Additive manufacturing of steels: a review of achievements and challenges
Source abstract
Abstract
Abstract Metal additive manufacturing (AM), also known as 3D printing, is a disruptive manufacturing technology in which complex engineering parts are produced in a layer-by-layer manner, using a high-energy heating source and powder, wire or sheet as feeding material. The current paper aims to review the achievements in AM of steels in its ability to obtain superior properties that cannot be achieved through conventional manufacturing routes, thanks to the unique microstructural evolution in AM. The challenges that AM encounters are also reviewed, and suggestions for overcoming these challenges are provided if applicable. We focus on laser powder bed fusion and directed energy deposition as these two methods are currently the most common AM methods to process steels. The main foci are on austenitic stainless steels and maraging/precipitation-hardened (PH) steels, the two so far most widely used classes of steels in AM, before summarising the state-of-the-art of AM of other classes of steels. Our comprehensive review highlights that a wide range of steels can be processed by AM. The unique microstructural features including hierarchical (sub)grains and fine precipitates induced by AM result in enhancements of strength, wear resistance and corrosion resistance of AM steels when compared to their conventional counterparts. Achieving an acceptable ductility and fatigue performance remains a challenge in AM steels. AM also acts as an intrinsic heat treatment, triggering ‘in situ’ phase transformations including tempering and other precipitation phenomena in different grades of steels such as PH steels and tool steels. A thorough discussion of the performance of AM steels as a function of these unique microstructural features is presented in this review.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Niaki MK, Nonino F (2018) The management of additive manufacturing. Springer, Berlin, pp 973–97810.1007/978-3-319-56309-1 ↗
2. Gibson I, Rosen DW, Stucker B (2014) Additive manufacturing technologies. Springer, Berlin
3. Ciraud L (1973) A method and apparatus for making any belongings from any fusible material. German patent application DE 19722263777A1
4. Meiners W, Wissenbach K, Gasser A (1996) Shaped body especially prototype or replacement part production. DE Patent 19649865
5. Deckard C (1986) Part generation by layer-wise selective laser sintering, MS. Univeristy of Texas-Austin, Austin
6. Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL (2015) Review of selective laser melting: materials and applications. Appl Phys Rev 2(4):04110110.1063/1.4935926 ↗
7. Bhadeshia H, Honeycombe R (2017) Steels: microstructure and properties. Butterworth-Heinemann, Oxford
8. Peng T, Kellens K, Tang R, Chen C, Chen G (2018) Sustainability of additive manufacturing: an overview on its energy demand and environmental impact. Addit Manuf 21:694–704
9. Sreenivasan R, Goel A, Bourell DL (2010) Sustainability issues in laser-based additive manufacturing. Phys Procedia 5:81–9010.1016/j.phpro.2010.08.124 ↗
10. Huang R, Riddle M, Graziano D, Warren J, Das S, Nimbalkar S, Cresko J, Masanet E (2016) Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. J Clean Prod 135:1559–157010.1016/j.jclepro.2015.04.109 ↗
11. Fitzsimons L, McNamara G, Obeidi M, Brabazon D (2020) The circular economy: additive manufacturing and impacts for materials processing. Encyclopedia of Renewable and Sustainable Materials 1:81–9210.1016/B978-0-12-803581-8.11660-1 ↗
12. Bourell DL (2016) Perspectives on additive manufacturing. Annu Rev Mater Res 46:1–1810.1146/annurev-matsci-070115-031606 ↗
13. Plotkowski A, Rios O, Sridharan N, Sims Z, Unocic K, Ott R, Dehoff R, Babu S (2017) Evaluation of an Al-Ce alloy for laser additive manufacturing. Acta Mater 126:507–51910.1016/j.actamat.2016.12.065 ↗
14. Fayazfar H, Salarian M, Rogalsky A, Sarker D, Russo P, Paserin V, Toyserkani E (2018) A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties. Mater Des 144:98–12810.1016/j.matdes.2018.02.018 ↗
15. Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–39210.1016/j.actamat.2016.07.019 ↗
16. Lewandowski JJ, Seifi M (2016) Metal additive manufacturing: a review of mechanical properties. Annu Rev Mater Res 46:151–18610.1146/annurev-matsci-070115-032024 ↗
17. Sander G, Tan J, Balan P, Gharbi O, Feenstra D, Singer L, Thomas S, Kelly R, Scully J, Birbilis N (2018) Corrosion of additively manufactured alloys: a review. Corrosion 74(12):1318–135010.5006/2926 ↗
18. Kong D, Dong C, Ni X, Li X (2019) Corrosion of metallic materials fabricated by selective laser melting. NPJ Mater Degrad 3(1):1–1410.1038/s41529-019-0086-1 ↗
19. Bajaj P, Hariharan A, Kini A, Kürnsteiner P, Raabe D, Jägle EA (2019) Steels in additive manufacturing: a review of their microstructure and properties. Mater Sci Eng A 772:13863310.1016/j.msea.2019.138633 ↗
20. Boegelein T, Dryepondt SN, Pandey A, Dawson K, Tatlock GJ (2015) Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting. Acta Mater 87:201–21510.1016/j.actamat.2014.12.047 ↗
21. Shi Y, Lu Z, Yu L, Xie R, Ren Y, Yang G (2020) Microstructure and tensile properties of Zr-containing ODS-FeCrAl alloy fabricated by laser additive manufacturing. Mater Sci Eng A 774:13893710.1016/j.msea.2020.138937 ↗
22. Shi Y, Lu Z, Xu H, Xie R, Ren Y, Yang G (2019) Microstructure characterization and mechanical properties of laser additive manufactured oxide dispersion strengthened Fe–9Cr alloy. J Alloys Compd 791:121–13310.1016/j.jallcom.2019.03.284 ↗
23. Yan X, Huang C, Chen C, Bolot R, Dembinski L, Huang R, Ma W, Liao H, Liu M (2019) Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting. Surf Coat Technol 371:161–17110.1016/j.surfcoat.2018.03.072 ↗
24. Yan X, Chen C, Zhao R, Ma W, Bolot R, Wang J, Ren Z, Liao H, Liu M (2019) Selective laser melting of WC reinforced maraging steel 300: microstructure characterization and tribological performance. Surf Coat Technol 371:355–36510.1016/j.surfcoat.2018.11.033 ↗
25. Shi R, Khairallah SA, Roehling TT, Heo TW, McKeown JT, Matthews MJ (2020) Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy. Acta Mater 184:284–30510.1016/j.actamat.2019.11.053 ↗
26. Xu W, Lui E, Pateras A, Qian M, Brandt M (2017) In situ tailoring microstructure in additively manufactured Ti–6Al–4V for superior mechanical performance. Acta Mater 125:390–40010.1016/j.actamat.2016.12.027 ↗
27. Sun S-H, Ishimoto T, Hagihara K, Tsutsumi Y, Hanawa T, Nakano T (2019) Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting. Scr Mater 159:89–9310.1016/j.scriptamat.2018.09.017 ↗
28. Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva F, Miranda G (2017) 316L stainless steel mechanical and tribological behavior—a comparison between selective laser melting, hot pressing and conventional casting. Addit Manuf 16:81–89
29. Ma M, Wang Z, Zeng X (2017) A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition. Mater Sci Eng A 685:265–27310.1016/j.msea.2016.12.112 ↗
30. Hooper PA (2018) Melt pool temperature and cooling rates in laser powder bed fusion. Addit Manuf 22:548–559
31. Sun S, Brandt M, Easton M (2017) Powder bed fusion processes: an overview, laser additive manufacturing. Elsevier, Amsterdam, pp 55–77
32. Farshidianfar MH, Khajepour A, Gerlich AP (2016) Effect of real-time cooling rate on microstructure in laser additive manufacturing. J Mater Process Technol 231:468–47810.1016/j.jmatprotec.2016.01.017 ↗
33. Niendorf T, Leuders S, Riemer A, Richard HA, Tröster T, Schwarze D (2013) Highly anisotropic steel processed by selective laser melting. Metall Mater Trans B 44(4):794–79610.1007/s11663-013-9875-z ↗
34. Liu J, To AC (2017) Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting. Addit Manuf 16:58–64
35. Kirka MM, Lee Y, Greeley DA, Okello A, Goin MJ, Pearce MT, Dehoff RR (2017) Strategy for texture management in metals additive manufacturing. JOM 69(3):523–53110.1007/s11837-017-2264-3 ↗
36. Laleh M, Hughes AE, Xu W, Haghdadi N, Wang K, Cizek P, Gibson I, Tan MY (2019) On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting. Corros Sci 161:10818910.1016/j.corsci.2019.108189 ↗
37. Zhang B, Li Y, Bai Q (2017) Defect formation mechanisms in selective laser melting: a review. Chin J Mech Eng 30(3):515–52710.1007/s10033-017-0121-5 ↗
38. Zhao X, Chen J, Lin X, Huang W (2008) Study on microstructure and mechanical properties of laser rapid forming Inconel 718. Mater Sci Eng A 478(1–2):119–12410.1016/j.msea.2007.05.079 ↗
39. Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, Sun T, Rollett AD (2019) Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging. Science 363(6429):849–85210.1126/science.aav4687 ↗
40. Li R, Liu J, Shi Y, Wang L, Jiang W (2012) Balling behavior of stainless steel and nickel powder during selective laser melting process. Int J Adv Manuf Technol 59(9–12):1025–103510.1007/s00170-011-3566-1 ↗
41. Khairallah SA, Anderson A (2014) Mesoscopic simulation model of selective laser melting of stainless steel powder. J Mater Process Technol 214(11):2627–263610.1016/j.jmatprotec.2014.06.001 ↗
42. Khairallah SA, Anderson AT, Rubenchik A, King WE (2016) Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mater 108:36–4510.1016/j.actamat.2016.02.014 ↗
43. Gorsse S, Hutchinson C, Gouné M, Banerjee R (2017) Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti–6Al–4V and high-entropy alloys. Sci Technol Adv Mater 18(1):584–61010.1080/14686996.2017.1361305 ↗
44. Godec M, Zaefferer S, Podgornik B, Šinko M, Tchernychova E (2020) Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting. Mater Charact 160:11007410.1016/j.matchar.2019.110074 ↗
45. Park JH, Kang Y (2017) Inclusions in stainless steels—a review. Steel Res Int 88(12):170013010.1002/srin.201700130 ↗
46. Saeidi K, Kvetková L, Lofaj F, Shen Z (2015) Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions. RSC Adv 5(27):20747–2075010.1039/C4RA16721J ↗
47. Saeidi K, Gao X, Zhong Y, Shen ZJ (2015) Hardened austenite steel with columnar sub-grain structure formed by laser melting. Mater Sci Eng A 625:221–22910.1016/j.msea.2014.12.018 ↗
48. Yan F, Xiong W, Faierson E, Olson GB (2018) Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion. Scr Mater 155:104–10810.1016/j.scriptamat.2018.06.011 ↗
49. Costa e Silva A (2018) Non-metallic inclusions in steels-origin and control. J Mater Res Technol 3:283–29910.1016/j.jmrt.2018.04.003 ↗
50. Wang YM, Voisin T, McKeown JT, Ye J, Calta NP, Li Z, Zeng Z, Zhang Y, Chen W, Roehling TT (2018) Additively manufactured hierarchical stainless steels with high strength and ductility. Nat Mater 17(1):63–7010.1038/nmat5021 ↗
51. Sun Z, Tan X, Tor SB, Chua CK (2018) Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting. NPG Asia Mater 10(4):127–13610.1038/s41427-018-0018-5 ↗
52. Riemer A, Leuders S, Thöne M, Richard H, Tröster T, Niendorf T (2014) On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Eng Fract Mech 120:15–2510.1016/j.engfracmech.2014.03.008 ↗
53. Pegues JW, Roach MD, Shamsaei N (2020) Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure-property relationships. Mater Res Lett 8(1):8–1510.1080/21663831.2019.1678202 ↗
54. Alvi S, Saeidi K, Akhtar F (2020) High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel. Wear 448:20322810.1016/j.wear.2020.203228 ↗
55. Ryan MP, Williams DE, Chater RJ, Hutton BM, McPhail DS (2002) Why stainless steel corrodes. Nature 415(6873):77010.1038/415770a ↗
56. Meng Q, Frankel G, Colijn H, Goss S (2003) Metallurgy (communication arising): stainless-steel corrosion and MnS inclusions. Nature 424(6947):389–39010.1038/424389b ↗
57. Frankel G (1998) Pitting corrosion of metals a review of the critical factors. J Electrochem Soc 145(6):2186–219810.1149/1.1838615 ↗
58. Newman RC (2002) Beyond the kitchen sink. Nature 415(6873):743–74410.1038/415743a ↗
59. Sedriks A (1983) Role of sulphide inclusions in pitting and crevice corrosion of stainless steels. Int Met Rev 28(1):295–30710.1179/imr.1983.28.1.295 ↗
60. Searson P, Latanision R (1986) A comparison of the general and localized corrosion resistance of conventional and rapidly solidified AISI 303 stainless steel. Corrosion 42(3):161–16810.5006/1.3584897 ↗
61. Stewart J, Williams D (1992) The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions. Corros Sci 33(3):457–47410.1016/0010-938X(92)90074-D ↗
62. Sander G, Thomas S, Cruz V, Jurg M, Birbilis N, Gao X, Brameld M, Hutchinson C (2017) On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting. J Electrochem Soc 164(6):C250–C25710.1149/2.0551706jes ↗
63. Laleh M, Hughes AE, Xu W, Gibson I, Tan MY (2019) Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting. Corros Sci 155:67–7410.1016/j.corsci.2019.04.028 ↗
64. Laleh M, Hughes AE, Xu W, Cizek P, Tan MY (2019) Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing. Corros Sci 165:10841210.1016/j.corsci.2019.108412 ↗
65. Chao Q, Cruz V, Thomas S, Birbilis N, Collins P, Taylor A, Hodgson PD, Fabijanic D (2017) On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel. Scr Mater 141:94–9810.1016/j.scriptamat.2017.07.037 ↗
66. Sun Y, Moroz A, Alrbaey K (2014) Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel. J Mater Eng Perform 23(2):518–52610.1007/s11665-013-0784-8 ↗
67. Kazemipour M, Mohammadi M, Mfoumou E, Nasiri A (2019) Microstructure and corrosion characteristics of selective laser-melted 316L stainless steel: the impact of process-induced porosities. JOM 71(9):3230–324010.1007/s11837-019-03647-w ↗
68. Kong D, Dong C, Ni X, Zhang L, Luo H, Li R, Wang L, Man C, Li X (2020) The passivity of selective laser melted 316L stainless steel. Appl Surf Sci 504:14449510.1016/j.apsusc.2019.144495 ↗
69. Hopkinson B, Carroll K (1959) Chromium distribution around grain boundary carbides found in austenitic stainless steel. Nature 184(4697):1479–148010.1038/1841479a0 ↗
70. Ĉíhal V, Kašová I (1970) Relation between carbide precipitation and intercrystalline corrosion of stainless steels. Corros Sci 10(12):875–88110.1016/S0010-938X(70)80106-8 ↗
71. Macatangay D, Thomas S, Birbilis N, Kelly R (2017) Unexpected interface corrosion and sensitization susceptibility in additively manufactured austenitic stainless steel. Corrosion 74(2):153–15710.5006/2723 ↗
72. Man C, Duan Z, Cui Z, Dong C, Kong D, Liu T, Chen S, Wang X (2019) The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting. Mater Lett 243:157–16010.1016/j.matlet.2019.02.047 ↗
73. Kong D, Dong C, Ni X, Zhang L, Luo H, Li R, Wang L, Man C, Li X (2020) Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment. Corros Sci 166:10842510.1016/j.corsci.2019.108425 ↗
74. Baek S-W, Song EJ, Kim JH, Jung M, Baek UB, Nahm SH (2017) Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service. Scr Mater 130:87–9010.1016/j.scriptamat.2016.11.020 ↗
75. Shiomi M, Osakada K, Nakamura K, Yamashita T, Abe F (2004) Residual stress within metallic model made by selective laser melting process. CIRP Ann 53(1):195–19810.1016/S0007-8506(07)60677-5 ↗
76. Mercelis P, Kruth JP (2006) Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J 12(5):254–26510.1108/13552540610707013 ↗
77. De Bruycker E, Montero Sistiaga M, Thielemans F, Vanmeensel K (2017) Corrosion testing of a heat treated 316l functional part produced by selective laser melting. Mater Sci Appl 8:223–233
78. Lou X, Song M, Emigh PW, Othon MA, Andresen PL (2017) On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing. Corros Sci 128:140–15310.1016/j.corsci.2017.09.017 ↗
79. Lou X, Andresen PL, Rebak RB (2018) Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior. J Nucl Mater 499:182–19010.1016/j.jnucmat.2017.11.036 ↗
80. Zaeh MF, Branner G (2010) Investigations on residual stresses and deformations in selective laser melting. Prod Eng Res Devel 4(1):35–4510.1007/s11740-009-0192-y ↗
81. Kruth J-P, Deckers J, Yasa E, Wauthlé R (2012) Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proc Inst Mech Eng Pt B J Eng Manuf 226(6):980–99110.1177/0954405412437085 ↗
82. Kruth J-P, Froyen L, Van Vaerenbergh J, Mercelis P, Rombouts M, Lauwers B (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149(1–3):616–62210.1016/j.jmatprotec.2003.11.051 ↗
83. Wu AS, Brown DW, Kumar M, Gallegos GF, King WE (2014) An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 45(13):6260–627010.1007/s11661-014-2549-x ↗
84. Cheng B, Shrestha S, Chou K (2016) Stress and deformation evaluations of scanning strategy effect in selective laser melting. Addit Manuf 12:240–251
85. Lou X, Othon MA, Rebak RB (2017) Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water. Corros Sci 127:120–13010.1016/j.corsci.2017.08.023 ↗
86. Shamsaei N, Yadollahi A, Bian L, Thompson SM (2015) An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control. Addit Manuf 8:12–35
87. Yadollahi A, Shamsaei N, Thompson SM, Elwany A, Bian L (2017) Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel. Int J Fatigue 94:218–23510.1016/j.ijfatigue.2016.03.014 ↗
88. Mertens A, Reginster S, Contrepois Q, Dormal T, Lemaire O, Lecomte-Beckers J (2014) Microstructures and mechanical properties of stainless steel AISI 316L processed by selective laser melting. Trans Tech Publ, Mater Sci Forum, pp 898–903
89. Kok Y, Tan XP, Wang P, Nai M, Loh NH, Liu E, Tor SB (2018) Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des 139:565–58610.1016/j.matdes.2017.11.021 ↗
90. Andreatta F, Lanzutti A, Vaglio E, Totis G, Sortino M, Fedrizzi L (2019) Corrosion behaviour of 316L stainless steel manufactured by selective laser melting. Mater Corros 70(9):1633–164510.1002/maco.201910792 ↗
91. Li H, Ramezani M, Li M, Ma C, Wang J (2018) Tribological performance of selective laser melted 316L stainless steel. Tribol Int 128:121–12910.1016/j.triboint.2018.07.021 ↗
92. Carlton HD, Haboub A, Gallegos GF, Parkinson DY, MacDowell AA (2016) Damage evolution and failure mechanisms in additively manufactured stainless steel. Mater Sci Eng A 651:406–41410.1016/j.msea.2015.10.073 ↗
93. Zhu Y, Zou J, Chen X, Yang H (2016) Tribology of selective laser melting processed parts: stainless steel 316 L under lubricated conditions. Wear 350:46–5510.1016/j.wear.2016.01.004 ↗
94. Shrestha R, Simsiriwong J, Shamsaei N (2019) Fatigue behavior of additive manufactured 316L stainless steel parts: effects of layer orientation and surface roughness. Addit Manuf 28:23–38
95. Yadollahi A, Shamsaei N (2017) Additive manufacturing of fatigue resistant materials: challenges and opportunities. Int J Fatigue 98:14–3110.1016/j.ijfatigue.2017.01.001 ↗
96. Laleh M, Hughes AE, Yang S, Li J, Xu W, Gibson I, Tan MY (2019) Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting. Corros Sci 165:10839410.1016/j.corsci.2019.108394 ↗
97. Schaller RF, Mishra A, Rodelas JM, Taylor JM, Schindelholz EJ (2018) The role of microstructure and surface finish on the corrosion of selective laser melted 304L. J Electrochem Soc 165(5):C234–C24210.1149/2.0431805jes ↗
98. Melia MA, Nguyen H-DA, Rodelas JM, Schindelholz EJ (2019) Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing. Corros Sci 152:20–3010.1016/j.corsci.2019.02.029 ↗
99. Duan Z, Man C, Dong C, Cui Z, Kong D, Wang X (2020) Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: pitting mechanism induced by gas pores. Corros Sci 167:10852010.1016/j.corsci.2020.108520 ↗
100. Davis JR (1997) ASM specialty handbook: heat-resistant materials. ASM International, Cleveland