Grain boundary phase transformations in PtAu and relevance to thermal stabilization of bulk nanocrystalline metals
Source abstract
Abstract
There has recently been a great deal of interest in employing immiscible solutes to stabilize nanocrystalline microstructures. Existing modeling efforts largely rely on mesoscale Monte Carlo approaches that employ a simplified model of the microstructure and result in highly homogeneous segregation to grain boundaries. However, there is ample evidence from experimental and modeling studies that demonstrates segregation to grain boundaries is highly non-uniform and sensitive to boundary character. This work employs a realistic nanocrystalline microstructure with experimentally relevant global solute concentrations to illustrate inhomogeneous boundary segregation. Experiments quantifying segregation in thin films are reported that corroborate the prediction that grain boundary segregation is highly inhomogeneous. In addition to grain boundary structure modifying the degree of segregation, the existence of a phase transformation between low and high solute content grain boundaries is predicted. In order to conduct this study, new embedded atom method interatomic potentials are developed for Pt, Au, and the PtAu binary alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · nanoparticles nucleation surface interactions · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Gleiter H (1989) Nanocrystalline materials. Prog Mater Sci 33:223–31510.1016/0079-6425(89)90001-7 ↗
2. Chookajorn T, Schuh CA (2014) Nanoscale segregation behavior and high-temperature stability of nanocrystalline W-20at.% Ti. Acta Mater 73:128–138. doi: 10.1016/j.actamat.2014.03.03910.1016/j.actamat.2014.03.039 ↗
3. Chookajorn T, Park M, Schuh CA (2015) Duplex nanocrystalline alloy: entropic nanostructure stabilization and a case study on W–Cr. J Mater Res 30:151–163. doi: 10.1557/jmr.2014.38510.1557/jmr.2014.385 ↗
4. Hornbuckle BC, Rojhirunsakool T, Rajagopalan M, Alam T, Purja Pun GP, Banerjee R, Solanki KN, Mishin Y, Kecskes LJ, Darling KA (2015) Effect of Ta solute concentration on the microstructural evolution in immiscible Cu–Ta alloys. JOM 67(12):2802–2809. doi: 10.1007/s11837-015-1643-x10.1007/s11837-015-1643-x ↗
5. Kurz S, Leineweber A, Mittemeijer E (2014) Anomalously high density and thermal stability of nanotwins in Ni(W) thin films: quantitative analysis by X-ray diffraction. J Mater Res 29(15):1642–1655. doi: 10.1557/jmr.2014.20210.1557/jmr.2014.202 ↗
6. Khalajhedayati A, Rupert TJ (2015) High-temperature stability and grain boundary complexion formation in a nanocrystalline Cu–Zr alloy. JOM 67(12):2788–2801. doi: 10.1007/s11837-015-1644-910.1007/s11837-015-1644-9 ↗
7. Darling K, VanLeeuwen B, Koch C, Scattergood R (2010) Thermal stability of nanocrystalline Fe–Zr alloys. Mater Sci Eng A 527(15):3572–3580. doi: 10.1016/j.msea.2010.02.04310.1016/j.msea.2010.02.043 ↗
8. Darling KA, Chan RN, Wong PZ, Semones JE, Scattergood RO, Koch CC (2008) Grain-size stabilization in nanocrystalline FeZr alloys. Scr Mater 59(5):530–533. doi: 10.1016/j.scriptamat.2008.04.04510.1016/j.scriptamat.2008.04.045 ↗
9. Millett PC, Selvam RP, Saxena A (2006) Molecular dynamics simulations of grain size stabilization in nanocrystalline materials by addition of dopants. Acta Mater 54(2):297–303. doi: 10.1016/j.actamat.2005.07.02410.1016/j.actamat.2005.07.024 ↗
10. Weissmüller J (1993) Alloy effects in nanostructures. Nanostruct Mater 3(2):261–272. doi: 10.1016/0965-9773(93)90088-S10.1016/0965-9773(93)90088-S ↗
11. Koch CC, Scattergood RO, Saber M, Kotan H (2013) High temperature stabilization of nanocrystalline grain size: thermodynamic versus kinetic strategies. J Mater Res 28(13):1785–1791. doi: 10.1557/jmr.2012.42910.1557/jmr.2012.429 ↗
12. Kalidindi AR, Chookajorn T, Schuh CA (2015) Nanocrystalline materials at equilibrium: a thermodynamic review. JOM 67(12):2834–2843. doi: 10.1007/s11837-015-1636-910.1007/s11837-015-1636-9 ↗
13. Andrievski RA (2014) Review of thermal stability of nanomaterials. J Mater Sci 49(4):1449–1460. doi: 10.1007/s10853-013-7836-110.1007/s10853-013-7836-1 ↗
14. Trelewicz JR, Schuh CA (2009) Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys. Phys Rev B 79(9):094112. doi: 10.1103/PhysRevB.79.09411210.1103/PhysRevB.79.094112 ↗
15. Murdoch HA, Schuh CA (2013) Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design. J Mater Res 28(16):2154–2163. doi: 10.1557/jmr.2013.21110.1557/jmr.2013.211 ↗
16. Darling K, Tschopp M, VanLeeuwen B, Atwater M, Liu Z (2014) Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps. Comput Mater Sci 84:255–266. doi: 10.1016/j.commatsci.2013.10.01810.1016/j.commatsci.2013.10.018 ↗
17. Kalidindi AR, Schuh CA (2017) Phase transitions in stable nanocrystalline alloys. J Mater Res 32(11):1993–2002. doi: 10.1557/jmr.2017.18810.1557/jmr.2017.188 ↗
18. Phillpot SR, Wolf D, Gleiter H (1995) A structural model for grain boundaries in nanocrystalline materials. Scr Metall Mater 33(8):1245–1251. doi: 10.1016/0956-716X(95)00350-510.1016/0956-716X(95)00350-5 ↗
19. Cantwell PR, Tang M, Dillon SJ, Luo J, Rohrer GS, Harmer MP (2013) Grain boundary complexions. Acta Mater 62(152):1–48. doi: 10.1016/j.actamat.2013.07.03710.1016/j.actamat.2013.07.037 ↗
20. Han J, Vitek V, Srolovitz DJ (2016) Grain-boundary metastability and its statistical properties. Acta Mater 104:259–273. doi: 10.1016/j.actamat.2015.11.03510.1016/j.actamat.2015.11.035 ↗
21. Homer ER, Holm EA, Foiles SM, Olmsted DL (2014) Trends in grain boundary mobility: survey of motion mechanisms. JOM 66(1):114–120. doi: 10.1007/s11837-013-0801-210.1007/s11837-013-0801-2 ↗
22. Olmsted DL, Foiles SM, Holm EA (2009) Survey of computed grain boundary properties in face-centered cubic metals: I. Grain boundary energy. Acta Mater 57(13):3694–3703. doi: 10.1016/j.actamat.2009.04.00710.1016/j.actamat.2009.04.007 ↗
23. Ratanaphan S, Olmsted DL, Bulatov VV, Holm EA, Rollett AD, Rohrer GS (2015) Grain boundary energies in body-centered cubic metals. Acta Mater 88:346–354. doi: 10.1016/j.actamat.2015.01.06910.1016/j.actamat.2015.01.069 ↗
24. Olmsted DL, Holm EA, Foiles SM (2009) Survey of computed grain boundary properties in face-centered cubic metals—II: grain boundary mobility. Acta Mater 57(13):3704–3713. doi: 10.1016/j.actamat.2009.04.01510.1016/j.actamat.2009.04.015 ↗
25. Barr CM, Vetterick GA, Unocic KA, Hattar K, Bai XM, Taheri ML (2014) Anisotropic radiation-induced segregation in 316L austenitic stainless steel with grain boundary character. Acta Mater 67:145–155. doi: 10.1016/j.actamat.2013.11.06010.1016/j.actamat.2013.11.060 ↗
26. Barr CM, Barnard L, Nathaniel JE, Hattar K, Unocic KA, Szlurfarska I, Morgan D, Taheri ML (2015) Grain boundary character dependence of radiation-induced segregation in a model Ni–Cr alloy. J Mater Res 30(09):1290–1299. doi: 10.1557/jmr.2015.3410.1557/jmr.2015.34 ↗
27. Diercks DR, Tong J, Zhu H, Kee R, Baure G, Nino JC, O’Hayre R, Gorman BP (2016) Three-dimensional quantification of composition and electrostatic potential at individual grain boundaries in doped ceria. J Mater Chem A 4(14):5167–5175. doi: 10.1039/C5TA10064J10.1039/C5TA10064J ↗
28. Herbig M, Raabe D, Li YJ, Choi P, Zaefferer S, Goto S (2014) Atomic-scale quantification of grain boundary segregation in nanocrystalline material. Phys Rev Lett 112(12):126103. doi: 10.1103/PhysRevLett.112.12610310.1103/PhysRevLett.112.126103 ↗
29. Yao L, Ringer S, Cairney J, Miller M (2013) The anatomy of grain boundaries: their structure and atomic-level solute distribution. Scr Mater 69(8):622–625. doi: 10.1016/j.scriptamat.2013.07.01310.1016/j.scriptamat.2013.07.013 ↗
30. Sickafus K, Sass S (1987) Grain boundary structural transformations induced by solute segregation. Acta Metall 35(1):69–79. doi: 10.1016/0001-6160(87)90214-810.1016/0001-6160(87)90214-8 ↗
31. Wynblatt P, Chatain D (2008) Solid-state wetting transitions at grain boundaries. Mater Sci Eng A 495(1–2):119–125. doi: 10.1016/j.msea.2007.09.09110.1016/j.msea.2007.09.091 ↗
32. Wynblatt P, Liu Y (1992) Two-dimensional phase transitions associated with surface miscibility gaps. J Vac Sci Technol A: Vac Surf Films 10(4):2709–2717. doi: 10.1116/1.57796310.1116/1.577963 ↗
33. Cheng WC, Wynblatt P (1997) Equilibrium form of PbBiNi alloy crystals. J Cryst Growth 173(3–4):513–527. doi: 10.1016/S0022-0248(96)01049-410.1016/S0022-0248(96)01049-4 ↗
34. Abdeljawad F, Lu P, Argibay N, Clark BG, Boyce BL, Foiles SM (2017) Grain boundary segregation in immiscible nanocrystalline alloys. Acta Mater 126:528–539. doi: 10.1016/j.actamat.2016.12.03610.1016/j.actamat.2016.12.036 ↗
35. Bishop CM, Cannon RM, Carter WC (2005) A diffuse interface model of interfaces: grain boundaries in silicon nitride. Acta Mater 53(18):4755–4764. doi: 10.1016/j.actamat.2005.07.00810.1016/j.actamat.2005.07.008 ↗
36. Tang M, Carter WC, Cannon RM (2006) Grain boundary transitions in binary alloys. Phys Rev Lett 97(7):075502. doi: 10.1103/PhysRevLett.97.07550210.1103/PhysRevLett.97.075502 ↗
37. Clark BG, Hattar K, Marshall MT, Chookajorn T, Boyce BL, Schuh CA (2016) Thermal stability comparison of nanocrystalline Fe-based binary alloy pairs. JOM 68(6):1625–1633. doi: 10.1007/s11837-016-1868-310.1007/s11837-016-1868-3 ↗
38. Foiles S, Baskes M, Daw M (1986) Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys. Phys Rev B 33(12):7983–7991. doi: 10.1103/PhysRevB.33.798310.1103/PhysRevB.33.7983 ↗
39. Foiles S, Baskes M, Daw M (1988) Erratum: embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys. Phys Rev B 37(17):10378–10378. doi: 10.1103/PhysRevB.37.1037810.1103/PhysRevB.37.10378 ↗
40. Ercolessi F, Adams JB (1994) Interatomic potentials from first-principles calculations: the force-matching method. Europhys Lett 26(8):583. doi: 10.1209/0295-5075/26/8/005 (9306054)10.1209/0295-5075/26/8/005 ↗
41. Foiles SM (1985) Calculation of the surface segregation of Ni–Cu alloys with the use of the embedded-atom method. Phys Rev B 32(12):7685–7693. doi: 10.1103/PhysRevB.32.768510.1103/PhysRevB.32.7685 ↗
42. Seki A, Seidman D, Oh Y, Foiles S (1991) Monte Carlo simulations of segregation at [001] twist boundaries in a Pt(Au) alloy—I. Results. Acta Metall Mater 39(12):3167–3177. doi: 10.1016/0956-7151(91)90051-210.1016/0956-7151(91)90051-2 ↗
43. Seki A, Seidman D, Oh Y, Foiles S (1991) Monte Carlo simulations of segregation at [001] twist boundaries in a Pt(Au) alloy—II. Discussion. Acta Metall Mater 39(12):3179–3185. doi: 10.1016/0956-7151(91)90052-310.1016/0956-7151(91)90052-3 ↗
44. Plimpton S (1995) Fast parallel algorithms for short-range molecular dynamics. J Comput Phys 117(1):1–19. doi: 10.1006/jcph.1995.103910.1006/jcph.1995.1039 ↗
45. Sadigh B, Erhart P, Stukowski A, Caro A, Martinez E, Zepeda-Ruiz L (2012) Scalable parallel Monte Carlo algorithm for atomistic simulations of precipitation in alloys. Phys Rev B Condens Matter Mater Phys 85(18):184203. doi: 10.1103/PhysRevB.85.184203 (1012.5082)10.1103/PhysRevB.85.184203 ↗
46. Gruber J, Lim H, Abdeljawad F, Foiles S, Tucker GJ (2017) Development of physically based atomistic microstructures: the effect on the mechanical response of polycrystals. Comput Mater Sci 128:29–36. doi: 10.1016/j.commatsci.2016.07.01110.1016/j.commatsci.2016.07.011 ↗
47. Cahn JW (1977) Thermodynamics of solid and fluid surfaces. In: Johnson WC, Blakely JM (eds) Interfacial segregation. American Society of Metals, Metals Park, pp 193–228
48. Hattar K, Bufford D, Buller D (2014) Concurrent in situ ion irradiation transmission electron microscope. Nucl Instrum Methods Phys Res Sect B: Beam Interact Mater Atoms 338:56–65. doi: 10.1016/j.nimb.2014.08.00210.1016/j.nimb.2014.08.002 ↗
49. Argibay N, Brumbach MT, Dugger MT, Kotula PG (2013) Grain boundary diffusivity of Ni in Au thin films and the associated degradation in electrical contact resistance due to surface oxide film formation. J Appl Phys 113(11):114906. doi: 10.1063/1.479576810.1063/1.4795768 ↗
50. Williams DB, Carter CB (2009) Transmission electron microscopy, 2nd edn. Springer, Boston. doi: 10.1007/978-0-387-76501-310.1007/978-0-387-76501-3 ↗
51. Faken D, Jónsson H (1994) Systematic analysis of local atomic structure combined with 3D computer graphics. Comput Mater Sci 2(2):279–286. doi: 10.1016/0927-0256(94)90109-010.1016/0927-0256(94)90109-0 ↗
52. Tsuzuki H, Branicio PS, Rino JP (2007) Structural characterization of deformed crystals by analysis of common atomic neighborhood. Comput Phys Commun 177(6):518–523. doi: 10.1016/j.cpc.2007.05.01810.1016/j.cpc.2007.05.018 ↗
53. Kelchner CL, Plimpton SJ, Hamilton JC (1998) Dislocation nucleation and defect structure during surface indentation. Phys Rev B 58(17):11085–11088. doi: 10.1103/PhysRevB.58.1108510.1103/PhysRevB.58.11085 ↗
54. Mendelev MI, Deng C, Schuh CA, Srolovitz DJ (2013) Comparison of molecular dynamics simulation methods for the study of grain boundary migration. Model Simul Mater Sci Eng 21(4):045017. doi: 10.1088/0965-0393/21/4/04501710.1088/0965-0393/21/4/045017 ↗
55. Hart EW (1968) Two-dimensional phase transformation in grain boundaries. Scr Metall 2(3):179–182. doi: 10.1016/0036-9748(68)90222-610.1016/0036-9748(68)90222-6 ↗
56. Holm EA, Foiles SM (2010) How grain growth stops: a mechanism for grain-growth stagnation in pure materials. Science 328(5982):1138–1141. doi: 10.1126/science.118783310.1126/science.1187833 ↗
57. O’Brien CJ, Foiles SM (2016) Hydrogen segregation to inclined twin grain boundaries in nickel. Philos Mag 96(26):2808–2828. doi: 10.1080/14786435.2016.121709410.1080/14786435.2016.1217094 ↗
58. Morse PM (1929) Diatomic molecules according to the wave mechanics. II. Vibrational levels. Phys Rev 34(1):57–64. doi: 10.1103/PhysRev.34.5710.1103/PhysRev.34.57 ↗
59. Rose JH, Smith JR, Guinea F, Ferrante J (1984) Universal features of the equation of state of metals. Phys Rev B 29(6):2963–2969. doi: 10.1103/Physrevb.29.296310.1103/PhysRevB.29.2963 ↗
60. Adams BM, Dalbey KR, Eldred MS, Gay DM, Swiler LP, Bohnhoff WJ, Eddy JP, Haskell K (2014) DAKOTA, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis (SAND2014-4633)10.2172/1177077 ↗
61. Mattsson T, Mattsson A (2002) Calculating the vacancy formation energy in metals: Pt, Pd, and Mo. Phys Rev B 66(21):214110. doi: 10.1103/PhysRevB.66.21411010.1103/PhysRevB.66.214110 ↗
62. Smith CJ (ed) (1976) Smithells metals reference book, 5th edn. Butterworths, London
63. Ashcroft NW, Mermin ND (1976) Solid state physics. Holt, Rinehart and Winston, New York
64. Simmons G, Wang H (1971) Single Crystal elastic constants and calculated aggregate properties: a handbook. MIT Press, Cambridge
65. Murr L (1972) Temperature coefficient of twin-boundary energy: the determination of stacking-fault energy from the coherent twin-boundary energy in pure F.C.C. metals. Scr Metall 6(3):203–208. doi: 10.1016/0036-9748(72)90168-810.1016/0036-9748(72)90168-8 ↗
66. Balluffi R (1978) Vacancy defect mobilities and binding energies obtained from annealing studies. J Nucl Mater 69–70:240–263. doi: 10.1016/0022-3115(78)90247-710.1016/0022-3115(78)90247-7 ↗
67. Gallagher PCJ (1970) The influence of alloying, temperature, and related effects on the stacking fault energy. Metall Trans 1(9):2429–2461. doi: 10.1007/BF0303837010.1007/BF03038370 ↗
68. Skriver HL, Rosengaard NM (1992) Surface energy and work function of elemental metals. Phys Rev B 46(11):7157–7168. doi: 10.1103/PhysRevB.46.715710.1103/PhysRevB.46.7157 ↗