A glimpse on all-solid-state Li-ion battery (ASSLIB) performance based on novel solid polymer electrolytes: a topical review
Source abstract
Abstract
All-solid-state batteries are swiftly gaining the attention of the research community owing to their widespread applications in electric vehicles, digital electronics, portable appliances, etc. A battery comprises three components: cathode, anode and electrolyte. An electrolyte is the heart of the battery and plays a crucial role in the overall performance of the battery. In order to make the review more focused, all-solid-state Li-ion batteries (ASSLIBs) have been considered. This review covers the architecture of ASSLIBs, advantages, and characteristics of the solid polymer electrolytes. The important preparation methods are summarized, followed by the characterizations for testing the suitability of electrolytes for solid-state batteries. The discussion is focused on the ‘state of the art’ in the field of solid-state batteries, device fabrication, and comparison in terms of capacity, energy density, and cyclic stability. In the last section, the ion conduction mechanism in different solid polymer electrolytes is discussed. Finally, it is tried to give a possible outlook for developing future hybrid and multifunctional electrolytes which can act as a bridge for developing solid-state batteries covering a broad range of applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Arya A, Sharma AL (2017) Insights into the use of polyethylene oxide in energy storage/conversion devices: a critical review. J Phys D Appl Phys 50(44):44300210.1088/1361-6463/aa8675 ↗
2. Croce F, Appetecchi GB, Persi L, Scrosati B (1998) Nanocomposite polymer electrolytes for lithium batteries. Nature 394(6692):456–45810.1038/28818 ↗
3. Agrawal RC, Pandey GP (2008) Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview. J Phys D Appl Phys 41(22):22300110.1088/0022-3727/41/22/223001 ↗
4. Armand M, Tarascon JM (2008) Building better batteries. Nature 451(7179):652–65710.1038/451652a ↗
5. Tarascon JM, Armand M (2011) Issues and challenges facing rechargeable lithium batteries. In: Materials for sustainable energy: a collection of peer-reviewed research and review articles from Nature Publishing Group, pp 171–17910.1142/9789814317665_0024 ↗
6. Whittingham MS (2004) Lithium batteries and cathode materials. Chem Rev 104(10):4271–430210.1021/cr020731c ↗
7. Scrosati B, Garche J (2010) Lithium batteries: status, prospects and future. J Power Sources 195(9):2419–243010.1016/j.jpowsour.2009.11.048 ↗
8. Gulzar U, Goriparti S, Miele E, Li T, Maidecchi G, Toma A, De Angelis F, Capiglia C, Zaccaria RP (2016) Next-generation textiles: from embedded supercapacitors to lithium ion batteries. J Mater Chem A 4(43):16771–1680010.1039/C6TA06437J ↗
9. Goodenough JB, Kim Y (2011) Challenges for rechargeable batteries. J Power Sources 22(3):587–603
10. Marom R, Amalraj SF, Leifer N, Jacob D, Aurbach D (2011) A review of advanced and practical lithium battery materials. J Mater Chem 21(27):9938–995410.1039/c0jm04225k ↗
11. Wu F, Yushin G (2017) Conversion cathodes for rechargeable lithium and lithium-ion batteries. Energy Environ Sci 10(2):435–45910.1039/C6EE02326F ↗
12. Croy JR, Abouimrane A, Zhang Z (2014) Next-generation lithium-ion batteries: the promise of near-term advancements, MRS Bulletin. MRS Bull 39(5):407–41510.1557/mrs.2014.84 ↗
13. Thackeray MM, Wolverton C, Isaacs ED (2012) Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries. Energy Environ Sci 5(7):7854–786310.1039/c2ee21892e ↗
14. Meyers RA (ed) (2012) Encyclopedia of sustainability science and technology, Chap. 2. Springer, New York
15. Jossen A (2006) Fundamentals of battery dynamics. J Power Sources 154(2):530–53810.1016/j.jpowsour.2005.10.041 ↗
16. Pritam, Arya A, Sharma AL (2019) Dielectric relaxations and transport properties parameter analysis of novel blended solid polymer electrolyte for sodium-ion rechargeable batteries. J Mater Sci 54(9):7131–7155. https://doi.org/10.1007/s10853-019-03381-310.1007/s10853-019-03381-3 ↗
17. Pritam, Arya A, Sharma AL (2019) Selection of best composition of Na+ ion conducting PEO-PEI blend solid polymer electrolyte based on structural, electrical, and dielectric spectroscopic analysis. Ionics 26:745–76610.1007/s11581-019-03245-5 ↗
18. Goodenough JB, Singh P (2015) Solid electrolytes in rechargeable electrochemical cells. J Electrochem Soc 162(14):A2387–A239210.1149/2.0021514jes ↗
19. Wu B, Wang S, Evans WJ, Deng DZ, Yang J, Xiao J (2016) Interfacial behaviours between lithium ion conductors and electrode materials in various battery systems. J Mater Chem A 4(40):15266–1528010.1039/C6TA05439K ↗
20. Bhattacharya M (2016) Polymer nanocomposites—a comparison between carbon nanotubes, graphene, and clay as nanofillers. Materials 9(4):26210.3390/ma9040262 ↗
21. Xue Z, He D, Xie X (2015) Poly (ethylene oxide)-based electrolytes for lithium-ion batteries. J Mater Chem A 3(38):19218–1925310.1039/C5TA03471J ↗
22. Jiang Y, Yan X, Ma Z, Mei P, Xiao W, You Q, Zhang Y (2018) Development of the PEO based solid polymer electrolytes for all-solid state lithium ion batteries. Polymers 10(11):123710.3390/polym10111237 ↗
23. Saito Y, Morimura W, Kuse S, Kuratani R, Nishikawa S (2017) Influence of the morphological characteristics of separator membranes on ionic mobility in lithium secondary batteries. J Phys Chem C 121(5):2512–252010.1021/acs.jpcc.6b10543 ↗
24. Xia L, Yu L, Hu D, Chen GZ (2017) Electrolytes for electrochemical energy storage. Mater Chem Front 1(4):584–61810.1039/C6QM00169F ↗
25. Cheng XB, Zhao CZ, Yao YX, Liu H, Zhang Q (2019) Recent advances in energy chemistry between solid-state electrolyte and safe lithium-metal anodes. Chem 5:74–9610.1016/j.chempr.2018.12.002 ↗
26. Yue J, Ma J, Zhang J, Zhao J, Dong S, Liu Z, Cui G, Chen L (2016) All solid-state polymer electrolytes for high-performance lithium ion batteries. Energy Storage Mater 5:139–16410.1016/j.ensm.2016.07.003 ↗
27. Dirican M, Yan C, Zhu P, Zhang X (2019) Composite solid electrolytes for all-solid-state lithium batteries. Mater Sci Eng R 136:27–4610.1016/j.mser.2018.10.004 ↗
28. Meesala Y, Jena A, Chang H, Liu RS (2017) Recent advancements in Li-ion conductors for all-solid-state Li ion batteries. ACS Energy Lett 2:2734–275110.1021/acsenergylett.7b00849 ↗
29. Schnell J, Günther T, Knoche T, Vieider C, Köhler L, Just A, Reinhart G (2018) All-solid-state lithium-ion and lithium metal batteries–paving the way to large-scale production. J Power Sources 382:160–17510.1016/j.jpowsour.2018.02.062 ↗
30. Tong B, Wang J, Liu Z, Ma L, Zhou Z, Peng Z (2018) Identifying compatibility of lithium salts with LiFePO4 cathode using a symmetric cell. J Power Sources 384:80–8510.1016/j.jpowsour.2018.02.076 ↗
31. Famprikis T, Canepa P, Dawson JA, Islam MS, Masquelier C (2019) Fundamentals of inorganic solid-state electrolytes for batteries. Nat Mater 18:1278–129110.1038/s41563-019-0431-3 ↗
32. Xia S, Wu X, Zhang Z, Cui Y, Liu W (2019) Practical challenges and future perspectives of all-solid-state lithium-metal batteries. Chem 5(4):753–78510.1016/j.chempr.2018.11.013 ↗
33. Kerman K, Luntz A, Viswanathan V, Chiang YM, Chen Z (2017) Review—Practical challenges hindering the development of solid state Li ion batteries. J Electrochem Soc 164(7):A1731–A174410.1149/2.1571707jes ↗
34. Arya A, Sharma AL (2017) Polymer electrolytes for lithium ion batteries: a critical study. Ionics 23(3):497–54010.1007/s11581-016-1908-6 ↗
35. Arya A, Sharma AL (2019) Electrolyte for energy storage/conversion (Li+, Na+, Mg2+) devices based on PVC and their associated polymer: a comprehensive review. J Solid State Electrochem 23(4):997–105910.1007/s10008-019-04203-x ↗
36. Arya A, Sharma AL (2020) Polymer Nanocomposites: synthesis and characterization. In: Wiesner M, Bottero JY (eds) Environmental nanotechnology, vol 4. Springer, Cham, pp 265–315
37. Xu K, Wang C (2016) Batteries: widening voltage windows. Nat Energy 1(10):1616110.1038/nenergy.2016.161 ↗
38. Kong L, Li C, Jiang J, Pecht MG (2018) Li-ion battery fire hazards and safety strategies. Energies 11(9):219110.3390/en11092191 ↗
39. Liu K, Liu Y, Lin D, Pei A, Cui Y (2018) Materials for lithium-ion battery safety. Sci Adv 4(6):eaas982010.1126/sciadv.aas9820 ↗
40. Wang Q, Ping P, Zhao X, Chu G, Sun J, Chen C (2012) Thermal runaway caused fire and explosion of lithium ion battery. J Power Sources 208:210–22410.1016/j.jpowsour.2012.02.038 ↗
41. Arya A, Sharma AL (2018) Structural, microstructural and electrochemical properties of dispersed-type polymer nanocomposite films. J Phys D Appl Phys 51(4):04550410.1088/1361-6463/aa9f69 ↗
42. Arya A, Sharma AL (2018) Structural, electrical properties and dielectric relaxations in Na+-ion-conducting solid polymer electrolyte. J Phys Condens Matter 30(16):16540210.1088/1361-648X/aab466 ↗
43. Petronico A, Moneypenny TP, Nicolau BG, Moore JS, Nuzzo RG, Gewirth AA (2018) Solid-liquid lithium electrolyte nanocomposites derived from porous molecular cages. J Am Chem Soc 24:7504–750910.1021/jacs.8b00886 ↗
44. Rosso M, Brissot C, Teyssot A, Dollé M, Sannier L, Tarascon JM, Bouchet R, Lascaud S (2006) Dendrite short-circuit and fuse effect on Li/polymer/Li cells. Electrochim Acta 51(25):5334–534010.1016/j.electacta.2006.02.004 ↗
45. Wu B, Liu Q, Mu D, Xu H, Wang L, Shi L, Gai L, Wu F (2016) Suppression of lithium dendrite growth by introducing a low reduction potential complex cation in the electrolyte. RSC Adv 6(57):51738–5174610.1039/C6RA09480E ↗
46. Bai P, Li J, Brushett FR, Bazant MZ (2016) Transition of lithium growth mechanisms in liquid electrolytes. Energy Environ Sci 9(10):3221–322910.1039/C6EE01674J ↗
47. Ilott AJ, Mohammadi M, Chang HJ, Grey CP, Jerschow A (2016) Real-time 3D imaging of microstructure growth in battery cells using indirect MRI. Proc Natl Acad Sci USA 113(39):10779–1078410.1073/pnas.1607903113 ↗
48. Mehdi BL, Stevens A, Qian J, Park C, Xu W, Henderson WA, Zhang JG, Mueller KT, Browning ND (2016) The impact of Li grain size on coulombic efficiency in Li batteries. Sci Rep 6:3426710.1038/srep34267 ↗
49. Ma J, Chen B, Wang L, Cui G (2018) Progress and prospect on failure mechanisms of solid-state lithium batteries. J Power Sources 392:94–11510.1016/j.jpowsour.2018.04.055 ↗
50. Brissot C, Rosso M, Chazalviel JN, Baudry P, Lascaud S (1998) In situ study of dendritic growth in lithium/PEO-salt/lithium cells. Electrochim Acta 43:1569–157410.1016/S0013-4686(97)10055-X ↗
51. Brissot C, Rosso M, Chazalviel JN (1999) Dendritic growth mechanisms in lithium/polymer cells. J Power Sources 81:925–92910.1016/S0378-7753(98)00242-0 ↗
52. Dollé M, Sannier L, Beaudoin B (2002) Live scanning electron microscope observations of dendritic growth in lithium/polymer cells. Electrochem Solid-state Lett 5:A286–A28910.1149/1.1519970 ↗
53. Rosso M, Brissot C, Teyssot A, Dollé M, Sannier L, Tarascon JM, Bouchet R, Lascaud S (2006) Dendrite short-circuit and fuse effect on Li/polymer/Li cells. Electrochim Acta 51:5334–534010.1016/j.electacta.2006.02.004 ↗
54. Harry KJ, Hallinan DT, Parkinson DY, MacDowell AA, Balsara NP (2014) Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes. Nat Mater 13:69–7310.1038/nmat3793 ↗
55. Yang L, Wang Z, Feng Y, Tan R, Zuo Y, Gao R, Zhao Y, Han L, Wang Z, Pan F (2017) Flexible composite solid electrolyte facilitating highly stable “soft contacting” Li–electrolyte interface for solid state lithium-ion batteries. Adv Energy Mater 7:170143710.1002/aenm.201701437 ↗
56. Wang C, Yang Y, Liu X, Zhong H, Xu H, Xu Z, Shao H, Ding F (2017) Suppression of lithium dendrite formation by using LAGP-PEO (LiTFSI) composite solid electrolyte and lithium metal anode modified by PEO (LiTFSI) in all-solid-state lithium batteries. ACS Appl Mater Interfaces 9:13694–1370210.1021/acsami.7b00336 ↗
57. Wu H, Zhuo D, Kong D, Cui Y (2014) Improving battery safety by early detection of internal shorting with a bifunctional separator. Nat Commun 5:519310.1038/ncomms6193 ↗
58. Li W, Yao H, Yan K, Zheng G, Liang Z, Chiang YM, Cui Y (2015) The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth. Nat Commun 6:743610.1038/ncomms8436 ↗
59. Zhao CZ, Zhang XQ, Cheng XB, Zhang R, Xu R, Chen PY, Peng HJ, Huang JQ, Zhang Q (2017) An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes. Proc Natl Acad Sci USA 114(42):11069–1107410.1073/pnas.1708489114 ↗
60. Kim SH, Choi KH, Cho SJ, Kil EH, Lee SY (2013) Mechanically compliant and lithium dendrite growth-suppressing composite polymer electrolytes for flexible lithium-ion batteries. J Mater Chem A 1(16):4949–495510.1039/c3ta10612h ↗
61. Luo W, Zhou L, Fu K, Yang Z, Wan J, Manno M, Yao Y, Zhu H, Yang B, Hu L (2015) A thermally conductive separator for stable Li metal anodes. Nano Lett 15(9):6149–615410.1021/acs.nanolett.5b02432 ↗
62. Wu JY, Ling SG, Yang Q, Li H, Xu XX, Chen LQ (2016) Forming solid electrolyte interphase in situ in an ionic conducting Li1.5Al0.5Ge1.5(PO4) 3-polypropylene (PP) based separator for Li-ion batteries. Chin Phys B 25:7820410.1088/1674-1056/25/7/078204 ↗
63. Zhao CZ, Chen PY, Zhang R, Chen X, Li BQ, Zhang XQ, Cheng XB, Zhang Q (2018) An ion redistributor for dendrite-free lithium metal anodes. Sci Adv 4(11):eaat344610.1126/sciadv.aat3446 ↗
64. Hendricks C, Williard N, Mathew S, Pecht M (2015) A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries. J Power Sources 297:113–12010.1016/j.jpowsour.2015.07.100 ↗
65. Niitani T, Shimada M, Kawamura K, Kanamura K (2005) Characteristics of new-type solid polymer electrolyte controlling nano-structure. J Power Sources 146(1–2):386–39010.1016/j.jpowsour.2005.03.102 ↗
66. Khan IM, Fish D, Delaviz Y, Smid J (1989) ABA triblock comb copolymers with oligo (oxyethylene) side chains as matrix for ion transport. Macromol Chem Phys 190(5):1069–107810.1002/macp.1989.021900515 ↗
67. Kamigaito M, Ando T, Sawamoto M (2001) Metal-catalyzed living radical polymerization. Chem Rev 101(12):3689–374610.1021/cr9901182 ↗
68. Holmberg S, Holmlund P, Wilén CE, Kallio T, Sundholm G, Sundholm F (2002) Synthesis of proton-conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques. J Polym Sci Part A Polym Chem 40(4):591–60010.1002/pola.10146 ↗
69. Grewal MS, Tanaka M, Kawakami H (2019) Bifunctional poly (ethylene glycol) based crosslinked network polymers as electrolytes for all-solid-state lithium ion batteries. Polym Int 68(4):684–69310.1002/pi.5750 ↗
70. Porcarelli L, Gerbaldi C, Bella F, Nair JR (2016) Super soft all-ethylene oxide polymer electrolyte for safe all-solid lithium batteries. Sci Rep 6:1989210.1038/srep19892 ↗
71. Cui Y, Liang X, Chai J, Cui Z, Wang Q, He W, Feng J (2017) High performance solid polymer electrolytes for rechargeable batteries: a self-catalyzed strategy toward facile synthesis. Adv Sci 4(11):170017410.1002/advs.201700174 ↗
72. Huang S, Cui Z, Qiao L, Xu G, Zhang J, Tang K, Cui G (2019) An in situ polymerized solid polymer electrolyte enables excellent interfacial compatibility in lithium batteries. Electrochim Acta 299:820–82710.1016/j.electacta.2019.01.039 ↗
73. Nair JR, Colò F, Kazzazi A, Moreno M, Bresser D, Lin R, Appetecchi GB (2019) Room temperature ionic liquid (RTIL)-based electrolyte cocktails for safe, high working potential Li-based polymer batteries. J Power Sources 412:398–40710.1016/j.jpowsour.2018.11.061 ↗
74. Nair JR, Destro M, Bella F, Appetecchi GB, Gerbaldi C (2016) Thermally cured semi-interpenetrating electrolyte networks (s-IPN) for safe and aging-resistant secondary lithium polymer batteries. J Power Sources 306:258–26710.1016/j.jpowsour.2015.12.001 ↗
75. Nair JR, Porcarelli L, Bella F, Gerbaldi C (2015) Newly elaborated multipurpose polymer electrolyte encompassing RTILs for smart energy-efficient devices. ACS Appl Mater Interfaces 7:12961–1297110.1021/acsami.5b02729 ↗
76. Falco M, Simari C, Ferrara C, Nair JR, Meligrana G, Bella F, Gerbaldi C (2019) Understanding the effect of UV-induced crosslinking on the physico-chemical properties of highly performing PEO/LiTFSI-based polymer electrolytes. Langmuir 35:8210–8219
77. Nair JR, Shaji I, Ehteshami N, Thum A, Diddens D, Heuer A, Winter M (2019) Solid polymer electrolytes for lithium metal battery via thermally induced cationic ring-opening polymerization (CROP) with an insight into the reaction mechanism. Chem Mater 31(9):3118–313310.1021/acs.chemmater.8b04172 ↗
78. Nuyken O, Pask S (2013) Ring-opening polymerization—an introductory review. Polymers 5(2):361–40310.3390/polym5020361 ↗
79. Ehteshami N, Eguia-Barrio A, de Meatza I, Porcher W, Paillard E (2018) Adiponitrile-based electrolytes for high voltage, graphite-based Li-ion battery. J Power Sources 397:52–5810.1016/j.jpowsour.2018.07.004 ↗
80. Zaheer M, Xu H, Wang B, Li L, Deng Y (2020) An in situ polymerized comb-like PLA/PEG-based solid polymer electrolyte for lithium metal batteries. J Electrochem Soc 167(7):07050410.1149/2.0042007JES ↗
81. Arya A, Sharma AL (2018) Effect of salt concentration on dielectric properties of Li-ion conducting blend polymer electrolytes. J Mater Sci Mater Electron 29(20):17903–1792010.1007/s10854-018-9905-3 ↗
82. Arya A, Saykar Nilesh G, Sharma AL (2019) Impact of shape (nanofiller vs. nanorod) of TiO2 nanoparticle on free-standing solid polymeric separator for energy storage/conversion devices. J Appl Polym Sci 136(16):4736110.1002/app.47361 ↗
83. Zhang X, Xie J, Shi F, Lin D, Liu Y, Liu W, Pei A, Gong Y, Wang H, Liu K, Xiang Y, Cui Y (2018) Vertically aligned and continuous nanoscale ceramic-polymer interfaces in composite solid polymer electrolytes for enhanced ionic conductivity. Nano Lett 18(6):3829–383810.1021/acs.nanolett.8b01111 ↗
84. Liang X, Han D, Wang Y, Lan L, Mao J (2018) Preparation and performance study of a PVDF-LATP ceramic composite polymer electrolyte membrane for solid-state batteries. RSC Adv 8(71):40498–4050410.1039/C8RA08436J ↗
85. Young WS, Kuan WF, Epps TH (2014) Block copolymer electrolytes for rechargeable lithium batteries. J Polym Sci Part B Polym Phys 52(1):1–1610.1002/polb.23404 ↗
86. Giacomelli C, Schmidt V, Aissou K, Borsali R (2010) Block copolymer systems: from single chain to self-assembled nanostructures. Langmuir 26(20):15734–1574410.1021/la100641j ↗
87. Young WS, Epps TH (2012) Ionic conductivities of block copolymer electrolytes with various conducting pathways: Sample preparation and processing considerations. Macromolecules 45(11):4689–469710.1021/ma300362f ↗
88. Cho BK, Jain A, Gruner SM, Wiesner U (2004) Mesophase structure-mechanical and ionic transport correlations in extended amphiphilic dendrons. Science 305(5690):1598–160110.1126/science.1100872 ↗
89. Mindemark J, Lacey MJ, Bowden T, Brandell D (2018) Beyond PEO—alternative host materials for Li + -conducting solid polymer electrolytes. Prog Polym Sci 81:114–14310.1016/j.progpolymsci.2017.12.004 ↗
90. Zhang J, Yang J, Dong T, Zhang M, Chai J, Dong S, Cui G (2018) Aliphatic polycarbonate-based solid-state polymer electrolytes for advanced lithium batteries: advances and perspective. Small 14(36):180082110.1002/smll.201800821 ↗
91. Ren S, Chang H, He L, Dang X, Fang Y, Zhang L, Li H, Hu Y, Lin Y (2013) Preparation and ionic conductive properties of all-solid polymer electrolytes based on multiarm star block polymers. J Appl Polym Sci 129(3):1131–114210.1002/app.38798 ↗
92. Zhang J, Ma C, Liu J, Chen L, Pan A, Wei W (2016) Solid polymer electrolyte membranes based on organic/inorganic nanocomposites with star-shaped structure for high performance lithium ion battery. J Membr Sci 509:138–14810.1016/j.memsci.2016.02.049 ↗
93. Xu H, Wang A, Liu X, Feng D, Wang S, Chen J, Zhang L (2018) A new fluorine-containing star-branched polymer as electrolyte for all-solid-state lithium-ion batteries. Polymer 146:249–25510.1016/j.polymer.2018.05.045 ↗
94. Li Y, Zhang W, Dou Q, Wong KW, Ng KM (2019) Li7La3Zr2O12 ceramic nanofiber-incorporated composite polymer electrolytes for lithium metal batteries. J Mater Chem A 7(7):3391–339810.1039/C8TA11449H ↗
95. Zhang X, Ji L, Toprakci O, Liang Y, Alcoutlabi M (2011) Electrospun nanofiber-based anodes, cathodes, and separators for advanced lithium-ion batteries. Polym Rev 51(3):239–26410.1080/15583724.2011.593390 ↗
96. Liu W, Liu N, Sun J, Hsu PC, Li Y, Lee HW, Cui Y (2015) Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers. Nano Lett 15(4):2740–274510.1021/acs.nanolett.5b00600 ↗
97. Zhu P, Yan C, Dirican M, Zhu J, Zang J, Selvan RK, Chung CC, Jia H, Li Y, Kiyak Y, Wu N, Zhang X (2018) Li0.33La0.557TiO3 ceramic nanofiber-enhanced polyethylene oxide-based composite polymer electrolytes for all-solid-state lithium batteries. J Mater Chem A 6(10):4279–428510.1039/C7TA10517G ↗
98. Lu Q, He YB, Yu Q, Li B, Kaneti YV, Yao Y, Kang F, Yang QH (2017) Dendrite-free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte. Adv Mater 29(13):160446010.1002/adma.201604460 ↗
99. Kim GT, Appetecchi GB, Carewska M, Joost M, Balducci A, Winter M, Passerini S (2010) UV cross-linked, lithium-conducting ternary polymer electrolytes containing ionic liquids. J Power Sources 195(18):6130–613710.1016/j.jpowsour.2009.10.079 ↗
100. Lin YC, Ito K, Yokoyama H (2018) Solid polymer electrolyte based on crosslinked polyrotaxane. Polymer 136:121–12710.1016/j.polymer.2017.12.046 ↗