Study on evolution of microstructure and properties of ceramics joints brazed by 50Bi2O3–45B2O3–5SiO2 glass
Source abstract
Abstract
Low-temperature brazing of ceramics in air enviroment by using 50Bi 2 O 3 –45B 2 O 3 –5SiO 2 glass was studied. Bi–B–O system crystals were found in the BBS glass under a parameter of 580 °C/5 min at wetting experiment, which was identified as Bi 4 B 2 O 9 . No obvious crystallization were found in all the joints brazed at 575-675 °C, shear strength of joint brazed at 650 °C/5 min reached the maximum value of 53.9 MPa. At this temperature, fracture of the joint was mainly deep striations and microcrack. Fracture of joints was smoother with the decrease of mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Glass properties and applications · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Realizing the air brazing of ZrO2 ceramics through Al metal10.1016/j.jmat.2021.11.006 ↗
2. Laser-joined Al2O3 and ZrO2 ceramics for high-temperature applications10.1016/j.jnucmat.2010.07.020 ↗
3. Interactions, joining and microstructure of Sn-Ti/ZrO2 system10.1016/j.jeurceramsoc.2018.12.010 ↗
4. Microstructure evolution and bonding mechanism of ZrO2 ceramic and Ti-6Al-4V alloy joints brazed by Bi2O3-B2O3-ZnO glass paste10.1016/j.jeurceramsoc.2022.06.016 ↗
5. Active metal brazing of zirconia10.1016/S1359-6454(00)00256-1 ↗
6. Blackening mechanism and mechanical properties variation of zirconia ceramic induced by active metal brazing10.1002/adem.202200105 ↗
7. Joining of Al2O3 to Cu with Cu-Sn-Ti active brazing filler alloy10.1007/s40194-022-01305-5 ↗
8. High-frequency induction brazing of Al2O3 ceramics with SiO2-Na2O-K2O-CaO glass filler based on graphite heat transfer medium
9. The formation mechanism of pores and unbonding in the Al2O3/Al2O3 joints brazed by 50Bi2O3–35B2O3–15ZnO glass10.1016/j.ceramint.2019.10.277 ↗
10. Vacuum brazing of biomedical TNZ alloy to ZrO2 ceramic using Sn–Zr filler: interfacial microstructure and mechanical properties10.1007/s10853-023-09068-0 ↗
11. Microstructures and mechanical properties of brazed Al2O3/Cu joints with bismuth glass10.1016/j.ceramint.2019.05.123 ↗
12. Low-temperature brazing of alumina ceramics with bismuth-borate glass in air10.1016/j.matchar.2019.01.020 ↗
13. ZrO2–Al2O3 composites with tailored toughness10.1016/j.jallcom.2003.09.157 ↗
14. Preparation and mechanical properties of Al2O3–15wt.% ZrO2 composites10.1016/S1359-6462(02)00440-2 ↗
15. Microstructure evolution and mechanical properties of sapphire joints brazed by 50Bi2O3-40B2O3-10SiO2 glass braze10.1016/j.ceramint.2025.10.418 ↗