Effect of H on room temperature creep response in as−built and machined electron beam powder bed fusion Ti−6Al−4V
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Pulsed Power Technology Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Lûtjering · 2007
2. Structure and properties of titanium and titanium alloys
3. The effects of low fugacity hydrogen in duplex− and beta−annealed Ti–6Al–4V alloy10.1016/j.msea.2004.04.020 ↗
4. Hydrogen−induced subcritical crack growth in Ti–6Al–4V alloy10.1016/S0921-5093(97)00506-6 ↗
5. Effects of hydrogen in titanium alloys on subcritical crack growth under sustained load10.1016/0025-5416(76)90094-X ↗
6. Application of the incremental step loading technique to small punch tests in hydrogen embrittlement
7. On the suitability of slow strain rate tensile testing for assessing hydrogen embrittlement susceptibility
8. Time optimization of the step loading technique in hydrogen embrittlement small punch tests10.1016/j.tafmec.2021.103206 ↗
9. Comparison between slow strain rate test and constant load test on notched specimens for HSLA steels HE susceptibility evaluation10.1016/j.engfailanal.2024.108321 ↗
10. Hydrogen transport through thin titanium oxides10.1016/j.jelechem.2010.06.022 ↗
11. Abdul−Hamid · 1993
12. Determination of the diffusion coefficient of hydrogen in gamma titanium aluminides during electrolytic charging10.1016/S1359-6454(99)00431-0 ↗
13. Thermodynamics approach to the hydrogen diffusion and phase transformation in titanium particles10.1016/j.jallcom.2010.11.073 ↗
14. Characterization and modeling of room−temperature high compressive stress creep in near−α titanium alloy joints
15. Room temperature creep mechanisms of Ti–6Al–4V ELI alloy with equiaxed microstructure under different applied stresses10.1016/j.jmrt.2023.10.001 ↗
16. Slip activity during low−stress cold creep deformation in a near−α titanium alloy10.1016/j.actamat.2022.117691 ↗
17. Cold creep of titanium: analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations10.1016/j.actamat.2020.08.010 ↗
18. Presences of primary creep in various phase metals and alloys at ambient temperature10.1016/j.msea.2004.01.146 ↗
19. Phenomenological and microstructural analysis of room temperature creep in titanium alloys10.1016/S1359-6454(99)00426-7 ↗
20. Ankem · 2007
21. Low temperature creep of Ti−6 Al−4 V10.1007/BF02644335 ↗
22. Hydrogen embrittlement in Ti–6Al–4V: a comparative review of conventional and additive manufacturing10.1016/j.ijhydene.2025.151710 ↗
23. Effect of hydrogen on creep behavior of Ti−6AI−4V alloy at room temperature10.1007/BF02668562 ↗
24. Deformation and damage mechanisms in an α/β 6242 Ti alloy in fatigue, dwell−fatigue and creep at room temperature. Influence of internal hydrogen10.1016/j.msea.2008.11.045 ↗
25. Hydriding of titanium: recent trends and perspectives in advanced characterization and multiscale modeling10.1016/j.cossms.2022.101020 ↗
26. Hydrogen embrittlement10.1016/B978-0-12-341825-8.50014-3 ↗
27. Christ · 2007
28. Formation of titanium hydride in Ti–6Al–4V alloy10.1016/j.jallcom.2006.01.014 ↗
29. Hydrogen diffusion−induced crystallographic changes in α + β titanium alloy10.1016/j.scriptamat.2024.116410 ↗
30. Heat treatment effects on the hydrogen embrittlement of Ti6Al4V fabricated by laser beam powder bed fusion
31. In−situ hydrogen embrittlement evaluation of as−built and heat treated laser powder bed fused Ti−6Al−4V versus conventionally cold rolled Ti−6Al−4V
32. Hydrogen embrittlement in hydride and non hydride−forming systems − microstructural/phase changes and cracking mechanisms
33. Microvoids in electrochemically hydrogenated titanium−based alloys10.1016/j.ijhydene.2021.05.187 ↗
34. Recent research progress in hydrogen embrittlement of additively manufactured metals – a review10.1016/j.cossms.2023.101106 ↗
35. Characterization of microstructure and strain response in Ti–6Al–4V plasma welding deposited material by combined EBSD and in−situ tensile test10.1016/S1003-6326(14)63553-6 ↗
36. Effect of build thickness and geometry on quasi−static and fatigue behavior of Ti−6Al−4V produced by electron beam melting
37. Directed energy deposition versus wrought Ti‐6Al‐4V: a comparison of microstructure, fatigue behavior, and notch sensitivity10.1002/adem.201900220 ↗
38. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
39. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
40. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting10.1016/j.jmatprotec.2015.01.025 ↗
41. Microstructural porosity in additive manufacturing: the formation and detection of pores in metal parts fabricated by powder bed fusion10.1002/amp2.10021 ↗
42. Additive manufacturing: effects of defects
43. Defect analysis for additively manufactured materials in fatigue from the viewpoint of quality control and statistics of extremes10.1016/j.prostr.2019.12.014 ↗
44. The mechanism behind the effect of building orientation and surface roughness on hydrogen embrittlement of laser powder bed fused Ti−6Al−4V
45. Roughening improves hydrogen embrittlement resistance of Ti−6Al−4V10.1016/j.actamat.2021.117304 ↗
46. The role of surface roughness on hydrogen embrittlement of electron beam powder bed fusion Ti−6Al−4V10.1016/j.msea.2026.150229 ↗
47. The influence of porosity on fatigue crack initiation in additively manufactured titanium components10.1038/s41598-017-06504-5 ↗
48. Establishing the intrinsic connection between microstructure, 3D defects, and the corrosion behavior of selective laser melted WE43 alloys10.1007/s12598-025-03463-z ↗
49. A review of the data on the interlamellar spacing of pearlite10.1007/BF02644694 ↗
50. Effects of defects, surface roughness and HIP on fatigue strength of Ti−6Al−4V manufactured by additive manufacturing10.1016/j.prostr.2017.11.055 ↗
51. Influence of defects, surface roughness and HIP on the fatigue strength of Ti−6Al−4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
52. Decoupling the elemental contributions of Al to the creep behavior of high−temperature titanium alloys10.1016/j.msea.2026.149919 ↗
53. The mechanism of hydride formation during electrochemical hydrogen charging of Ti–6Al–4V
54. Effect of strain rate on hydrogen embrittlement of Ti6Al4V alloy10.3390/ma17051100 ↗
55. Creep and high temperature fatigue performance of as build selective laser melted ti−based 6Al−4V titanium alloy10.1016/j.engfailanal.2020.104477 ↗
56. Uncovering the hydride orientation−mediated hoop fatigue mechanism in a zirconium alloy cladding tube10.1016/j.ijplas.2022.103440 ↗
57. Hydrogenation−induced lattice expansion and its effects on hydrogen diffusion and damage in Ti–6Al–4V10.1016/j.actamat.2020.02.029 ↗
58. Hydrogen embrittlement of α titanium: in situ tem studies10.1016/0001-6160(88)90032-6 ↗
59. Effect of texture on the room temperature tensile and creep properties of Ti–6Al–4V plate with large thickness10.1016/j.jmrt.2024.03.212 ↗
60. Experimental study of dislocation mobility in a Ti–6Al–4V alloy10.1016/j.actamat.2007.07.032 ↗
61. Probing the effect of solute hydrogen and hydrides on the prismatic slip of [ 2 1 ‾ 1 ‾ 0 ] −orientated alpha titanium using in−situ micropillar compression10.1016/j.scriptamat.2025.116859 ↗
62. Hydrogen−enhanced localized Plasticity—a mechanism for hydrogen−related fracture10.1016/0921-5093(94)90975-X ↗
63. Ankem · 2006
64. A critical review on additive manufacturing of Ti−6Al−4V alloy: microstructure and mechanical properties10.1016/j.jmrt.2022.04.055 ↗