Facile synthesis SnO2 nanoparticle-modified Ti3C2 MXene nanocomposites for enhanced lithium storage application
Source abstract
Abstract
SnO2 nanoparticle-modified Ti3C2 MXene (SnO2–Ti3C2) nanocomposites have been synthesized via hydrothermal method and subsequently used as anode material for lithium-ion batteries (LIBs) with enhanced electrochemical performance. The results of the microstructure analysis indicate that the introduction of SnO2 nanoparticles enlarged the d-spacing of Ti3C2 layers and increased the Li+ storage. Meanwhile, SnO2 nanoparticles improve the electrochemical performance based on the alloying mechanism. Electrochemical results reveal that SnO2–Ti3C2 nanocomposites can greatly improve the reversible capacity compared with pure Ti3C2Tx particles. Remarkably, SnO2–Ti3C2 nanocomposites show outstanding initial capacity of 1030.1 mAh g−1 at 100 mA g−1, and the capacity can remain about 360 mAh g−1 after 200 cycles. The SnO2–Ti3C2 nanocomposites demonstrate a stable cycle performance and high reversible capacity for lithium storage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advancements in Battery Materials · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Armand M, Tarascon JM (2008) Build better batteries. Nature 451:652–65710.1038/451652a ↗
2. Xu LL, Bian SW, Song KL (2014) Graphene sheets decorated with ZnO [3] nanoparticles as anode materials for lithium ion batteries. J Mater Sci 49:6217–6224. doi: 10.1007/s10853-014-8346-510.1007/s10853-014-8346-5 ↗
3. Xu G, Sun Y, Rohan R et al (2014) A lithium poly (pyromellitic acid borate) gel electrolyte membrane for lithium-ion batteries. J Mater Sci 49:6111–6117. doi: 10.1007/s10853-014-8341-x10.1007/s10853-014-8341-x ↗
4. Liu H (2014) Carbon nanotubes anchored with SnO2 nanosheets as anode for enhanced Li-ion storage. J Mater Sci: Mater Electron 25:3353–3357. doi: 10.1007/s10854-014-2025-910.1007/s10854-014-2025-9 ↗
5. Wu T, Tu F, Liu S et al (2014) MnO nanorods on graphene as an anode material for high capacity lithium ion batteries. J Mater Sci 49:1861–1867. doi: 10.1007/s10853-013-7874-810.1007/s10853-013-7874-8 ↗
6. Badi N (2016) Lithium-ion battery anodes of highly dispersed carbon nanotubes, graphene nanoplatelets, and carbon nanofibers. J Mater Sci Mater Electron 1–5. doi:10.1007/s10854-016-5119-810.1007/s10854-016-5119-8 ↗
7. Yu YX (2013) Graphenylene: a promising anode material for lithium-ion batteries with high mobility and storage. J Mater Chem A 1(43):13559–1356610.1039/c3ta12639k ↗
8. Yu YX (2013) Can all nitrogen-doped defects improve the performance of graphene anode materials for lithium-ion batteries? Phys Chem Chem Phys 15(39):16819–1682710.1039/c3cp51689j ↗
9. Tang Q, Zhou Z, Chen Z (2012) Single-layer [Cu2Br(IN)2]n coordination polymer (CP): electronic and magnetic properties, and implication for molecular sensors. J Phys Chem C 116(6):4119–412510.1021/jp211779w ↗
10. Tang Q, Zhou Z, Chen Z (2011) Molecular charge transfer: a simple and effective route to engineer the band structures of bn nanosheets and nanoribbons. J Phys Chem C 115(38):18531–1853710.1021/jp2067205 ↗
11. Chen W, Li Y, Yu G et al (2010) Hydrogenation: a simple approach to realize semiconductor half-metal-metal transition in boron nitride nanoribbons. J Am Chem Soc 132(5):1699–170510.1021/ja908475v ↗
12. Tang Q, Cui Y, Li Y et al (2011) How do surface and edge effects alter the electronic properties of GaN nanoribbons? J Phys Chem C 115(5):1724–173110.1021/jp109829c ↗
13. Li Y, Zhou Z, Zhang S et al (2008) MoS2 nanoribbons: high stability and unusual electronic and magnetic properties. J Am Chem Soc 130(49):16739–1674410.1021/ja805545x ↗
14. Li Y, Wu D, Zhou Z et al (2012) Enhanced Li adsorption and diffusion on MoS2 zigzag nanoribbons by edge effects: a computational study. J Phys Chem Lett 3(16):2221–222710.1021/jz300792n ↗
15. Tang Q, Li F, Zhou Z et al (2011) Versatile electronic and magnetic properties of corrugated V2O5 two-dimensional crystal and its derived one-dimensional nanoribbons: a computational exploration. J Phys Chem C 115(24):11983–1199010.1021/jp204174p ↗
16. Tang Q, Li F, Zhou Z et al (2010) Tuning electronic and magnetic properties of wurtzite ZnO nanosheets by surface hydrogenation. ACS Appl Mater Interfaces 2(8):2442–244710.1021/am100467j ↗
17. Li Y, Li F, Zhou Z et al (2010) SiC2 silagraphene and its one-dimensional derivatives: where planar tetra coordinate silicon happens. J Am Chem Soc 133(4):900–90810.1021/ja107711m ↗
18. Naguib M, Mochalin VN, Barsoum MW et al (2014) 25th anniversary article: MXenes: a new family of two-dimensional materials. Adv Mater 26(7):992–100510.1002/adma.201304138 ↗
19. Ali A, Belaidi A, Ali S et al (2016) Transparent and conductive Ti3C2Tx (MXene) thin film fabrication by electro hydrodynamic atomization technique. J Mater Sci Mater Electron 27:5440–5445. doi: 10.1007/s10854-016-4447-z10.1007/s10854-016-4447-z ↗
20. Tang Q, Zhou Z, Shen PW (2012) Are MXenes promising anode materials for Li ion batteries? Computational studies on electronic properties and Li storage capability of Ti3C2 and Ti3C2X2 (X = F, OH) monolayer. J Am Chem Soc 134:16909–1691610.1021/ja308463r ↗
21. Sun D, Wang M, Li Z et al (2014) Two-dimensional Ti3C2 as anode material for Li-ion batteries. Electrochem Commun 47(10):80–8310.1016/j.elecom.2014.07.026 ↗
22. Chen Y, Song B, Chen R et al (2014) A study of the superior electrochemical performance of 3 nm SnO2 nanoparticles supported by graphene. J Mater Chem A 2(16):5688–569510.1039/C3TA14745B ↗
23. Idota Y, Kubota T, Matsufuji A et al (1997) Tin-based amorphous oxide: a high-capacity lithium-ion-storage material. Science 276(5317):1395–139710.1126/science.276.5317.1395 ↗
24. Sun X, Huang Y, Zong M et al (2016) Preparation of porous SnO2/ZnO nanotubes via a single spinneret electrospinning technique as anodes for lithium ion batteries. J Mater Sci Mater Electron 27:2682–2686. doi: 10.1007/s10854-015-4077-x10.1007/s10854-015-4077-x ↗
25. Shi J, Wang Z, Fu YQ (2016) Density functional theory study of diffusion of lithium in Li–Sn alloys. J Mater Sci 51:3271–3276. doi: 10.1007/s10853-015-9639-z10.1007/s10853-015-9639-z ↗
26. Zhu YG, Wang Y, Xie J et al (2015) Effects of graphene oxide function groups on SnO2/graphene nanocomposites for lithium storage application. Electrochimica Acta 154:338–34410.1016/j.electacta.2014.12.065 ↗
27. Wu G, Wu M, Wang D et al (2014) A facile method for in situ, synthesis of SnO2/graphene as a high performance anode material for lithium-ion batteries. Appl Surf Sci 315(1):400–40610.1016/j.apsusc.2014.07.188 ↗
28. Wang F, Yang CH, Duan CY et al (2015) An organ-like titanium carbide material (MXene) with multilayer structure encapsulating hemoglobin for a mediator-free biosensor. J Electrochem Soc 162(1):B16–B2110.1149/2.0371501jes ↗
29. Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(2):309–31910.1021/ja01269a023 ↗
30. Naguib M, Come J, Dyatkin B et al (2012) MXene: a promising transition metal carbide anode for lithium-ion batteries. Electrochem Commun 16(1):61–6410.1016/j.elecom.2012.01.002 ↗
31. Come J, Naguib M, Rozier P et al (2012) A non-aqueous asymmetric cell with a Ti2C-based two-dimensional negative electrode. J Electrochem Soc 159(8):1005–101010.1149/2.003208jes ↗
32. Kottegoda IRM, Idris NH, Lu L et al (2011) Synthesis and characterization of graphene–nickel oxide nanostructures for fast charge–discharge application. Electrochim Acta 56(16):5815–582210.1016/j.electacta.2011.03.143 ↗
33. Yao J, Shen X, Wang B et al (2009) In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries. Electrochem Commun 11(10):1849–185210.1016/j.elecom.2009.07.035 ↗
34. Zhu X, Zhu Y, Murali S et al (2011) Reduced graphene oxide/tin oxide composite as an enhanced anode material for lithium ion batteries prepared by homogenous coprecipitation. J Power Sources 196(15):6473–647710.1016/j.jpowsour.2011.04.015 ↗
35. Li H, Huang X, Chen L (1999) Electrochemical impedance spectroscopy study of SnO and nano-SnO anodes in lithium rechargeable batteries. J Power Sources 81:340–34510.1016/S0378-7753(99)00214-1 ↗
36. Yu YX (2016) Prediction of mobility, enhanced storage capacity, and volume change during sodiation on interlayer-expanded functionalized Ti3C2 MXene anode materials for sodium-ion batteries. J Phys Chem C 120(10):5288–529610.1021/acs.jpcc.5b10366 ↗
37. Mashtalir O, Naguib M, Mochalin VN et al (2013) Intercalation and delamination of layered carbides and carbonitrides. Nat Commun 4(2):216–219
38. Luo JM, Tao XY, Zhang J, Xia Y, Huang H, Zhang LY, Gan YP, Liang C, Zhang WK (2016) Sn4+ ion decorated highly conductive Ti3C2 MXene: promising lithium-ion anodes with enhanced volumetric capacity and cyclic performance. ACS Nano 10:2491–249910.1021/acsnano.5b07333 ↗
39. Mashtalir O, Lukatskaya MR, Zhao MQ et al (2015) Amine-assisted delamination of Nb2C MXene for Li-ion energy storage devices. Adv Mater 27(23):3501–350610.1002/adma.201500604 ↗
40. Lin ZY, Sun DF, Huang Q et al (2015) Carbon nanofiber bridged two-dimensional titanium carbide as a superior anode for lithium-ion batteries. J Mater Chem A 3(27):14096–1410010.1039/C5TA01855B ↗