Reduction of nickel oxide particles by hydrogen studied in an environmental TEM
Source abstract
Abstract
In situ reduction of nickel oxide (NiO) particles is performed under 1.3 mbar of hydrogen gas (H2) in an environmental transmission electron microscope (ETEM). Images, diffraction patterns and electron energy-loss spectra (EELS) are acquired to monitor the structural and chemical evolution of the system during reduction, whilst increasing the temperature. Ni nucleation on NiO is either observed to be epitaxial or to involve the formation of randomly oriented grains. The growth of Ni crystallites and the movement of interfaces result in the formation of pores within the NiO grains to accommodate the volume shrinkage associated with the reduction. Densification is then observed when the sample is nearly fully reduced. The reaction kinetics is obtained using EELS by monitoring changes in the shapes of the Ni L2,3 white lines. The activation energy for NiO reduction is calculated from the EELS data using both a physical model-fitting technique and a model-independent method. The results of the model-fitting procedure suggest that the reaction is described by Avrami models (whereby the growth and impingement of Ni domains control the reaction), in agreement with the ETEM observations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Kung HH (1989) Transition metal oxides: surface chemistry and catalysis. Elsevier, New York
2. Thomas JM, Thomas WJ (1996) Principles and practice of heterogeneous catalysis. VCH, New York
3. Delmon B (1997) Handbook of heterogeneous catalysis. Wiley VCH, New York
4. Furstenau RP, McDougall G, Langell MA (1985) Surf Sci 150(1):5510.1016/0039-6028(85)90211-0 ↗
5. Lescop B, Jay JP, Fanjoux G (2004) Surf Sci 548(1–3):8310.1016/j.susc.2003.09.051 ↗
6. Hidayat T, Rhamdhani MA, Jak E, Hayes PC (2008) Miner Eng 21(2):15710.1016/j.mineng.2007.09.004 ↗
7. Hidayat T, Rhamdhani MA, Jak E, Hayes PC (2009) Metall Mater Trans B 40(4):46210.1007/s11663-009-9247-x ↗
8. Hidayat T, Rhamdhani MA, Jak E, Hayes PC (2009) Metall Mater Trans B 40(4):47410.1007/s11663-009-9239-x ↗
9. Hidayat T, Rhamdhani MA, Jak E, Hayes PC (2009) Metall Mater Trans B 40(1):110.1007/s11663-008-9212-0 ↗
10. Minh NQ (1993) J Am Ceram Soc 76(3):56310.1111/j.1151-2916.1993.tb03645.x ↗
11. Singhal SC, Kendall K (2003) High temperature solid oxide fuel cell - fundamentals, design and applications. Elseviser, Oxford
12. Benton AF, Emmett PH (1924) J Am Chem Soc 46(12):272810.1021/ja01677a018 ↗
13. Richardson JT, Scates R, Twigg MV (2003) Appl Catal A 246(1):13710.1016/S0926-860X(02)00669-5 ↗
14. Rodriguez JA, Hanson JC, Frenkel AI, Kim JY, Perez M (2002) J Am Chem Soc 124(2):34610.1021/ja0121080 ↗
15. Hossain MM, De Lasa HI (2007) AIChE J 53(7):181710.1002/aic.11188 ↗
16. Jankovic B, Adnadevic B, Mentus S (2008) Chem Eng Sci 63(3):56710.1016/j.ces.2007.09.043 ↗
17. Erri P, Varma A (2009) Ind Eng Chem Res 48(1):410.1021/ie071588m ↗
18. Syed-Hassan SSA, Li CZ (2011) Int J Chem Kinet 43(12):66710.1002/kin.20610 ↗
19. Khawam A, Flanagan DR (2006) J Phys Chem B 110(35):1731510.1021/jp062746a ↗
20. Avrami M (1939) J Chem Phys 7(12):110310.1063/1.1750380 ↗
21. Avrami M (1940) J Chem Phys 8(2):21210.1063/1.1750631 ↗
22. Avrami M (1941) J Chem Phys 9(2):17710.1063/1.1750872 ↗
23. Jankovic B, Adnadevic B, Mentus S (2007) Thermochim Acta 456(1):4810.1016/j.tca.2007.01.033 ↗
24. Yagi S, Kunii D (1955) Symp (Int) Combust 5(1):23110.1016/S0082-0784(55)80033-1 ↗
25. Utigard TA, Wu M, Plascencia G, Marin T (2005) Chem Eng Sci 60(7):206110.1016/j.ces.2004.11.024 ↗
26. Szekely J, Evans JW (1971) Metall Trans 2(6):169910.1007/BF02913896 ↗
27. L’Vov BV (2010) Russ J Appl Chem 83(5):77810.1134/S1070427210050046 ↗
28. Sharma R (2009) Microsc Res Tech 72(3):14410.1002/jemt.20667 ↗
29. Hansen PL, Wagner JB, Helveg S, Rostrup-Nielsen JR, Clausen BS, Topsøe H (2002) Science 295(5562):205310.1126/science.1069325 ↗
30. Chenna S, Banerjee R, Crozier PA (2011) Chem Cat Chem 3(6):1051
31. Yoshida H, Kuwauchi Y, Jinschek JR, Sun K, Tanaka S, Kohyama M, Shimada S, Haruta M, Takeda S (2012) Science 335(6066):31710.1126/science.1213194 ↗
32. Hofmann S, Sharma R, Wirth CT, Cervantes-Sodi F, Ducati C, Kasama T, Dunin-Borkowski RE, Drucker J, Bennett P, Robertson J (2008) Nat Mater 7(5):37210.1038/nmat2140 ↗
33. Sharma R (2005) J Mater Res 20(7):169510.1557/JMR.2005.0241 ↗
34. Jeangros Q, Faes A, Wagner JB, Hansen TW, Aschauer U, Van herle J, Hessler-Wyser A, Dunin-Borkowski RE (2010) Acta Mater 58:457810.1016/j.actamat.2010.04.019 ↗
35. Langford JI, Wilson AJC (1978) J Appl Crystallogr 11(2):10210.1107/S0021889878012844 ↗
36. Hansen TW, Wagner JB, Dunin-Borkowski RE (2010) Mater Sci Technol 26(11):133810.1179/026708310X12756557336355 ↗
37. Sharma R (2012) Micron 43(11):114710.1016/j.micron.2012.01.007 ↗
38. Egerton RF (2009) Rep Prog Phys 72(1):01650210.1088/0034-4885/72/1/016502 ↗
39. Leapman RD, Grunes LA, Fejes PL (1982) Phys Rev B 26(2):61410.1103/PhysRevB.26.614 ↗
40. Riedl T, Gemming T, Wetzig K (2006) Ultramicroscopy 106(4–5):28410.1016/j.ultramic.2005.09.002 ↗
41. Mitterbauer C, Kothleitner G, Grogger W, Zandbergen H, Freitag B, Tiemeijer P, Hofer F (2003) Ultramicroscopy 96(3–4):46910.1016/S0304-3991(03)00109-8 ↗
42. Bonnet N, Brun N, Colliex C (1999) Ultramicroscopy 77(3–4):9710.1016/S0304-3991(99)00042-X ↗
43. Keenan MR, Kotula PG (2004) Surf Interface Anal 36(3):20310.1002/sia.1657 ↗
44. Gatan (2010) Digital micrograph™ 1.84.1282 edn. GATAN
45. Pearson DH, Ahn CC, Fultz B (1993) Phys Rev B 47(14):847110.1103/PhysRevB.47.8471 ↗
46. van Aken PA, Liebscher B (2002) Phys Chem Miner 29(3):18810.1007/s00269-001-0222-6 ↗
47. van Aken PA, Liebscher B, Styrsa VJ (1998) Phys Chem Miner 25(5):32310.1007/s002690050122 ↗
48. Rez P, Moore ES, Sharma R (2008) Microsc Microanal 14(Suppl. 2):138210.1017/S1431927608082512 ↗
49. Sharma R, Crozier PA, Kang ZC, Eyring L (2004) Phil Mag 84(25–26):273110.1080/14786430410001671467 ↗
50. Kissinger HE (1957) Anal Chem 29(11):170210.1021/ac60131a045 ↗
51. Senum GI, Yang RT (1977) J Therm Anal 11(3):44510.1007/BF01903696 ↗
52. Tarfaoui A (1996) Modelling the kinetics of reduction by temperature programming. Delft University of Technology, Delft
53. Nelder JA, Mead R (1965) The Comput J 7(4):30810.1093/comjnl/7.4.308 ↗
54. Faes A, Nakajo A, Hessler-Wyser A, Dubois D, Brisse A, Modena S, Van herle J (2009) J Power Sources 193:5510.1016/j.jpowsour.2008.12.118 ↗
55. Stadelmann PA (1987) Ultramicroscopy 21(2):13110.1016/0304-3991(87)90080-5 ↗
56. Adnadevic B, Jankovic B (2008) Phys B 403(21–22):413210.1016/j.physb.2008.08.020 ↗
57. Buckett MI, Marks LD (1990) Surf Sci 232(3):35310.1016/0039-6028(90)90129-V ↗
58. Little JA, Evans JW, Westmacott KH (1980) Metall Trans B 11(3):51910.1007/BF02676897 ↗
59. Ostyn KM, Carter CB (1982) Surf Sci 121(3):36010.1016/0039-6028(82)90248-5 ↗
60. Belton GR, Jordan AS (1967) The J Phys Chem 71(12):411410.1021/j100871a060 ↗
61. Du K, Ernst F, Garrels M, Payer J (2008) Int J Mater Res 99(5):54810.3139/146.101663 ↗
62. Gubner A, Landes H, Metzger J, Seeg H, Stübner R (1997) Investigations into the degradation of the cermet anode of a solid oxide fuel cells. In: Stimming U, Singhal SC, Tagawa H, Lehnert W (eds) Solid Oxide Fuel Cells V, The electrochemical society, pp 84410.1149/199740.0844PV ↗
63. Sarantaridis D, Atkinson A (2007) Fuel Cells 7(3):24610.1002/fuce.200600028 ↗
64. Richardson JT, Lei M, Turk B, Forster K, Twigg MV (1994) Appl Catal A 110(2):21710.1016/0926-860X(94)80198-3 ↗
65. Egerton RF, Li P, Malac M (2004) Micron 35(6):39910.1016/j.micron.2004.02.003 ↗
66. Zhang Z, Su D (2009) Ultramicroscopy 109(6):76610.1016/j.ultramic.2009.01.015 ↗