Microstructural evolution and toughening mechanisms of DIFT in 15Cr–5Ni steel with banded ferrite-martensite heterogeneous structure
Source abstract
Abstract
ABSTRACT A key challenge in the design of high-performance martensitic stainless steels is enhancing toughness without significant loss in strength. In this study, we address this by leveraging a banded ferrite-martensite heterostructure in a 15Cr-5Ni steel. Such a structure is achieved via an industrial hot extrusion and normalization process during which deformation-induced ferrite transformation is facilitated. The as-extruded sample exhibits tensile strength comparable to that of the as-forged sample, yet its impact toughness is improved by an order of magnitude (from 10.5 J to 101.4 J). Detailed microstructural analyses reveal that hot extrusion promotes the accumulation of high-density geometrically necessary dislocations (GNDs), so that HDI stress concentrates significantly at the ferrite-martensite interfaces. This subsequently leads to strengthening of ferrite, promotion of interfacial cracking, and alleviation of stress concentration in martensite. As a consequence, crack tip is blunted and crack propagation is deflected in the as-extruded material, giving rise to exceptional impact toughness. This study provides a new microstructure design approach for developing high-toughness martensitic stainless steels.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructure, mechanical properties and strengthening mechanism of high strength hot-rolled ferrite-martensite dual phase steel10.1016/j.matchar.2023.113545 ↗
2. Effect of post-annealing temperature on the microstructure, texture, and mechanical properties of a deformed ferrite-martensite stainless steel10.1016/j.jmrt.2025.09.285 ↗
3. Austenite formation in plain low-carbon steels10.1007/s11661-010-0551-5 ↗
4. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
5. Effect of grain refinement to 1μm on strength and toughness of dual-phase steels10.1016/j.msea.2010.08.062 ↗
6. Phase transformation in Duplex stainless steels after Isothermal treatments, continuous cooling and cold working10.4028/www.scientific.net/MSF.638-642.2986 ↗
7. Effects of TRIP and TWIP mechanisms on improved charpy impact energy of thick hot-rolled duplex lightweight steel plates10.1016/j.jmrt.2024.11.103 ↗
8. Study of the microstructure, mechanical properties and forming behaviour of graphene-interlayered resistance spot-welded patch blanks of dissimilar ultra-low carbon cold-rolled and dual-phase steel sheets
9. Effect of alloying elements and hot-rolling conditions on microstructure of bainitic-ferrite/martensite dual phase steel with high toughness10.1016/j.msea.2015.09.093 ↗
10. A hot deformation constitutive model applicable for complete austenite and dynamic ferrite transformation interval10.1016/j.msea.2024.147419 ↗
11. A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure10.1016/j.actamat.2016.12.045 ↗
12. Development of a high strength and ductile Nb-bearing dual phase steel by cold-rolling and intercritical annealing of the ferrite-martensite microstructures10.1016/j.msea.2016.02.028 ↗
13. Towards understanding the structure–property relationships of heterogeneous-structured materials10.1016/j.scriptamat.2020.05.013 ↗
14. Effect of cold rolling reduction ratio on microstructure and mechanical properties of Fe–10Mn–4Al-0.4C steel containing δ ferrite10.1016/j.msea.2023.144715 ↗
15. Microstructures, mechanical properties and deformation mechanism of heterogeneous metal materials: a review10.1016/j.jmst.2025.03.109 ↗
16. Dynamic hetero-deformation induced hardening through strength reversal between hetero-zones in austenite-ferrite duplex steel10.1016/j.actamat.2025.121120 ↗
17. Surface layer characteristics of SAF2507 duplex stainless steel treated by stress shot peening10.1016/j.apsusc.2019.03.045 ↗
18. Medium/high entropy alloys with heterogeneous structures for superior properties: a review10.1016/j.mtadv.2024.100553 ↗
19. Synergistic optimization of microstructure and mechanical properties of AISI 430 ferritic stainless steel via dual-phase zone annealing process10.1016/j.matchar.2024.114283 ↗
20. Effect of hot rolling process on the microstructure and mechanical properties of a high-strength strip casting microalloyed steel10.1016/j.msea.2024.147130 ↗
21. Strong yet ductile low-density steel via multiphase heterogeneous microstructure
22. Static recrystallization behavior and mechanical properties of heterogeneous nanostructured duplex phase stainless steel10.2320/matertrans.MT-M2019302 ↗
23. Achieving high strength and high ductility of dual-phase steel via alternating lamellar microstructure10.1016/j.msea.2024.146072 ↗
24. Dramatic improvement in strength–ductility balance of dual-phase steels by optimizing features of ferrite phase10.1016/j.jmrt.2025.01.031 ↗
25. Assessing strength of ferrite and martensite in five dual phase and two martensitic steels via high throughput nanoindentation to elucidate origins of strength10.1016/j.jmrt.2024.10.054 ↗
26. Achieving superior strength-ductility synergy of 2205 duplex stainless steel via dual-heterogeneous structure design10.1016/j.jmst.2024.04.071 ↗
27. Extraordinary strain hardening by gradient structure10.1073/pnas.1324069111 ↗
28. Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation10.1016/j.msea.2015.10.120 ↗
29. Enhancing stretch-flangeability in high-strength hot-rolled automotive steel: the role of interface affected zone in optimized microstructure10.1016/j.msea.2025.149144 ↗
30. Enhancing impact toughness of Q-P-T plain steels via multiscale design: resolving the strength-toughness balance10.1016/j.scriptamat.2025.116890 ↗
31. Enhancing strength and plasticity of automotive steel via tailored refined dual-phase microstructure through a short and energy-efficient process10.1016/j.msea.2025.148056 ↗
32. High fracture toughness of an ultra-strong medium Mn steel with fibrous ferrite in a martensitic matrix10.1016/j.msea.2024.146606 ↗
33. Nanoindentation characterization of strengthening mechanism in a high strength ferrite/martensite steel10.1016/j.msea.2018.12.065 ↗