Stereolithography of structural complex ceramic parts
Source abstract
Abstract
A cost-effective method of complex ceramic parts manufacturing using stereolithography has been developed. The process consists in fabricating ceramic pieces by laser polymerization of an UV curable monomeric system, subsequent removal of organic components and sintering. Highly concentrated suspensions of well dispersed ceramic particles (up to 60 vol%) in a reactive acrylic monomer, with a suitable rheological behaviour for the spreading of thin layers (down to 25 μm) were defined. Adequate cured depth (higher than 200 μm) is obtained even at high scanning speeds. Nevertheless, a compromise has to be found between the cured depth and the cured width to improve the dimensional resolution. The dimensional resolution reached on alumina partterns is about 200 μm with an energy density of 0.05 J · cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. C. HINCZEWSKI, S. CORBEL and T. CHARTIER, J. Eur. Ceram. Soc. 18 (1998) 583.10.1016/S0955-2219(97)00186-6 ↗
2. Idem., J. Rapid Prototyping. 4(3) (1998) 104.10.1108/13552549810222867 ↗
3. M. L. GRIFFITH and J. W. HALLORAN, J. Amer. Ceram. Soc. 79(10) (1996) 2601.10.1111/j.1151-2916.1996.tb09022.x ↗
4. H. LIAO and T. W. COYLE, J. Canadian Ceram. Soc. 65(4) (1996) 254.
5. G. A. BRADY, T. M. CHU and J. W. HALLORAN, in Proceedings of the Solid Freeform Fabrication Symposium (University of Texas, Austin, 1996) p. 403.
6. M. L. GRIFFITH, T. M. CHU, W. C. WAGNER and J. W. HALLORAN, in Proceedings of the Solid Freeform Fabrication Symposium (University of Texas, Austin, 1995) p. 31.
7. C. HINCZEWSKI, PhD Thesis, Institut National Polytechnique de Lorraine, France, 1998.