Boosting crack resistance via MgZn2 phase refinement achieved by tailoring cooling rate in Zn–5Al–1Mg hot-dip galvanized coatings
Source abstract
Abstract
Ultra-high strength and corrosion-resistant steel wires are critical for long-span suspension bridges. Hot-dip Zn-Al-Mg alloy coatings offer excellent anti-corrosion performance but are prone to cracking after formation, limiting their application. In this study, the alloy composition was designed through thermodynamic calculations, and Zn-5Al-1Mg alloy coatings were prepared via flux-assisted hot-dip galvanizing. The effects of cooling rate on the microstructure and crack resistance of the coatings were examined using in-situ tensile tests, high-throughput nanoindentation tests, and finite element analysis. In-situ tensile results revealed that cracks initially originated in the ternary eutectic regions and propagated along the MgZn 2 phases, with the crack paths influenced by the mechanical property mismatch between adjacent phases. Furthermore, it was revealed by the high-throughput nanoindentation tests that the hard and brittle MgZn 2 phases served as the primary sites for crack initiation. Moderate regulation of cooling rates facilitates the transformation of ternary eutectic phases were transitioned from a continuous network structure to finely dispersed phases, resulting in a significant alteration in crack resistance. The role of cooling rate in regulating microstructural evolution and crack resistance in Zn-Al-Mg coatings is elucidated in this study, and valuable insights are provided for enhancing the reliability of coated cables.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Influence of alloyed magnesium on the microstructure and long-term corrosion behavior of hot-dip Al-Zn-Si coating in NaCl solution10.1016/j.corsci.2015.12.014 ↗
2. Fatigue crack growth of cable steel wires in a suspension bridge: multiscaling and mesoscopic fracture mechanics10.1016/j.tafmec.2010.03.002 ↗
3. Fatigue crack growth behavior of cables and steel wires for the cable-stayed portion of Runyang bridge: disproportionate loosening and/or tightening of cables10.1016/j.tafmec.2007.10.008 ↗
4. Environmentally-assisted microstructural integrity of commercial cold drawn pearlitic steel wires10.1016/j.prostr.2022.02.037 ↗
5. Microstructure development, phase reaction characteristics and properties of quaternary Zn-0.5Al-0.5Mg-xBi hot dipped coating alloy under slow and fast cooling rates10.1016/j.surfcoat.2017.01.074 ↗
6. Composition of corrosion products formed on Zn-Mg, Zn-Al and Zn-Al-Mg coatings in model atmospheric conditions10.1016/j.corsci.2014.05.016 ↗
7. Solidification structure of the coating layer on hot-dip Zn-11%Al-3%Mg-0.2%Si-coated steel sheet10.2320/matertrans.MRA2008009 ↗
8. Surface and cut-edge corrosion behavior of Zn-Mg-Al alloy-coated steel sheets as a function of the alloy coating microstructure10.1007/s12540-015-5411-9 ↗
9. Roles of Al and Mg on the microstructure and corrosion resistance of Zn-Al-Mg hot-dipped coated steel10.3390/ma17071512 ↗
10. Influence of Mg and Al alloying additions on the corrosion mechanisms of hot-dipped Zn-Mg-Al coatings: role of microstructure and phase distribution10.1038/s41529-025-00647-x ↗
11. Effect of steel substrate roughness on microstructure and properties of hot-dip Zn–Al–Mg coating10.1016/j.jmrt.2025.09.233 ↗
12. Effect of anti-site point defects on the mechanical and thermodynamic properties of MgZn2, MgCu2 laves phases: a first-principle study10.1016/j.jssc.2018.04.001 ↗
13. A crystallographic study on the growth of laves phase MgZn2 during the solidification process of Zn–Mg alloy under a high magnetic field10.1007/s10853-018-2539-2 ↗
14. Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet10.1016/S0927-0256(00)00155-5 ↗
15. Effect of microstructure and texture on formability and mechanical properties of hot-dip galvanized steel sheets10.1016/j.jmatprotec.2007.05.035 ↗
16. Unraveling dislocation mediated plasticity and strengthening in crack-resistant ZnAlMg coatings10.1016/j.ijplas.2021.103041 ↗
17. The effect of grain refinement on the deformation and cracking resistance in Zn-Al-Mg coatings10.1016/j.msea.2022.142995 ↗
18. Modulation of brittle phases in advanced hot dip Zn-Al-Mg-Ni alloy coating on DP980 steel for improved cracking and corrosion resistance10.1016/j.surfcoat.2025.132938 ↗
19. Morphology and properties of hot dip Zn-Mg and Zn-Mg-Al alloy coatings on steel sheet10.1016/j.surfcoat.2010.10.006 ↗
20. Microstructure of hot-dip galvanized Zn-Al-Mg alloy coating10.1007/s12204-012-1342-5 ↗
21. Effects of aging on microstructure evolution and mechanical properties of high-temperature Zn-4Al-3Mg solder10.1108/SSMT-10-2013-0025 ↗
22. Structural properties of zinc and ZnMgAl coatings on steel sheets10.4028/www.scientific.net/MSF.782.623 ↗
23. Influence of stripping and cooling atmospheres on surface properties and corrosion of zinc galvanizing coatings10.1016/j.apsusc.2016.07.093 ↗
24. Effects of Al-Mg on the microstructure and phase distribution of Zn-Al-Mg coatings10.3390/met13010046 ↗
25. Zn-Al-Mg coatings: thermodynamic analysis and microstructure related properties10.4028/www.scientific.net/MSF.539-543.1276 ↗
26. Grain refinement with remarkable basal texture of hot-dipped Zn–Al–Mg alloy coating on a steel sheet: evidence of dendrite fragmentation10.1007/s12540-023-01463-1 ↗
27. Microstructure, phase evolution and corrosion behaviour of the Zn-Al-Mg-Sb alloy coating on steel10.1080/02670836.2019.1705587 ↗
28. Application of CALPHAD calculation in the microstructure design of the industrial Zn-Al-Mg coated product10.1007/s11669-025-01218-y ↗
29. Influence of microstructure of zinc-aluminium-magnesium alloy coated steel on the corrosion behavior in outdoor marine atmosphere10.1016/j.surfcoat.2019.06.052 ↗
30. Microstructural factors controlling crack resistance of Zn–Al–Mg alloy coatings prepared via hot-dip galvanizing process: combined approach of in-situ SEM observation with digital image correlation analysis10.1016/j.jmrt.2024.01.235 ↗
31. Atomic mechanisms of MgZn2 phase effects on crack propagation and dislocation shielding in magnesium alloys10.1007/s10853-025-11761-1 ↗
32. Effect of cooling rate on surface properties of ZnMgAl coating and adhesion to epoxy adhesive10.1016/j.ijadhadh.2022.103182 ↗
33. Experimental investigation and kinetic analysis of Al–Zn–Mg alloy coating10.1016/j.calphad.2023.102655 ↗
34. Effects of cooling rate on the microstructure and properties of hot-dipped Zn–Al–Mg coatings10.1016/j.surfcoat.2022.128665 ↗
35. Toward optimized cracking and corrosion resistance in Zn-Al-Mg coatings
36. Thermodynamic simulation calculations of phase transformations in low-aluminum Zn-Al-Mg coatings10.3390/ma17112719 ↗
37. Research on design and microstructure of hot-dip Zn-Al-Mg/Sn alloy10.1016/j.matchar.2022.111746 ↗
38. Effect of Al/Mg ratio on the microstructure and phase distribution of Zn-Al-Mg coatings10.3390/met13121963 ↗
39. Simulation of the composition and cooling rate effects on the solidification path of casting aluminum alloys10.1007/s11669-020-00834-0 ↗
40. Effect of rapid solidification on the structure and phase composition of Mg–Al–Zn, Mg–Nd–Zr, and Mg–Li–Al alloys10.1134/S0036029521060070 ↗
41. TEM study on the microstructure of the Zn-Al-Mg alloy10.1016/j.matchar.2017.05.011 ↗
42. The microstructure, fracture mechanism and their correlation with the mechanical properties of as-cast Mg-Nd-Zn-Zr alloy under the effect of cooling rate10.1016/j.msea.2020.140382 ↗
43. Quantitative uniqueness in the Lamé system: a step closer to optimal coefficient regularity10.1016/j.jde.2024.03.027 ↗
44. Practical estimation method for extreme value distribution of von Mises stress in ship structure10.1007/s00773-022-00904-7 ↗
45. Microstructure evolution and corrosion resistance of directionally solidified Zn-11Al-3Mg-0.2Si alloy with discontinuous changes in growth rates
46. Impact of cooling rates on the microstructure and cracking susceptibility of hot-dip galvanized Zn-12 wt% Al-5 wt% Mg coatings10.1016/j.surfcoat.2024.131050 ↗
47. The initial corrosion mechanism of hot-dipping Zn–Al–Mg alloy coating in chloride-containing solution10.1007/s10853-024-10410-3 ↗
48. Positive enhancement mechanism of Al element on the corrosion resistance of 15–5PH stainless steel in sea water heat exchanger environment10.1016/j.corsci.2026.113726 ↗
49. Effect of SO2 and NH3 on the corrosion failure of Zn-Al-Mg coatings10.1016/j.surfcoat.2024.131244 ↗
50. Long-term corrosion behavior and mechanism of hot-dip Zn–Al–Mg coating in typical Chinese soil environments10.1016/j.matchemphys.2026.132136 ↗
51. The effect of microstructural refinement on the localized corrosion of model Zn-Al-Mg alloy coatings on steel10.1149/2.0171911jes ↗
52. Tailoring of oxide morphology and crystallinity on advanced high-strength steel surfaces prior hot-dip galvanizing10.1016/j.actamat.2014.03.037 ↗
53. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
54. Microstructural characterization and quantification of Zn-Al-Mg surface coatings10.1016/j.matchar.2010.06.008 ↗
55. Comparative investigation into the liquid metal embrittlement susceptibility during resistance spot welding of Zn–Al–Mg and GI coated advanced high strength steels
56. Cracking behavior and formability of Zn-Al-Mg coatings: understanding the influence of steel substrates10.1016/j.matdes.2021.110215 ↗
57. Effect of heat treatment on the intermetallic phase transformation and corrosion performance of Zn-Al-Mg alloy coated steel sheets in chloride-containing environments10.1016/j.jallcom.2025.181837 ↗