journal article·2026-07Open access

Role of Ti2Ni precipitates in dynamic recrystallization of near-equiatomic NiTi alloy during hot deformation

Tianxu Zheng, Huiqin Wang, Jinhua Dai, Tianfei Zhao, Quan Fu, Yi Liu, Wei Song, Jian Wang, Zhiwei Xia, Zixiang Wu, Yong Chen, Xin Fang, Bin Tang

Abstract

This study investigates the dual role of brittle Ti 2 Ni precipitates in the dynamic softening of near-equiatomic NiTi alloys by examining their influence on dynamic recrystallization and microstructural evolution during hot deformation. Isothermal hot compression tests were conducted at 700-1000 °C under a strain rate of 0.1 s -1 , and the microstructural evolution was characterized by SEM, EBSD, and TEM. The brittle Ti 2 Ni phase influences microstructural evolution through two distinct mechanisms, namely particle-stimulated nucleation and Zener pinning, depending on the deformation conditions. When the deformation parameters did not alter the size and distribution of the Ti 2 Ni precipitates, coarse Ti 2 Ni particles induced local stress concentrations, serving as preferential nucleation sites for discontinuous dynamic recrystallization within the B2 austenite matrix. Conversely, when the deformation parameters promoted mechanical fragmentation and redistribution of Ti 2 Ni precipitates, these finely dispersed particles along the flow lines pinned the migration of high-angle grain boundaries, thereby suppressing grain coarsening of recrystallized B2 grains at elevated temperatures and contributing to microstructural refinement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Shape Memory Alloy Transformations · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. In situ neutron diffraction investigation of texture-dependent shape memory effect in a near equiatomic NiTi alloy10.1016/j.actamat.2020.10.049 ↗
2. Enhancing shape memory properties of 3D-printed NiTi alloys by laser powder bed fusion through microstructural control10.1016/j.jallcom.2024.178029 ↗
3. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
4. Advancing engineering frontiers with NiTi shape memory alloys: a multifaceted review of properties, fabrication, and application potentials10.1016/j.jallcom.2023.173227 ↗
5. Hot deformation and dynamic recrystallization of NiTi intermetallic compound10.1016/j.jallcom.2014.06.063 ↗
6. Microstructural heterogeneity and texture of as-received, vacuum arc-cast, extruded, and re-extruded NiTi shape memory alloy10.1016/j.jallcom.2017.04.152 ↗
7. The evolution of dynamic recrystallization and recrystallization texture during isothermal compression of NiTi shape memory alloy10.1016/j.msea.2021.141424 ↗
8. Dynamic recovery and dynamic recrystallization of NiTi shape memory alloy under hot compression deformation10.1016/S1003-6326(13)62440-1 ↗
9. Research on energy dissipation and dynamic recrystallization microstructure evolution behavior of NiTi alloy during hot deformation10.1016/j.matchar.2024.113673 ↗
10. Hot compression deformation behavior of biomedical Ni-Ti alloy10.1007/s12598-019-01291-6 ↗
11. The development of TiNi-based negative Poisson's ratio structure using selective laser melting10.1016/j.actamat.2015.12.017 ↗
12. Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti2Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting10.1016/j.jmst.2021.06.019 ↗
13. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
14. Behavior and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot10.1016/j.jallcom.2013.07.046 ↗
15. Hot compressive deformation and microstructural evolution of 60NiTi alloy10.1016/S1003-6326(22)66099-0 ↗
16. A study on the hot workability of wrought NiTi shape memory alloy10.1016/j.msea.2011.04.036 ↗
17. Constitutive equation and processing map of equiatomic NiTi shape memory alloy under hot plastic deformation10.1016/S1003-6326(16)64283-8 ↗
18. High temperature deformation and processing map of a NiTi intermetallic alloy10.1016/j.intermet.2011.05.005 ↗
19. Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA202410.1016/j.matchar.2017.03.025 ↗
20. Analysis of particle-stimulated nucleation (PSN)-dominated recrystallization for hot-rolled 7050 aluminum alloy10.1007/s11661-017-3967-3 ↗
21. Role of particle stimulated nucleation in recrystallization of hot extruded Al 6061/SiCp composites10.1016/S1003-6326(13)62428-0 ↗
22. Study of the microstructure evolution of heat treated Ti-rich NiTi shape memory alloy10.1016/j.matchar.2015.11.017 ↗
23. Particle pinning effect on grain boundary and double peak-aging characteristic in a hot-extruded Mg-Zn-based alloy10.1016/j.ijplas.2025.104324 ↗