The structure, microphase-separated morphology, and property of polyurethanes and polyureas
Source abstract
Abstract
The structure–morphology–property relationship of thermoplastic polyurethanes and polyureas was reviewed. The effect of hard segment structure and chemistry, and the hydrogen bonding on the morphology and properties of polyurethanes elastomers was presented. Special attention was made on polyureas with strong bidentate hydrogen bonding, and they are important candidates for thermoplastic elastomers with processibility by careful selection of the hard segment symmetry and hydrogen bonding capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer composites and self-healing · Polymer Nanocomposites and Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Aneja A, Wilkes GL, Rightor EG (2003) Study of slabstock flexible polyurethane foams based on varied toluene diisocyanate isomer ratios. J Polym Sci Polym Phys 41:258–26810.1002/polb.10363 ↗
2. Heintz AM, Duffy DJ, Nelson CM, Hua Y, Hsu SL, Suen W et al (2005) A spectroscopic analysis of the phase evolution in polyurethane foams. Macromolecules 38:9192–919910.1021/ma051599w ↗
3. Kim YH, Lee JW, Choi SJ, Han MS, Kim JM, Vim SB et al (2007) Properties of rigid polyurethane foams blown by HFC-365mfc and distilled water. J Ind Eng Chem 13:1076–1082
4. Shimizu K, Abel M-L, Phanopoulos C, Holvoet S, Watts J (2012) The characterisation of the interfacial chemistry of adhesion of rigid polyurethane foam to aluminium. J Mater Sci 47:902–918. doi: 10.1007/s10853-011-5871-310.1007/s10853-011-5871-3 ↗
5. Grujicic A, LaBerge M, Grujicic M, Pandurangan B, Runt J, Tarter J et al (2012) Potential improvements in shock-mitigation efficacy of a polyurea-augmented advanced combat helmet. J Mater Eng Perform 21:1562–157910.1007/s11665-011-0065-3 ↗
6. Gooch A, Nedolisa C, Houton KA, Lindsay CI, Saiani A, Wilson AJ (2012) Tunable self-assembled elastomers using triply hydrogen-bonded arrays. Macromolecules 45:4723–472910.1021/ma3001109 ↗
7. Choi T, Fragiadakis D, Roland CM, Runt J (2012) Microstructure and segmental dynamics of polyurea under uniaxial deformation. Macromolecules 45:3581–358910.1021/ma300128d ↗
8. Rinaldi RG, Hsieh AJ, Boyce MC (2011) Tunable microstructures and mechanical deformation in transparent poly(urethane urea)s. J Polym Sci Polym Phys 49:123–13510.1002/polb.22128 ↗
9. Grujicic M, Pandurangan B, King AE, Runt J, Tarter J, Dillon G (2011) Multi-length scale modeling and analysis of microstructure evolution and mechanical properties in polyurea. J Mater Sci 46:1767–1779. doi: 10.1007/s10853-010-4998-y10.1007/s10853-010-4998-y ↗
10. Yilgor E, Isik M, Yilgor I (2010) Novel synthetic approach for the preparation of poly(urethaneurea) elastomers. Macromolecules 43:8588–859310.1021/ma101770k ↗
11. Woodward PJ, Hermida Merino D, Greenland BW, Hamley IW, Light Z, Slark AT et al (2010) Hydrogen bonded supramolecular elastomers: correlating hydrogen bonding strength with morphology and rheology. Macromolecules 43:2512–251710.1021/ma9027646 ↗
12. Pathak JA, Twigg JN, Nugent KE, Ho DL, Lin EK, Mott PH et al (2008) Structure evolution in a polyurea segmented block copolymer because of mechanical deformation. Macromolecules 41:7543–754810.1021/ma8011009 ↗
13. Yilgor I, Yilgor E (2007) Structure–morphology–property behavior of segmented thermoplastic polyurethanes and polyureas prepared without chain extenders. Polym Rev 47:487–51010.1080/15583720701638260 ↗
14. Krol P, Pilch-Pitera B (2007) Phase structure and thermal stability of crosslinked polyurethane elastomers based on well-defined prepolymers. J Appl Polym Sci 104:1464–147410.1002/app.25011 ↗
15. Wisse E, Govaert LE, Meijer HEH, Meijer EW (2006) Unusual tuning of mechanical properties of thermoplastic elastomers using supramolecular fillers. Macromolecules 39:7425–743210.1021/ma060986i ↗
16. Koevoets RA, Versteegen RM, Kooijman H, Spek AL, Sijbesma RP, Meijer EW (2005) Molecular recognition in a thermoplastic elastomer. J Am Chem Soc 127:2999–300310.1021/ja0451160 ↗
17. Oprea S (2011) Effect of the long chain extender on the properties of linear and castor oil cross-linked PEG-based polyurethane elastomers. J Mater Sci 46:2251–2258 10.1007/s10853-010-5064-510.1007/s10853-010-5064-5 ↗
18. Mi H-Y, Jing X, Salick M, Cordie T, Peng X-F, Turng L-S (2014) Morphology, mechanical properties, and mineralization of rigid thermoplastic polyurethane/hydroxyapatite scaffolds for bone tissue applications: effects of fabrication approaches and hydroxyapatite size. J Mater Sci 49:2324–2337. doi: 10.1007/s10853-013-7931-310.1007/s10853-013-7931-3 ↗
19. Driffield M, Bradley EL, Castle L (2007) A method of test for residual isophorone diisocyanate trimer in new polyester–polyurethane coatings on light metal packaging using liquid chromatography with tandem mass spectrometric detection. J Chromatogr A 1141:61–6610.1016/j.chroma.2006.12.005 ↗
20. Chattopadhyay DK, Raju KVSN (2007) Structural engineering of polyurethane coatings for high performance applications. Prog Polym Sci 32:352–41810.1016/j.progpolymsci.2006.05.003 ↗
21. Bogoslovov RB, Roland CM, Gamache RM (2007) Impact-induced glass transition in elastomeric coatings. Appl Phys Lett 90(22):22191010.1063/1.2745212 ↗
22. Chattopadhyay DK, Sreedhar B, Raju KVSN (2005) Thermal stability of chemically crosslinked moisture-cured polyurethane coatings. J Appl Polym Sci 95:1509–151810.1002/app.21404 ↗
23. Guan SW (2003) 100% solids polyurethane and polyurea coatings technology. Coatings World p 49
24. Li CH, Wilkes GL (2001) Silicone/amine resin hybrid materials as abrasion resistant coatings. Chem Mater 13:3663–366810.1021/cm0101024 ↗
25. Courtois J, Baroudi I, Nouvel N, Degrandi E, Pensec S, Ducouret G et al (2010) Supramolecular soft adhesive materials. Adv Funct Mater 20:1803–181110.1002/adfm.200901903 ↗
26. Lim JY, Hansen JC, Siedlecki CA, Runt J, Donahue HJ (2005) Human foetal osteoblastic cell response to polymer-demixed nanotopographic interfaces. J R Soc Interface 2:97–10810.1098/rsif.2004.0019 ↗
27. Nakamae K, Nishino T, Asaoka S, Sudaryanto (1996) Microphase separation and surface properties of segmented polyurethane—effect of hard segment content. Int J Adhes Adhes 16:233–23910.1016/S0143-7496(96)00009-7 ↗
28. Hernandez R, Weksler J, Padsalgikar A, Runt J (2008) In vitro oxidation of high polydimethylsiloxane content biomedical polyurethanes: correlation with the microstructure. J Biomed Mater Res A 87A:546–55610.1002/jbm.a.31823 ↗
29. Fernández d’Arlas B, Rueda L, de la Caba K, Mondragon I, Eceiza A (2008) Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI. Polym Eng Sci 48:519–52910.1002/pen.20983 ↗
30. Simmons A, Hyvarinen J, Odell RA, Martin DJ, Gunatillake PA, Noble KR et al (2004) Long-term in vivo biostability of poly(dimethylsiloxane)/poly(hexamethylene oxide) mixed macrodiol-based polyurethane elastomers. Biomaterials 25:4887–490010.1016/j.biomaterials.2004.01.004 ↗
31. Christenson EM, Dadsetan M, Wiggins M, Anderson JM, Hiltner A (2004) Poly(carbonate urethane) and poly(ether urethane) biodegradation: in vivo studies. J Biomed Mater Res A 69A:407–41610.1002/jbm.a.30002 ↗
32. Wu LM, Weisberg DM, Runt J, Felder G, Snyder AJ, Rosenberg G (1999) An investigation of the in vivo stability of poly(ether urethaneurea) blood sacs. J Biomed Mater Res 44:371–38010.1002/(SICI)1097-4636(19990315)44:4<371::AID-JBM2>3.0.CO;2-I ↗
33. Bayer O (1947) Das di-isocyanat-polyadditionsverfahren (polyurethane). Angew Chem 59:257–27210.1002/ange.19470590901 ↗
34. Delebecq E, Pascault JP, Boutevin B, Ganachaud F (2013) On the versatility of urethane/urea bonds: reversibility, blocked isocyanate, and non-isocyanate polyurethane. Chem Rev 113:80–11810.1021/cr300195n ↗
35. Leicher S, Will J, Haugen H, Wintermantel E (2005) MuCell® technology for injection molding: a processing method for polyether-urethane scaffolds. J Mater Sci 40:4613–4618. doi: 10.1007/s10853-005-0853-y10.1007/s10853-005-0853-y ↗
36. Schollenberger CS (1962) Polyurethan VC, a virtually crosslinked elastomer. Rubber Chem Technol 35:74210.5254/1.3539953 ↗
37. Cooper SL, Tobolsky AV (1966) Properties of linear elastomeric polyurethanes. J Appl Polym Sci 10:1837–184410.1002/app.1966.070101204 ↗
38. Goering H, Kruger H, Bauer M (2000) Multimodal polymer networks: design and characterisation of nanoheterogeneous PU elastomers. Macromol Mater Eng 278:23–3510.1002/(SICI)1439-2054(20000501)278:1<23::AID-MAME23>3.0.CO;2-P ↗
39. Hansen CM (1969) The universality of the solubility parameter. Ind Eng Chem Prod Res Dev 8:2–1110.1021/i360029a002 ↗
40. Hansen CM (2004) 50 years with solubility parameters—past and future. Prog Org Coat 51:77–8410.1016/j.porgcoat.2004.05.004 ↗
41. Camberlin Y, Pascault JP (1984) Phase segregation kinetics in segmented linear polyurethanes: relations between equilibrium time and chain mobility and between equilibrium degree of segregation and interaction parameter. J Polym Sci Polym Phys 22:1835–184410.1002/pol.1984.180221011 ↗
42. Paik Sung CS, Hu CB, Wu CS (1980) Properties of segmented poly(urethaneureas) based on 2,4-toluene diisocyanate. 1. Thermal transitions, X-ray studies, and comparison with segmented poly(urethanes). Macromolecules 13:111–11610.1021/ma60073a022 ↗
43. Abouzahr S, Wilkes GL (1984) Structure property studies of polyester-based and polyether-based MDI-BD segmented polyurethanes-effect of one-stage vs two-stage polymerization conditions. J Appl Polym Sci 29:2695–271110.1002/app.1984.070290902 ↗
44. Yilgor I, Eynur T, Bilgin S, Yilgor E, Wilkes GL (2011) Influence of soft segment molecular weight on the mechanical hysteresis and set behavior of silicone-urea copolymers with low hard segment contents. Polymer 52:266–27410.1016/j.polymer.2010.11.040 ↗
45. Yilgor E, Eynur T, Kosak C, Bilgin S, Yilgor I, Malay O et al (2011) Fumed silica filled poly(dimethylsiloxane-urea) segmented copolymers: preparation and properties. Polymer 52:4189–419810.1016/j.polymer.2011.07.041 ↗
46. Choi T, Weksler J, Padsalgikar A, Runt J (2010) Microstructural organization of polydimethylsiloxane soft segment polyurethanes derived from a single macrodiol. Polymer 51:4375–438210.1016/j.polymer.2010.07.030 ↗
47. Yilgor I, Eynur T, Yilgor E, Wilkes GL (2009) Contribution of soft segment entanglement on the tensile properties of silicone–urea copolymers with low hard segment contents. Polymer 50:4432–443710.1016/j.polymer.2009.07.016 ↗
48. Pongkitwitoon S, Hernandez R, Weksler J, Padsalgikar A, Choi T, Runt J (2009) Temperature dependent microphase mixing of model polyurethanes with different intersegment compatibilities. Polymer 50:6305–631110.1016/j.polymer.2009.10.067 ↗
49. Choi T, Weksler J, Padsalgikar A, Runt J (2009) Influence of soft segment composition on phase-separated microstructure of polydimethylsiloxane-based segmented polyurethane copolymers. Polymer 50:2320–232710.1016/j.polymer.2009.03.024 ↗
50. Hernandez R, Weksler J, Padsalgikar A, Choi T, Angelo E, Lin JS et al (2008) A comparison of phase organization of model segmented polyurethanes with different intersegment compatibilities. Macromolecules 41:9767–977610.1021/ma8014454 ↗
51. Hernandez R, Weksler J, Padsalgikar A, Runt J (2007) Microstructural organization of three-phase polydimethylsiloxane-based segmented polyurethanes. Macromolecules 40:5441–544910.1021/ma070767c ↗
52. Ni Y, Becquart F, Chen J, Taha M (2013) Polyurea–urethane supramolecular thermo-reversible networks. Macromolecules 46:1066–107410.1021/ma302421r ↗
53. Yilgor I, Yilgor E, Das S, Wilkes GL (2009) Time-dependent morphology development in segmented polyetherurea copolymers based on aromatic diisocyanates. J Polym Sci Polym Phys 47:471–48310.1002/polb.21652 ↗
54. Yilgor I, Yilgor E, Guler IG, Ward TC, Wilkes GL (2006) FTIR investigation of the influence of diisocyanate symmetry on the morphology development in model segmented polyurethanes. Polymer 47:4105–411410.1016/j.polymer.2006.02.027 ↗
55. Garrett JT, Xu RJ, Cho JD, Runt J (2003) Phase separation of diamine chain-extended poly(urethane) copolymers: FTIR spectroscopy and phase transitions. Polymer 44:2711–271910.1016/S0032-3861(03)00165-4 ↗
56. Yilgor E, Yurtsever E, Yilgor I (2002) Hydrogen bonding and polyurethane morphology. II. Spectroscopic, thermal and crystallization behavior of polyether blends with 1,3-dimethylurea and a model urethane compound. Polymer 43:6561–656810.1016/S0032-3861(02)00566-9 ↗
57. Rueda-Larraz L, d’Arlas BF, Tercjak A, Ribes A, Mondragon I, Eceiza A (2009) Synthesis and microstructure–mechanical property relationships of segmented polyurethanes based on a PCL–PTHF–PCL block copolymer as soft segment. Eur Polym J 45:2096–210910.1016/j.eurpolymj.2009.03.013 ↗
58. Saiani A, Novak A, Rodier L, Eeckhaut G, Leenslag JW, Higgins JS (2007) Origin of multiple melting endotherms in a high hard block content polyurethane: effect of annealing temperature. Macromolecules 40:7252–726210.1021/ma070332p ↗
59. Bassi M, Tonelli C, Di Meo A (2003) Glass transition behavior of a microphase segregated polyurethane based on PFPE and IPDI. A calorimetric study. Macromolecules 36:8015–802310.1021/ma034674g ↗
60. Saiani A, Daunch WA, Verbeke H, Leenslag JW, Higgins JS (2001) Origin of multiple melting endotherms in a high hard block content polyurethane. 1. Thermodynamic investigation. Macromolecules 34:9059–906810.1021/ma0105993 ↗
61. Chen TK, Shieh TS, Chui JY (1998) Studies on the first DSC endotherm of polyurethane hard segment based on 4,4′-diphenylmethane diisocyanate and 1,4-butanediol. Macromolecules 31:1312–132010.1021/ma970913m ↗
62. Martin DJ, Meijs GF, Gunatillake PA, McCarthy SJ, Renwick GM (1997) The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. 2. SAXS-DSC annealing study. J Appl Polym Sci 64:803–81710.1002/(SICI)1097-4628(19970425)64:4<803::AID-APP20>3.0.CO;2-T ↗
63. Hu WC, Koberstein JT (1994) The effect of thermal annealing on the thermal properties and molecular weight of a segmented polyurethane copolymer. J Polym Sci Polym Phys 32:437–44610.1002/polb.1994.090320304 ↗
64. Laity PR, Taylor JE, Wong SS, Khunkamchoo P, Norris K, Cable M et al (2004) A 2-dimensional small-angle X-ray scattering study of the microphase-separated morphology exhibited by thermoplastic polyurethanes and its response to deformation. Polymer 45:5215–523210.1016/j.polymer.2004.05.032 ↗
65. Laity PR, Taylor JE, Wong SS, Khunkamchoo P, Norris K, Cable M et al (2004) A review of small-angle scattering models for random segmented poly(ether-urethane) copolymers. Polymer 45:7273–729110.1016/j.polymer.2004.08.033 ↗
66. Yeh F, Hsiao BS, Sauer BB, Michel S, Siesler HW (2003) In-situ studies of structure development during deformation of a segmented poly(urethane-urea) elastomer. Macromolecules 36:1940–195410.1021/ma0214456 ↗
67. Chu B, Hsiao BS (2001) Small-angle X-ray scattering of polymers. Chem Rev 101:1727–176210.1021/cr9900376 ↗
68. Musselman SG, Santosusso TM, Barnes JD, Sperling LH (1999) Domain structure and interphase dimensions in poly(urethaneurea) elastomers using DSC and SAXS. J Polym Sci Polym Phys 37:2586–260010.1002/(SICI)1099-0488(19990915)37:18<2586::AID-POLB4>3.0.CO;2-A ↗
69. Chang SL, Yu TL, Huang CC, Chen WC, Linliu K, Lin TL (1998) Effect of polyester side-chains on the phase segregation of polyurethanes using small-angle X-ray scattering. Polymer 39:3479–348910.1016/S0032-3861(97)10070-2 ↗
70. Wilkes GL (1975) Kinetic behavior of the thermal and mechanical properties of segmented urethanes. J Appl Phys 46:4148–415210.1063/1.321440 ↗
71. Chu B, Gao T, Li YJ, Wang J, Desper CR, Byrne CA (1992) Microphase separation kinetics in segmented polyurethanes—effects of soft segment length and structure. Macromolecules 25:5724–572910.1021/ma00047a025 ↗
72. Lee HS, Hsu SL (1989) An analysis of phase-separation kinetics of model polyurethanes. Macromolecules 22:1100–110510.1021/ma00193a017 ↗
73. Garrett JT, Lin JS, Runt J (2002) Influence of preparation conditions on microdomain formation in poly(urethane urea) block copolymers. Macromolecules 35:161–16810.1021/ma010915d ↗
74. Ahn TO, Choi IS, Jeong HM, Cho K (1993) Thermal and mechanical-properties of thermoplastic polyurethane elastomers from different polymerization methods. Polym Int 31:329–33310.1002/pi.4990310404 ↗
75. Peebles LH (1974) Sequence length distribution in segmented block copolymers. Macromolecules 7:872–88210.1021/ma60042a034 ↗
76. Peebles LH (1976) Hard block length distribution in segmented block copolymers. Macromolecules 9:58–6110.1021/ma60049a010 ↗
77. Gunatillake PA, Meijs GF, McCarthy SJ, Adhikari R (2000) Poly(dimethylsiloxane)/poly(hexamethylene oxide) mixed macrodiol based polyurethane elastomers. I. Synthesis and properties. J Appl Polym Sci 76:2026–204010.1002/(SICI)1097-4628(20000628)76:14<2026::AID-APP5>3.0.CO;2-X ↗
78. Wagener KB, Matayabas JC (1992) Quantitative-determination of microphase separation—effect of hard-segment length. Macromolecules 25:5591–559610.1021/ma00047a005 ↗
79. Lin S, Hwang K, Tsay S, Cooper S (1985) Segmental orientation studies of polyether polyurethane block copolymers with different hard segment lengths and distributions. Colloid Polym Sci 263:128–14010.1007/BF01412787 ↗
80. Seymour RW, Allegrezza AE, Cooper SL (1973) Segmental orientation studies of block polymers. I. Hydrogen-bonded polyurethanes. Macromolecules 6:896–90210.1021/ma60036a021 ↗
81. Klinedinst DB, Yilgör I, Yilgör E, Zhang M, Wilkes GL (2012) The effect of varying soft and hard segment length on the structure–property relationships of segmented polyurethanes based on a linear symmetric diisocyanate, 1, 4-butanediol and PTMO soft segments. Polymer 53:5358–536610.1016/j.polymer.2012.08.005 ↗
82. Koberstein JT, Stein RS (1983) Small-angle X-ray scattering studies of microdomain structure in segmented polyurethane elastomers. J Polym Sci Polym Phys 21:1439–147210.1002/pol.1983.180210814 ↗
83. Koberstein JT, Galambos AF, Leung LM (1992) Compression-molded polyurethane block copolymers. 1. Microdomain morphology and thermomechanical properties. Macromolecules 25:6195–620410.1021/ma00049a017 ↗
84. Leung LM, Koberstein JT (1985) Small-angle scattering analysis of hard-microdomain structure and microphase mixing in polyurethane elastomers. J Polym Sci Polym Phys 23:1883–191310.1002/pol.1985.180230912 ↗
85. Vanbogart JWC, Gibson PE, Cooper SL (1983) Structure–property relationships in polycaprolactone–polyurethanes. J Polym Sci Polym Phys 21:65–9510.1002/pol.1983.180210106 ↗
86. Garrett JT, Runt J, Lin JS (2000) Microphase separation of segmented poly(urethane urea) block copolymers. Macromolecules 33:6353–635910.1021/ma000600i ↗
87. Speckhard TA, Hwang KKS, Cooper SL, Chang VSC, Kennedy JP (1985) Properties of polyisobutylene polyurethane block copolymers: 3. Hard segments based on 4,4′-dicyclohexylmethane diisocyanate (H12MDI) and butane diol. Polymer 26:70–7810.1016/0032-3861(85)90058-8 ↗
88. Li YJ, Kang WX, Stoffer JO, Chu B (1994) Effect of hard-segment flexibility on phase-separation of segmented polyurethanes. Macromolecules 27:612–61410.1021/ma00080a043 ↗
89. Corcuera MA, Rueda L, Saralegui A, Martin MD, Fernandez-d’Arlas BA, Mondragon I et al (2011) Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources. J Appl Polym Sci 122:3677–368510.1002/app.34781 ↗
90. He Y, Zhang XY, Zhang XF, Huang H, Chang J, Chen HQ (2013) A recycling model of excess toluene diisocyanate isomers in the preparation of polyurethane prepolymer. J Appl Polym Sci 127:2176–218310.1002/app.37779 ↗
91. Majoros LI, Dekeyser B, Hoogenboom R, Fijten MWM, Geeraert J, Haucourt N et al (2010) Kinetic study of the polymerization of aromatic polyurethane prepolymers by high-throughput experimentation. J Polym Sci A 48:570–58010.1002/pola.23768 ↗
92. Schneider NS, Paiksung CS, Matton RW, Illinger JL (1975) Thermal transition behavior of polyurethanes based on toluene diisocyanate. Macromolecules 8:62–6710.1021/ma60043a014 ↗
93. Sung CSP, Schneider NS (1975) Infrared studies of hydrogen bonding in toluene diisocyanate based polyurethanes. Macromolecules 8:68–7310.1021/ma60043a015 ↗
94. Brunette CM, Hsu SL, Macknight WJ (1982) Hydrogen-bonding properties of hard-segment model compounds in polyurethane block copolymers. Macromolecules 15:71–7710.1021/ma00229a014 ↗
95. Blackwell J, Gardner KH (1979) Structure of the hard segments in polyurethane elastomers. Polymer 20:13–1710.1016/0032-3861(79)90035-1 ↗
96. Born L, Hespe H (1985) On the physical crosslinking of amine-extended polyurethane urea elastomers—a crystallographic analysis of bis-urea from diphenyl methane-4-isocyanate and 1,4-butane diamine. Colloid Polym Sci 263:335–34110.1007/BF01412250 ↗
97. Prisacariu C, Olley RH, Caraculacu AA, Bassett DC, Martin C (2003) The effect of hard segment ordering in copolyurethane elastomers obtained by using simultaneously two types of diisocyanates. Polymer 44:5407–542110.1016/S0032-3861(03)00489-0 ↗
98. Park K, Lim WH, Ko EA, Lee HS (2011) Effect of molecular shape of diisocyanate units on the microscopic/macroscopic phase separation structure of polyurethanes. J Polym Sci Polym Phys 49:890–89710.1002/polb.22264 ↗
99. He Y, Zhang X, Runt J (2014) The role of diisocyanate structure on microphase separation of solution polymerized polyureas. Polymer 55:906–91310.1016/j.polymer.2014.01.001 ↗
100. Blackwell J, Nagarajan MR, Hoitink TB (1982) Structure of polyurethane elastomers-effect of chain extender length on the structure of MDI diol hard segments. Polymer 23:950–95610.1016/0032-3861(82)90392-5 ↗