Recent advances in efficient emissive materials-based OLED applications: a review
Source abstract
Abstract
In the present time, organic light-emitting diode (OLED) is a very promising participant over light-emitting diodes (LEDs), liquid crystal display (LCD), and also another solid-state lighting device due to its low cost, ease of fabrication, brightness, speed, wide viewing angle, low power consumption, and high contrast ratio. The most prominent layer of OLED is the emissive layer because the device emission color, contrast ratio, and external efficiency depend of this layer’s materials. This review ruminates on the basics of OLEDs, different light emission mechanisms, OLEDs achievements, and different types of challenges revealed in the field of OLEDs. This review’s primary intention is to broadly discuss the synthesizing methods, physicochemical properties of conducting polymer polymethyl methacrylate (PMMA), and its polymeric nanocomposite-based emissive layer materials for OLEDs application. It also discusses the most extensively used OLED fabrication techniques. PMMA-based polymeric nanocomposites revealed good transparency properties, good thermal stability, and high electrical conductivity, making suitable materials as an emissive layer for OLED applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Green IT and Sustainability · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Patil SS, Bhat TS, Teli AM et al (2020) Hybrid Solid State Supercapacitors (HSSC’s) for High Energy & Power Density: An Overview. Eng Sci 12:38–51
2. Deokate RJ (2020) Chemically Deposited NiCo2O4 Thin Films for Electrochemical Study. ES Mater Manuf. https://doi.org/10.30919/esmm5f93810.30919/esmm5f938 ↗
3. Satpute SD, Jagtap JS, Bhujbal PK et al (2020) Mercurochrome sensitized ZnO / In 2 O 3 photoanode for dye-sensitized solar cell. ES Energy Environ 9:89–94
4. Barma SV, Rondiya SR, Jadhav YA et al (2020) Structural, Optoelectronic, and Photoelectrochemical Investigation of CdSe NC’s Prepared by Hot Injection Method. ES Mater Manuf. https://doi.org/10.30919/esmm5f104010.30919/esmm5f1040 ↗
5. Shi J, Huang X, Guo H et al (2020) Experimental Investigation and Numerical Validation on the Energy-Saving Performance of A passive Phase Change Material Floor for A Real Scale Building. ES Energy Environ. https://doi.org/10.30919/esee8c38010.30919/esee8c380 ↗
6. Socaciu LG (2012) Thermal energy storage with phase change material. Leonardo Electron J Pract Technol 11:75–98. https://doi.org/10.1201/978036756769910.1201/9780367567699 ↗
7. Huang J, Luo Y, Weng M et al (2021) Advances and Applications of Phase Change Materials (PCMs) and PCMs-based Technologies. ES Mater Manuf. https://doi.org/10.30919/esmm5f45810.30919/esmm5f458 ↗
8. Peighambardoust SJ, Rowshanzamir S, Amjadi M (2010) Review of the proton exchange membranes for fuel cell applications. Elsevier Ltd10.1016/j.ijhydene.2010.05.017 ↗
9. Supekar A, Kapadnis R, Bansode S et al (2020) Cadmium Telluride/Cadmium Sulfide Thin Films Solar Cells: A Review. ES Energy Environ. https://doi.org/10.30919/esee8c70610.30919/esee8c706 ↗
10. Rahane GK, Jathar SB, Rondiya SR et al (2020) Photoelectrochemical Investigation on the Cadmium Sulfide (CdS) Thin Films Prepared using Spin Coating Technique. ES Mater Manuf. https://doi.org/10.30919/esmm5f104110.30919/esmm5f1041 ↗
11. Hussain R, Mehboob MY, Khan MU et al (2021) Efficient designing of triphenylamine-based hole transport materials with outstanding photovoltaic characteristics for organic solar cells. J Mater Sci 56:5113–5131. https://doi.org/10.1007/s10853-020-05567-610.1007/s10853-020-05567-6 ↗
12. Hou W, Xiao Y, Han G, Lin JY (2019) The applications of polymers in solar cells: A review. Polymers (Basel) 11:1–46. https://doi.org/10.3390/polym1101014310.3390/polym11010143 ↗
13. Reza Reisi A, Hassan Moradi M, Jamasb S (2013) Classification and comparison of maximum power point tracking techniques for the photovoltaic system: A review. Renew Sustain Energy Rev 19:433–443. https://doi.org/10.1016/j.rser.2012.11.05210.1016/j.rser.2012.11.052 ↗
14. Ya’u Muhammad J, Bello Waziri A, Muhammad Shitu A et al (2019) Recent Progressive Status of Materials for Solar Photovoltaic Cell: A Comprehensive Review. Sci J Energy Eng. https://doi.org/10.11648/j.sjee.20190704.1410.11648/j.sjee.20190704.14 ↗
15. Singh R, Choudhary RB (2021) Ag/AgCl sensitized n-type ZnO and p-type PANI composite as an active layer for hybrid solar cell application. Optik (Stuttg) 225:165766. https://doi.org/10.1016/j.ijleo.2020.16576610.1016/j.ijleo.2020.165766 ↗
16. Aleshin AN, Shcherbakov IP, Trapeznikova IN (2014) Temperature and concentration dependences of the photoluminescence of MEH-PPV polymer composite films with ZnO nanoparticles. Phys Solid State 56:405–411. https://doi.org/10.1134/S106378341402002410.1134/S1063783414020024 ↗
17. Singh R, Choudhary RB, Kandulna R (2019) Optical band gap tuning and thermal properties of PMMA-ZnO sensitized polymers for efficient exciton generation in solar cell application. Mater Sci Semicond Process 103:104623. https://doi.org/10.1016/j.mssp.2019.10462310.1016/j.mssp.2019.104623 ↗
18. Hu H, Ding F, Ding H et al (2020) Sulfonated poly(fluorenyl ether ketone)/Sulfonated α-zirconium phosphate Nanocomposite membranes for proton exchange membrane fuel cells. Adv Compos Hybrid Mater 3:498–507. https://doi.org/10.1007/s42114-020-00182-010.1007/s42114-020-00182-0 ↗
19. Ding F, Hu H, Ding H et al (2020) Sulfonated poly(fluorene ether ketone) (SPFEK)/α-zirconium phosphate (ZrP) nanocomposite membranes for fuel cell applications. Adv Compos Hybrid Mater 3:546–550. https://doi.org/10.1007/s42114-020-00184-y10.1007/s42114-020-00184-y ↗
20. Zhang C, Xie Y, Deng H et al (2019) Nitrogen-doped coal with high electrocatalytic activity for the oxygen reduction reaction. Eng Sci 8:39–45
21. Li D, Sun J, Ma R, Wei J (2020) High-efficient and Low-cost H2 Production by Solar-driven Photo-thermo-reforming of Methanol with CuO Catalyst. ES Energy Environ. https://doi.org/10.30919/esee8c72210.30919/esee8c722 ↗
22. Yu M, Yu T, Chen S et al (2020) A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity. ES Mater Manuf. https://doi.org/10.30919/esmm5f71210.30919/esmm5f712 ↗
23. Ke Y, Guo H, Wang D et al (2014) ZrO2/g-C3N4 with enhanced photocatalytic degradation of methylene blue under visible light irradiation. J Mater Res 29:2473–2482. https://doi.org/10.1557/jmr.2014.27610.1557/jmr.2014.276 ↗
24. Chen Y, Bai X (2020) A review on quantum dots modified g-C3N4-based photocatalysts with improved photocatalytic activity. Catalysts. https://doi.org/10.3390/catal1001014210.3390/catal10010142 ↗
25. Tyan Y-S (2011) Organic light-emitting-diode lighting overview. J Photonics Energy 1:011009. https://doi.org/10.1117/1.352941210.1117/1.3529412 ↗
26. Thejo Kalyani N, Dhoble SJ (2012) Organic light-emitting diodes: Energy saving lighting technology - A review. Renew Sustain Energy Rev 16:2696–2723. https://doi.org/10.1016/j.rser.2012.02.02110.1016/j.rser.2012.02.021 ↗
27. Mitschke U, Bäuerle P (2000) The electroluminescence of organic materials. J Mater Chem 10:1471–1507. https://doi.org/10.1039/a908713c10.1039/a908713c ↗
28. Pode R (2020) Organic light-emitting diode devices: An energy-efficient solid-state lighting for applications. Renew Sustain Energy Rev 133:110043. https://doi.org/10.1016/j.rser.2020.11004310.1016/j.rser.2020.110043 ↗
29. Brütting W, Berleb S, Mückl AG (2001) Device physics of organic light-emitting diodes based on molecular materials. Org Electron 2:1–36. https://doi.org/10.1016/S1566-1199(01)00009-X10.1016/S1566-1199(01)00009-X ↗
30. Gather MC, Reineke S (2015) Recent advances in light out-coupling from white organic light-emitting diodes. J Photonics Energy 5:057607. https://doi.org/10.1117/1.jpe.5.05760710.1117/1.jpe.5.057607 ↗
31. Luo R, Li H, Du B et al (2020) A simple strategy for high stretchable, flexible and conductive polymer films based on PEDOT: PSS-PDMS blends. Org Electron 76:105451. https://doi.org/10.1016/j.orgel.2019.10545110.1016/j.orgel.2019.105451 ↗
32. Yeh P, Yeh N, Lee CH, Ding TJ (2017) Applications of LEDs in optical sensors and chemical sensing devices to detect biochemicals, heavy metals, and environmental nutrients. Renew Sustain Energy Rev 75:461–468. https://doi.org/10.1016/j.rser.2016.11.01110.1016/j.rser.2016.11.011 ↗
33. Wang Y, Liu P, Wang H et al (2019) Flexible organic light-emitting devices with copper nanowire composite transparent conductive electrode. J Mater Sci 54:2343–2350. https://doi.org/10.1007/s10853-018-2986-910.1007/s10853-018-2986-9 ↗
34. Hong K, Lee JL (2011) Review paper: Recent developments in light extraction technologies of organic light-emitting diodes. Electron Mater Lett 7:77–91. https://doi.org/10.1007/s13391-011-0601-110.1007/s13391-011-0601-1 ↗
35. Rana R, Mehra R (2019) Investigation of Organic LED Materials Using a Transparent Cathode for Improved Efficiency. J Electron Mater 48:4409–4417. https://doi.org/10.1007/s11664-019-07221-710.1007/s11664-019-07221-7 ↗
36. Singh M, Jou JH, Sahoo S et al (2018) High light-quality OLEDs with a wet-processed single emissive layer. Sci Rep 8:2–10. https://doi.org/10.1038/s41598-018-24125-410.1038/s41598-018-24125-4 ↗
37. Jolt Oostra A, Blom PWM, Michels JJ (2014) Prevention of short circuits in solution-processed OLED devices. Org Electron 15:1166–1172. https://doi.org/10.1016/j.orgel.2014.03.00810.1016/j.orgel.2014.03.008 ↗
38. Yuan Q, Wang T, Yu P et al (2021) A review on the electroluminescence properties of quantum-dot light-emitting diodes. Org Electron 90:106086. https://doi.org/10.1016/j.orgel.2021.10608610.1016/j.orgel.2021.106086 ↗
39. Islam A, Rabbani M, Bappy MH, et al. (2013) A review on the fabrication process of organic light-emitting diodes. 2013 Int Conf Informatics, Electron Vision, ICIEV 2013. https://doi.org/10.1109/ICIEV.2013.657265610.1109/ICIEV.2013.6572656 ↗
40. Yersin H (2012) Triplet Emitters for OLED Applications. Mech Exciton Trapping Control Emission Properties. https://doi.org/10.1007/b9685810.1007/b96858 ↗
41. Chen S, Zhao X, Wu Q et al (2013) Efficient, color-stable flexible white top-emitting organic light-emitting diodes. Org Electron 14:3037–3045. https://doi.org/10.1016/j.orgel.2013.09.00410.1016/j.orgel.2013.09.004 ↗
42. Shinar J (2013) Organic light-emitting device. Springer, USA
43. Pode R, Diouf B (2011) solar lighting. Springer, South Korea10.1007/978-1-4471-2134-3 ↗
44. Koden M (2017) OLED Fabrication Process. OLED Displays Light. https://doi.org/10.1002/9781119040477.ch610.1002/9781119040477.ch6 ↗
45. Tang CW, Vanslyke SA (1987) Organic electroluminescent diodes. Appl Phys Lett 51:913–915. https://doi.org/10.1063/1.9879910.1063/1.98799 ↗
46. Lakshmanan R, Daniel SCGK (2018) Engineered nanomaterials for organic light-emitting diodes (OLEDs). Elsevier Inc.10.1016/B978-0-12-813351-4.00020-1 ↗
47. Bochkarev MN, Katkova MA, Ilichev VA, Konev AN (2008) New cathode materials for organic light-emitting diodes: Tm: Yb and Eu:Yb. Nanotechnologies Russ 3:470–473. https://doi.org/10.1134/s199507800807009410.1134/s1995078008070094 ↗
48. Hasegawa T, Takeya J (2009) Organic field-effect transistors using single crystals. Sci Technol Adv Mater. https://doi.org/10.1088/1468-6996/10/2/02431410.1088/1468-6996/10/2/024314 ↗
49. Xie ZY, Hung LS, Lee ST (2001) High-efficiency red electroluminescence from a narrow recombination zone confined by an organic double heterostructure. Appl Phys Lett 79:1048–1050. https://doi.org/10.1063/1.139047910.1063/1.1390479 ↗
50. Zheng XY, Zhu WQ, Wu YZ et al (2003) A white OLED based on DPVBi blue light-emitting host and DCJTB red dopant. Displays 24:121–124. https://doi.org/10.1016/j.displa.2003.09.00410.1016/j.displa.2003.09.004 ↗
51. He Y, Cheng N, Xu X et al (2019) A high efficiency pure organic room temperature phosphorescence polymer PPV derivative for OLED. Org Electron 64:247–251. https://doi.org/10.1016/j.orgel.2018.10.01210.1016/j.orgel.2018.10.012 ↗
52. Park TJ, Jeon WS, Park JJ et al (2008) Efficient, simple structure red phosphorescent organic light-emitting devices with narrow bandgap fluorescent host. Appl Phys Lett 92:2006–2009. https://doi.org/10.1063/1.289664110.1063/1.2896641 ↗
53. Liu Z, Helander MG, Wang Z, Lu Z (2010) Band alignment at anode/organic interfaces for highly efficient simplified blue-emitting organic light-emitting diodes. J Phys Chem C 114:16746–16749. https://doi.org/10.1021/jp105782w10.1021/jp105782w ↗
54. Zhang ZQ, Liu YP, Dai YF et al (2014) High-efficiency phosphorescent white organic light-emitting diodes with stable emission spectrum based on RGB separately monochromatic emission layers. Chinese Phys Lett. https://doi.org/10.1088/0256-307X/31/4/04680110.1088/0256-307X/31/4/046801 ↗
55. Uoyama H, Goushi K, Shizu K et al (2012) Highly efficient organic light-emitting diodes from delayed fluorescence. Nature 492:234–238. https://doi.org/10.1038/nature1168710.1038/nature11687 ↗
56. Chen XK, Kim D, Brédas JL (2018) Thermally Activated Delayed Fluorescence (TADF) Path toward Efficient Electroluminescence in Purely Organic Materials: Molecular Level Insight. Acc Chem Res 51:2215–2224. https://doi.org/10.1021/acs.accounts.8b0017410.1021/acs.accounts.8b00174 ↗
57. Yuan Y, Hu Y, Zhang YX et al (2017) Over 10% EQE Near-Infrared Electroluminescence Based on a Thermally Activated Delayed Fluorescence Emitter. Adv Funct Mater 27:1–5. https://doi.org/10.1002/adfm.20170098610.1002/adfm.201700986 ↗
58. Lee DR, Hwang SH, Jeon SK et al (2015) Benzofurocarbazole and benzothienocarbazole as donors for improved quantum efficiency in blue thermally activated delayed fluorescent devices. Chem Commun 51:8105–8107. https://doi.org/10.1039/c5cc01940k10.1039/c5cc01940k ↗
59. Zhang D, Cai M, Zhang Y et al (2016) Sterically shielded blue thermally activated delayed fluorescence emitters with improved efficiency and stability. Mater Horizons 3:145–151. https://doi.org/10.1039/c5mh00258c10.1039/c5mh00258c ↗
60. Choi MK, Yang J, Hyeon T, Kim DH (2018) Flexible quantum dot light-emitting diodes for next-generation displays. npj Flex Electron 2:1–1410.1038/s41528-018-0023-3 ↗
61. Ghamsari MS (2017) Introductory Chapter: Quantum-Dots Based Organic Light-Emitting Diodes - The State-of-the-Art. Quantum-dot Based Light Diodes. https://doi.org/10.5772/intechopen.6974410.5772/intechopen.69744 ↗
62. Hazim A, Abduljalil HM, Hashim A (2020) Analysis of Structural and Electronic Properties of Novel (PMMA/Al2O3, PMMA/Al2O3-Ag, PMMA/ZrO2, PMMA/ZrO2-Ag, PMMA-Ag) Nanocomposites for Low-Cost Electronics and Optics Applications. Trans Electr Electron Mater 21:48–67. https://doi.org/10.1007/s42341-019-00148-010.1007/s42341-019-00148-0 ↗
63. Song J, Kim KH, Kim E et al (2018) Lensfree OLEDs with over 50% external quantum efficiency via external scattering and horizontally oriented emitters. Nat Commun. https://doi.org/10.1038/s41467-018-05671-x10.1038/s41467-018-05671-x ↗
64. Singh J (2012) Organic Light-Emitting Devices, BOD- Books on demand.10.5772/2589 ↗
65. Chandra VK, Chandra BP, Jha P (2014) Organic light - Emitting diodes and their applications. Defect Diffus Forum 357:29–9310.4028/www.scientific.net/DDF.357.29 ↗
66. Will PA, Schwarz EB, Fuchs C et al (2018) Scattering quantified: Evaluation of corrugation induced out-coupling concepts in organic light-emitting diodes. Org Electron 58:250–256. https://doi.org/10.1016/j.orgel.2018.04.01610.1016/j.orgel.2018.04.016 ↗
67. Xie B, Hu R, Yu X et al (2016) Effect of Packaging Method on Performance of Light-Emitting Diodes with Quantum Dot Phosphor. IEEE Photonics Technol Lett 28:1115–1118. https://doi.org/10.1109/LPT.2016.253179410.1109/LPT.2016.2531794 ↗
68. Deshpande R, Pawar O, Kute A (2018) Advancement in the technology of organic light-emitting diodes. Proc 2017 Int Conf Innov Information, Embed Commun Syst ICIIECS 2017 2018-Janua:1–5. https://doi.org/10.1109/ICIIECS.2017.827605410.1109/ICIIECS.2017.8276054 ↗
69. Heydari N, Ghorashi SMB, Han W, Park H-H (2017) Quantum Dot-Based Light Emitting Diodes (QDLEDs): New Progress. Quantum-dot Based Light Diodes. https://doi.org/10.5772/intechopen.6901410.5772/intechopen.69014 ↗
70. Park J, Noh YY, Huh JW et al (2012) Optical and barrier properties of thin-film encapsulations for transparent OLEDs. Org Electron 13:1956–1961. https://doi.org/10.1016/j.orgel.2012.06.01010.1016/j.orgel.2012.06.010 ↗
71. Park S-HK, Hwang C-S, Lee J-I et al (2006) 4.3: Transparent ZnO Thin Film Transistor Array for the Application of Transparent AM-OLED Display. SID Symp Dig Tech Pap Doi 10(1889/1):2433472
72. Sempel A, Büchel M (2002) Design aspects of low power polymer/OLED passive-matrix displays. Org Electron 3:89–92. https://doi.org/10.1016/S1566-1199(02)00036-810.1016/S1566-1199(02)00036-8 ↗
73. Lääperi A (2013) Active-matrix, organic light-emitting diodes (AMOLEDs) for displays. Woodhead Publishing Limited10.1533/9780857098948.3.445 ↗
74. Sabah K.Mahal, Ahmad J.Alimin (2017) Advancement in the technology of liquid desiccant systems.pdf. 191–19910.15866/ireme.v11i3.10953 ↗
75. Jeon WS, Park TJ, Kim KH et al (2010) High-efficiency red phosphorescent organic light-emitting diodes with single-layer structure. Org Electron 11:179–183. https://doi.org/10.1016/j.orgel.2009.10.01010.1016/j.orgel.2009.10.010 ↗
76. Lian H, Shen J, Guo H et al (2019) Recent Advances in the Optimization of Organic Light-Emitting Diodes with Metal-Containing Nanomaterials. Chem Rec 19:1753–1767. https://doi.org/10.1002/tcr.20180020410.1002/tcr.201800204 ↗
77. Tao J, Wang R, Yu H et al (2020) Highly Transparent, Highly Thermally Stable Nanocellulose/Polymer Hybrid Substrates for Flexible OLED Devices. ACS Appl Mater Interfaces 12:9701–9709. https://doi.org/10.1021/acsami.0c0104810.1021/acsami.0c01048 ↗
78. Gaspar DJ, Polikarpov E (2018) OLED fundamentals: materials, device and processing of organic lighting diode 1st edition CRC Press.
79. Wang ZB, Helander MG, Lu ZH (2013) Transparent conducting thin films for OLEDs. Org Light Diodes Mater Devices Appl. https://doi.org/10.1533/9780857098948.1.4910.1533/9780857098948.1.49 ↗
80. Kim SS, Park SP, Kim JH, Im S (2002) Photoelectric and optical properties of pentacene films deposited on n-Si by thermal evaporation. Thin Solid Films 420–421:19–22. https://doi.org/10.1016/S0040-6090(02)00653-310.1016/S0040-6090(02)00653-3 ↗
81. Chen CW, Hsieh PY, Chiang HH et al (2003) Top-emitting organic light-emitting devices using surface-modified Ag anode. Appl Phys Lett 83:5127–5129. https://doi.org/10.1063/1.163507610.1063/1.1635076 ↗
82. Jin YD, Ding XB, Reynaert J et al (2004) Role of LiF in polymer light-emitting diodes with LiF-modified cathodes. Org Electron 5:271–281. https://doi.org/10.1016/j.orgel.2004.08.00110.1016/j.orgel.2004.08.001 ↗
83. C, Choi JW, Kim B su, et al (2021) Efficient cathode contacts through Ag-doping in multifunctional strong nucleophilic electron transport layer for high-performance inverted OLEDs. Org Electron 89:106031. https://doi.org/10.1016/j.orgel.2020.10603110.1016/j.orgel.2020.106031 ↗
84. Han TH, Song W, Lee TW (2015) Elucidating the crucial role of hole injection layer in degradation of organic light-emitting diodes. ACS Appl Mater Interfaces 7:3117–3125. https://doi.org/10.1021/am507262810.1021/am5072628 ↗
85. Shirota Y, Kageyama H (2007) Charge carrier transporting molecular materials and their applications in devices. Chem Rev 107:953–1010. https://doi.org/10.1021/cr050143+10.1021/cr050143+ ↗
86. Sasabe H, Kido J (2013) Development of high-performance OLEDs for general lighting. J Mater Chem C 1:1699–1707. https://doi.org/10.1039/c2tc00584k10.1039/c2tc00584k ↗
87. Kandulna R, Choudhary RB (2017) Robust electron transport properties of PANI/PPY/ZnO polymeric nanocomposites for OLED applications. Optik (Stuttg) 144:40–48. https://doi.org/10.1016/j.ijleo.2017.06.09410.1016/j.ijleo.2017.06.094 ↗
88. Mandal G, Choudhary RB (2019) rGO–Y 2 O 3 intercalated PANI matrix (PANI–rGO–Y 2 O 3) based polymeric nanohybrid material as an electron transport layer for OLED application. Res Chem Intermed. https://doi.org/10.1007/s11164-019-03819-y10.1007/s11164-019-03819-y ↗
89. Kandulna R, Choudhary RB, Singh R, Nayak D (2019) Augmented properties for PPY-PANI-ZnO nanocomposite as electron transport layer material for organic light-emitting diode (OLED) application. AIP Conf Proc. https://doi.org/10.1063/1.511327810.1063/1.5113278 ↗
90. Hu B, Ci Z, Liang L et al (2020) Spiro derivatives as electron-blocking materials for highly stable OLEDs. Org Electron 86:105879. https://doi.org/10.1016/j.orgel.2020.10587910.1016/j.orgel.2020.105879 ↗
91. Hagen JA, Li W, Steckl AJ, Grote JG (2006) Enhanced emission efficiency in organic light-emitting diodes using the deoxyribonucleic acid complex as an electron blocking layer. Appl Phys Lett 88:10–13. https://doi.org/10.1063/1.219797310.1063/1.2197973 ↗
92. Negi S, Mittal P, Kumar B (2018) Impact of different layers on the performance of OLED. Microsyst Technol 24:4981–4989. https://doi.org/10.1007/s00542-018-3918-y10.1007/s00542-018-3918-y ↗
93. Turkoglu G, Cinar ME, Ozturk T (2017) Triarylborane-based materials for OLED applications. Molecules. https://doi.org/10.3390/molecules2209152210.3390/molecules22091522 ↗
94. Sekine C, Tsubata Y, Yamada T et al (2014) Recent progress of high-performance polymer OLED and OPV materials for organic printed electronics. Sci Technol Adv Mater. https://doi.org/10.1088/1468-6996/15/3/03420310.1088/1468-6996/15/3/034203 ↗
95. Erickson NC, Holmes RJ (2013) Investigating the role of emissive layer architecture on the exciton recombination zone in organic light-emitting devices. Adv Funct Mater 23:5190–5198. https://doi.org/10.1002/adfm.20130010110.1002/adfm.201300101 ↗
96. Li X, Cui J, Ba Q et al (2019) Multiphotoluminescence from a Triphenylamine Derivative and Its Application in White Organic Light-Emitting Diodes Based on a Single Emissive Layer. Adv Mater 31:1–8. https://doi.org/10.1002/adma.20190061310.1002/adma.201900613 ↗
97. Friend RH, Gymer RW, Holmes AB et al (1999) Electroluminescence in conjugated polymers. Nature 397:121–128. https://doi.org/10.1038/1639310.1038/16393 ↗
98. Jin J, Lee JJ, Bae BS et al (2012) Silica nanoparticle-embedded sol-gel organic/inorganic hybrid nanocomposite for transparent OLED encapsulation. Org Electron 13:53–57. https://doi.org/10.1016/j.orgel.2011.09.00810.1016/j.orgel.2011.09.008 ↗
99. Park S, Suh M, Kim K et al (2019) Effect of the spatial molecular configuration of ZnO/ polyethyleneimine hybrid electron injection materials on OLEDs performance. Org Electron 75:105427. https://doi.org/10.1016/j.orgel.2019.10542710.1016/j.orgel.2019.105427 ↗
100. Yuan Y, Krüger M (2012) Polymer-nanocrystal hybrid materials for light: Conversion applications. Polymers (Basel) 4:1–19. https://doi.org/10.3390/polym401000110.3390/polym4010001 ↗