Effect of aging temperature on microstructure and properties of Ti–5Al–5Mo–5V–1Cr–1Fe alloy by hot isostatic pressing
Source abstract
Abstract
Ti-5Al-5Mo-5V-1Cr-1Fe alloy was fabricated by hot isostatic pressing (HIP), and the effect of aging temperature on its microstructure and mechanical properties was investigated. The results show that the microstructure of the HIPed TC18 titanium alloy consists of equiaxed α phase, lath α phase, α s phase, and a small amount of β phase. Solution and aging treatment can promote the precipitation of α s phase from the β phase. When the aging temperature is 500°C, the alloy achieves a tensile strength of 1341 MPa and a yield strength of 1267.5 MPa. As the aging temperature increases to 650°C the content of α s phase decreases and coarsening of the α s phase occurs. Although this microstructural evolution leads to a reduction in the strength of the alloy, it significantly improves its plastic deformation capacity, resulting in an elongation of 22.25% and a reduction of area of 59%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Direct observations of dynamic and reverse transformation of Ti-6Al-4V alloy and pure titanium10.1016/j.actamat.2024.119780 ↗
2. Microstructure evolution during warm working of Ti–5Al–5Mo–5V–1Cr–1Fe at 600 and 800 °C
3. Competition between dynamic recovery and recrystallization during hot deformation for TC18 titanium alloy10.1016/j.msea.2015.03.071 ↗
4. Tuning the scale of α precipitates in β titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
5. Tensile behavior of Ti,Mo-added low carbon steels with interphase precipitation10.2355/isijinternational.54.474 ↗
6. Soundararajan · 2020
7. Investigation into the stress–strain compatibility and fracture behaviour of a TC18 titanium alloy with a multistage lamellar microstructure10.1016/j.pnsc.2024.07.020 ↗
8. Microstructure evolution and fracture behavior of Ti-5Al-3Mo-3V-2Zr-2Cr-1Nb-1Fe alloy during BASCA heat treatments10.1016/j.matchar.2021.110975 ↗
9. On the fracture behavior and toughness of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2019.03.031 ↗
10. Effect of parent β-texture on α-texture evolution during dynamic precipitation in a continuous forging process of Ti-6Al-4V alloy10.1016/j.jallcom.2023.169425 ↗
11. Advancing fracture toughness in high-strength TC18 alloy by optimizing the forging process10.1016/j.msea.2024.146857 ↗
12. Effects of quasi-β phase forging plus duplex ageing process on microstructure evolution and mechanical properties of TC18 alloy10.1016/j.mtcomm.2026.114810 ↗
13. Preparation of high-strength TC18 titanium alloy by constructing dual heterostructures through deformation heat treatment
14. Froes · 1984
15. Properties and forming process of prealloyed powder metallurgy Ti-6Al-4V alloy
16. Study on the relationship between microstructure and mechanical property in a metastable β titanium alloy10.1016/j.jallcom.2014.12.100 ↗
17. Effect of aging temperature on mechanical properties of TC21 alloy with multi-level lamellar microstructure10.1016/j.msea.2022.142825 ↗
18. Improvement of microstructure homogenous and tensile properties of powder hot isostatic pressed TA15 titanium alloy via heat treatment10.1016/j.matlet.2021.131585 ↗
19. Effect of heat treatments on the microstructure and mechanical properties of a Ti–5Al–5Mo–5V–1Fe–1Cr alloy10.1016/j.jmrt.2024.12.168 ↗
20. Correlation between microstructure and tensile properties in TC18 alloy with lamella structure
21. Effect of microstructure on the mechanical properties of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
22. Microstructure and mechanical properties evolution of Ti-5Al-5Mo-5V-1Cr-1Fe alloy under rapid heat treatment10.1016/j.jmrt.2023.04.058 ↗
23. Zhu · 2024
24. Influence of duplex ageing on secondary α precipitates and mechanical properties of the near β-Ti alloy Ti-5553110.1016/j.matchar.2018.06.025 ↗
25. Tensile performanceand impact toughness of Ti-55531 alloy with multilevel lamellar microstructure10.1007/s10853-021-05844-y ↗
26. Thermomechanical treatment-induced microstructure refinement to optimize mechanical properties of TC21 titanium alloys
27. Effect of aging temperatures on the microstructure and mechanical properties of TC21 forgings with basket–weave microstructure10.1016/j.matchar.2024.114270 ↗
28. Preparation of high-strength TC18 titanium alloy by constructing dual heterostructures through deformation heat treatment
29. "Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy10.1016/j.matchar.2020.110521 ↗
30. In situ deformation behavior of TC21 titanium alloy with different α morphologies (equiaxed/lamellar)10.1007/s12598-020-01657-1 ↗
31. Microstructural evolution, mechanical properties and fracture toughness of near β titanium alloy during different solution plus aging heat treatments10.1016/j.jallcom.2019.07.134 ↗
32. Mechanical properties and strengthening–toughening mechanisms of the TC21 titanium alloy with different microstructures10.1016/j.msea.2026.150156 ↗