Grain growth during selective laser melting of a Co–Cr–Mo alloy
Source abstract
Abstract
Modes of solidification during selective laser melting (SLM) of metallic alloys, including Co–Cr–Mo alloy, are still not fully understood. This understanding is important in SLM to achieve acceptable properties and part reliability. Using a typical SLM condition and Co–Cr–Mo alloys, microstructures of tracks were characterized in this study. As is commonly observed, solidification starts from epitaxial growth in the boundary of melt track. Cells were found to grow immediately from the melt boundary, without forming a planar zone. This is explained by the growth velocity being sufficiently high that planar growth condition is not favorable. Epitaxial growth has been found to have two possible crystallographic orientations of : either a continuation of the same orientation as in previous track or a change of 90° to another orientation. The selection is in response to scan direction-dependent heat flux direction. The crystal growth direction in relation to heat flux direction also explains that a grain (a group of cells) after epitaxial growth could either stop or continue to the track surface. No equiaxed grains were observed, and this can be explained by the continuation of cellular growth in the whole track.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Milošev I (2012) Volume 55 of Modern Aspects of Electrochemistry, Chapter, 1. In: Djokić SS (ed) Biomedical Applications. Springer, Berlin
2. Koutsoukis T, Zinelis S, Eliades G, Al-Wazzan K, Al Rifaily M, Al Jabbari YS (2015) Selective laser melting technique of Co-Cr dental alloys: a review of structure and properties and comparative analysis with other available techniques. J Prosthodont 24:303–31210.1111/jopr.12268 ↗
3. Zeng L, Zhang Y, Liu Z, Wei B (2015) Effects of repeated firing on the marginal accuracy of Co-Cr copings fabricated by selective laser melting. J Prosthet Dent 113:135–13910.1016/j.prosdent.2014.09.004 ↗
4. Huang Z, Zhang L, Zhu J, Zhang X (2015) Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology. J Prosthet Dent 113:623–62710.1016/j.prosdent.2014.10.012 ↗
5. Nesse H, Ulstein DMÅ, Vaage MM, Øilo M (2015) Internal and marginal fit of cobalt-chromium fixed dental prostheses fabricated with 3 different techniques. J Prosthet Dent 114:686–69210.1016/j.prosdent.2015.05.007 ↗
6. Ren XW, Zeng L, Wei ZM, Xin XZ, Wei B (2016) Effects of multiple firings on metal-ceramic bond strength of Co–Cr fabricated by selective laser melting. J Prosthet Dent 115:109–11410.1016/j.prosdent.2015.03.023 ↗
7. Lu Y, Zhao C, Ren L, Guo S, Gan Y, Yang C, Wu S, Lin J, Huang T, Yang K, Lin J (2016) Preliminary assessment of metal-porcelain bonding strength of CoCrW alloy after 3 wt% Cu addition. Mater Sci Eng C 63:37–4510.1016/j.msec.2016.02.057 ↗
8. Hedberg YS, Qian B, Shen Z, Virtanen S, Wallinder IO (2014) In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. Dent Mater 30:525–53410.1016/j.dental.2014.02.008 ↗
9. Yang X, Xiang N, Wei B (2014) Effect of fluoride content on ion release from cast and selective laser melding-processed Co-Cr-Mo alloys. J Prosthet Dent 112:1212–121610.1016/j.prosdent.2013.12.022 ↗
10. Lu Y, Wu S, Gan Y, Li J, Zhao C, Zhuo D, Lin J (2015) Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application. Mater Sci Eng 49:517–52510.1016/j.msec.2015.01.023 ↗
11. Lu Y, Wu S, Gan Y, Zhang S, Guo S, Lina J, Lin J (2016) Microstructure, mechanical property and metal release of as-SLM CoCrW alloy under different solution treatment conditions. J Mech Behav Biomed Mater 55:179–19010.1016/j.jmbbm.2015.10.019 ↗
12. Qian B, Saeidi K, Kvetkova L, Lofaj F, Xiao C, Shen Z (2015) Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting. Dent Mater 31:1435–144410.1016/j.dental.2015.09.003 ↗
13. Kajima Y, Takaichi A, Nakamoto T, Kimura T, Yogo Y, Ashida M, Daoi H, Nomura N, Takahashi H, Hanawa T, Wakabayashi N (2016) Fatigue strength of Co–Cr–Mo alloy clasps prepared by selective laser melting. J Mech Behav Biomed Mater 59:446–45810.1016/j.jmbbm.2016.02.032 ↗
14. Haan J, Asseln M, Zivcec M, Eschweiler J, Radermacher R, Broeckmann C (2015) Effect of subsequent hot isostatic pressing on mechanical properties of ASTM F75 alloy produced by selective laser melting. Powder Metall 58:161–16510.1179/0032589915Z.000000000236 ↗
15. Girardin E, Barucca G, Mengucci P, Fiori F, Bassoli E, Gatto A, Iuliano L, Rutkowski B (2016) Biomedical Co-Cr-Mo components produced by direct metal laser sintering. Mater Today Proc 3:889–89710.1016/j.matpr.2016.02.022 ↗
16. Mengucci P, Barucca G, Gatto A, Bassoli E, Denti L, Fiori F, Girardin P, Bastianoni B, Rutkowski B, Czyrska-Filemonowicz A (2016) Effects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy produced by laser sintering. J Mech Behav Biomed Mater 60:106–11710.1016/j.jmbbm.2015.12.045 ↗
17. Liverani E, Fortunato A, Leardini A, Belvedere C, Siegler S, Ceschini L, Ascari A (2016) Fabrication of Co–Cr–Mo endoprosthetic ankle devices by means of Selective Laser Melting (SLM). Mater Des 106:60–6810.1016/j.matdes.2016.05.083 ↗
18. Limmahakhun S, Oloyede A, Sitthiseripratip K, Xiao Y, Yan C (2017) Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction. Mater Des 114:633–641. doi: 10.1016/j.matdes.2016.11.09010.1016/j.matdes.2016.11.090 ↗
19. Zhou X, Wang D, Liu X, Zhang D, Qu S, Ma J, London G, Shen Z, Liu W (2015) 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT. Acta Mater 98:1–1610.1016/j.actamat.2015.07.014 ↗
20. Zhou X, Li K, Zhang D, Liu X, Maa J, Liu W, Shen Z (2015) Textures formed in a CoCrMo alloy by selective laser melting. J Alloys Compd 631:153–16410.1016/j.jallcom.2015.01.096 ↗
21. Takaichi A, Suyalatu T, Nakamoto N, Joko N, Nomura Y, Tsutsumi S, Migita H, Doi S, Kurosu A, Chiba N, Wakabayashi Y, Igarashi Y, Hanawa T (2013) Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 21:67–7610.1016/j.jmbbm.2013.01.021 ↗
22. Kruth JP, Dadbakhsh S, Vrancken B, Kempen K, Vleugels J, Humbeeck JV (2016) Chapter 3 Additive manufacturing of metals via selective laser melting: process aspects and material developments. In: Srivatsan TS, Sudarshan TS (eds) Additive manufacturing: innovations, advances, and applications. Taylor & Francis Group, Boca Raton, pp 69–99
23. Basak A, Das S (2016) Epitaxy and microstructure evolution in metal additive manufacturing. Ann Rev Mat Res 46:125–14910.1146/annurev-matsci-070115-031728 ↗
24. Collins PC, Brice DA, Samimi P, Ghamarian I, Fraser HL (2016) Microstructural control of additively manufactured metallic materials. Ann Rev Mater Res 46:63–9110.1146/annurev-matsci-070115-031816 ↗
25. Cloots M, Uggowitzer PJ, Wegener K (2016) Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles. Mater Des 89:770–78410.1016/j.matdes.2015.10.027 ↗
26. Wang D, Song C, Yang Y, Bai Y (2016) Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts. Mater Des 100(2016):291–29910.1016/j.matdes.2016.03.111 ↗
27. Popovich VA, Borisov EV, Popovich AA, Sufuuarov VS, Masaylo DV, Alzina L (2017) Functionally graded Inconel 718 processed by additive manufacturing: crystallographic texture, anisotropy of microstructure and mechanical properties. Mater Des 114:441–449. doi: 10.1016/j.matdes.2016.10.07510.1016/j.matdes.2016.10.075 ↗
28. Kou S (2003) Weld metal solidification II: microstructure within grains in welding metallurgy, 2nd edn. Wiley, London, pp 199–215
29. Rajamaki P (2008) Fusion weld metal solidification: continuum from weld interface to centerline. Ph.D. thesis, Lappeenranta University of Technology, Finland
30. Casati R, Lemke J, Vedani M (2016) Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting. J Mater Sci Technol 32:738–744. doi: 10.1016/j.jmast2016.06.01610.1016/j.jmast2016.06.016 ↗
31. Casati R, Lemke JN, Tuissi A, Vedani M (2016) Aging behavior and mechanical performance of 18-Ni 300 steel processed by selective laser melting. Metals 6(9):218. doi: 10.3390/met609021810.3390/met6090218 ↗
32. Garibaldi M, Ashcroft I, Simonelli M, Hague R (2016) Metallurgy of high-silicon steel parts produced using selective laser melting. Acta Mater 110:207–21610.1016/j.actamat.2016.03.037 ↗
33. Chlebus E, Gruber K, Kuźnicka B, Kurzac J, Kurzynowski T (2015) Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting. Mater Sci Eng 639:647–65510.1016/j.msea.2015.05.035 ↗
34. Li S, Wei Q, Shi Y, Zhu Z, Zhang D (2015) Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting. J Mater Sci Technol 31:946–95210.1016/j.jmst.2014.09.020 ↗
35. Thijs L, Verhaeghe F, Craeghs T, Humbeeck JV, Kruth JP (2010) A study of the microstructural evolution during selective laser melting. Acta Mater 58:3303–331210.1016/j.actamat.2010.02.004 ↗
36. Dilip JJS, Janaki Ram GD, Starr TL, Stucker B (2017) Selective laser melting of HY100 steel: process parameters, microstructure and mechanical properties. Addit Manuf 13:49–6010.1016/j.addma.2016.11.003 ↗
37. Vrancken B, Thijs L, Kruth JP, Van Humbeeck J (2012) Heat treatment of Ti6Al4 V produced by selective laser melting: microstructure and mechanical properties. J Alloys Compd 541:177–18510.1016/j.jallcom.2012.07.022 ↗
38. Vrancken B, Thijs L, Kruth JP, Van Humbeeck J (2014) Microstructure and mechanical properties of a novel b titanium metallic composite by selective laser melting. Acta Mater 68:150–15810.1016/j.actamat.2014.01.018 ↗
39. Wauthle R, Vrancken B, Beynaerts B, Jorissen K, Schrooten J, Kruth JP, Humbeeck JV (2015) Addit Manuf 5:77–8410.1016/j.addma.2014.12.008 ↗
40. Cain V, Thijs L, Humbeeck JV, Hooreweder BV, Knutsen R (2015) Crack propagation and fracture toughness of Ti6Al4 V alloy produced by selective laser melting. Addit Manuf 5:68–7610.1016/j.addma.2014.12.006 ↗
41. Yadroitsev I, Krakhmalev P, Yadroitsava I (2014) Selective laser melting of Ti6Al4 V alloy for biomedical applications: temperature monitoring and microstructural evolution. J Alloys Compd 583:404–40910.1016/j.jallcom.2013.08.183 ↗
42. Cloots M, Kunze K, Uggowitzer PJ, Wegener K (2016) Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting. Mater Sci Eng A 658:68–7610.1016/j.msea.2016.01.058 ↗
43. Hedberg YS, Qian B, Shen Z, Virtanen S, Wallinder IO (2014) In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. Dent Mater 30:525–53410.1016/j.dental.2014.02.008 ↗
44. Girardin E, Barucca G, Mengucci P, Fiori F, Bassoli E, Gatto A, Iuliano L, Rutkowski B (2016) Biomedical Co-Cr-Mo components produced by direct metal laser melting. Mater Proc 3:889–897
45. Franco A, Romoli L, Musacchio A (2014) Modelling for predicting seam geometry in laser bean welding of stainless steel. Int J Therm Sci 79:194–20510.1016/j.ijthermalsci.2014.01.003 ↗
46. Kurz W, Trivedi R (2014) Rapid solidification processing and microstructure formation. Mater Sci Eng A 179(180):46–51
47. Harrison NJ, Todd I, Mumtaz K (2015) Reduction of micro-cracking in nickel superalloys processed by selective laser melting: a fundamental alloy design approach. Acta Mater 94:59–6810.1016/j.actamat.2015.04.035 ↗
48. Li Y, Gu D (2015) Thermal behavior during selective laser melting of commercially pure titanium powder: numerical simulation and experimental study. Addit Manuf 1–4:99–109
49. Xia M, Gu D, Yu G, Dai D, Chen H (2016) Influence of hatch spacing on the heat mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy. Int J Mach Tools Manuf 109:147–15710.1016/j.ijmachtools.2016.07.010 ↗
50. Wang W, Yin F, Zhang M, Zhao M, Li Z (2014) Experimental investigation and thermodynamic calculation of the Co-Cr-Mo system. J Phase Equilib Diffus 35:544–55410.1007/s11669-014-0317-7 ↗