Direct decomposition of bainitic steel transformed below martensite start temperature: In situ S/TEM study
Source abstract
Abstract
In-situ S/TEM was used to investigate tempering and reverse transformation in a nanocrystalline bainitic steel isothermally treated below the martensite start (M s ) temperature. Real-time observations reveal subtle differences in the thermal stability of bainitic ferrite and pre-martensite. Comparative decomposition pathways of bainitic ferrite and pre-martensite indicate the higher thermal stability of bainitic ferrite, while microstructural differences disappear above 600 °C. Austenite reversion initiates preferentially in regions containing blocky retained austenite and bainitic ferrite/pre-martensite interphase (type-A). Also, type-B austenite was revealed during reverse transformation in the region of adjacent dissolving carbides (see movie). These findings provide insight into the direct decomposition mechanism and reverse transformation in low-temperature bainitic steels, which lie beyond the capabilities of conventional techniques.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Nanostructured bainite
2. Design of novel high strength bainitic steels: part 110.1179/026708301101510348 ↗
3. Design of novel high strength bainitic steels: part 210.1179/026708301101510357 ↗
4. Very strong bainite10.1016/j.cossms.2004.09.005 ↗
5. Very strong low temperature bainite10.1179/026708301225000725 ↗
6. Development of hard bainite10.2355/isijinternational.43.1238 ↗
7. Design of novel bainitic steels: moving from ultrafine to nanoscale structures10.1007/s11837-014-0908-0 ↗
8. Nanostructured steel industrialisation: plausible reality10.1179/1743284713Y.0000000428 ↗
9. Viewpoints on technological aspects of advanced high-strength bainitic steels10.3390/met12020195 ↗
10. Welding capabilities of nanostructured carbide-free bainite: review of welding methods, materials, problems, and perspectives10.3390/app9183798 ↗
11. Effect of the welding technique and post-welding heat treatments on the microstructure and mechanical properties of a high silicon nanostructured carbide-free bainitic steel10.1016/j.jmrt.2024.06.075 ↗
12. Tailoring friction stir welding and postheat treatment of high-carbon steels to obtain nanostructured bainite10.1080/01694243.2024.2322212 ↗
13. Corrosion resistance of the nanostructured X37CrMoV5-1 steel
14. Aqueous corrosion performance of nanostructured bainitic steel10.1016/j.matdes.2013.08.015 ↗
15. Effect of bainitic and retained austenite's length scale on the aqueous corrosion behaviour of nanostructured bainite in 3.5 wt% NaCl10.1016/j.mtla.2023.101921 ↗
16. Effect of tempering temperature on microstructure and mechanical properties of nanostructured bainitic steel10.1016/j.msea.2021.142357 ↗
17. Enhancing technological prospect of nanostructured bainitic steels by the control of thermal stability of austenite10.1016/j.matdes.2021.110143 ↗
18. Fatigue properties at elevated temperatures of secondary tempered nanostructured bainite: a study of deformation mechanisms10.1002/srin.202400105 ↗
19. Thermal stability of microstructure and corresponding hardness variations in two high-carbon nanostructured bainitic steels
20. The approach to equilibrium during tempering of a bulk nanocrystalline steel: an atom probe investigation10.1007/s10853-007-2157-x ↗
21. Severe tempering of bainite generated at low transformation temperatures10.3139/146.110788 ↗
22. Effect of tempering temperature and carbide free bainite on the mechanical characteristics of a high strength low alloy steel10.1016/S0921-5093(03)00270-3 ↗
23. Tempering of low-temperature bainite10.1007/s11661-017-4086-x ↗
24. Enhanced thermal stability in nanostructured bainitic steel10.1016/j.scriptamat.2013.03.029 ↗
25. Tempering of hard mixture of bainitic ferrite and austenite10.1179/026708304225017355 ↗
26. Retained austenite destabilization during tempering of low-temperature bainite10.3390/app10248901 ↗
27. Effect of prior martensite on the thermal stability of nanobainitic steels10.1088/2053-1591/aadec1 ↗
28. Redistribution of alloying elements during tempering of a nanocrystalline steel10.1016/j.actamat.2007.09.018 ↗
29. Thermal stability of austenite retained in bainitic steels10.1016/j.msea.2009.11.063 ↗
30. Design of new economic secondary precipitating steels for fatigue resistance at elevated service temperatures (SteelSeco), final Technical
31. Study of bainite and martensite tempering in a medium C high Si steel. microstructural disparities and equilibrium convergence10.1016/j.jmrt.2024.08.141 ↗
32. Stability of retained austenite and work hardening behavior in ultra-fine medium carbon bainitic steel10.1016/j.jmrt.2022.12.092 ↗
33. New insights for preformed martensite of carbide-free bainitic steels austempered below Ms temperature: inconsistent effects of microstructure, stability of retained austenite, and mechanical properties10.1016/j.jmrt.2024.12.209 ↗
34. Unravelling the mechanical behaviour of advanced multiphase steels isothermally obtained below M10.1016/j.matdes.2020.108484 ↗
35. Effect of austempering processes on the tensile properties and the work-hardening behavior of austempered bainitic steels below the martensite start temperature10.3390/ma16165562 ↗
36. Achieving ultrafine martensite-bainite duplex microstructures by combining prior cold deformation with chronological control of phase transformation in GCr15 bearing steel10.1016/j.jmrt.2025.05.094 ↗
37. Thermodynamic–kinetic calculations and dilatometric verification of the martensitic and bainitic transformations in 4% medium-Mn steel10.1007/s10973-024-13662-y ↗
38. Effect of microstructure transformation below MS temperature in bainitic steels on the impact-abrasive wear behavior
39. Effect of prior athermal martensite on the isothermal transformation kinetics below M s in a Low-C High-Si steel10.1007/s11661-015-3285-6 ↗
40. Characteristics and kinetics of bainite transformation behaviour in a high-silicon medium-carbon steel above and below the Ms temperature10.3390/ma15020539 ↗
41. Microstructural evolution and ultra-high impact toughness of austempered lamellar bainitic steel far below Ms temperature10.1016/j.jmrt.2023.04.172 ↗
42. Effect of pre-formed martensite quenching plus inverted multi-step heat treatment on medium-carbon alloy steel10.1007/s43452-023-00635-5 ↗
43. Constrained equilibrium reactions in a low carbon steel during heat treatments below the M S10.1002/srin.202200841 ↗
44. Nanostructured bainite transformation characteristics in medium-carbon steel subjected to ausforming and isothermal holding below martensite start temperature10.1016/j.jmrt.2023.01.002 ↗
45. Effect of isothermal heat treatments under M s temperature on the microstructures and mechanical properties of commercial high-silicon spring steel10.1515/mt-2022-0002 ↗
46. Carbide-free bainite transformations above and below martensite start temperature investigated by In-Situ high-energy X-Ray diffraction10.1007/s11837-021-04903-8 ↗
47. Characterization of bainitic/martensitic structures formed in isothermal treatments below the M s temperature10.1016/j.matchar.2017.04.007 ↗
48. Transformation kinetics of carbide-free bainitic steels during isothermal holding above and below MS10.1016/j.jmrt.2020.09.119 ↗
49. Direct observation that bainite can grow below MS10.1007/s11661-012-1342-y ↗
50. Experimental evidence for bainite formation below Ms in Fe–0.66C10.1016/j.scriptamat.2007.10.045 ↗
51. Effect of tempering temperature on isothermal decomposition product formed below Ms10.1016/j.jmrt.2012.11.001 ↗
52. Effect of isothermal transformation times below Ms and tempering on strength and toughness of low-temperature bainite in 0.53 C bainitic steel10.3390/ma13102418 ↗
53. Pre-martensite and bainite reactions: a thermal stability study10.1016/j.matdes.2025.113621 ↗
54. High-temperature stability of retained austenite and plastic deformation mechanism of ultra-fine bainitic steel isothermally treated below Ms10.1007/s42243-023-01151-9 ↗
55. Two design strategies for enhancing the thermal stability of bainitic structures10.1016/j.jmrt.2023.05.003 ↗
56. Secondary hardened bainite10.1179/1743284714Y.0000000536 ↗
57. Direct and indirect decomposition of retained austenite in continuously cooled bainitic steels: influence of vanadium10.1016/j.matchar.2021.110922 ↗
58. Controlling the thermal stability of a bainitic structure by alloy design and isothermal heat treatment10.3390/ma16082963 ↗
59. In-situ TEM/STEM observations of intermetallic growth and reverse transformation of ultra-fine bainitic steel10.1016/j.nantod.2025.102637 ↗
60. Ex-situ and in-situ S/TEM study of bainitic ferrite nucleation and martensite transformation for various heat treatment scenarios10.1016/j.actamat.2025.121386 ↗
61. Effects of tempering temperature on the microstructure and mechanical properties of vanadium-microalloyed medium-carbon bainitic steel10.3390/coatings15050503 ↗
62. Effect of prior martensite on the tempering stability of microstructure and hardness for low‐temperature bainite steel
63. Effect of tempering temperature on microstructure and Mechanical Properties of 2 . 25Cr-1Mo-0 . 25V Steel for Petrochemical Hydrogenation reactors
64. Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel10.1016/j.matdes.2021.110082 ↗
65. Tempering of lath martensite in low and medium carbon steels : assessment and challenges10.1002/srin.201700038 ↗
66. Reverse austenite transformation and grain growth in a low-carbon steel10.1007/s11661-016-3855-2 ↗
67. Role of cementite and retained austenite on austenite reversion from martensite and bainite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2021.116772 ↗
68. Effect of prior austenite grain size on austenite reversion, bainite transformation and mechanical properties of Fe-2Mn-0.2C steel10.1016/j.matchar.2024.114134 ↗
69. In-situ high-temperature EBSD study of austenite reversion from martensite, bainite and pearlite in a high-strength steel10.1016/j.jmst.2024.08.027 ↗
70. Reverse transformation from martensite into austenite in a medium-Mn steel10.1016/j.scriptamat.2018.09.046 ↗
71. Austenite memory during reverse transformation of steels at different heating rates10.1016/j.mtla.2019.100409 ↗
72. Microstructure evolution during reverse transformation of austenite from tempered martensite in low alloy steel10.2355/isijinternational.ISIJINT-2016-557 ↗
73. Microstructure characterization of nanocrystalline bainitic steel during tempering10.1016/j.jallcom.2018.05.174 ↗
74. Effect of tempering on the stability of retained austenite in carbide-free bainitic steel10.1016/j.msea.2022.143525 ↗