Effect of Zn/Mg ratio on precipitation and strengthening of Al–Zn–Mg alloys after aging
Source abstract
Abstract
The influence of Zn/Mg ratio (1.2-3.5) on the precipitation and strengthening effect of Al-Zn-Mg (Zn+Mg=10wt.%) alloys aged at 130°C was investigated by hardness test, tensile test at room temperature combined with microstructure examination by using optical microscopy, transmission electron microscopy and high resolution transmission electron microscopy. The hardness of the peak-aged alloys tends to increase with the increase of Zn/Mg ratio. The yield strength of the aged alloys increases when Zn/Mg ratio increases from 1.2 to 2.3, with an increased rate of about 6.2%, and then exhibits little change after 2.3. T′ (Al 2 Mg 3 Zn 3 ) and η′ (MgZn 2 ) strengthening phase co-exist in the aged alloys; with the increase of Zn/Mg ratio, their sizes exhibit little change, the quantity decreases for T′ phase but increases for η′ phase. The calculation based on dislocation by-passing mechanism shows that T′ phase and η′ phase makes main and minor contribution to precipitation strengthening, respectively, and the total precipitation strengthening exhibits a first increase and then slight decrease trend with the increase of Zn/Mg ratio. The increments of yield strength after aging were calculated considering both precipitation strengthening and solution strengthening, and the results are in good agreement with the experimental ones.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Development and applications of aluminum alloys for aerospace industry10.1016/j.jmrt.2023.09.274 ↗
2. Hot stamping of aerospace aluminium alloys: automotive technologies for the aeronautics industry10.1016/j.jmapro.2022.07.032 ↗
3. Effect of Cu content on intergranular corrosion and exfoliation corrosion susceptibility of Al-Zn-Mg-(Cu) alloys10.1016/S1003-6326(23)66236-3 ↗
4. Research progress on effects of Sc and Zr microalloying on microstructure and properties of Al-Zn-Mg-(Cu) alloys
5. Effects of enhanced solid solution on microstructure and properties of Al-Zn-Mg-Cu alloys used in fasteners
6. The effect of precipitate-free zone on mechanical properties in Al-Zn-Mg-Cu aluminum alloy: Strain-induced back stress strengthening10.1016/j.jallcom.2023.172426 ↗
7. Effect of interrupt aging on mechanical properties and local corrosion resistance of Al-Zn-Mg-Cu alloy thick plate
8. Co-precipitation of T′ and η′ phase in Al-Zn-Mg-Cu alloys10.1016/j.matchar.2020.110610 ↗
9. Precipitation evolution of Al-Zn-Mg-Cu-(Ag) alloys with a low Zn/Mg ratio10.1016/j.jmst.2023.12.071 ↗
10. Mechanism of the dependence of precipitation behavior on stress level during stress-aging in an Al-Zn-Mg alloy
11. Microstructure observation of T-phase in Al-Zn-Mg alloy with low Zn/Mg ratio10.1016/j.jallcom.2024.177781 ↗
12. Revisiting the precipitation mechanisms of Guinier-preston zones,η',and η precipitates in Al-Zn-Mg alloys10.1016/j.actamat.2024.119789 ↗
13. Effect of Zn content and Sc、Zr addition on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys10.1016/j.jallcom.2023.169246 ↗
14. Effect of element and deformation on ageing precipitation hardening and microstructure of Al-Zn-Mg(-Cu) alloys[D]
15. Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: multiple experiments and integrated internal-state-variable modeling10.1016/j.jmst.2021.12.008 ↗
16. Effects of Mg content on precipitation and strengthening of high zinc Al-9Zn-xMg-1Cu alloy after aging
17. Investigation on precipitate behavior and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios10.1016/j.jmrt.2024.10.237 ↗
18. Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios10.1016/j.jmst.2020.12.045 ↗
19. Effect of Zn/Mg ratio on microstructure and mechanical properties of Al-Zn-Mg alloys10.1016/j.matlet.2022.131676 ↗
20. Effects of Zn content and Zn/Mg ratio on tensile properties and hardenability of Al-Zn-Mg-Cu alloy
21. Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys10.1016/j.matchar.2016.06.007 ↗
22. Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy10.1016/j.matchar.2020.110184 ↗
23. Influence of predeformation and ageing of an Al-Zn-Mg alloy-II. modeling of precipitation kinetics and yield stress10.1016/S1359-6454(98)00296-1 ↗
24. Quantitative relationship between microstructure and tensile properties of Al–Zn–Mg–Cu alloys with various alloying degrees10.1016/j.jmrt.2022.04.153 ↗
25. Mechanism for enhanced precipitation strengthening due to the addition of copper to Al-Zn-Mg alloys with high Zn/Mg ratio
26. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation -strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
27. Understanding the effect of deformation combined with heat treatment on age hardening of Al-Zn-Mg-Cu alloy AA707510.1016/j.msea.2023.145212 ↗