A study on the nucleation of tensile cracks in high-purity ferritic and ferrite-pearlite steels
Source abstract
Abstract
The initiation and evolution of cracks during deformation are regarded as core indicators for evaluating the structural integrity of steel materials. Microstructural evolution and crack nucleation mechanisms in single-phase ferrite (HYT2) and ferrite-pearlite steels (Q195 and Q235) during tensile deformation were systematically investigated using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). It is shown that crack nucleation is strongly regulated by microstructural features and is explicitly classified into four categories: ferrite-ferrite (F/F) grain boundaries, ferrite-pearlite (F/P) phase boundaries, pearlite-pearlite (P/P) colony boundaries, and inclusion-matrix interfaces. Quantitative analysis indicates that the type of interface has a significant influence on crack initiation, with the interface nucleation stress exhibiting a prominent hierarchy: homophase interfaces > heterophase interfaces > inclusion interfaces. A foundation for understanding the initiation and evolution of cracks during the deformation of steel materials is established in this study, and a critical theoretical basis is provided for the material evaluation and failure prevention of engineering components, such as cathode steel bars used in aluminum electrolysis.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Phase-field modeling of austenite formation from a ferrite plus pearlite microstructure during annealing of cold-rolled dual-phase steel10.1007/s11661-011-0626-y ↗
2. Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel10.1016/j.msea.2021.142584 ↗
3. High strength-elongation balance in ultrafine grained ferrite-martensite dual phase steels developed by thermomechanical processing10.1016/j.msea.2019.06.031 ↗
4. Detection of cathode steel rod of aluminium electrolyzer by impact echo method
5. The impact of cathode material and shape on current density in an aluminum electrolysis cell10.1007/s11837-015-1719-7 ↗
6. Effect of purity on the tensile mechanical behavior of pure iron[J]. Materials science and engineering,a:structural materials: properties
7. Atomistic scale behaviors of intergranular crack propagation along twist grain boundary in iron under dynamic loading10.1016/j.engfracmech.2022.108731 ↗
8. Fatigue crack growth behaviors in hot-rolled low carbon steels: a comparison between ferrite–pearlite and ferrite–bainite microstructures10.1016/j.msea.2012.09.036 ↗
9. Plastic deformation of Ferrite—pearlite structures in steel10.1016/0025-5416(75)90232-3 ↗
10. Dynamic studies of the tensile deformation and fracture of pearlite10.1016/0001-6160(78)90156-6 ↗
11. Ductile fracture initiation in pure α-Fe: part II. Microscopic observations of an initiation mechanism10.1007/BF02670704 ↗
12. Ductile fracture initiation in pure α-Fe: part I. Macroscopic observations of the deformation history and failure of crystals10.1007/BF02670703 ↗
13. Study on micro crack propagation mechanism of ferrite–pearlite gas transmission pipeline steel with lamellar structure10.1038/s41598-022-23405-4 ↗
14. In situ study of cementite deformation and its fracture mechanism in pearlitic steels10.1016/j.msea.2018.05.114 ↗
15. Xu · 1982
16. Investigation of micro-crack initiation as a trigger of cleavage fracture in ferrite-pearlite steels10.2355/isijinternational.ISIJINT-2016-396 ↗
17. Porter · 1979 · 87
18. Cao · 2007
19. A multiscale approach for the deformation mechanism in pearlite microstructure: atomistic study of the role of the heterointerface on ductility10.1016/j.msea.2013.12.100 ↗
20. Molecular dynamics investigation of the fracture behavior of nanocrystalline α-Fe10.1103/PhysRevB.69.134110 ↗
21. Atomistic scale behaviors of crack propagation in nanocrystalline bcc iron10.1016/j.msea.2021.140948 ↗
22. Intergranular fracture in nanocrystalline metals10.1103/PhysRevB.66.060101 ↗
23. Enhancing the strength-ductility synergy in an iron-based multi-principal element alloy via modulating Mo-rich precipitation10.1016/j.jmrt.2025.05.186 ↗
24. 2021
25. Formation and strengthening mechanism of kink bands in an ultra-coarse-grained fe-cr-al alloy10.1016/j.jmst.2023.11.017 ↗
26. Dynamic strain aging and serrated flow behavior of Cr-Ti-B low carbon steel during warm deformation10.1016/j.matchar.2020.110828 ↗
27. Effect of purity on the tensile mechanical behavior of pure iron10.1016/j.msea.2024.147616 ↗
28. Low temperature mechanical properties of high purity iron and effects of small amounts of solutes on them10.2320/matertrans1960.26.527 ↗
29. Analysis of the micro and substructural evolution during severe plastic deformation of ARMCO iron and consequences in mechanical properties10.1016/j.msea.2018.10.100 ↗
30. Methods for evaluating fracture patterns of polycrystalline materials based on the parameter analysis of fatigue striations: a review10.1016/j.mex.2024.102989 ↗
31. Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.02.059 ↗
32. Gladman · 1997
33. Investigation on micromechanism involved in ferrite hardening after prestraining of dual-phase steel10.1016/j.msea.2020.140387 ↗
34. Enhancing the strength-ductility synergy in an iron-based multi-principal element alloy via modulating Mo-rich precipitation10.1016/j.jmrt.2025.05.186 ↗
35. Cold-rolling & annealing process for nuclear grade wrought FeCrAl cladding alloy to enhance the strength and ductility10.1016/j.jmatprotec.2019.116434 ↗
36. Six decades of the hall–petch effect–a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
37. A model for the microstructure behaviour and strength evolution in lath martensite10.1016/j.actamat.2015.07.018 ↗
38. The role of microstructure on the strength and toughness of fully pearlitic steels10.1007/BF02656606 ↗
39. Leslie · 1996 · 1555
40. Growth twins and deformation twins in metals10.1146/annurev-matsci-070813-113304 ↗
41. A vacancy/dislocation interaction mechanism of transgranular stress corrosion cracking10.1515/JMBM.1995.6.1.69 ↗
42. Void growth via dislocation pileup impingement on grain boundary10.1016/j.matlet.2021.129542 ↗
43. Wing Hei Kwok · 2011
44. Fracture surface microstructure and new fracture mechanism in the pearlite structure10.1016/j.jmrt.2024.06.211 ↗
45. Cleavage fracture and microstructural effects on the toughness of a medium carbon pearlitic steel for high-speed railway wheel10.1016/j.msea.2019.138036 ↗
46. High-cycle fatigue crack paths in specimens having different stress concentration features10.1016/j.engfailanal.2006.02.004 ↗
47. Microstructure-based modelling of fracture in progressively drawn pearlitic steels10.1016/S0013-7944(03)00014-6 ↗
48. Boundary strengthening in undeformed and deformed polycrystals10.1016/j.msea.2005.04.061 ↗
49. A multiscale approach for the deformation mechanism in pearlite microstructure: experimental measurements of strain distribution using a novel technique of precision markers10.1016/j.msea.2013.09.072 ↗
50. Insitu TEM studies of the mechanisms of crack nucleation and propagation in fully lamellar microstructures10.1179/026708303225004378 ↗
51. Lavogiez · 2020
52. GRAIN-SIZE dependence of fracture in copper–aluminium alloys embrittled by mercury10.1139/p67-092 ↗
53. A study on the trade-off between strength and thermal conductivity in pure iron: the role of impurity elements