CGO electrolytes for SOFC. J Electron Mater 45:3291–3928. https://doi.org/10.1007/s11664-016-4462-010.1007/s11664-016-4462-0 ↗
58. Joh D, Park J, Kim D, Wachsman E, Lee K (2017) Functionally graded bismuth oxide/zirconia bilayer electrolytes for high performance intermediate-temperature solid oxide fuel cells (IT-SOFCs). ACS Appl Mater Interfaces 9(10):8443–844910.1021/acsami.6b16660 ↗
59. Singh RK, Singh P (2014) Electrical conductivity of barium substituted LSGM electrolyte materials for IT-SOFC. Solid State Ionics 262:428–432. https://doi.org/10.1016/j.ssi.2014.01.04410.1016/j.ssi.2014.01.044 ↗
60. Sun H, Sen W, Ma W-H, Yu J, Yang J-J (2014) Fabrication of LSGM thin films on porous anode supports by slurry spin coating for IT-SOFC. Rare Met 34:797–801. https://doi.org/10.1007/s12598-014-0346-810.1007/s12598-014-0346-8 ↗
61. Ma Q, Ma J, Zhou S, Yan R, Gao J, Meng G (2007) A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte. J Power Sources 164:86–89. https://doi.org/10.1016/j.jpowsour.2006.09.09310.1016/j.jpowsour.2006.09.093 ↗
62. Fuerte A, Valenzuela R, Escudero M, Daza L (2009) Ammonia as efficient fuel for SOFC. J Power Sources 192:170–174. https://doi.org/10.1016/j.jpowsour.2008.11.03710.1016/j.jpowsour.2008.11.037 ↗
63. Lei Z, Zhu Q-S, Han M-F (2010) Fabrication and performance of direct methane SOFC with a Cu-CeO2-based anode. Acta Phys Chim Sin 26:583–588. https://doi.org/10.3866/PKU.WHXB2010032310.3866/PKU.WHXB20100323 ↗
64. Worrell W, Vohs J, Gorte R (2003) A comparison of Cu-ceria-SDC and Au-ceria-SDC composites for SOFC anodes. J Electrochem Soc 150:A1357–A1359. https://doi.org/10.1149/1.160800310.1149/1.1608003 ↗
65. Yang L, Zuo C, Wang S, Cheng Z, Liu M (2008) A novel composite cathode for low-temperature SOFCs based on oxide proton conductors. Adv Mater 20:3280–3283. https://doi.org/10.1002/adma.20070276210.1002/adma.200702762 ↗
66. Tao Z, Bi L, Yan L, Sun W, Zhu Z, Peng R, Liu W (2009) A novel single phase cathode material for a proton conducting SOFC. Electrochem Commun 11:688–690. https://doi.org/10.1016/j.elecom.2009.01.01210.1016/j.elecom.2009.01.012 ↗
67. Demin A, Tsiakaras P, Gorbova E, Hramova S (2004) A SOFC based on a co-ionic electrolyte. J Power Sources 131:231–236. https://doi.org/10.1016/j.jpowsour.2003.10.01610.1016/j.jpowsour.2003.10.016 ↗
68. Zhu Y, Zhou W, Chen Y, Shao Z (2016) An aurivillius oxide based cathode with excellent CO2 tolerance for intermediate-temperature solid oxide fuel cells. Angew Chem 128:8988–8993. https://doi.org/10.1002/ange.20160416010.1002/ange.201604160 ↗
69. Huang Y, Vohs J, Gorte R (2006) An examination of LSM-LSCo mixtures for use in SOFC cathodes. J Electrochem Soc 153:A951–A955. https://doi.org/10.1149/1.218618310.1149/1.2186183 ↗
70. Cherng J, Ho M, Yeh TH, Chen WH (2012) Anode-supported micro-tubular SOFCs made by aqueous electrophoretic deposition. Ceram Int 38:S477–S480. https://doi.org/10.1016/j.ceramint.2011.05.05710.1016/j.ceramint.2011.05.057 ↗
71. Wang Z, Cheng M, Dong Y, Zhang M (2006) Anode-supported SOFC with 1Ce10ScZr modified cathode/electrolyte interface. J Power Sources 156:306–310. https://doi.org/10.1016/j.jpowsour.2005.06.03510.1016/j.jpowsour.2005.06.035 ↗
72. Yuan K, Zhu J, Dong W, Yu Y, Lu X, Xiaojuan J, Wang X (2017) Applying low-pressure plasma spray (LPPS) for coatings in low-temperature SOFC. Int J Hydrog Energy 42:22243–22249. https://doi.org/10.1016/j.ijhydene.2017.04.21510.1016/j.ijhydene.2017.04.215 ↗
73. Jaiswal A, Wachsman E (2005) Bismuth-ruthenate-based cathodes for IT-SOFCs. J Electrochem Soc 152:A787–A790. https://doi.org/10.1149/1.186609310.1149/1.1866093 ↗
74. Koh J-H, Yoo Y-S, Park J, Lim H (2002) Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel. Solid State Ionics 149:157–166. https://doi.org/10.1016/S0167-2738(02)00243-610.1016/S0167-2738(02)00243-6 ↗
75. Kharton V, Figueiredo F, Navarro L, Naumovich E, Kovalevsky A, Yaremchenko A, Viskup A, Carneiro A, Marques F, Frade J (2001) Ceria-based materials for solid oxide fuel cells. J Mater Sci 36:1105–1117. https://doi.org/10.1023/A:100481750614610.1023/A:1004817506146 ↗
76. Kupecki J, Kluczowski R, Papurello D, Lanzini A, Kawalec M, Krauz M, Santarelli M (2018) Characterization of a circular 80 mm anode supported solid oxide fuel cell (AS-SOFC) with anode support produced using high-pressure injection molding (HPIM). Int J Hydrog Energy. https://doi.org/10.1016/j.ijhydene.2018.02.14310.1016/j.ijhydene.2018.02.143 ↗
77. Im H-N, Jeon S-Y, Choi M-B, Kim H-S, Song S-J (2012) Chemical stability and electrochemical properties of CaMoO 3 − δ for SOFC anode. Ceram Int Ceram Int 38:153–158. https://doi.org/10.1016/j.ceramint.2011.05.15510.1016/j.ceramint.2011.05.155 ↗
78. Ma Q, Tietz F (2012) Comparison of Y and La-substituted SrTiO3 as the anode materials for SOFCs. Solid State Ionics 225:108–112. https://doi.org/10.1016/j.ssi.2012.03.04810.1016/j.ssi.2012.03.048 ↗
79. Carollo G, Garbujo A, Bedon A, Ferri D, Natile M, Glisenti A (2018) Cu/CGO cermet based electrodes for symmetric and reversible solid oxide fuel cells. Int J Hydrog Energy. https://doi.org/10.1016/j.ijhydene.2018.01.20110.1016/j.ijhydene.2018.01.201 ↗
80. Marcucci A, Luisetto I, Zurlo F, Licoccia S, Bartolomeo E (2019) Pd-doped perovskite-based SOFC anodes for biogas. J Solid State Electrochem. https://doi.org/10.1007/s10008-019-04473-510.1007/s10008-019-04473-5 ↗
81. Lang M, Henne R, Schaper S, Schiller G (2001) Development and characterisation of vacuum plasma sprayed thin film SOFCs. J Therm Spray Technol 10:618–625. https://doi.org/10.1361/10599630177034914110.1361/105996301770349141 ↗
82. Bogolowski N, Iwanschitz B, Drillet J-F (2015) Development of a coking-resistant NiSn anode for the direct methane SOFC. Fuel Cells 15:711–717. https://doi.org/10.1002/fuce.20140018710.1002/fuce.201400187 ↗
83. Akikusa J, Adachi K, Hoshino K, Ishihara T, Takita Y (2001) Development of a low temperature operation solid oxide fuel cell. J Electrochem Soc 148:A1275–A1278. https://doi.org/10.1149/1.140997210.1149/1.1409972 ↗
84. Yang B, Koo J, Shin J, Go D, Shim J, An J (2017) Direct alcohol-fueled low-temperature solid oxide fuel cells: a review. Energy Technol 7:5–19. https://doi.org/10.1002/ente.20170077710.1002/ente.201700777 ↗
85. Xie Z-X, Chen T, Wang Z-M, Shen Z-Y, Liao R, Li Y-M (2016) Effect of a-site deficiency on the performance of La0.6Sr1.4MgMoO6 for solid oxide fuel cell. Front Energy Res 45:1180–1185
86. Li C-J, Li C-X, Wang M (2005) Effect of spray parameters on the electrical conductivity of plasma-sprayed La1 − xSrxMnO3 coating for the cathode of SOFCs. Surf Coat Technol 198:278–282. https://doi.org/10.1016/j.surfcoat.2004.10.08310.1016/j.surfcoat.2004.10.083 ↗
87. He H, Vohs J, Gorte R (2003) Effect of synthesis conditions on the performance of Cu-CeO2-YSZ anodes in SOFCs. J Electrochem Soc 150:A1470–A1475. https://doi.org/10.1149/1.161426810.1149/1.1614268 ↗
88. Zhu W, Xia C, Ding D, Shi X, Meng G (2006) Electrical properties of ceria-carbonate composite electrolytes. Mater Res Bull 41:2057–2064. https://doi.org/10.1016/j.materresbull.2006.04.00110.1016/j.materresbull.2006.04.001 ↗
89. Fu C, Sun K, Zhang N, Xinbing C, Zhou D (2007) Electrochemical characteristics of LSCF–SDC composite cathode for intermediate temperature SOFC. Electrochim Acta 52:4589–4594. https://doi.org/10.1016/j.electacta.2007.01.00110.1016/j.electacta.2007.01.001 ↗
90. Handal H, Thangadurai V (2013) Electrochemical characterization of multi-element-doped ceria as potential anodes for SOFCs. Solid State Ionics 262:359–364. https://doi.org/10.1016/j.ssi.2013.11.03710.1016/j.ssi.2013.11.037 ↗
91. Ramos T, Sogaard M, Mogensen M (2014) Electrochemical characterization of Ni/ScYSZ electrodes as SOFC anodes. J Electrochem Soc 161:F434–F444. https://doi.org/10.1149/2.045404jes10.1149/2.045404jes ↗
92. Lyskov N, Kaluzhskikh M, Leonova L, Mazo G, Istomin S, Antipov E (2012) Electrochemical characterization of Pr2CuO4 cathode for IT-SOFC. Int J Hydrog Energy 37:18357–18364. https://doi.org/10.1016/j.ijhydene.2012.09.09910.1016/j.ijhydene.2012.09.099 ↗
93. Hwang H, Moon J-W, Lee S, Lee E (2005) Electrochemical performance of LSCF-based composite cathodes for intermediate temperature SOFCs. J Power Sources 145:243–248. https://doi.org/10.1016/j.jpowsour.2005.02.06310.1016/j.jpowsour.2005.02.063 ↗
94. Peng R, Wu Y, Lizhai Y, Zongqiang M (2006) Electrochemical properties of IT-SOFC based on proton conducting Sm-doped BaCeO3 electrolyte thin film. Solid State Ionics 177:389–393. https://doi.org/10.1016/j.ssi.2005.11.02010.1016/j.ssi.2005.11.020 ↗
95. Zha SW, Li HB, Xia C, Liu XQ, Meng GY (2003) Electrochemical properties of La0.8Sr0.2Ga0.8Mg0.2O2.8 electrolyte and its application to SOFCs. Chem J Chin Univ Chinese Edn 24:506–508
96. Chen X, Ni W, Du X, Zhong Q, Zhu T, Han M (2018) Electrochemical property of multi-layer anode supported solid oxide fuel cell fabricated through sequential tape-casting and co-firing. J Mater Sci Technol 35:695–701. https://doi.org/10.1016/j.jmst.2018.10.01510.1016/j.jmst.2018.10.015 ↗
97. Jafari M, Salamati H, Zhiani M, Shahsavari E (2018) Enhancement of an IT-SOFC cathode by introducing YSZ: electrical and electrochemical properties of composites. Int J Hydrog Energy. https://doi.org/10.1016/j.ijhydene.201810.1016/j.ijhydene.2018 ↗
98. Yang C, Li W, Shangquan Z, Bi L, Peng R, Chen C, Liu W (2009) Fabrication and characterization of an anode-supported hollow fiber SOFC. J Power Sources 187:90–92. https://doi.org/10.1016/j.jpowsour.2008.10.06910.1016/j.jpowsour.2008.10.069 ↗
99. Xu D, Liu X, Wang D, Yi G, Gao Y, Zhang D, Su W (2007) Fabrication and characterization of SDC–LSGM composite electrolytes material in IT-SOFCs. J Alloy Compd 429:292–295. https://doi.org/10.1016/j.jallcom.2006.04.00910.1016/j.jallcom.2006.04.009 ↗
100. Somalu M, Yufit V, Cumming D, Lorente E, Brandon NP (2011) Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs. Fuel Energy Abstr 36:5557–5566. https://doi.org/10.1016/j.ijhydene.2011.01.15110.1016/j.ijhydene.2011.01.151 ↗