Carbon nanotube- and graphene-reinforced multiphase polymeric composites: review on their properties and applications
Source abstract
Abstract
In this review, recent progress in the mechanical, thermal and interfacial properties of graphene/CNT multiphase polymer composites is examined. Progress in the mechanical and thermal properties of CNT (1D) and graphene (2D) nanostructure materials is also reviewed and compared. Furthermore, this review highlights the improvements in the mechanical, thermal and interfacial properties of two- and three-phase composites, owing to the addition of graphene/CNT. In particular, analysis of several notable papers on hybrid composites (graphene/CNT) provides an intensive review of synergetic effects on the overall properties of the corresponding composites. This holistic review describes an improved interface between fibers and a nanofiller-reinforced matrix. Although the presence of nanofillers even at low loadings confers an overall improvement in composite properties, the exact ratios of individual fillers and combined forms remain to be discussed in depth. Finally, potential applications, current challenges and future perspectives for use of these multiphase composites are discussed with regard to their extraordinary capabilities and promising developments in graphene/CNT family-based composite materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Fiber-reinforced polymer composites · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Tiwari JN, Tiwari RN, Kim KS (2012) Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices. Prog Mater Sci 57(4):724–80310.1016/j.pmatsci.2011.08.003 ↗
2. Phaahlamohlaka TN, Kumi DO, Dlamini MW, Jewell LL, Coville NJ (2016) Ruthenium nanoparticles encapsulated inside porous hollow carbon spheres: a novel catalyst for Fischer-Tropsch synthesis. Catal Today 275:76–8310.1016/j.cattod.2015.11.034 ↗
3. Budiman F, Bashirom N, Tan WK, Razak KA, Matsuda A, Lockman Z (2016) Rapid nanosheets and nanowires formation by thermal oxidation of iron in water vapour and their applications as Cr(VI) adsorbent. Appl Surf Sci 380:172–17710.1016/j.apsusc.2016.01.209 ↗
4. Wang K, Wang J, Fan J, Lotya M, O’Neill A, Fox D et al (2013) Ultrafast saturable absorption of two-dimensional MoS2 nanosheets. ACS Nano 7(10):9260–926710.1021/nn403886t ↗
5. Yuan K, Che R, Cao Q, Sun Z, Yue Q, Deng Y (2015) Designed fabrication and characterization of three-dimensionally ordered arrays of core–shell magnetic mesoporous carbon microspheres. ACS Appl Mater Interfaces 7(9):5312–531910.1021/am508683p ↗
6. Han DJ, Jung JH, Choi JS, Kim YT, Seo TS (2013) Synthesis of a 3D graphite microball using a microfluidic droplet generator and its polymer composite with core–shell structure. Lab Chip 13(20):4006–401010.1039/c3lc50838b ↗
7. Englert JM, Dotzer C, Yang G, Schmid M, Papp C, Gottfried JM et al (2011) Covalent bulk functionalization of graphene. Nat Chem 3(4):27910.1038/nchem.1010 ↗
8. Schirowski M, Abellán G, Nuin E, Pampel J, Dolle C, Wedler V et al (2018) Fundamental insights into the reductive covalent cross-linking of single-walled carbon nanotubes. J Am Chem Soc 140(9):3352–336010.1021/jacs.7b12910 ↗
9. Bose S, Das A, Basu S, Drzal LT (2017) Covalent functionalization of graphene using polyacryloyl chloride and performance of functionalized graphene–epoxy nanocomposite. Polym Compos 39(9):3119–312810.1002/pc.24318 ↗
10. Uddin ME, Layek RK, Kim HY, Kim NH, Hui D, Lee JH (2016) Preparation and enhanced mechanical properties of non-covalently-functionalized graphene oxide/cellulose acetate nanocomposites. Compos B Eng 90:223–23110.1016/j.compositesb.2015.12.008 ↗
11. Moayeri A, Ajji A (2015) Fabrication of polyaniline/poly (ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning. Synth Met 200:7–1510.1016/j.synthmet.2014.12.020 ↗
12. Bilalis P, Katsigiannopoulos D, Avgeropoulos A, Sakellariou G (2014) Non-covalent functionalization of carbon nanotubes with polymers. RSC Adv 4(6):2911–293410.1039/C3RA44906H ↗
13. Kim H, Oh E, Hahn HT, Lee K-H (2015) Enhancement of fracture toughness of hierarchical carbon fiber composites via improved adhesion between carbon nanotubes and carbon fibers. Compos A Appl Sci Manuf 71:72–8310.1016/j.compositesa.2014.12.014 ↗
14. Saba N, Jawaid M (2018) A review on thermomechanical properties of polymers and fibers reinforced polymer composites. J Ind Eng Chem 67:1–1110.1016/j.jiec.2018.06.018 ↗
15. Mittal G, Rhee KY, Mišković-Stanković V, Hui D (2017) Reinforcements in multi-scale polymer composites: processing, properties, and applications. Compos B Eng 138:122–13910.1016/j.compositesb.2017.11.028 ↗
16. Ranjbartoreh AR, Wang B, Shen X, Wang G (2011) Advanced mechanical properties of graphene paper. J Appl Phys 109(1):01430610.1063/1.3528213 ↗
17. Wang T, Quinn MD, Notley SM (2018) Enhanced electrical, mechanical and thermal properties by exfoliating graphene platelets of larger lateral dimensions. Carbon 129:191–19810.1016/j.carbon.2017.12.034 ↗
18. Yao X, Gao X, Jiang J, Xu C, Deng C, Wang J (2018) Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites. Compos B Eng 132:170–17710.1016/j.compositesb.2017.09.012 ↗
19. Hwang Y, Kim M, Kim J (2013) Improvement of the mechanical properties and thermal conductivity of poly (ether-ether-ketone) with the addition of graphene oxide-carbon nanotube hybrid fillers. Compos A Appl Sci Manuf 55:195–20210.1016/j.compositesa.2013.08.010 ↗
20. Imtiaz S, Siddiq M, Kausar A, Muntha ST, Ambreen J, Bibi I (2018) A review featuring fabrication, properties and applications of carbon nanotubes (CNTs) reinforced polymer and epoxy nanocomposites. Chin J Polym Sci 36(4):445–46110.1007/s10118-018-2045-7 ↗
21. Salom C, Prolongo M, Toribio A, Martínez-Martínez A, de Cárcer IA, Prolongo S (2018) Mechanical properties and adhesive behavior of epoxy-graphene nanocomposites. Int J Adhes Adhes 84:119–12510.1016/j.ijadhadh.2017.12.004 ↗
22. Mittal G, Dhand V, Rhee KY, Park S-J, Lee WR (2015) A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites. J Ind Eng Chem 21:11–2510.1016/j.jiec.2014.03.022 ↗
23. Dresselhaus M, Dresselhaus G, Charlier J-C, Hernandez E (1823) Electronic, thermal and mechanical properties of carbon nanotubes. Philos Trans R Soc Lond A Math Phys Eng Sci 2004(362):2065–2098
24. Isaza MCA, Herrera Ramírez J, Ledezma Sillas J, Meza J (2018) Dispersion and alignment quantification of carbon nanotubes in a polyvinyl alcohol matrix. J Compos Mater 52(12):1617–162610.1177/0021998317731151 ↗
25. Kim S, Lee WI, Park CH (2016) Assessment of carbon nanotube dispersion and mechanical property of epoxy nanocomposites by curing reaction heat measurement. J Reinf Plast Compos 35(1):71–8010.1177/0731684415613704 ↗
26. Li Y, Yang T, Yu T, Zheng L, Liao K (2011) Synergistic effect of hybrid carbon nantube–graphene oxide as a nanofiller in enhancing the mechanical properties of PVA composites. J Mater Chem 21(29):10844–1085110.1039/c1jm11359c ↗
27. Zhang C, Ren L, Wang X, Liu T (2010) Graphene oxide-assisted dispersion of pristine multiwalled carbon nanotubes in aqueous media. J Phys Chem C 114(26):11435–1144010.1021/jp103745g ↗
28. Min C, Liu D, Shen C, Zhang Q, Song H, Li S et al (2018) Unique synergistic effects of graphene oxide and carbon nanotube hybrids on the tribological properties of polyimide nanocomposites. Tribol Int 117:217–22410.1016/j.triboint.2017.09.006 ↗
29. Puglia D, Al-Maadeed MAS, Kenny JM, Thomas S (2017) Elastomer/thermoplastic modified epoxy nanocomposites: the hybrid effect of ‘micro’ and ‘nano’ scale. Mater Sci Eng R Rep 116:1–2910.1016/j.mser.2017.03.001 ↗
30. Li Y, Umer R, Isakovic A, Samad YA, Zheng L, Liao K (2013) Synergistic toughening of epoxy with carbon nanotubes and graphene oxide for improved long-term performance. RSC Adv 3(23):8849–885610.1039/c3ra22300k ↗
31. Nguyen-Tran H-D, Hoang V-T, Do V-T, Chun D-M, Yum Y-J (2018) Effect of multiwalled carbon nanotubes on the mechanical properties of carbon fiber-reinforced polyamide-6/polypropylene composites for lightweight automotive parts. Materials 11(3):42910.3390/ma11030429 ↗
32. Reis V, Opelt C, Cândido G, Rezende M, Donadon M (2018) Effect of fiber orientation on the compressive response of plain weave carbon fiber/epoxy composites submitted to high strain rates. Compos Struct 203:952–95910.1016/j.compstruct.2018.06.016 ↗
33. Li T, Li M, Gu Y, Wang S, Li Q, Zhang Z (2018) Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite. Compos Sci Technol 166:176–18210.1016/j.compscitech.2018.02.007 ↗
34. Yang B, Tang X, Yang K, Xuan FZ, Xiang Y, He L et al (2018) Temperature effect on graphene-filled interface between glass–carbon hybrid fibers and epoxy resin characterized by fiber-bundle pull-out test. J Appl Polym Sci 135(19):4626310.1002/app.46263 ↗
35. Šupová M, Martynková GS, Barabaszová K (2011) Effect of nanofillers dispersion in polymer matrices: a review. Sci Adv Mater 3(1):1–2510.1166/sam.2011.1136 ↗
36. Hong S-K, Kim D, Lee S, Kim B-W, Theilmann P, Park S-H (2015) Enhanced thermal and mechanical properties of carbon nanotube composites through the use of functionalized CNT-reactive polymer linkages and three-roll milling. Compos Part A Appl Sci Manuf 77:142–14610.1016/j.compositesa.2015.05.035 ↗
37. Hameed A, Islam M, Ahmad I, Mahmood N, Saeed S, Javed H (2015) Thermal and mechanical properties of carbon nanotube/epoxy nanocomposites reinforced with pristine and functionalized multiwalled carbon nanotubes. Polym Compos 36(10):1891–189810.1002/pc.23097 ↗
38. Chandra Y, Scarpa F, Adhikari S, Zhang J, Flores ES, Peng H-X (2016) Pullout strength of graphene and carbon nanotube/epoxy composites. Compos B Eng 102:1–810.1016/j.compositesb.2016.06.070 ↗
39. Ji X, Xu Y, Zhang W, Cui L, Liu J (2016) Review of functionalization, structure and properties of graphene/polymer composite fibers. Compos A Appl Sci Manuf 87:29–4510.1016/j.compositesa.2016.04.011 ↗
40. Miculescu M, Thakur VK, Miculescu F, Voicu SI (2016) Graphene-based polymer nanocomposite membranes: a review. Polym Adv Technol 27(7):844–85910.1002/pat.3751 ↗
41. Punetha VD, Rana S, Yoo HJ, Chaurasia A, McLeskey JT Jr, Ramasamy MS et al (2017) Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and graphene. Prog Polym Sci 67:1–4710.1016/j.progpolymsci.2016.12.010 ↗
42. Iijima S, Ichihashi T (1993) Single-shell carbon nanotubes of 1-nm diameter. Nature 363(6430):603–60510.1038/363603a0 ↗
43. Treacy MJ, Ebbesen T, Gibson J (1996) Exceptionally high Young’s modulus observed for individual carbon nanotubes. Nature 381(6584):67810.1038/381678a0 ↗
44. Wong EW, Sheehan PE, Lieber CM (1997) Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science 277(5334):1971–197510.1126/science.277.5334.1971 ↗
45. Yu M-F, Lourie O, Dyer MJ, Moloni K, Kelly TF, Ruoff RS (2000) Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287(5453):637–64010.1126/science.287.5453.637 ↗
46. Lukić B, Seo JW, Bacsa RR, Delpeux S, Béguin F, Bister G et al (2005) Catalytically grown carbon nanotubes of small diameter have a high Young’s modulus. Nano Lett 5(10):2074–207710.1021/nl051034d ↗
47. Troiani H, Miki-Yoshida M, Camacho-Bragado G, Marques M, Rubio A, Ascencio J et al (2003) Direct observation of the mechanical properties of single-walled carbon nanotubes and their junctions at the atomic level. Nano Lett 3(6):751–75510.1021/nl0341640 ↗
48. Motta M, Li Y-L, Kinloch I, Windle A (2005) Mechanical properties of continuously spun fibers of carbon nanotubes. Nano Lett 5(8):1529–153310.1021/nl050634+ ↗
49. Krishnan A, Dujardin E, Ebbesen TW, Yianilos PN, Treacy MMJ (1998) Young’s modulus of single-walled nanotubes. Phys Rev B 58(20):14013–1401910.1103/PhysRevB.58.14013 ↗
50. Yakobson BI, Brabec CJ, Bernholc J (1996) Nanomechanics of carbon tubes: instabilities beyond linear response. Phys Rev Lett 76(14):2511–251410.1103/PhysRevLett.76.2511 ↗
51. Lu J (1997) Elastic properties of carbon nanotubes and nanoropes. Phys Rev Lett 79:1297–130010.1103/PhysRevLett.79.1297 ↗
52. Hernandez E, Goze C, Bernier P, Rubio A (1998) Elastic properties of C and BxCyNz composite nanotubes. Phys Rev Lett 80:4502–450510.1103/PhysRevLett.80.4502 ↗
53. Kelkar AD, Chandekar GS, Mohan R (2008) Prediction of material properties of single walled carbon nanotube using MD simulations. In: Nanotechnology, 2008 NANO ‘08 8th IEEE conference on 2008. https://doi.org/10.1109/nano.2008.11410.1109/nano.2008.114 ↗
54. Zang J-L, Yuan Q, Wang F-C, Zhao Y-P (2009) A comparative study of Young’s modulus of single-walled carbon nanotube by CPMD, MD and first principle simulations. Comput Mater Sci 46(3):621–62510.1016/j.commatsci.2009.04.007 ↗
55. Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354(6348):5610.1038/354056a0 ↗
56. Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321(5887):385–38810.1126/science.1157996 ↗
57. Zandiatashbar A, Lee G-H, An SJ, Lee S, Mathew N, Terrones M et al (2014) Effect of defects on the intrinsic strength and stiffness of graphene. Nat Commun 5:318610.1038/ncomms4186 ↗
58. Grantab R, Shenoy VB, Ruoff RS (2010) Anomalous strength characteristics of tilt grain boundaries in graphene. Science 330(6006):946–94810.1126/science.1196893 ↗
59. Wei Y, Wu J, Yin H, Shi X, Yang R, Dresselhaus M (2012) The nature of strength enhancement and weakening by pentagon–heptagon defects in graphene. Nat Mater 11(9):75910.1038/nmat3370 ↗
60. Wang C, Peng Q, Wu J, He X, Tong L, Luo Q et al (2014) Mechanical characteristics of individual multi-layer graphene-oxide sheets under direct tensile loading. Carbon 80:279–28910.1016/j.carbon.2014.08.066 ↗
61. Rasool HI, Ophus C, Klug WS, Zettl A, Gimzewski JK (2013) Measurement of the intrinsic strength of crystalline and polycrystalline graphene. Nat Commun 4:281110.1038/ncomms3811 ↗
62. Ruiz-Vargas CS, Zhuang HL, Huang PY, Van Der Zande AM, Garg S, McEuen PL et al (2011) Softened elastic response and unzipping in chemical vapor deposition graphene membranes. Nano Lett 11(6):2259–226310.1021/nl200429f ↗
63. Khanafer K, Vafai K (2017) Analysis of the anomalies in graphene thermal properties. Int J Heat Mass Transf 104:328–33610.1016/j.ijheatmasstransfer.2016.07.103 ↗
64. Balandin AA, Ghosh S, Bao W, Calizo I, Teweldebrhan D, Miao F et al (2008) Superior thermal conductivity of single-layer graphene. Nano Lett 8(3):902–90710.1021/nl0731872 ↗
65. Geim AK (2009) Graphene: status and prospects. Science 324(5934):1530–153410.1126/science.1158877 ↗
66. Faugeras C, Faugeras B, Orlita M, Potemski M, Nair RR, Geim A (2010) Thermal conductivity of graphene in corbino membrane geometry. ACS Nano 4(4):1889–189210.1021/nn9016229 ↗
67. Cai W, Moore AL, Zhu Y, Li X, Chen S, Shi L et al (2010) Thermal transport in suspended and supported monolayer graphene grown by chemical vapor deposition. Nano Lett 10(5):1645–165110.1021/nl9041966 ↗
68. Tonelli FM, Goulart VA, Gomes KN, Ladeira MS, Santos AK, Lorençon E et al (2015) Graphene-based nanomaterials: biological and medical applications and toxicity. Nanomedicine 10(15):2423–245010.2217/nnm.15.65 ↗
69. Kumar A, Sharma K, Dixit AR (2019) A review on the mechanical and thermal properties of graphene and graphene-based polymer nanocomposites: understanding of modelling and MD simulation. Mol Simul. https://doi.org/10.1080/08927022.2019.168084410.1080/08927022.2019.1680844 ↗
70. Guo D, Xie G, Luo J (2013) Mechanical properties of nanoparticles: basics and applications. J Phys D Appl Phys 47(1):01300110.1088/0022-3727/47/1/013001 ↗
71. Kumar A, Sharma K, Dixit AR (2019) A review of the mechanical and thermal properties of graphene and its hybrid polymer nanocomposites for structural applications. J Mater Sci 54(8):5992–6026. https://doi.org/10.1007/s10853-018-03244-310.1007/s10853-018-03244-3 ↗
72. Wu Y, Huang M, Wang F, Huang XH, Rosenblatt S, Huang L et al (2008) Determination of the Young’s modulus of structurally defined carbon nanotubes. Nano Lett 8(12):4158–416110.1021/nl801563q ↗
73. Wei X, Chen Q, Peng L-M, Cui R, Li Y (2009) Tensile loading of double-walled and triple-walled carbon nanotubes and their mechanical properties. J Phys Chem C 113(39):17002–1700510.1021/jp902471q ↗
74. Yu M-F, Files BS, Arepalli S, Ruoff RS (2000) Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties. Phys Rev Lett 84(24):5552–555510.1103/PhysRevLett.84.5552 ↗
75. Xu W, Chen Y, Zhan H, Wang JN (2016) High-strength carbon nanotube film from improving alignment and densification. Nano Lett 16(2):946–95210.1021/acs.nanolett.5b03863 ↗
76. Suk JW, Piner RD, An J, Ruoff RS (2010) Mechanical properties of monolayer graphene oxide. ACS Nano 4(11):6557–656410.1021/nn101781v ↗
77. Gómez-Navarro C, Burghard M, Kern K (2008) Elastic properties of chemically derived single graphene sheets. Nano Lett 8(7):2045–204910.1021/nl801384y ↗
78. Sankar PG, Kumar K (2011) Mechanical and electrical properties of single walled carbon nanotubes: a computational study. Eur J Sci Res 60(3):342–358
79. Li J-L, Kudin KN, McAllister MJ, Prudhomme RK, Aksay IA, Car R (2006) Oxygen-driven unzipping of graphitic materials. Phys Rev Lett 96(17):17610110.1103/PhysRevLett.96.176101 ↗
80. Yang L, Greenfeld I, Wagner HD (2016) Toughness of carbon nanotubes conforms to classic fracture mechanics. Sci Adv 2(2):e150096910.1126/sciadv.1500969 ↗
81. Lee C, Wei X, Li Q, Carpick R, Kysar JW, Hone J (2009) Elastic and frictional properties of graphene. Phys Status Solidi B 246(11–12):2562–256710.1002/pssb.200982329 ↗
82. Dürkop T, Getty S, Cobas E, Fuhrer M (2004) Extraordinary mobility in semiconducting carbon nanotubes. Nano Lett 4(1):35–3910.1021/nl034841q ↗
83. Gómez-Navarro C, Weitz RT, Bittner AM, Scolari M, Mews A, Burghard M et al (2007) Electronic transport properties of individual chemically reduced graphene oxide sheets. Nano Lett 7(11):3499–350310.1021/nl072090c ↗
84. Wang S, Ang PK, Wang Z, Tang ALL, Thong JT, Loh KP (2009) High mobility, printable, and solution-processed graphene electronics. Nano Lett 10(1):92–9810.1021/nl9028736 ↗
85. Mahanta NK, Abramson AR (2012) Thermal conductivity of graphene and graphene oxide nanoplatelets. In: 2012 13th IEEE intersociety conference on thermal and thermomechanical phenomena in electronic systems (ITherm). IEEE, pp 1–6
86. Lee J-U, Yoon D, Kim H, Lee SW, Cheong H (2011) Thermal conductivity of suspended pristine graphene measured by Raman spectroscopy. Phys Rev B 83(8):08141910.1103/PhysRevB.83.081419 ↗
87. Bekyarova E, Itkis ME, Cabrera N, Zhao B, Yu A, Gao J et al (2005) Electronic properties of single-walled carbon nanotube networks. J Am Chem Soc 127(16):5990–599510.1021/ja043153l ↗
88. Dikin DA, Stankovich S, Zimney EJ, Piner RD, Dommett GH, Evmenenko G et al (2007) Preparation and characterization of graphene oxide paper. Nature 448(7152):45710.1038/nature06016 ↗
89. Gao W, Alemany LB, Ci L, Ajayan PM (2009) New insights into the structure and reduction of graphite oxide. Nat Chem 1(5):403–40810.1038/nchem.281 ↗
90. Ong YT, Ahmad AL, Zein SHS, Tan SH (2010) A review on carbon nanotubes in an environmental protection and green engineering perspective. Braz J Chem Eng 27(2):227–24210.1590/S0104-66322010000200002 ↗
91. Ismail IM (1987) Structure and active surface area of carbon fibers. Carbon 25(5):653–66210.1016/0008-6223(87)90219-3 ↗
92. Seresht RJ, Jahanshahi M, Rashidi A, Ghoreyshi AA (2013) Synthesize and characterization of graphene nanosheets with high surface area and nano-porous structure. Appl Surf Sci 276:672–68110.1016/j.apsusc.2013.03.152 ↗
93. McAllister MJ, Li J-L, Adamson DH, Schniepp HC, Abdala AA, Liu J et al (2007) Single sheet functionalized graphene by oxidation and thermal expansion of graphite. Chem Mater 19(18):4396–440410.1021/cm0630800 ↗
94. Thostenson ET, Ren Z, Chou T-W (2001) Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol 61:1899–191210.1016/S0266-3538(01)00094-X ↗
95. Gkikas G, Barkoula N-M, Paipetis A (2012) Effect of dispersion conditions on the thermo-mechanical and toughness properties of multi walled carbon nanotubes-reinforced epoxy. Compos B Eng 43(6):2697–270510.1016/j.compositesb.2012.01.070 ↗
96. Jamal-Omidi M, ShayanMehr M (2019) Improving the dispersion of SWNT in epoxy resin through a simple Multi-Stage method. J King Saud Univ Sci 31(2):202–20810.1016/j.jksus.2018.01.007 ↗
97. Ogasawara T, Tsuda T, Takeda N (2011) Stress–strain behavior of multi-walled carbon nanotube/PEEK composites. Compos Sci Technol 71(2):73–7810.1016/j.compscitech.2010.10.001 ↗
98. Yashiro S, Sakaida Y, Shimamura Y, Inoue Y (2016) Evaluation of interfacial shear stress between multi-walled carbon nanotubes and epoxy based on strain distribution measurement using Raman spectroscopy. Compos A Appl Sci Manuf 85:192–19810.1016/j.compositesa.2016.03.019 ↗
99. Zabihi O, Ahmadi M, Naebe M (2015) One-pot synthesis of aminated multi-walled carbon nanotube using thiol-ene click chemistry for improvement of epoxy nanocomposites properties. RSC Adv 5(119):98692–9869910.1039/C5RA20338D ↗
100. Zhou Y, Pervin F, Lewis L, Jeelani S (2008) Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes. Mater Sci Eng A 475(1–2):157–16510.1016/j.msea.2007.04.043 ↗