Effect of rotary forging on the gradient microstructure and mechanical properties of a biodegradable Mg-0.2Ca-0.2Ce-4Y alloy
Source abstract
Abstract
Magnesium alloys are promising biodegradable materials for load-bearing implants, yet their clinical application is hindered by insufficient yield strength. In this study, high-strength Mg-0.2Ca-0.2Ce-4Y alloy bars were fabricated via rotary forging. A pronounced radial gradient microstructure was developed, characterized by refined grains, dense dislocations, and heterogeneous distribution of precipitates, which was attributed to the strain gradient during processing. Consequently, the ultimate tensile strength increased from 188 MPa in the as-cast state to 240 MPa at the center and 298 MPa at the periphery of the forged bar, accompanied by a hardness increase of 15–20 HV. Microstructural analysis revealed that {10-12} tensile twins dominated the deformation structure. Extensive cross-twinning in the late forging stage promoted further grain subdivision and intensified work hardening.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Insight the long-term biodegradable Mg-RE-Sr alloy for orthopaedics implant via friction stir processing
2. Blending with transition metals improves bioresorbable zinc as better medical implants
3. Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy10.1016/j.jma.2020.05.011 ↗
4. Correlative investigation of microstructure, localized corrosion behavior and mechanical properties in hot rolled Mg-Zn-Ca-xEr (x = 0.75, 2, 5, 8 wt%) biodegradable alloys for orthopedic applications10.1016/j.mtla.2025.102643 ↗
5. A phase-based approach to optimizing the mechanical and corrosion properties of biodegradable Mg-Zn-Ca alloys10.1016/j.jallcom.2025.181127 ↗
6. Recent advances in micro-alloyed wrought magnesium alloys: theory and design10.1016/S1003-6326(22)65907-7 ↗
7. Synergization of ductility and yield strength in a dilute quaternary Mg-Zn-Gd-Ca alloy through texture modification and Guinier-Preston zone10.1016/j.scriptamat.2021.114257 ↗
8. Effects of Nd and rotary forging on mechanical properties of AZ71 Mg alloys10.1016/S1003-6326(15)63955-3 ↗
9. The effect of rotary swaging on the structure and mechanical properties of Mg-Y-Gd-Zr alloys additionally alloyed with samarium
10. Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems10.1016/j.actbio.2019.11.013 ↗
11. Towards age-hardening ability enhancement and high strength in Mg-Gd-Ag alloy by balancing grain refinement and weakening of dynamic precipitation10.1016/j.jma.2024.06.032 ↗
12. Effect of Y addition on the microstructures and mechanical properties of as-aged Mg-6Zn-1Mn-4Sn (wt%) alloy10.1016/j.jallcom.2016.06.216 ↗
13. Intermetallics in magnesium alloys10.1002/adem.200500202 ↗
14. Effect of Gd on preparation of nanocrystalline Mg alloys via cold rotary swaging10.1016/S1003-6326(24)66509-X ↗
15. Research advances of magnesium and magnesium alloys worldwide in 202210.1016/j.jma.2023.07.011 ↗
16. Structural phenomena introduced by rotary swaging
17. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
18. Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion10.1016/j.jallcom.2024.177911 ↗
19. Effects of Mn addition on the microstructures, mechanical properties and work-hardening of Mg-1Sn alloy10.1016/j.msea.2019.02.021 ↗
20. Recent advances of high strength Mg-RE alloys: alloy development, forming and application10.1016/j.jmrt.2023.08.055 ↗
21. Effects of calcium addition on phase characteristics and corrosion behaviors of Mg-2Zn-0.2Mn-xCa in simulated body fluid10.1016/j.jallcom.2017.08.264 ↗
22. Hardening effect and precipitation evolution of an isothermal aged Mg-Sm based alloy10.1016/j.jma.2023.01.001 ↗
23. Effects of temperature on critical resolved shear stresses of slip and twining in Mg single crystal via experimental and crystal plasticity modeling10.1016/j.jma.2023.04.007 ↗
24. Applications of magnesium alloys for aerospace: a review10.1016/j.jma.2023.09.015 ↗
25. Enhanced strength of WE43 magnesium-rare earth alloy via combining extrusion and aging10.1016/j.msea.2023.145329 ↗
26. Experimental characterization and atomistic simulation of grain boundary segregation in Mg-Y alloys10.1016/j.jma.2025.04.030 ↗
27. Multi-Slips and ductility regulation of magnesium alloys
28. Effect of extrusion temperature and speed on texture evolution in Mg-Zn-Gd alloy and their correlation with mechanical properties10.1016/j.msea.2025.149183 ↗
29. Study on the microstructure evolution and strengthening mechanism of Cu-Ni-Si alloy after two-stage rolling and aging10.1016/j.matdes.2025.113935 ↗
30. Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: a review10.1016/j.jmrt.2022.07.154 ↗
31. Impact of twinning on cracking across grain sizes in an extruded AZ31 magnesium alloy revealed by quasi-in-situ analysis
32. Quasi-in situ electron backscatter diffraction analysis of twinning–detwinning behavior in AZ31 magnesium-alloy rolled plates subjected to compression loading in different directions10.1016/j.jma.2024.10.007 ↗
33. Shear strain-assisted cross-twin orientation regulation enhances the plasticity of ZM21 magnesium alloy10.1016/j.jallcom.2025.183040 ↗
34. Effect of Sn content on the microstructure and mechanical properties of high-Ca Mg-Al-Ca-Mn alloys
35. Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys10.1016/j.ijplas.2023.103595 ↗
36. Grain refinement of magnesium alloys by in-situ formed Al2RE particles: a comprehensive review10.1016/j.jmrt.2025.06.105 ↗
37. Deformation twinning and detwinning in extruded Mg-4Al: In-situ experiment and crystal plasticity simulation10.1016/j.ijplas.2022.103345 ↗
38. Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility10.1016/j.ijplas.2023.103525 ↗
39. Microstructure evolution and strengthening mechanisms of high-strength Mg-5Al-1Mn-0.5Zn-0.5Ca by rotary forging10.1016/j.jallcom.2024.173721 ↗
40. Achieving 1.2 GPa tensile strength in Cu-15Ni-8Sn alloy via large-strain rotary swaging: Multi-scale microstructure evolution and strengthening mechanisms10.1016/j.msea.2025.149375 ↗
41. Ultrahigh strain-rate dynamic recrystallization in high manganese austenitic steels: mechanisms of shear band anisotropy and resistance to localized failure10.1016/j.engfracmech.2025.111360 ↗
42. Direct comparison between experiments and dislocation dynamics simulations of high rate deformation of single crystal copper10.1016/j.actamat.2023.118851 ↗
43. Recrystallization mechanisms and microstructure development in emerging metallic materials: a review
44. Interactions between dislocations and boundaries during deformation10.3390/ma14041012 ↗
45. Transition of dislocation nucleation induced by local stress concentration in nanotwinned copper10.1038/ncomms8648 ↗
46. The effect of Y addition on recrystallization and mechanical properties of Mg-6Zn-xY-0.5Ce-0.4Zr alloys10.1016/j.vacuum.2018.06.048 ↗
47. Static recrystallization kinetics and texture evolution of low-temperature extruded Mg−Zn−Ca alloy during annealing10.1016/S1003-6326(24)66760-9 ↗
48. Evolution of twins and texture and its effects on mechanical properties of AZ31 magnesium alloy sheets under different rolling process parameters10.1016/S1003-6326(15)63999-1 ↗