Crack closure during fatigue crack propagation of IN718 superalloy under high positive stress ratios
Source abstract
Abstract
Crack closure commonly occurs during fatigue crack propagation of IN718 superalloy. The fatigue crack growth rate of IN718 superalloy was evaluated under several positive stress ratios at room temperature and the plastic deformation characteristics of the wake zone were analyzed. Nanocrystalline thin layers were observed in the wake region of all specimens, indicating that the plasticity-induced crack closure effect persists even at higher positive stress ratios. The thickness of these layers decreased with increasing stress ratio, indicating a positive correlation between the thickness of the nanocrystalline layer and the plasticity-induced crack closure effect. Subsequently, a thinner nanocrystalline layer was associated with a higher fatigue crack growth rate and a lower threshold value. Furthermore, the formation mechanism of the nanocrystalline thin layers was elucidated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Microstructural evolution and mechanical properties of Inconel 718 after thermal exposure10.1016/j.msea.2015.03.004 ↗
2. New constitutive model for high-temperature deformation behavior of Inconel 718 superalloy10.1016/j.matdes.2015.03.001 ↗
3. Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy10.1016/j.jallcom.2015.07.149 ↗
4. Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 71810.1016/j.surfcoat.2019.07.057 ↗
5. Influences of pre-precipitated phase on microstructures and hot compressive deformation features of a nickel-based superalloy10.1016/j.vacuum.2018.12.043 ↗
6. Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures10.1016/j.matchar.2019.01.028 ↗
7. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
8. The low cycle fatigue of three wrought nickel-base alloys
9. Low cycle fatigue behavior of Inconel 718 at 298 K and 823 K
10. Influences of long-term aging on microstructure evolution and low cycle fatigue behavior of GH4169 alloy
11. Fatigue crack propagation behavior of IN718 superalloy aged with temperature/stress coupled field
12. Dependence of creep fracture of Inconel 718 on grain boundary precipitates10.1016/S1359-6454(96)00399-0 ↗
13. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy10.1016/j.msea.2008.04.097 ↗
14. Effect of thermal treatment on the fatigue crack propagation behavior of a new Ni-base superalloy10.1016/j.msea.2007.05.033 ↗
15. Enhancing fatigue strength of selective laser melting-fabricated Inconel 718 by tailoring heat treatment route
16. Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition10.1016/j.ijfatigue.2020.106005 ↗
17. Effect of stress ratio on the fatigue crack propagation behavior of the nickel-based GH4169 alloy10.1007/s40195-017-0567-6 ↗
18. Effect of frequency and orientation on fatigue crack growth behavior of forged turbine disc of IN 718 superalloy10.1016/j.msea.2012.02.088 ↗
19. Frequency and wave-form effects on the fatigue crack growth behavior of alloy 718 at 298 K and 823 K10.1007/BF02646402 ↗
20. Crack closure of Ni-based superalloy 718 at high negative stress ratios10.1016/j.ijfatigue.2022.106822 ↗
21. Zhong · 2006
22. Experimental investigation of grain size effect on fatigue crack growth rate in turbine disc superalloy GH4169 under different temperatures10.1016/j.msea.2016.05.063 ↗
23. Fatigue crack closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
24. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
25. Crack closure under high load-ratio conditions for Inconel-718 near threshold behavior10.1016/j.engfracmech.2008.09.009 ↗
26. Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels10.1016/j.scriptamat.2012.07.049 ↗
27. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
28. Transient behaviour in the numerical analysis of plasticity induced crack closure10.1111/ffe.12134 ↗
29. Effects of residual stresses on fracture behaviour-experimental results and assessment methods10.1243/0309324001514431 ↗
30. Effect of residual stresses on crack behaviour in single edge bending specimens10.1111/j.1460-2695.2012.01704.x ↗
31. Fatigue crack growth in the heat affected zone of a hydraulic turbine runner weld10.1016/j.ijfatigue.2014.03.006 ↗
32. Effect of boron on fatigue crack growth behavior in superalloy IN 718 at RT and 650°C10.1016/j.msea.2005.08.206 ↗
33. Effect of shot peening on the fatigue properties of nickel-based superalloy GH4169 at high temperature10.1016/j.rinp.2018.09.047 ↗
34. Surface nanocrystallization of iron induced by ultrasonic shot peening10.1016/S0965-9773(99)00324-4 ↗
35. Evolution behavior of γ″ phase of IN718 superalloy in temperature/stress coupled field10.1007/s12613-021-2317-z ↗
36. Microstructure and tensile properties of IN718 superalloy aged with temperature/stress coupled field10.1016/j.jmrt.2023.02.124 ↗