Review of stress corrosion cracking of pipeline steels in “low” and “high” pH solutions
Source abstract
Abstract
This paper reviews the current understanding of the mechanisms of stress corrosion cracking of pipeline steels. The similarities, the differences and the influencing factors are considered for the high pH stress corrosion cracking caused by a concentrated bicarbonate-carbonate solution, and for the low pH stress corrosion cracking due to a diluter solution. For high pH stress corrosion cracking, it is well accepted that the mechanism involves anodic dissolution for crack initiation and propagation. In contrast, it has been suggested that the low pH stress corrosion cracking is associated with the dissolution of the crack tip and sides, accompanied by the ingress of hydrogen into the pipeline steel. But the precise influence of hydrogen on the mechanism needs to be further studied. (C) 2003 Kluwer Academic Publishers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Structural Integrity and Reliability Analysis · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. National Energy Board, Report of Public Inquiry concerning Stress Corrosion Cracking on Canadian Oil and Gas Pipelines, MH-2-95, November 1996.
2. H. E. Townsend, Jr., MP 10 (1972) 33.
3. P. J. Kentish, Brit. Corrosion. J. 20 (1985) 139.10.1179/000705985798272786 ↗
4. B. Delanty and J. O'Beirne, Oil Gas J. June 15 (1992) 39.
5. R. L. Wenk, 5th Symp. On Line Pipe Research, Catalog No. L30174 (American Gas Association, Arlington, VA, 1974) p. T–1.
6. M. Yunoyich, Z. Xia and Z. Szklarska-Smialowska, Corrosion 54 (1998) 155.10.5006/1.3284839 ↗
7. M. J. Wilmott, T. R. Jack, G. van Boven and R. L. Sutherby, in Corrosion'96, paper no. 242 (NACE, Houston, 1996).
8. CEPA (1996): Submission to the National Energy Board, Proceeding MH-2-95, Vol. 1, Issue 2, Table 2.1 and Response to OPLA Information Request #8 of Proceeding MH-2-95.
9. R. N. Parkins, W. K. Blanchard Jr. and B. S. Delanty, Corrosion 50 (1994) 394.10.5006/1.3294348 ↗
10. B. Gu, W. Z. Yu, J. L Luo and X. Mao, ibid. 55 (1999) 312.10.5006/1.3283993 ↗
11. F. King, T. Jack, W. X. Chen, S. H. Wang, M. Elboujdaini, W. Revie, R. Worthingham and P. Dusek, in Corrosion'01, paper no. 01214 (NACE, Houston, 2001).
12. R. N. Parkins, in Corrosion'00, paper no. 00363 (NACE, Houston, 2000).
13. R. N. PArkins and S. Zhou, Corrosion Science 39 (1997) 159.10.1016/S0010-938X(96)00116-3 ↗
14. R. N. Parkins, 5th Symp. On Line Pipe Research, American Gas Association, Catalog No. L30174, 1974, p. U–1.
15. Idem., Corrosion Science 20 (1980) 147.10.1016/0010-938X(80)90128-6 ↗
16. F. King, T. Jack, W. X. Chen, M. Wilmott, R. R. Fessle and K. Krist, in Corrosion'00, paper no. 00361 (NACE, Houston, 2000).
17. R. B. Rebak, Z. Xia, R. Safruddin and Z. Szklarska-Smialowska, Corrosion 52 (1996) 396.10.5006/1.3292126 ↗
18. E. A. Charles and R. N. Parkins, ibid. 51 (1995) 518.10.5006/1.3294372 ↗
19. J. M. Sutcliffe, R. R. Fessler, W. K. Boyd and Parkins, ibid. 28 (1972) 313.10.5006/0010-9312-28.8.313 ↗
20. R. N. Parkins, W. K. Blanchard, Jr. and B. S. Delanty, ibid. 50 (1994) 394.10.5006/1.3294348 ↗
21. H. Asahi, T. Kushida, M. Kimura, H. Fukai and S. Okano, ibid. 55 (1999) 644.10.5006/1.3284018 ↗
22. M. Kimura, T. Kushida, K. Nose, S. Okano, S. Endo and Y. Nishida, PVP-Vol. 380, Fitness-for-Service Evaluations in Petroleum and Fossil Power Plants (ASME, 1998).
23. T. Kushida, K. Nose, H. Asahi, M. Kimura, Y. Yamane, S. Endo and H. Kawano, in Corrosion'01, paper no. 01213 (NACE, Houston, 2001).
24. R. R. Fessler, A. J. Markworth and R. N. Parkins, Corrosion 39 (1983) 20.10.5006/1.3580809 ↗
25. J. A. Beavers, T. K. Christaman and R. N. Parkins, MP, April (1988) 22.
26. Z. F. Wang and A. Atrens, Metallurgical and Materials Transactions 27A (1996) 2686.10.1007/BF02652362 ↗
27. T. K. Christman, Corrosion 46 (1990) 450.10.5006/1.3585131 ↗
28. B. A. Harle, J. A. Beavers and C. E. Jaske, in Corrosion'95, paper no. 646 (NACE, Houston, 1995).
29. R. N. Parkins, Corrosion'95, paper no. 183 (NACE, Houston, 1995).
30. Idem., Corrosion 52 (1996) 363.10.5006/1.3292124 ↗
31. J. Q. Wang, A. Atrens, D. R. Cousens, C. Nockolds and S. Bulcock, J. Mater. Sci. 34 (1999) 1711.10.1023/A:1004530420338 ↗
32. J. Q. Wang, A. Atrens, D. R. Cousens and N. Kinaev, ibid. 34 (1999) 1721.10.1023/A:1004538604409 ↗
33. J. Q. Wang, A. Atrens, D. R. Cousens, C. Nockolds and S. Bulcock, Acta Metall 46 (1998) 5677.
34. D. R. Cousens, B. J. Wood, J. Q. Wang and A. Atrens, Surf. Interface Anal. 29 (2000) 23.10.1002/(SICI)1096-9918(200001)29:1<23::AID-SIA689>3.0.CO;2-Y ↗
35. J. Q. Wang, A. Atrens and D. R. G. Mitchell, in Corrosion'01, paper no. 01210 (NACE, Houston, 2001).
36. J. A. Beavers, T. K. Christman and R. N. Parkins, in Corrosion'87, paper no. 178 (NACE, Houston, 1987).
37. J. A. Beavers and B. A. Harle, in International Pipeline Conference (ASME, 1996) Vol. 1 p. 555.
38. R. N. Parkins, E. Belhimer and W. K. Balanchard, Jr., Corrosion 49 (1993) 951.10.5006/1.3316023 ↗
39. R. N. Parkins and P. M. Singh, ibid. 46 (1990) 485.10.5006/1.3585136 ↗
40. R. N. Parkins, ibid. 43 (1987) 130.10.5006/1.3583125 ↗
41. R. N. Parkins, P. W. Slattery and B. S. Poulson, ibid. 37 (1981) 650.10.5006/1.3577554 ↗
42. B. A. Harle, J. A. Beavers and C. E. Jaske, in Corrosion'94, paper no. 242 (NACE, Houston, 1994).
43. B. Gu, J. Luo and X. Mao, Corrosion 55 (1999) 96.10.5006/1.3283971 ↗
44. A. Plumtree, S. B. Lambert and R. Sutherby, in Corrosion-Deformation Interactions CDI'96, European Federation of Corrosion Publications, edited by T. Magnin (The Institute of Materials, Nice, France, 1996) p. 263.
45. L. J. Qiao, J. L. Luo and X. Mao, Corrosion 54 (1998) 115.10.5006/1.3284834 ↗
46. R. R. Fessler and K. Krist, in Corrosion'00, paper no. 00370 (NACE, Houston, 2000).
47. C. D. Brachem, Metall. Trans. 3 (1972) 437.