Bond performance of reinforcing bars in inorganic polymer concrete (IPC)
Source abstract
Abstract
The basic mechanical and chemical properties of fly-ash-based inorganic polymer concretes (IPC) have been studied widely, but, key engineering and structural properties of the material for instance modulus of elasticity, compressive, tensile, flexural strengths and bonding strength of the material to reinforcement have received little attention. Structural applications of reinforced IPC depend on the bond performance of the material to the reinforcement. Due to their difference with ordinary Portland cement (OPC) based concrete in terms of chemical reaction and matrix formation it is not known whether IPC exhibit different bonding performance with the reinforcement. Simply relying on compressive strength of the material and extrapolating models and equations meant for OPC based concrete may lead to unsafe design of structural members. To that end, 27 beam-end specimens, 58 cubic direct pullout type specimens and number of laboratory test specimens were tested to evaluate bonding performance of IPC with reinforcement. The results of beam-end specimens and direct pullout type specimens correlate favourably, although the results of direct pullout tests are in general more conservative than those of beam-end specimens. Overall, it can be concluded that bond performance of IPC mixes are comparable to OPC based concrete and therefore IPC and steel can be used as a composite material to resist tension in addition to compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Phair JW, van Deventer JSJ, Smith JD (2004) Appl Chem 19(3):423
2. Glukovskii VD, Rostovskaja GS, Rumina GV (1980) Commun 7th Int Cong Chem Cement 3:164
3. Yip CK (2004) The Role of Calcium in Geopolymerisation. PhD Thesis, The University of Melbourne, Department of Chemical Engineering, Melbourne, Australia
4. van Jaarsveld, JGS (2000) The Physical and Chemical Characterisation of Fly Ash Based Geopolymers. PhD Thesis, The University of Melbourne, Department of Chemical Engineering, Melbourne, Australia
5. Davidovits J, Davidovics M (1988) Ceramic Eng Sci Process 9(7–8):83510.1002/9780470310496.ch34 ↗
6. van Jaarsveld JGS, van Deventer JSJ (1999) Cement Concrete Res 29:118910.1016/S0008-8846(99)00032-0 ↗
7. Davidovits J (1994) Properties of Geopolymer Cements. First International Conference on Alkaline Cements and Concretes, Scientific Research Institute on Binders and Materials, vol 1. Kiev State Technical University, Kiev, Ukraine, 131–149
8. Carroll D, Dougherty A, Nisbet M, O’Hare A (1998) U.S. Portland cement industry, concrete and global climate, Proceedings of the 1998 91st Annual Meeting and Exhibition, 98-MA7.04, 9pp, Pittsburgh, PA, USA, San Diego, CA, USA, 9
9. Xu A (1997) In: Chandra S (ed) Waste materials used in concrete manufacturing. Noyes Publications, Westwood, NJ, USA, pp 141–173
10. Priori L, Salvaderi L (2003) Limiting the Greenhouses Gases: A possible Italian strategy in the European Framework, 2003 IEEE Power Engineering Society General Meeting, Jul 13–17 2003, Institute of Electrical and Electronics Engineers Inc., Toronto, Ont., Canada, 2000–2003
11. Malhotra VM (1999) Indian Concrete J 73(10):609
12. Madaan DS, Kukreja CB, Sastry VV (1979) Indian Concrete J 53(11):294
13. Wong YL, Lam L, Poon CS, Zhou FP (1999) Cement Concrete Res 29(12):190510.1016/S0008-8846(99)00189-1 ↗
14. Lee CY, Lee HK, Lee KM (2003) Cement and Concrete Res 33(3):42510.1016/S0008-8846(02)00973-0 ↗
15. Shi C, Qian J (2003) Energ Source 25(6):61710.1080/00908310303414 ↗
16. Shi C, Day LR (1996) Cement Concrete Res 26(9):53710.1016/0008-8846(96)00123-8 ↗
17. Xu A, Sarkar SL (1991) Cement and Concrete Res 21(6):113710.1016/0008-8846(91)90074-R ↗
18. Davidovits J (1987) Concrete Int 9:23
19. van Jaarsveld JGS, van Deventer JSJ, Lukey GC (2004) Chem Eng Commun 191(4):53110.1080/00986440490277974 ↗
20. Feng D, Tan H, van Deventer JSJ (2004) J Mater Sci 39(2):57110.1023/B:JMSC.0000011513.87316.5c ↗
21. Xu H, van Deventer JSJ (2003) Ind Eng Chem Res 42(8):698
22. Lee WKW, van Deventer JSJ (2004) Cement Concrete Res 34(2):19510.1016/S0008-8846(03)00250-3 ↗
23. Malone PG, Kirkpatrick T, Randall CA (1986) “Potential Applications of Alkali-activated Alumino Silicate Binders in Military Operations”, WES/MP/GL-85-15, U.S. Army Corps of Engineers, Vicksburg, Mississipi
24. Warner RF, Rangan BV, Hall AS, Faulkes KA (1998) Concrete structures. Ed. Longman, Melbourne, Australia
25. Mendis PA, French CW (2000) Adv Struct Eng J 3(3):24510.1260/1369433001502175 ↗
26. ASTM C 234-91 (1991) Standard Test Method for Comparing Concrete on the Basis of the Bond Developed with Reinforced Steel, ASTM Annual Book of Standards, West Conshohocken, United States
27. Abrishami HH, Mitchell D (1996) J Struct Eng 122(3):25510.1061/(ASCE)0733-9445(1996)122:3(255) ↗
28. Cairns J, Abdullah R (1995) Struct Eng 73(11):179
29. Choi OC, Hadje-Ghaffari H, Darwin D, McCabe SL (1990) ACI Mater J 88(2):207
30. ASTM A 944-99 (2000) Standard test method for comparing bond strength of steel reinforcing bars to concrete using beam-end specimens. Annual Book of ASTM Standards, West Conshohocken, United States
31. Yip CK, Lukey GC, Van Deventer JSJ (2005) The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation. Cement Concrete Res 35(9):168810.1016/j.cemconres.2004.10.042 ↗
32. Phair JW (2001) Compositional effects and microstructure of fly ash based geopolymers. PhD Thesis, Department of Chemical Engineering, The University of Melbourne, Australia
33. Lee WKW, van Deventer JSJ (2001) The Addition of Chemical Additives to Control the Setting Speed of Geopolymeric Binders, Proceedings of the 6th World Congress of Chemical Engineering, CD-ROM, Melbourne, Australia
34. Sofi M, van Deventer JSJ, Mendis PA, Lukey GC (2006) Engineering properties of inorganic polymer concretes (IPCs). Cement and Concrete Res (In press)10.1016/j.cemconres.2006.10.008 ↗
35. Sofi, M (2003) Bond Performance of Reinforcing Bars in Geopolymer Concretes. Masters Thesis, Department of Civil and Environmental Engineering, Melbourne University, Melbourne, Australia
36. AS 3600 (2001) Concrete Structures Code, Standard Association of Australia, Sydney
37. Beeby AW (1995) Designers’ Handbook to Eurocode 2, London: T. Telford; New York: American Society of Civil Engineers
38. ACI 318 – 02 (2002) “Building Code Requirements for Structural Concrete”, Reported by ACI Committee 318
39. Neville AM (1996) Properties of concrete, 4th edn. John Wiley and Sons, Inc
40. Orangun CO, Jirsa JO, Breen JE (1977) J ACI 74(11):14
41. Darwin D, Ebenezer KG (1993) ACI Mater J 90(6):46
42. Tepfers R (1973) A theory of bond applied to overlapped tensile reinforcement splices for deformed bars, Chalmers University of Technology, Goteborg