COMPUTATIONAL STUDY OF HIGH-PRESSURE LIQUID INJECTION PROCESS BY MEANS OF LES AND PANS APPROACHES
Source abstract
Abstract
For internal combustion engine, the determination of combustion characteristics and subsequent emissions formation relies heavily on the fuel injection process. With the increasing demand for enhanced fuel efficiency and reduced emissions, it becomes vital to develop fundamental understanding of physical process involved in the fuel injection process. In this study, an optimal numerical approach to predict high pressure liquid injection process in the context of industrial computations has been investigated. In particular, this study focuses on the respective performance of the Partially-Averaged Navier-Stokes and Large Eddy Simulation models to predict turbulent igniting sprays. Both approaches are coupled with widely used Lagrangian Discrete Droplet Method for spray modelling. The results are validated against well established ECN Spray A case in reactive and non reactive conditions. For reacting conditions, Flamelet Genrated Manifold (FGM) combustion model is employed in the present work. Comparative study and validation against experimental data showed that PANS turbulence model allows for coarser grids while still maintaining accurate results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Combustion and flame dynamics · Advanced Combustion Engine Technologies · Fluid Dynamics and Heat Transfer
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Alla, G., Badr, O., Soliman, H., and Abd Rabbo, M., Technical Note: Exhaust Emissions from an Indirect Injection Dual-Fuel Engine, Proc. Inst. Mech. Eng. Part D-J. Auto. Eng., vol. 214, pp. 333-340, 2000.10.1243/0954407001527457 ↗
2. Basara, B., Krajnovic, S., Girimaji, S., and Pavlovic, Z., Near-Wall Formulation of the Partially Averaged Navier-Stokes Turbulence Model, AIAA J., vol. 49, pp. 2627-2636, 2011.10.2514/1.J050967 ↗
3. Basara, B., Pavlovic, Z., and Girimaji, S.S., Multidimensional Modeling of Injection and Combustion Phenomena in a Diesel Ignited Gas Engine, SAE Tech. Rep. 2017-01-0559, 2017.
4. Basara, B., Pavlovic, Z., and Girimaji, S., A New Approach for the Calculation of the Cut-Off Resolution Parameter in Bridging Methods for Turbulent Flow Simulation, Int. J. Heat Fluid Flow, vol. 74, pp. 76-88, 2018.10.1016/j.ijheatfluidflow.2018.09.011 ↗
5. ECN, Spray A: Recommended Rate of Injection, accessed from https://ecn.sandia.gov/sprayaroi/, 2022b.
6. ECN, Engine Combustion Network, accessed from https://ecn.sandia.gov/, 2023.
7. Eder, L., Ban, M., Pirker, G., Vujanovic, M., Priesching, P., and Wimmer, A., Development and Validation of 3D-CFD Injection and Combustion Models for Dual Fuel Combustion in Diesel Ignited Large Gas Engines, Energies, vol. 11, p. 643, 2018.10.3390/en11030643 ↗
8. Ferziger, J.H. and Peric, M., Computational Methods for Fluid Dynamics, Berlin: Springer, 2002.10.1007/978-3-642-56026-2 ↗
9. Fink, C., A Multi-Component Evaporation Model for 3D CFD-Code Fire 8: Development and Validation with Experimental Data, PhD, Technical University of Graz, 2005.
10. FIRETM, A., The TABKINTM FGM Model, AVL, 2022a.
11. FIRETM, A., The TABKINTM Table Generation Tool, AVL, 2022b.
12. Gaballa, H., Modeling of Dual-Fuel Jet Break-Up, Phase Change, and Mixing, PhD, Universite Paris-Saclay, 2023.
13. Gerard, D. and Lave, L.B., Implementing Technology-Forcing Policies: The 1970 Clean Air Act Amendments and the Introduction of Advanced Automotive Emissions Controls in the United States, Technol. Forecast. Social Change, vol. 72, no. 7, pp. 761-778, 2005.10.1016/j.techfore.2004.08.003 ↗
14. Girimaji, S. and Abdol-Hamid, K., Partially-Averaged Navier Stokes Model for Turbulence: Implementation and Validation, 43th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 2005.10.2514/6.2005-502 ↗
15. Girimaji, S.S., Partially-Averaged Navier-Stokes Model for Turbulence: A Reynolds-Averaged Navier-Stokes to Direct Numerical Simulation Bridging Method, J. Appl. Mech., vol. 73, no. 3, pp. 413-421, 2005.10.1115/1.2151207 ↗
16. Girimaji, S.S., Srinivasan, R., and Jeong, E., PANS Turbulence Model for Seamless Transition Between RANS and LES: Fixed-Point Analysis and Preliminary Results, Fluids Engineering Division Summer Meeting, Honolulu, HI, pp. 1901-1909, 2003.10.1115/FEDSM2003-45336 ↗
17. Hanjalic, K., Popovac, M., and Hadziabdic, M., A Robust Near-Wall Elliptic-Relaxation Eddy-Viscosity Turbulence Model for CFD, Int. J. Heat Fluid Flow, vol. 25, pp. 1047-1051, 2004.10.1016/j.ijheatfluidflow.2004.07.005 ↗
18. Hooftman, N., Messagie, M., Van Mierlo, J., and Coosemans, T., A Review of the European Passenger Car Regulations - Real Driving Emissions vs. Local Air Quality, Renew. Sustain. Energy Rev., vol. 86, pp. 1-21, 2018.10.1016/j.rser.2018.01.012 ↗
19. Jakirlic, S., Chang, C.Y., and Basara, B., Computation of IC-Engine-Type Flows by a Variable Resolution Model, Multidimensional Engine Modeling (IMEM) User's Group Meeting at the SAE Congress, IMEM, Detroit, MI, 2012.
20. Klein, M., Ketterl, S., and Hasslberger, J., Large Eddy Simulation of Multiphase Flows Using the Volume of Fluid Method: Part 1-Governing Equations and a Priori Analysis, Exp. Comput. Multiphase Flow, vol. 1, pp. 130-144, 2019.10.1007/s42757-019-0019-9 ↗
21. Kobayashi, H., The Subgrid-Scale Models Based on Coherent Structures for Rotating Homogeneous Turbulence and Turbulent Channel Flow, Phys. Fluids, vol. 17, no. 4, p. 045104, 2005.10.1063/1.1874212 ↗
22. Kobayashi, H., Ham, F., and Wu, X., Application of a Local SGS Model Based on Coherent Structures to Complex Geometries, Int. J. Heat Fluid Flow, vol. 29, pp. 640-653, 2008.10.1016/j.ijheatfluidflow.2008.02.008 ↗
23. Krajnovic, S., Larusson, R., and Basara, B., Superiority of PANS Compared to LES in Predicting a Rudimentary Landing Gear Flow with Affordable Meshes, Int. J. Heat Fluid Flow, vol. 37, pp. 109-122, 2012.10.1016/j.ijheatfluidflow.2012.04.013 ↗
24. Lapointe, S., Zhang, K., and McNenly, M., Reduced Chemical Model for Low and High-Temperature Oxidation of Fuel Blends Relevant to Internal Combustion Engines, Proc. Combust. Inst., vol. 37, no. 1, pp. 789-796, 2019.10.1016/j.proci.2018.06.139 ↗
25. Lawrence Livermore National Laboratory, n-Dodecane, accessed from https://combustion.llnl.gov/mechanisms/alkanes/n-dodecane, 2022.
26. Murthi, A., Reyes, D.A., Girimaji, S., and Basara, B., Turbulent Transport Modelling for PANS and Other Bridging Closure Approaches, Proc. of the V European Conf. on Computational Fluid Dynamics ECCOMAS CFD 2010, Lisbon, Portugal, 2010.
27. Perkovic, L., Numerical Modelling of Turbulent Premixed Jet Flames in Large Eddy Simulation Framework, PhD, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2014.
28. Petranovic, Z., Numerical Modelling of Spray and Combustion Processes Using the Euler Eulerian Multiphase Approach, PhD, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2016.
29. Popovac, M. and Hanjalic, K., Compound Wall Treatment for RANS Computation of Complex Turbulent Flows and Heat Transfer, Flow, Turb. Combust., vol. 78, pp. 177-202, 2007.10.1007/s10494-006-9067-x ↗
30. Przulj, V. and Basara, B., Bounded Convection Schemes for Unstructured Grids, 15th AIAA Computational Fluid Dynamics Conf., Anaheim, CA, 2001.10.2514/6.2001-2593 ↗
31. Reitz, R., Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atom. Spray Technol., vol. 3, pp. 309-337, 1987.
32. Reyes, D., Cooper, J., and Girimaji, S., Characterizing Velocity Fluctuations in Partially Resolved Turbulence Simulations, Phys. Fluids, vol. 26, p. 085106, 2014.10.1063/1.4892080 ↗
33. Schlatter, S., Schneider, B., Wright, Y., and Boulouchos, K., Experimental Study of Ignition and Combustion Characteristics of a Diesel Pilot Spray in a Lean Premixed Methane/Air Charge Using a Single Stroke Machine, SAE Tech. Rep. 2012-01-0825, 2012.10.4271/2012-01-0825 ↗
34. Sweby, P.K., High Resolution Schemes Using Flux Limiters for Hyperbolic Conservation Laws, SIAM J. Numer. Anal., vol. 21, no. 5, pp. 995-1011, 1984.10.1137/0721062 ↗
35. Tazraei, P. and Girimaji, S., Scale-Resolving Simulations of Turbulence: Equilibrium Boundary Layer Analysis Leading to Near-Wall Closure Modeling, Phys. Rev. Fluids, vol. 4, p. 104607, 2019.10.1103/PhysRevFluids.4.104607 ↗
36. Tvrdojevic, M., Vujanovic, M., Priesching, P., Tap, F., Starikov, A., Goryntsev, D., and Gavaises, M., Implementation of the Semi Empirical Kinetic Soot Model within Chemistry Tabulation Framework for Efficient Emissions Predictions in Diesel Engines, Open Phys., vol. 17, pp. 905-915, 2019.10.1515/phys-2019-0096 ↗
37. van Oijen, J., Donini, A., Bastiaans, R., ten Thije Boonkkamp, J., and de Goey, L., State-of-the-Art in Premixed Combustion Modeling Using Flamelet Generated Manifolds, Prog. Energy Combust. Sci., vol. 57, pp. 30-74, 2016.10.1016/j.pecs.2016.07.001 ↗
38. Xu, C., Zhuang, Y., Qian, Y., and Cho, H., Effect on the Performance and Emissions of Methanol/Diesel Dual-Fuel Engine with Different Methanol Injection Positions, Fuel, vol. 307, p. 121868, 2022.10.1016/j.fuel.2021.121868 ↗
39. Xu, S., Zhong, S., Pang, K.M., Yu, S., Jangi, M., and Bai, X.S., Effects of Ambient Methanol on Pollutants Formation in Dual-Fuel Spray Combustion at Varying Ambient Temperatures: A Large-Eddy Simulation, Appl. Energy, vol. 279, p. 115774, 2020.10.1016/j.apenergy.2020.115774 ↗
40. Xue, Q., Battistoni, M., Powell, C., Longman, D., Quan, S., Pomraning, E., Senecal, P., Schmidt, D., and Som, S., An Eulerian CFD Model and X-Ray Radiography for Coupled Nozzle Flow and Spray in Internal Combustion Engines, Int. J. Multiphase Flow, vol. 70, pp. 77-88, 2015.10.1016/j.ijmultiphaseflow.2014.11.012 ↗
41. Zilic, A., Large-Eddy Simulation of Fuel Injection at Subcritical and Supercritical Conditions, PhD, Technischen Fakultat der Friedrich-Alexander-Universitat Erlangen-Nurnberg, 2021.