Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers
Source abstract
Abstract
The disposal of worn tyres and their economic recycling mean a great challenge nowadays. Material recycling is the preferred way supported by legislative actions and economical/ecological arguments. This paper surveys the recent developments devoted to the reclamation, surface treatments, and to the use of ground tyre rubber (GTR) in thermoplastics, thermosetting resins, and rubber formulations. This review discloses also the principle underlying compatibilization to improve the adhesion of GTR to the corresponding matrix. It was concluded that value-added application of GTR can especially be expected in thermoplastic elastomers, and rubber combinations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Bhadra S, De PP, Mondal N, Mukhapadhyaya R, Das Gupta S (2003) J Appl Polym Sci 89(2):465. doi: 10.1002/app.1201910.1002/app.12019 ↗
2. Mangaraj D (2005) Rubber Chem Technol 78(3):53610.5254/1.3547895 ↗
3. Holst O, Stenberg B, Christiansson M (1998) Biodegradation 9(3–4):30110.1023/A:1008337708006 ↗
4. www.rubberstudy.com . Accessed 7 Nov 2011
5. www.etra-eu.org . Accessed 7 Nov 2011
6. Lievana E (2005) Recycling of ground tyre rubber and polyolefin wastes by producing thermoplastic elastomers. PhD Thesis, Technical University of Kaiserslautern, Kaiserslautern, Germany
7. ETRA (2003) Introduction to tyre recycling: 2004. European Tyre Recycling Association, Paris
8. Scheirs J (1998) In: Polymer recycling. Wiley Series in Polymer Science. Wiley, New York, pp 410–416
9. Former C, Osen E (2003) Kautsch Gummi Kunstst 56(3):81
10. Schulman VL (2002) In: DIK Workshop, Hannover, 6–7 June, 2002
11. Manuel HJ (2001) Kautsch Gummi Kunstst 54(3):101
12. Brown KM, Cummings R, Mrozek JR, Terrebonne P (2001) Nat Resour J 41(1):9
13. Liu HS, Mead JL, Stacer RG (2000) Rubber Chem Technol 73(3):55110.5254/1.3547605 ↗
14. Myhre M, MacKillop DA (2002) Rubber Chem Technol 75(3):42910.5254/1.3547678 ↗
15. Adhikari B, De D, Maiti S (2000) Prog Polym Sci 25(7):90910.1016/S0079-6700(00)00020-4 ↗
16. Fang Y, Zhan MS, Wang Y (2001) Mater Des 22(2):12310.1016/S0261-3069(00)00052-2 ↗
17. Makarov VM, Drozdovskiĭ VF (eds) (1991) Reprocessing of tyres and rubber wastes: recycling from the rubber products industry. Ellis Horwood, Chichester
18. De SK, Isayev AI, Khait K (eds) (2005) Rubber recycling. CRC Press, Boca Raton
19. Moldován G (2005) Műanyag és Gumi 42(7):257
20. Herczeg I, Dietrich O (2005) Műanyag és Gumi 42(7):267
21. Burford RP, Pittolo M (1982) Rubber Chem Technol 55(5):1233. doi: 10.5254/1.353592810.5254/1.3535928 ↗
22. Rajalingam P, Sharpe J, Baker WE (1993) Rubber Chem Technol 66(4):66410.5254/1.3538337 ↗
23. Röthemeyer F (1993) Kautsch Gummi Kunstst 46(5):356
24. Spittel A (1996) Chemische modifizierung and Pfropreaktionen an Gummimehl aus Altreifengranulat. Dissertation, University of Hannover
25. CORDIS (1997) Cost efficient recycling of elastomeric materials with noise and vibration damping applications. www.cordis.europa.eu . Accessed 22 May 2012
26. Diao B, Isayev AI, Levin VY (1999) Rubber Chem Technol 72(1):152. doi: 10.5254/1.353878410.5254/1.3538784 ↗
27. Maridass B, Gupta BR (2003) Kautsch Gummi Kunstst 56(5):232
28. Manuel HJ, Dierkes W, Hendriks A (2000) Kautsch Gummi Kunstst 53(12):730
29. Maridass B, Gupta BR (2008) Polym Compos 29(12):1350. doi: 10.1002/pc.2037910.1002/pc.20379 ↗
30. Jana GK, Mahaling RN, Das CK (2006) J Appl Polym Sci 99(5):283110.1002/app.22984 ↗
31. Nicholas PP (1982) Rubber Chem Technol 55(5):149910.5254/1.3535945 ↗
32. Akiba M, Hashim AS (1997) Prog Polym Sci 22(3):47510.1016/S0079-6700(96)00015-9 ↗
33. Cao WD (2007) Constr Build Mater 21(5):1011. doi: 10.1016/j.conbuildmat.2006.02.00410.1016/j.conbuildmat.2006.02.004 ↗
34. Leite LFM, Soares BG (1999) Pet Sci Technol 17(9–10):107110.1080/10916469908949766 ↗
35. Frantzis P (2003) J Mater Sci 38(7):1397. doi: 10.1023/A:102299160811410.1023/A:1022991608114 ↗
36. Navarro FJ, Partal P, Martinez-Boza FJ, Gallegos C (2007) J Appl Polym Sci 104(3):1683. doi: 10.1002/app.2580010.1002/app.25800 ↗
37. De D, Maiti S, Adhikari B (2000) Kautsch Gummi Kunstst 53(6):346
38. Michael H, Scholz H, Mennig G (1999) Kautsch Gummi Kunstst 52(7–8):510
39. Grigoryeva O, Fainleib A, Starostenko O, Danilenko I, Kozak N, Dudarenko G (2004) Rubber Chem Technol 77(1):13110.5254/1.3547806 ↗
40. Ishiaku US, Chong CS, Ismail H (1999) Polym Test 18(8):62110.1016/S0142-9418(98)00060-9 ↗
41. Maridass B, Gupta BR (2004) Polym Test 23(4):377. doi: 10.1016/j.polymertesting.2003.10.00510.1016/j.polymertesting.2003.10.005 ↗
42. Maridass B, Gupta BR (2007) Polimery 52(6):45610.14314/polimery.2007.456 ↗
43. Yehia AA, Ismail MN, Hefny YA, Abdel-Bary EM, Mull MA (2004) J Elastomer Plast 36(2):109. doi: 10.1177/009524430403989610.1177/0095244304039896 ↗
44. Cavalieri F, Padella F, Cataldo F (2003) J Appl Polym Sci 90(6):163110.1002/app.12829 ↗
45. Fukumori K, Matsushita M, Mouri M, Okamoto H, Sato N, Takeuchi K, Suzuki Y (2006) Kautsch Gummi Kunstst 59(7–8):405
46. Thompson LH, Doraiswamy LK (1999) Ind Eng Chem Res 38(4):1215. doi: 10.1021/ie980417210.1021/ie9804172 ↗
47. Warner WC (1994) Rubber Chem Technol 67(3):559. doi: 10.5254/1.353869210.5254/1.3538692 ↗
48. Hong CK, Isayev AI (2002) J Mater Sci 37(2):385. doi: 10.1023/A:101362501812110.1023/A:1013625018121 ↗
49. Yun J, Isayev AI, Kim SH, Tapale M (2003) J Appl Polym Sci 88(2):434. doi: 10.1002/app.1174110.1002/app.11741 ↗
50. Isayev AI, Chen J, Tukachinsky A (1995) Rubber Chem Technol 68(2):26710.5254/1.3538741 ↗
51. Tukachinsky A, Schworm D, Isayev AI (1996) Rubber Chem Technol 69(1):9210.5254/1.3538362 ↗
52. Yun J, Oh JS, Isayev AI (2001) Rubber Chem Technol 74(2):31710.5254/1.3544953 ↗
53. Diao B, Isayev AI, Levin VY, Kim SH (1998) J Appl Polym Sci 69(13):2691. doi: 10.1002/(SICI)1097-4628(19980926)69:13<2691::AID-APP19>3.0.CO;2-X10.1002/(SICI)1097-4628(19980926)69:13<2691::AID-APP19>3.0.CO;2-X ↗
54. Pistor V, Scuracchio CH, Oliveira PJ, Fiorio R, Zatteral AJ (2011) Polym Eng Sci 51(4):697. doi: 10.1002/pen.2187510.1002/pen.21875 ↗
55. Novotny DS, Marsh RI, Masters FC, Tally DN (1978) United States Patent No. 4.104.205
56. Zanchet A, Carli LN, Giovanela M, Brandalise RN, Crespo JS (2012) Mater Des 39:43710.1016/j.matdes.2012.03.014 ↗
57. Schnecko H (1994) Kautsch Gummi Kunstst 47(12):885
58. Jose J, Satapathy S, Nag A, Nando GB (2007) Process Saf Environ Protect 85(B4):31810.1205/psep06045 ↗
59. Kim JK, Park JW (1999) J Appl Polym Sci 72(12):1543. doi: 10.1002/(SICI)1097-4628(19990620)72:12<1543::AID-APP6>3.0.CO;2-310.1002/(SICI)1097-4628(19990620)72:12<1543::AID-APP6>3.0.CO;2-3 ↗
60. Romine RA, Romine MF (1998) Polym Degrad Stab 59(1–3):35310.1016/S0141-3910(97)00202-4 ↗
61. Flory PJ, Rehner J (1943) J Chem Phys 11(11):521. doi: 10.1063/1.172379210.1063/1.1723792 ↗
62. Smith FG, Daniels EJ, Teotia APS (1995) Resour Conserv Recycl 15(2):133. doi: 10.1016/0921-3449(95)00036-i10.1016/0921-3449(95)00036-I ↗
63. Burillo G, Clough RL, Czvikovszky T, Guven O, Le Moel A, Liu WW, Singh A, Yang JT, Zaharescu T (2002) Radiat Phys Chem 64(1):4110.1016/S0969-806X(01)00443-1 ↗
64. Naskar AK, Bhowmick AK, De SK (2002) J Appl Polym Sci 84(3):62210.1002/app.10352 ↗
65. Naskar AK, De SK, Bhowmick AK (2001) Rubber Chem Technol 74(4):64510.5254/1.3544964 ↗
66. Yehia AA, Mull MA, Ismail MN, Hefny YA, Abdel-Bary EM (2004) J Appl Polym Sci 93(1):30. doi: 10.1002/app.2034910.1002/app.20349 ↗
67. Colom X, Carrillo F, Canavate J (2007) Composites A 38(1):44. doi: 10.1016/j.compositesa.2006.01.02210.1016/j.compositesa.2006.01.022 ↗
68. Colom X, Canavate J, Carrillo F, Velasco JI, Pages P, Mujal R, Nogues F (2006) Eur Polym J 42(10):2369. doi: 10.1016/j.eurpolymj.2006.06.00510.1016/j.eurpolymj.2006.06.005 ↗
69. Sadaka F, Campistron I, Laguerre A, Pilard JF (2012) Polym Degrad Stab 97(5):81610.1016/j.polymdegradstab.2012.01.019 ↗
70. Cataldo F, Ursini O, Angelini G (2010) Polym Degrad Stab 95(5):803. doi: 10.1016/j.polymdegradstab.2010.02.00310.1016/j.polymdegradstab.2010.02.003 ↗
71. Naskar AK, De SK, Bhowmick AK (2002) J Appl Polym Sci 84(2):37010.1002/app.10348 ↗
72. Coiai S, Passaglia E, Ciardelli F, Tirelli D, Peruzzotti F, Resmini E (2006) Macromol Symp 234:193. doi: 10.1002/masy.20065022510.1002/masy.200650225 ↗
73. Zhang JL, Chen HX, Ke CM, Zhou Y, Lu HZ, Wang DL (2012) Polym Bull 68(3):789. doi: 10.1007/s00289-011-0586-910.1007/s00289-011-0586-9 ↗
74. Tolstov A, Grigoryeva O, Fainleib A, Danilenko I, Spanoudaki A, Pissis P, Grenet J (2007) Macromol Symp 254(1):226. doi: 10.1002/masy.20075083410.1002/masy.200750834 ↗
75. Fuhrmann I, Karger-Kocsis J (1999) Plast, Rubber Compos 28(10):50010.1179/146580199101540088 ↗
76. Fuhrmann I, Karger-Kocsis J (2003) J Appl Polym Sci 89(6):162210.1002/app.12351 ↗
77. Lee SH, Shanmugharaj AM, Sridhar V, Zhang ZX, Kim JK (2009) Polym Adv Technol 20(7):620. doi: 10.1002/pat.130710.1002/pat.1307 ↗
78. Shanmugharaj AM, Kim JK, Ryu SH (2005) Polym Test 24(6):739. doi: 10.1016/j.polymertesting.2005.04.00610.1016/j.polymertesting.2005.04.006 ↗
79. Shanmugharaj AM, Kim JK, Ryu SH (2006) Appl Surf Sci 252(16):5714. doi: 10.1016/j.apsusc.2005.07.06910.1016/j.apsusc.2005.07.069 ↗
80. Du ML, Guo BC, Jia DM (2005) J Polym Res 12(6):47310.1007/s10965-005-3046-0 ↗
81. Abdel-Bary EM, Dessouki AM, El-Nesr EM, Hassan MM (1997) Polym Plast Technol Eng 36(2):24110.1080/03602559708000617 ↗
82. Hassan MM, Mahmoud GA, El-Nahas HH, Hegazy ESA (2007) J Appl Polym Sci 104(4):2569. doi: 10.1002/app.2529710.1002/app.25297 ↗
83. Yamazaki H, Nagasawa T, Choi W, Endo T (2006) J Appl Polym Sci 101(6):400310.1002/app.22964 ↗
84. Fan P, Lu CH (2011) J Appl Polym Sci 122(4):2262. doi: 10.1002/app.3432910.1002/app.34329 ↗
85. Shahidi N, Teymour F, Arastoopour H (2004) Polymer 45(15):518310.1016/j.polymer.2004.04.061 ↗
86. Shahidi N, Teymour F, Arastoopour H (2004) Macromol Symp 206:47110.1002/masy.200450236 ↗
87. Amash A, Giese U, Schuster RH (2002) Kautsch Gummi Kunstst 55(5):218
88. Deanin RD, Hashemiolya SM (1987) Polym Mater Sci Eng 57:212
89. Fuhrmann I, Karger-Kocsis J (1999) Kautsch Gummi Kunstst 52(12):836
90. Sonnier R, Leroy E, Clerc L, Bergeret A, Lopez-Cuesta JM (2007) Polym Test 26(2):27410.1016/j.polymertesting.2006.10.011 ↗
91. Mészáros L, Tábi T, Kovács JG, Bárány T (2008) Polym Eng Sci 48(5):86810.1002/pen.21022 ↗
92. Mészáros L, Fejős M, Bárány T (2012) J Appl Polym Sci 125(1):512. doi: 10.1002/app.3567510.1002/app.35675 ↗
93. Mészáros L, Bárány T, Czvikovszky T (2012) Radiat Phys Chem. doi: 10.1016/j.radphyschem.2011.11.05810.1016/j.radphyschem.2011.11.058 ↗
94. Zhu J, Zhang XX, Liang M, Lu CH (2011) J Polym Res 18(4):533. doi: 10.1007/s10965-010-9446-910.1007/s10965-010-9446-9 ↗
95. Rajalingam P, Baker WE (1992) Rubber Chem Technol 65(5):90810.5254/1.3538650 ↗
96. Oliphant K, Baker WE (1993) Polym Eng Sci 33(3):16610.1002/pen.760330307 ↗
97. da Costa HM, Ramos VD (2008) Polym Test 27(1):2710.1016/j.polymertesting.2007.08.001 ↗
98. Qin J, Ding H, Wang X, Xie MJ, Yu ZL (2008) Polym Plast Technol Eng 47(2):199. doi: 10.1080/0360255070181621710.1080/03602550701816217 ↗
99. Scaffaro R, Dintcheva NT, Nocilla MA, La Mantia FP (2005) Polym Degrad Stab 90(2):28110.1016/j.polymdegradstab.2005.03.022 ↗
100. Hong CK, Isayev AI (2001) J Elastomer Plast 33(1):4710.1106/5AMQ-XEAY-A05B-P1FY ↗