Effect of different types of nano-size oxide particulates on microstructural and mechanical properties of elemental Mg
Source abstract
Abstract
In the present study, magnesium based composites were fabricated with three different types of 1.1 volume percent nanosize oxide particulate reinforcements (i.e., Al2O3, Y2O3 and ZrO2) using blend-press-sinter methodology avoiding ball milling. Microstructural characterization of the materials revealed reasonably uniform distribution of nano-reinforcement, significant grain refinement and the presence of minimal porosity. Mechanical properties characterization revealed that the incorporation of nano-sized oxide particulates as reinforcement led to a simultaneous increase in hardness, 0.2% yield strength, UTS and ductility of pure magnesium. The results further revealed that the 0.2% yield strength, UTS and ductility combination of the magnesium containing nano-size Al2O3 remained higher when compared to high strength magnesium alloy AZ91 reinforced with much higher amount of micron size SiC particulates. An attempt is made in the present study to correlate the effect of different types of nano-sized oxide particulates on the microstructural and mechanical properties of magnesium.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A. BECK, in “Magnesium und seine Legierungen” (Springer-Verlag, Berlin, 1939).
2. R. FINK, in “Die-Casting Magnesium, Magnesium-Alloys and Technologies,” edited by K. U. Kainer (Wiley-VCH Verlag GmbH & Co., Weinheim, Germany, 2003) p. 23.10.1002/3527602046.ch2 ↗
3. C. AKEY and J. DAVIS, in “Magnesium: The Performance Material” (International Magnesium Association, Dearborn, MI, 1989) p. 1.
4. S. SCHUMANN and F. FRIEDRICH, in “Material Alloys and their Applications,” edited by B. Mordike and K. Kainer, (Werkstoff-Informationsgesellschaft mbH, Wolfsburg, Germany, 1998) p. 3.
5. G. COLE, in “Magnesium into the Next Millennium” (International Magnesium Association, Rome, Italy, 1999) p. 21.
6. H. FRIEDRICH and S. SCHUMANN, in Magnesium 2000: Proceedings of the Israeli International Conference on Magnesium Science and Technology, edited by E. Aghion and D. Eliezer (Kavim Ltd., Beer-Sheva, Israel, 2000) p. 9.
7. R. E. REED-HILL, in “Physical Metallurgy Principles,” 2nd edn. (NY, USA, D. Van Nostrand Company, 1964) p. 192, 267 and 725.
8. D. J. LLOYD, Int. Mater. Rev. 39(1) (1994) 1.10.1179/imr.1994.39.1.1 ↗
9. D. M. LEE, B. K. SUH, B. G. KIM, J. S. LEE and C. H. LEE, Mater. Sci. Tech. 13 (1997) 590.10.1179/mst.1997.13.7.590 ↗
10. H. FERKEL and MORDIKE B. L., Mater. Sci. Engng. A 298 (2001) 193.10.1016/S0921-5093(00)01283-1 ↗
11. S. F. HASSAN and M. GUPTA, Mater. Sci. Tech. 19M (2003) 253.10.1179/026708303225009346 ↗
12. S. F. HASSAN and M. GUPTA, J. Mater. Sci. 37 (2002) 2467.10.1023/A:1015475103720 ↗
13. J. LLORCA, A. NEEDLEMAN and S. SURESH, Acta. Metal. Materialia, 39(10) (1991) 2317.10.1016/0956-7151(91)90014-R ↗
14. A. R. VAIDYA and J. J. LEWANDOOWSKI, Mater. Sci. Engng. A 220 (1996) 85.10.1016/S0921-5093(96)10464-0 ↗
15. R. UNVERRICHT, V. PEITZ, W. RIEHEMANN and H. FERKEL, in Proceeding of Conference on Magnesium Alloys and Their Applications, Germany, 1998, p. 327.
16. ALOK SINGH, M. NAKAMURA, M. WATANABE, A. KATO and A. P. TSAI, Scripta Materialia 49 (2003) 417.
17. A. G. GUY, in “Elements of Physical Metallurgy,” 2nd edn. (USA, Addison-Wesley, 1967) p. 233.
18. GEORGE S. ANSELL, in “Physical Metallurgy,” edited by R. W. Cahn (North-Holland Publishing Company, Netherlands, 1970) p. 1083.
19. P. PEREZ, G. GARCES and P. ADEVA, Comp. Sci. Tech. 64 (2004) 145.10.1016/S0266-3538(03)00215-X ↗
20. S. F. HASSAN and M. GUPTA, J Alloys Compd. 345 (2002) 246.10.1016/S0925-8388(02)00413-9 ↗
21. WEI YANG and W. B. LEE, in “Mesoplasticity and its Applications” (Materials Research and Engineering, Springer-Verlag, Berlin, Germany, 1993) p. 361.10.1007/978-3-642-50040-4_11 ↗
22. N. EUSTATHOPOULOS, M. G. NICHOLAS and B. DREVET, in “Wettability at High Temperatures” (Pregamon Materials Series, Elsevier, UK, 1999) vol. 3, p. 198.
23. J. D. GILCHRIST, in “Extraction Metallurgy,” 3rd edn. (Pergamon Press, Great Britain, 1989) p. 148.
24. M. J. TAN and X. ZHANG, Mater. Sci. Engng A 244 (1998) 80.10.1016/S0921-5093(97)00829-0 ↗
25. P. G. SHEWMON, in “Transformation in Metals” (McGraw-Hill Book Company, NY, USA, 1969) p. 69.
26. B. Q. HAN and D. C. DUNAND, Mater. Sci. Engng A 277 (2000) 297.10.1016/S0921-5093(99)00074-X ↗
27. R. M. GERMAN, in “Powder Metallurgy Science,” 2nd edn (Metal Powder Industries Federation, Princeton, N.J, USA, 1994).
28. L. E. MURR, in “Interfacial Phenomena in Metals and Alloys” (Addison-Wesley, MA, USA, 1975) p. 28, 202 and 340.
29. J. NASER, W. RIEHEMANN and H. FERKEL, Mater. Sci. Engng. A 234 236 (1997) 467.10.1016/S0921-5093(97)00269-4 ↗
30. ASM Metal Reference Book, 3rd edn., edited by Michael Bauccio, (ASM International, Materials Park, USA, 1993) p. 145.
31. R. MORRELL, in “Handbook of Properties of Technical and Engineering Ceramics, Part 1: An Introduction for the Engineer and Designer” (Her Majesty’s Stationary Office, England, 1985) p. 82 and 95.
32. Y. S. TOULOUKIAN, in “Thermophysical Properties of High Temperature Solid Materials” (Purdue University, 1967) p. 552.
33. M. F. ASHBY and D. R. H. JONES, in “Engineering Materials I” (Butterworth-Heinemann, Oxford, Boston, USA, 1996) p. 34 and 86.
34. M. GUPTA and T. S. SRIVATSAN, J. Mater. Engng. Perfor. 8(4) (1999) 473.10.1361/105994999770346792 ↗
35. F. WUA, J. ZHUA, Y. CHEN and G. ZHANG, Mater. Sci. Engng. A 277 (2000) 143.10.1016/S0921-5093(99)00548-1 ↗
36. H. JYNGE and K. MOTZFELDT, Electrochimica Acta25 (1980) 139.10.1016/0013-4686(80)80034-X ↗
37. NICHOLAS J. GRANT, in “Dispersed Phase Strengthening” in “Strengthening of Metals” edited by Donald Peckner (Reinhold Publishing Corporation, USA, 1964) p. 163.
38. G. E. DIETER, in “Mechanical Metallurgy” (McGraw-Hill Book Corporation, Singapore, 2001) p. 329.
39. WILLIAM D. CALLISTER, JR., in “Materials Science and Engineering: An Introduction” (John Wiley & Sons, Inc., USA, 1985) p. 101.
40. C. H. CA’CERES and W. J. POOLE, Mater. Sci. Engng A 332 (2002) 311.10.1016/S0921-5093(01)01744-0 ↗
41. M. GUPTA and T.S. SRIVATSAN, Mater. Lett. 51 (2001) 255.10.1016/S0167-577X(01)00300-7 ↗
42. J. KOIKE, T. KOBAYASHI, T. MUKAI, H. WATANABE, M. SUZUKI, K. MARUYAMA and K. HIGASHI, Acts Materialia 51 (2003) 2055.10.1016/S1359-6454(03)00005-3 ↗