Accelerated austempering kinetics in a low-cost alloy: Simulation, processing, and microstructural analysis
Source abstract
Abstract
The industrial adoption of ultrafine bainitic steels is limited by excessively long heat treatment times. This study presents a new, low-cost alloy designed to overcome this limitation by achieving accelerated austempering kinetics. First, a composition of Fe-0.6C-1.5Si-1.0Mn-0.25Cr-0.02Nb (wt%) was designed using thermodynamic simulation, and then manufactured and heat-treated. The resulting microstructures were characterized in detail using optical and scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, X-ray diffraction with Rietveld refinement, Vickers hardness testing and tensile testing. After ∼2 h of austempering at 320 °C, the hardness increased by ∼90% compared to the non-austempered condition. The alloy achieved competitive hardness of 557 ± 10 HV and ultimate tensile strength (UTS) of 1.57 ± 0.20 GPa, which are comparable to those of conventional ultrafine bainitic steels requiring much longer processing times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Bhadeshia · 2001
2. Alternatives to the ferrite-pearlite microstructures10.4028/www.scientific.net/MSF.284-286.39 ↗
3. A personal commentary on “transformation of austenite at constant subcritical temperatures.”10.1007/s11661-010-0250-2 ↗
4. The first bulk nanostructured metal10.1088/1468-6996/14/1/014202 ↗
5. Accelerating nano-bainite transformation based on a new constructed microstructural predicting model10.1016/j.msea.2019.01.061 ↗
6. Nanostructured steel industrialisation: plausible reality10.1179/1743284713Y.0000000428 ↗
7. Critical driving forces for formation of bainite10.1007/s11661-018-4819-5 ↗
8. Nanostructured bainite10.1098/rspa.2009.0407 ↗
9. Acceleration of low-temperature bainite10.2355/isijinternational.43.1821 ↗
10. Design of novel bainitic steels: moving from ultrafine to nanoscale structures10.1007/s11837-014-0908-0 ↗
11. The effects of Cr and Al addition on transformation and properties in low-carbon bainitic steels10.3390/met7020040 ↗
12. High-strength low-cost nano-bainitic steel10.1007/s11665-020-04771-4 ↗
13. Development of a low-carbon carbide-free nanostructured bainitic steel with extremely high strength and toughness10.1016/j.msea.2023.145186 ↗
14. Role of nano-bainite laths and nanosized precipitates: strengthening a low-alloy steel to 1870 MPa10.1016/j.jmrt.2024.09.230 ↗
15. Effect of Si on bainitic transformation kinetics in steels explained by carbon partitioning, carbide formation, dislocation densities, and thermodynamic conditions10.1016/j.matchar.2022.111774 ↗
16. Formation of lower bainite in a high carbon steel - an in-situ synchrotron XRD study10.1016/j.jmrt.2022.05.025 ↗
17. Bainite percentage determination and effect of bainite percentage on mechanical properties in austempered AISI 5160 steel10.1520/MPC20200068 ↗
18. Thermal stability of microstructure and corresponding hardness variations in two high-carbon nanostructured bainitic steels
19. Effect of metastable retained austenite on dynamic mechanical properties of nanostructured bainitic steel under high-strain rate deformation10.1016/j.jmrt.2024.01.280 ↗
20. Industrialised nanocrystalline bainitic steels. Design approach10.3139/146.111090 ↗
21. Effect of austempering time on bainite plate thickness and variant selection in a high carbon low alloy steel10.1016/j.matchar.2023.112923 ↗
22. Developing very hard nanostructured bainitic steel10.1016/j.msea.2012.08.020 ↗
23. Acceleration of bainitic transformation in nanostructured, low temperature bainitic steels by using of thermodynamic model10.4028/www.scientific.net/SSP.172-174.214 ↗
24. Mechanism of formation and characteristics of microstructure of novel nanobainitic steel10.1007/s11041-024-01037-x ↗
25. Understanding mechanical properties of nano-grained bainitic steels from multiscale structural analysis10.3390/met9040426 ↗
26. Peet M, Bhadeshia HKDH. Materials Algorithms Project Program Library n.d.
27. Ooi SW. Materials Algorithms Project Program Library n.d.
28. The role of carbon on the kinetics of bainite transformation in steels10.1016/S1359-6462(02)00121-5 ↗
29. Effect of carbon content on bainite transformation kinetics and microstructure of 4140/4150 steels10.19044/esj.2019.v15n9p518 ↗
30. Microstructures and reaction kinetics of bainite transformation in Si-rich steels10.1016/j.msea.2003.10.297 ↗
31. Toughness variations in nanostructured bainitic steels10.1016/j.msea.2012.03.098 ↗
32. Effects of Mn and Cr contents on microstructures and mechanical properties of low temperature bainitic steel10.1016/S1006-706X(17)30042-0 ↗
33. Influence of niobium microalloying on the microstructure and mechanical properties of high carbon nano bainitic steel10.1016/j.prostr.2019.05.091 ↗
34. Using JMatPro to model materials properties and behavior10.1007/s11837-003-0013-2 ↗
35. Young · 1993
36. A comprehensive solution to miniaturized tensile testing: specimen geometry optimization and extraction of constitutive behaviors using inverse FEM procedure10.1016/j.fusengdes.2017.07.016 ↗
37. 2024
38. Rietveld refinement guidelines. International Union of Crystallography10.1107/S0021889898009856 ↗
39. Effect of austempering time on microstructure and properties of a low-carbon bainite steel10.1007/s12613-019-1881-y ↗
40. Kinetics of the bainite transformation10.1098/rspa.2003.1225 ↗
41. London metal exchange – official website n.d. https://www.lme.com.