A general perspective of Fe–Mn–Al–C steels
Source abstract
Abstract
During the last years, the scientific and industrial community has focused on the astonishing properties of Fe-Mn-Al-C steels. These high advanced steels allow high-density reductions about ~15% lighter than conventional steels, high corrosion resistance, high strength (ultimate tensile strength (UTS) ~1 Gpa) and at the same time ductilities above 60%. The increase of the tensile or yield strength and the ductility at the same time is almost a special feature of this kind of new steels, which makes them so interesting for many applications such as in the automotive, armor and mining industry. The control of these properties depends on a complex relationship between the chemical composition of the steel, the test temperature, the external loads and the processing parameters of the steel. This review has been conceived to tried to elucidate these complex relations and gather the most important aspects of Fe-Mn-Al-C steels developed so far.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Howell RA, Van Aken DC (2009) A literature review of age hardening Fe–Mn–Al–C alloys. Iron Steel Technol 6:193–212
2. Hansoo K, Dong-Woo S, Nack JK (2013) Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties. Sci Technol Adv Mater 14(1):01420510.1088/1468-6996/14/1/014205 ↗
3. Rana R (2014) Low-density steels. JOM 66(9):1730–173310.1007/s11837-014-1137-2 ↗
4. Bartlett L, Van Aken D (2014) High manganese and aluminum steels for the military and transportation industry. JOM 66(9):1770–178410.1007/s11837-014-1068-y ↗
5. Rana R, Lahaye C, Ray RK (2014) Overview of lightweight ferrous materials: strategies and promises. JOM 66(9):1734–174610.1007/s11837-014-1126-5 ↗
6. Zuazo I, Hallstedt B, Lindahl B, Selleby M, Soler M, Etienne A, Perlade A, Hasenpouth D, Massardier-Jourdan V, Cazottes S, Kleber X (2014) Low-density steels: complex metallurgy for automotive applications. JOM 66(9):1747–175810.1007/s11837-014-1084-y ↗
7. Chen S, Rana R, Haldar A, Ray RK (2017) Current state of Fe–Mn–Al–C low density steels. Prog Mater Sci 89:345–39110.1016/j.pmatsci.2017.05.002 ↗
8. Zambrano OA (2017) A general perspective of Fe–Mn–Al–C steels. arXiv preprint https://arxiv.org/abs/1707.01920v2
9. Desch CH (1941) Robert Abbott Hadfield, 1858–1940. Obit Not Fellows R Soc 3(10):647–66410.1098/rsbm.1941.0027 ↗
10. Hadfield RA, Burnham TH (1933) Special steels. Sir I. Pitman & Sons Ltd, New York
11. Hadfield RA (1890) Process of making steel containing carbon, manganese, and aluminium (Patent US422403). Google Patents
12. Ham J, Cairns R Jr (1958) Manganese joins aluminum to give strong stainless. Prod Eng 29(52):50–51
13. Schmatz DJ (1959) Formation of beta manganese-type structure in iron–aluminum manganese alloys. Trans Metall Soc AIME 215:112–114
14. James PJ (1969) Precipitation of the carbide (Fe,Mn)3AlC in an Fe–Al alloy. J Iron Steel Inst 207:54–57
15. Kayak GL (1969) Fe–Mn–Al precipitation-hardening austenitic alloys. Met Sci Heat Treat 11(2):95–9710.1007/BF00652271 ↗
16. Alekseenko MF, Krivonogov GS, Kozyreva LG, Kachanova IM, Arapova LV (1972) Phase composition, structure, and properties of low-density steel 9G28Yu9MVB. Met Sci Heat Treat 14(3):187–18910.1007/BF00690758 ↗
17. Krivonogov G, Alekseenko M, Soloveva G (1975) Phase transformation kinetics of steel 9 G 28 Yu 9 MVB. Phys Met Metallogr 39(4):86–92
18. Remy L, Pineau A (1977) Twinning and strain-induced F.C.C. → H.C.P. transformation in the Fe–Mn–Cr–C system. Mater Sci Eng 28(1):99–10710.1016/0025-5416(77)90093-3 ↗
19. Bhandarkar D, Zackay VF, Parker ER (1972) Stability and mechanical properties of some metastable austenitic steels. Metall Trans 3(10):2619–263110.1007/BF02644238 ↗
20. Chanani GR, Zackay VF, Parker ER (1971) Tensile properties of 0.05 to 0.20 Pct C TRIP steels. Metall Trans 2(1):133–13910.1007/BF02662648 ↗
21. Zackay VF, Parker ER, Fahr D, Busch R (1967) The enhancement of ductility in high-strength steels. ASM Trans Q 60(2):252–259
22. Benz JC, Leavenworth HW Jr (1985) An assessment of Fe–Mn–Al alloys as substitutes for stainless steels. JOM 37(3):36–3910.1007/BF03258661 ↗
23. Tjong SC (1986) Aqueous corrosion properties of austenitic Fe–8.7Al–29.7Mn–1.04C alloy. Surf Coat Technol 28(2):181–18610.1016/0257-8972(86)90056-3 ↗
24. Charles J, Berghezan A (1981) Nickel-free austenitic steels for cryogenic applications: the Fe–23% Mn–5% Al–0.2% C alloys. Cryogenics 21(5):278–28010.1016/0011-2275(81)90003-5 ↗
25. Banerji SK (1981) An update on Fe–Mn–Al steels as a replacement for Ni–Cr stainless steels. In: Nash RT, Gray AG (eds) Conservation and substitution technology for critical materials. https://goo.gl/bcZucf
26. Haddick GT, Thompson LD, Parker ER, Zackay VF (1977) Development of nickel-free austenitic stainless steels for ambient and cryogenic applications. In: Material substitution: availability, energy and environmental factors. Chicago, IL
27. Krishna MSG, Kumar V, Chhaunker PS (1994) Deformation behaviour of a nickel–chromium free austenitic steel. Scr Metall Mater 30(2):219–22210.1016/0956-716X(94)90043-4 ↗
28. Cavallini M, Felli F, Fratesi R, Veniaii F (1982) Aqueous solution corrosion behaviour of “poor man” high manganese–aluminum steels. Mater Corros 33(5):281–28410.1002/maco.19820330506 ↗
29. Banerji SK (1982) The 1982 status report on Fe–Mn–Al-C steels. In: Technical aspects of critical materials use by steel industry. Proceedings of a public workshop. Trends in critical materials requirements for steels of the future. Conservation and substitution technology for chromium, vol II B, p 29
30. Charles J, Berghezan A, Lutts A (1984) High manganese—aluminum austenitic steels for cryogenic applications, some mechanical and physical properties. J Phys Colloq 45(C1):C1-619–C1-62310.1051/jphyscol:19841126 ↗
31. Shih C, Zhang Y, Xu Y, Li Y (1984) An Fe–Mn–Al austenitic steel for cryogenic uses. In: Clark AF, Reed RP (eds) Advances in cryogenic engineering materials, vol 30. Springer, Boston, pp 161–16810.1007/978-1-4613-9868-4_20 ↗
32. Kim YG, Park YS, Han JK (1985) Low temperature mechanical behavior of microalloyed and controlled-rolled Fe–Mn–Al–C-X alloys. Metall Trans A 16(9):1689–169310.1007/BF02663026 ↗
33. Horiuchi T, Ogawa R, Shimada M (1986) Cryogenic Fe–Mn austenitic steels. In: Reed RP, Clark AF (eds) Advances in cryogenic engineering materials. Springer, Boston, pp 33–4210.1007/978-1-4613-9871-4_3 ↗
34. Gnauk J, Soc IFE (2011) In commemoration of Prof. Dr.-Ing. Georg Frommeyer (1943–2010). Ultramicroscopy 111(6):74310.1016/j.ultramic.2011.03.011 ↗
35. Grässel O, Krüger L, Frommeyer G, Meyer LW (2000) High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development—properties—application. Int J Plast 16(10–11):1391–140910.1016/S0749-6419(00)00015-2 ↗
36. Frommeyer G, Drewes EJ, Engl B (2002) Physical and mechanical properties of iron–aluminium–(Mn,Si) lightweight steels. Rev Métall 97(10):1245–125310.1051/metal:2000110 ↗
37. Jiménez JA, Frommeyer G (2010) Microstructure and texture evolution in a high manganes austenitic steel during tensile test. Mater Sci Forum 638:3272–327710.4028/www.scientific.net/MSF.638-642.3272 ↗
38. Jiménez JA, Frommeyer G (2010) Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steel. Mater Charact 61(2):221–22610.1016/j.matchar.2009.11.013 ↗
39. Grässel O, Frommeyer G, Derder C, Hofmann H (1997) Phase transformations and mechanical properties of Fe–Mn–Si–Al TRIP-steels. J Phys IV Fr 07(C5):C5-383–C5-38810.1051/jp4:1997560 ↗
40. Grässel O, Frommeyer G (2013) Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe–Mn–Si–AI steels. Mater Sci Technol 14(12):1213–121710.1179/mst.1998.14.12.1213 ↗
41. Frommeyer G, Brüx U, Neumann P (2003) Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes. ISIJ Int 43(3):438–44610.2355/isijinternational.43.438 ↗
42. Frommeyer G, Grässel O (2002) Light constructional steel and the use thereof. Google Patents
43. Frommeyer GDI, Graessel ODI (1999) Leichtbaustahl und seine Verwendung lightweight steel and its use Germany Patent DE19727759 A1. Google Patents
44. Frommeyer G, Graessel O (2000) Verwendung eines Leichtbaustahls using a lightweight structural steel Germany Patent DE19727759 C2. Google Patents
45. Cheng W-C, Liu C-F, Lai Y-F (2003) The role carbon plays in the martensitic phase transformation of an Fe–Mn–Al alloy. Scr Mater 48(3):295–30010.1016/S1359-6462(02)00378-0 ↗
46. Cheng W-C, Liu C-F, Lai Y-F (2002) Observing the D03 phase in Fe–Mn–Al alloys. Mater Sci Eng A 337(1–2):281–28610.1016/S0921-5093(02)00047-3 ↗
47. Cheng W-C, Lin Y-S, Chen K-F (2014) The formation of ferrite quenching twins in a body-centered cubic Fe–Mn–Al alloy during high-temperature quenching. Scr Mater 81:36–3910.1016/j.scriptamat.2014.02.021 ↗
48. Cheng W-C, Lin H-Y, Liu C-F (2002) Observing the massive transformation in an Fe–Mn–Al alloy. Mater Sci Eng A 335(1–2):82–8810.1016/S0921-5093(01)01947-5 ↗
49. Cheng W-C, Lin H-Y (2002) The precipitation of FCC phase from BCC matrix in an Fe–Mn–Al alloy. Mater Sci Eng A 323(1–2):462–46610.1016/S0921-5093(01)01498-8 ↗
50. Cheng W-C, Li Y-C (2012) The coexistence of two different pearlites, lamellae of (ferrite + M3C), and lamellae of (ferrite + M23C6) in a Mn–Al steel. Metall Mater Trans A 43(6):1817–182510.1007/s11661-011-1051-y ↗
51. Cheng W-C, Lai C-K (2006) Observing massive phase transformation in a Fe–Mn–Al alloy. Scr Mater 55(9):783–78610.1016/j.scriptamat.2006.07.023 ↗
52. Cheng W-C, Song Y-S, Lin Y-S, Chen K-F, Pistorius PC (2013) On the eutectoid reaction in a quaternary Fe–C–Mn–Al alloy: austenite → ferrite + kappa-carbide + M23C6 carbide. Metall Mater Trans A 45(3):1199–121610.1007/s11661-013-2083-2 ↗
53. Cheng W-C, Cheng C-Y, Hsu C-W, Laughlin DE (2015) Phase transformation of the L12 phase to kappa-carbide after spinodal decomposition and ordering in an Fe–C–Mn–Al austenitic steel. Mater Sci Eng A 642:128–13510.1016/j.msea.2015.06.096 ↗
54. Cheng WC, Lee KH, Lin SM, Chien SY (2017) The observation of austenite to ferrite martensitic transformation in an Fe–Mn–Al austenitic steel after cooling from high temperature. Mater Sci Forum 879:335–33810.4028/www.scientific.net/MSF.879.335 ↗
55. Cheng W-C (2014) Phase transformations of an Fe–0.85C–17.9Mn–7.1Al austenitic steel after quenching and annealing. JOM 66(9):1809–182010.1007/s11837-014-1088-7 ↗
56. Cheng W-C (2005) Formation of a new phase after high-temperature annealing and air cooling of an Fe–Mn–Al alloy. Metall Mater Trans A 36(7):1737–174310.1007/s11661-005-0038-y ↗
57. Gutierrez-Urrutia I, Raabe D (2012) Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel. Acta Mater 60(16):5791–580210.1016/j.actamat.2012.07.018 ↗
58. Gutierrez-Urrutia I, Raabe D (2012) Grain size effect on strain hardening in twinning-induced plasticity steels. Scr Mater 66(12):992–99610.1016/j.scriptamat.2012.01.037 ↗
59. Gutierrez-Urrutia I, Raabe D (2013) Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels. Scr Mater 68(6):343–34710.1016/j.scriptamat.2012.08.038 ↗
60. Gutierrez-Urrutia I, Raabe D (2013) Microbanding mechanism in an Fe–Mn–C high-Mn twinning-induced plasticity steel. Scr Mater 69(1):53–5610.1016/j.scriptamat.2013.03.010 ↗
61. Gutierrez-Urrutia I, Raabe D (2014) High strength and ductile low density austenitic FeMnAlC steels: simplex and alloys strengthened by nanoscale ordered carbides. Mater Sci Technol 30(9):1099–110410.1179/1743284714Y.0000000515 ↗
62. Gutierrez-Urrutia I, Zaefferer S, Raabe D (2010) The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel. Mater Sci Eng A 527(15):3552–356010.1016/j.msea.2010.02.041 ↗
63. Herbig M, Kuzmina M, Haase C, Marceau RKW, Gutierrez-Urrutia I, Haley D, Molodov DA, Choi P, Raabe D (2015) Grain boundary segregation in Fe–Mn–C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography. Acta Mater 83:37–4710.1016/j.actamat.2014.09.041 ↗
64. Hickel T, Sandlöbes S, Marceau RKW, Dick A, Bleskov I, Neugebauer J, Raabe D (2014) Impact of nanodiffusion on the stacking fault energy in high-strength steels. Acta Mater 75:147–15510.1016/j.actamat.2014.04.062 ↗
65. Raabe D, Ponge D, Dmitrieva O, Sander B (2009) Designing ultrahigh strength steels with good ductility by combining transformation induced plasticity and martensite aging. Adv Eng Mater 11(7):547–55510.1002/adem.200900061 ↗
66. Raabe D, Roters F, Neugebauer J, Gutierrez-Urrutia I, Hickel T, Bleck W, Schneider JM, Wittig JE, Mayer J (2016) Ab initio-guided design of twinning-induced plasticity steels. MRS Bull 41(04):320–32510.1557/mrs.2016.63 ↗
67. Raabe D, Springer H, Gutierrez-Urrutia I, Roters F, Bausch M, Seol JB, Koyama M, Choi PP, Tsuzaki K (2014) Alloy design, combinatorial synthesis, and microstructure–property relations for low-density Fe–Mn–Al–C austenitic steels. JOM 66(9):1845–185610.1007/s11837-014-1032-x ↗
68. Seol J-B, Raabe D, Choi P, Park H-S, Kwak JH, Park C-G (2013) Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe–Mn–Al–C alloy studied by transmission electron microscopy and atom probe tomography. Scr Mater 68(6):348–35310.1016/j.scriptamat.2012.08.013 ↗
69. Springer H, Raabe D (2012) Rapid alloy prototyping: compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn–1.2C–xAl triplex steels. Acta Mater 60(12):4950–495910.1016/j.actamat.2012.05.017 ↗
70. Welsch E, Ponge D, Hafez Haghighat SM, Sandlöbes S, Choi P, Herbig M, Zaefferer S, Raabe D (2016) Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel. Acta Mater 116:188–19910.1016/j.actamat.2016.06.037 ↗
71. Wong SL, Madivala M, Prahl U, Roters F, Raabe D (2016) A crystal plasticity model for twinning- and transformation-induced plasticity. Acta Mater 118:140–15110.1016/j.actamat.2016.07.032 ↗
72. Yao MJ, Dey P, Seol JB, Choi P, Herbig M, Marceau RKW, Hickel T, Neugebauer J, Raabe D (2016) Combined atom probe tomography and density functional theory investigation of the Al off-stoichiometry of κ-carbides in an austenitic Fe–Mn–Al–C low density steel. Acta Mater 106:229–23810.1016/j.actamat.2016.01.007 ↗
73. Yao MJ, Welsch E, Ponge D, Haghighat SMH, Sandlöbes S, Choi P, Herbig M, Bleskov I, Hickel T, Lipinska-Chwalek M, Shanthraj P, Scheu C, Zaefferer S, Gault B, Raabe D (2017) Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel. Acta Mater 140:258–27310.1016/j.actamat.2017.08.049 ↗
74. Koyama M, Akiyama E, Lee YK, Raabe D, Tsuzaki K (2017) Overview of hydrogen embrittlement in high-Mn steels. Int J Hydrog Energy 42(17):12706–1272310.1016/j.ijhydene.2017.02.214 ↗
75. Yang WS, Wu TB, Wan CM (1990) Structure determination of the needle like precipitates in an alloy of Fe–29Mn–8Al–0.06C. Scr Metall Mater 24(5):895–90010.1016/0956-716X(90)90132-Z ↗
76. Sato A, Soma K, Mori T (1982) Hardening due to pre-existing ϵ-martensite in an Fe–30Mn–1Si alloy single crystal. Acta Metall 30(10):1901–190710.1016/0001-6160(82)90030-X ↗
77. Wang R, Straszheim MJ, Rapp RA (1984) A high-temperature oxidation-resistant Fe–Mn–Al–Si alloy. Oxid Met 21(1–2):71–7910.1007/BF00659468 ↗
78. Kao CH, Wan CM (1988) Effect of manganese on the oxidation of Fe–Mn–Al–C alloys. J Mater Sci 23(2):744–752. https://doi.org/10.1007/BF0117471510.1007/BF01174715 ↗
79. Chu CM, Huang H, Kao PW, Gan D (1994) Effect of alloying chemistry on the lattice constant of austenitic Fe–Mn–Al–C alloys. Scr Metall Mater 30(4):505–50810.1016/0956-716X(94)90611-4 ↗
80. Ishida K, Ohtani H, Satoh N, Kainuma R, Nishizawa T (1990) Phase equilibria in Fe–Mn–Al–C alloys. ISIJ Int 30(8):680–68610.2355/isijinternational.30.680 ↗
81. Goretskii G, Gorev K (1990) Phase equilibria in the Fe–Mn–Al–C alloys. Izv Akad Nauk SSSR Met 2:218–222
82. Shao CW, Zhang P, Liu R, Zhang ZJ, Pang JC, Zhang ZF (2016) Low-cycle and extremely-low-cycle fatigue behaviors of high-Mn austenitic TRIP/TWIP alloys: property evaluation, damage mechanisms and life prediction. Acta Mater 103:781–79510.1016/j.actamat.2015.11.015 ↗
83. Chen L, Zhao Y, Qin X (2013) Some aspects of high manganese twinning-induced plasticity (TWIP) steel, a review. Acta Metallurgica Sinica (English Letters) 26(1):1–1510.1007/s40195-012-0501-x ↗
84. Heo Y-U, Song Y-Y, Park S-J, Bhadeshia HKDH, Suh D-W (2012) Influence of silicon in low density Fe–C–Mn–Al steel. Metall Mater Trans A 43(6):1731–173510.1007/s11661-012-1149-x ↗
85. Bartlett LN, Van Aken DC, Medvedeva J, Isheim D, Medvedeva NI, Song K (2014) An atom probe study of kappa carbide precipitation and the effect of silicon addition. Metall Mater Trans A 45(5):2421–243510.1007/s11661-014-2187-3 ↗
86. Acselrad O, Simao RA, Pereira LC, Achete CA, Kalashnikov IS, Silva EM (2002) Phase transformations in FeMnAlC austenitic steels with Si addition. Metall Mater Trans A 33(11):3569–357310.1007/s11661-002-0345-5 ↗
87. Ikarashi Y, Sato K, Yamazaki T, Inoue Y, Yamanaka M (1992) Age-hardening and formation of modulated structures in austenitic Fe–Mn–Al–C alloys. J Mater Sci Lett 11(11):733–73510.1007/BF00729475 ↗
88. Sato K, Tagawa K, Inoue Y (1990) Modulated structure and magnetic properties of age-hardenable Fe–Mn–Al–C alloys. Metall Trans A 21(1):5–1110.1007/BF02656419 ↗
89. Sato K, Tagawa K, Inoue Y (1989) Spinodal decomposition and mechanical properties of an austenitic Fe–30wt.%Mn–9wt.%Al–0.9wt.%C alloy. Mater Sci Eng A 111:45–5010.1016/0921-5093(89)90196-2 ↗
90. Han KH, Choo WK, Laughlin DE (1988) A further contribution to the phase constitution in (Fe0.65Mn0.35)0.83Al0.17-XC pseudo-binary system. Scr Metall 22(12):1873–187810.1016/S0036-9748(88)80229-1 ↗
91. Li MC, Chang H, Kao PW, Gan D (1999) The effect of Mn and Al contents on the solvus of κ phase in austenitic Fe–Mn–Al–C alloys. Mater Chem Phys 59(1):96–9910.1016/S0254-0584(99)00026-7 ↗
92. Tsay G, Tuan Y, Lin C, Chao C, Liu T (2011) Effect of carbon on spinodal decomposition in Fe–26Mn–20Al–C alloys. Mater Trans 52(3):521–52510.2320/matertrans.M2010255 ↗
93. Tjong SC (1990) Electron microscope observations of phase decompositions in an austenitic Fe–8.7Al–29.7Mn–1.04C alloy. Mater Charact 24(3):275–29210.1016/1044-5803(90)90055-O ↗
94. Rigaud V, Daloz D, Drillet J, Perlade A, Maugis P, Lesoult G (2007) Phases equilibrium study in quaternary iron-rich Fe–Mn–Al–C alloys. ISIJ Int 47(6):898–90610.2355/isijinternational.47.898 ↗
95. Moon J, Park S-J, Jang JH, Lee T-H, Lee C-H, Hong H-U, Suh D-W, Kim SH, Han HN, Lee BH (2017) Atomistic investigations of κ-carbide precipitation in austenitic Fe–Mn–Al–C lightweight steels and the effect of Mo addition. Scr Mater 127:97–10110.1016/j.scriptamat.2016.08.036 ↗
96. Sutou Y, Kamiya N, Umino R, Ohnuma I, Ishida K (2010) High-strength Fe–20Mn–Al–C-based alloys with low density. ISIJ Int 50(6):893–89910.2355/isijinternational.50.893 ↗
97. Sohn SS, Song H, Kwak JH, Lee S (2017) Dramatic improvement of strain hardening and ductility to 95% in highly-deformable high-strength duplex lightweight steels. Sci Rep 7(1):192710.1038/s41598-017-02183-4 ↗
98. Sohn SS, Song H, Jo MC, Song T, Kim HS, Lee S (2017) Novel 1.5 GPa-strength with 50%-ductility by transformation-induced plasticity of non-recrystallized austenite in duplex steels. Sci Rep 7(1):125510.1038/s41598-017-01514-9 ↗
99. Yoo JD, Hwang SW, Park KT (2009) Origin of extended tensile ductility of a Fe–28Mn–10Al–1C steel. Metall Mater Trans A 40(7):1520–152310.1007/s11661-009-9862-9 ↗
100. Yoo JD, Park K-T (2008) Microband-induced plasticity in a high Mn–Al–C light steel. Mater Sci Eng A 496(1–2):417–42410.1016/j.msea.2008.05.042 ↗