Ru element-induced recrystallization behavior in a fourth-generation Ni-based single crystal superalloy
Source abstract
Abstract
The effect of 3 wt% Ru addition on the recrystallization behavior of a Ni-based single crystal superalloy was systematically investigated. The results revealed that Ru addition significantly promoted the microsegregation of Al and Ta elements into the interdendritic region during solidification, leading to an increased volume fraction of γ/γ′ eutectic from 6.67% in the Ru-free alloy to 9.5% in the 3Ru alloy. These enlarged eutectic regions, which exhibited lower deformation resistance than the dendrite cores, acted as preferential sites for strain concentration during indentation deformation, resulting in a larger deformation zone with higher dislocation density beneath the indentation in the 3Ru alloy. Upon subsequent heat treatment at 1315 °C, the recrystallization preferentially nucleated within these highly deformed γ/γ′ eutectic areas via the particle stimulated nucleation (PSN) mechanism. Consequently, the alloy with 3 wt% Ru additions exhibited a larger recrystallized area and coarser recrystallized grains compared to the Ru-free alloy. This work demonstrated that Ru addition promoted PSN-mediated recrystallization nucleation by increasing the γ/γ′ eutectic content at as-cast and enhancing deformation localization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. The development of single crystal superalloy turbine blades
2. Misorientation related microstructure at the grain boundary in a nickel-based single crystal superalloy10.1016/j.msea.2015.05.089 ↗
3. Effect of thermal exposure on the microstructure and creep properties of a fourth-generation Ni-based single crystal superalloy10.1016/j.jmst.2020.07.008 ↗
4. Influence of Mo and Ru additions on the creep behavior of Ni-based single crystal superalloys at 1100° C10.1016/j.msea.2018.04.026 ↗
5. High temperature creep of directionally solidified Ni-base superalloys containing local recrystallization
6. Recrystallization behavior of single-crystal hollow blade tenon
7. Influence of recrystallization on high-temperature stress rupture property and fracture behavior of single crystal superalloy10.1016/j.msea.2012.04.109 ↗
8. Effect of surface recrystallization on the creep rupture properties of a nickel-base single crystal superalloy10.1016/j.msea.2010.04.071 ↗
9. Characterization of nanocrystalline Cu25Mo electrical contact material synthesized via ball milling10.12693/APhysPolA.132.886 ↗
10. Arc-erosion behavior of boric oxide-reinforced silver-based electrical contact materials produced by mechanical alloying10.1007/s11664-014-3399-4 ↗
11. New insights into the microstructural stability based on the element segregation behavior at γ/γ′ interface in Ni-based single crystal superalloys with Ru addition10.1016/j.jmst.2023.02.007 ↗
12. Effects of Ru on the high-temperature phase stability of Ni-base single-crystal superalloys10.1007/BF02586097 ↗
13. The effects of key elements re and Ru on the phase morphologies and microstructure in Ni-based single crystal superalloys10.1016/j.jallcom.2022.166835 ↗
14. Effect of Y2O3 addition and milling time on the synthesis of nanocrystalline Ag–ZnO composite powder via mechanical alloying
15. Influence of polyethylene glycol and methanol additions on the mechanical alloying behavior of Cu-4B4C composite powder10.22399/ijcesen.317 ↗
16. The formation and evolution of NiAl phase in a fourth generation nickel-based single crystal superalloy10.1016/j.jallcom.2020.156584 ↗
17. Effect of Ru on macro-/micro-structure evolution within platform of Ni-based superalloy single crystal blades10.1016/j.jallcom.2019.153337 ↗
18. The segregation of elements in high-refractory-content single-crystal nickel-based superalloys10.1007/s11837-004-0200-9 ↗
19. Surface recrystallization of single crystal nickel-based superalloy10.1016/S1003-6326(13)62595-9 ↗
20. Recrystallization of Ni3Al base single crystal alloy IC6SX with different surface mechanical processes10.1016/S1005-0302(10)60141-7 ↗
21. Orientational dependence of recrystallization in an Ni-base single-crystal superalloy10.1016/j.scriptamat.2011.11.037 ↗
22. An experimental study of the recrystallization mechanism during hot deformation of aluminium10.1016/S0921-5093(00)00733-4 ↗
23. Effect of carbon content on the recrystallization of a single crystal nickel-based superalloy10.1016/j.matlet.2013.07.073 ↗
24. Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel base superalloy CMSX-2 part 1-Microstructural evolution during recrystallisation of single crystal10.1179/026708303225008301 ↗
25. Study on nucleation site and mechanism of recrystallization behavior for DD6 nickel-base single crystal superalloy
26. Prediction of recrystallization in investment cast single-crystal superalloys10.1016/j.actamat.2012.09.013 ↗
27. Deformation and recrystallization of single crystal nickel-based superalloys during investment casting10.1016/j.jmatprotec.2014.10.019 ↗
28. Nucleation of recrystallisation in castings of single crystal Ni-based superalloys10.1016/j.actamat.2017.02.058 ↗
29. Role of as-cast dendritic microstructure in recrystallization of a Ni-based single crystal superalloy10.1016/j.jallcom.2015.11.072 ↗
30. Effect of W and re on recrystallization of as-cast Ni-based single crystal superalloys
31. Effect of TiO2 content on the arc-erosion resistance of Ag/SnO2 electrical contact materials prepared via mechanical alloying-assisted powder metallurgy10.1007/s11664-026-12701-8 ↗
32. The effect of the amount of process control agent on the properties of Cu25W composite powder10.2495/HPSM140171 ↗
33. Secondary orientation regulating dendrite growth behavior in single crystal blades by dendrite growth path and solute distribution10.1016/j.jallcom.2026.186282 ↗
34. Uniformity of thedendritic microstructure in large-sized single-crystal superalloy blades10.1007/s11661-023-06963-8 ↗
35. A quasi in-situinvestigation of the cell to dendrite transition using Ni-W single crystal alloy10.1016/j.jallcom.2024.175440 ↗
36. Effects of Re and Ru on the solidification characteristics of nickel-base single-crystal superalloys10.1007/s11661-011-0673-4 ↗
37. Modeling of recrystallization after inhomogeneous deformation10.1007/s11661-001-0195-6 ↗
38. Subsurface plastic strain distribution around spherical indentations in metals10.1080/01418619608239721 ↗
39. Impact deformation and damage of a high chromium white cast iron by spherical projectile at normal incidence10.1016/0043-1648(91)90355-X ↗
40. Mechanical properties and fracture behavior of laser powder-bed-fused GH3536 superalloy10.3390/met12071165 ↗
41. A perceptive comparison of the cellular automata and monte carlo techniques in application to static recrystallization modeling in polycrystalline materials10.1016/j.commatsci.2012.08.047 ↗
42. The recrystallization of nickel-base superalloys10.1007/BF02402788 ↗
43. Three-dimensional investigation of particle-stimulated nucleation in a nickel alloy10.1016/j.actamat.2007.05.045 ↗
44. The deformation and the recrystallization initiation in the dendrite core and interdendritic regions of a directionally solidified nickel-based superalloy10.1016/j.jallcom.2014.12.135 ↗
45. The particle stimulated nucleation in Ti–35V–15Cr–0.3Si–0.1C alloy10.1016/j.matlet.2015.12.104 ↗
46. Effect of TiB particles on the beta recrystallization behavior of the Ti-2Al-9.2Mo-2Fe-0.1B metastable beta titanium alloy10.1016/j.matchar.2019.04.023 ↗
47. On the role of eutectics during recrystallization in a single crystal nickel-base superalloy–CMSX-410.3139/146.110155 ↗
48. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
49. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
50. Investigation and simulation of the effects of nm-Scale γ′ precipitates on the recrystallization of Ni-based superalloys10.1007/s11661-023-07008-w ↗
51. Recrystallization and texture10.1016/S0079-6425(97)00007-8 ↗
52. The work-hardening of copper-silica10.1080/14786437108217406 ↗
53. Humphreys · 2012
54. Local lattice rotations at second phase particles in deformed metals10.1016/0001-6160(79)90071-3 ↗