A synergistic strategy for enhanced performance of CoCrNi/GH99 brazed joints after post weld heat treatment
Source abstract
Abstract
The brazing of CoCrNi and GH99 medium-entropy alloys is essential for producing reliable, lightweight precision components for aerospace applications. However, as-brazed joints often exhibit degraded performance due to γ′ phase coarsening and brittle boride formation. In this study, post-weld heat treatment (PWHT) was applied to CoCrNi/BNi-5a/GH99 joints to refine precipitates and homogenize the microstructure of joints. Following a comprehensive and in-depth analysis, PWHT reduced boride content and improved both microstructural uniformity and the distribution of γ′ precipitates within the brazing seam. Higher PWHT temperatures and longer aging times further decreased boride content. The fracture mode transitioned from quasi-cleavage in the as-brazed condition to ductile fracture after PWHT, with simultaneous gains in strength and plasticity. Reduced boride content lowered stress concentration in the brazing seam, while deformation twins which were formed during shearing worked synergistically with γ′ precipitates to enhance mechanical performance of joints. This work offers valuable insights into microstructure regulation and precipitation strengthening for medium-entropy alloy brazed joints, suggesting a viable route for fabricating high-performance lightweight aerospace assemblies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Design of new face-centered cubic high entropy alloys by thermodynamic calculation10.1007/s12540-017-6701-1 ↗
2. Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys10.1016/j.scriptamat.2019.02.018 ↗
3. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
4. Untra-fine-grained equiatomic CoCrNi medium entropy alloys with high density stacking faults and strengthening mechanisms10.1016/j.msea.2023.144880 ↗
5. Microstructure and texture development in CoCrNi medium entropy alloy processed by severe warm cross-rolling and annealing10.1016/j.intermet.2022.107463 ↗
6. Strengthening characteristics of CoCrNi alloys with different stacking fault energies10.1016/j.ijplas.2025.104401 ↗
7. Uniting ultrahigh tensile strength with ductility in CoCrNi alloy via cross-cryo-rolling10.1016/j.intermet.2025.108948 ↗
8. Insights into the gamma prime precipitation behavior during heat treatment of additively manufactured nickel-based superalloy10.1016/j.jallcom.2025.178507 ↗
9. Initial γ' phase formation mechanism in a GH4099 precipitation strengthened nickel-based superalloy10.1016/j.scriptamat.2025.116702 ↗
10. Effect of heat treatment on microstructure and mechanical properties of GH4099 superalloy fabricated by selective laser melting10.1016/j.jallcom.2022.167813 ↗
11. Collaborative manufacturing technologies of structure shape and surface integrity for complex thin-walled components of aero-engine: status, challenge and tendency10.1016/j.cja.2023.02.008 ↗
12. Advanced sandwich structures for thermal protection systems in hypersonic vehicles: a review10.1016/j.compositesb.2021.109301 ↗
13. Riggs · 2017
14. Role of Nb elements in SiCf/SiC/(CoFeNiCrMn)100-xNbx/GH536 brazed joints: joint residual stress transfer and pinning of dislocations10.1016/j.msea.2023.145914 ↗
15. Recent advances on joining of CMCs heterogeneous joints for aeroengine industry
16. Microstructure and mechanical properties of Al0·3CoCrFeNi high-entropy alloy joints brazed using a FeCoCrNiCu/Ti composite interlayer10.1016/j.jmrt.2024.05.001 ↗
17. Effect of Cr content in Ni-based amorphous filler on microstructure and shear strength of K4169 nickel-based alloy brazed joint10.1016/j.jmatprotec.2020.116975 ↗
18. TLP bonding of cast IN718 nickel based superalloy: process–microstructure–strength characteristics10.1016/j.msea.2013.01.029 ↗
19. Characterization of microstructure and mechanical properties of dissimilar TLP bonding between IN718/IN600 with BNi-2 interlayer10.1016/j.jmapro.2017.09.010 ↗
20. Diffusion brazing of GH536 polycrystalline superalloy with IC10 single crystal superalloy using BNi-2 interlayer10.1016/j.jmrt.2023.05.223 ↗
21. The joint properties of a high-chromium Ni-based superalloy made by diffusion brazing: microstructural evolution, corrosion resistance and mechanical behavior10.1016/j.jmapro.2018.11.025 ↗
22. Brazing manufacturing technology of plate-fin heat exchanger for solid oxide fuel cells10.1016/j.ijhydene.2022.10.272 ↗
23. Co element gradient character toward achieving high strength diffusion bonding of FGH98 superalloy at low temperature10.1016/j.jmapro.2025.06.011 ↗
24. The effect of microstructures and precipitates (γ', γ″, δ) on machinability of Inconel-718 nickel-based superalloy in turning process10.1016/j.jmapro.2022.08.004 ↗
25. Exploring solidification behavior, strength and steam oxidation resistance of the René 125 nickel-based superalloy with a high-volume fraction of intermetallic γ’ phase
26. Evaluation of precipitation phase and mechanical properties according to aging heat treatment temperature of Inconel 71810.1016/j.jmrt.2023.10.196 ↗
27. The influence of heat treatment conditions on γ′ characteristics in udimet® 72010.1016/j.msea.2004.01.027 ↗
28. Vacuum brazing effect on the interlayer failure behavior of TiAl/GH3536 hetero-thin-walled structure with BNi-2 interlayer10.1016/j.tws.2022.110492 ↗
29. Determining the kinetics of transient liquid phase bonding (TLPB) of inconel 625/BNi-2 couples using differential scanning calorimetry10.1016/j.jmatprotec.2017.05.013 ↗
30. Effect of diffusion brazing time on microstructure, isothermal solidification completion and microha10.1016/j.jmrt.2022.09.082 ↗
31. Microstructure and mechanical properties of CoCrNi/GH99 medium entropy alloy brazed joints: formation of medium entropy brazing seam10.1016/j.intermet.2025.108680 ↗
32. Microstructure evolution mechanism during post-bond heat treatment of transient liquid phase bonded wrought IN718 superalloy: an approach to fabricate boride-free joints10.1016/j.jallcom.2017.06.206 ↗
33. Role of base-metal composition in isothermal solidification during diffusion brazing of nickel-based superalloys10.1080/13621718.2017.1327934 ↗
34. Compositional variations for small-scale gamma prime (γ′) precipitates formed at different cooling rates in an advanced Ni-based superalloy10.1016/j.actamat.2014.11.009 ↗
35. Physically-based model for creep in nickel-base superalloy C263 both above and below the gamma solvus10.1016/S1359-6454(02)00119-2 ↗
36. Overgrown grains appearing during sub-solvus heat treatment in a polycrystalline γ-γ’ Nickel-based superalloy10.1016/j.matdes.2018.02.048 ↗
37. Microstructure evolution and shear strength optimization in SiC ceramic/MA956 ODS steel joints brazed with Cu 5Ti filler10.1016/j.matchar.2025.115107 ↗
38. Effect of aging treatment on microstructure, mechanical properties and corrosion resistance of 2219 aluminium alloy laser welded joint10.1016/j.jmrt.2025.10.148 ↗
39. Effect of heat treatment on the microstructural evolution and mechanical properties of GH4099 additive-manufactured by directed energy deposition10.1016/j.jallcom.2019.05.348 ↗
40. High strength-ductility synergy in a laser welded dissimilar joint of CrCoNi medium-entropy alloy and stainless steel10.1016/j.msea.2022.142854 ↗
41. Tensile deformation and fracture behavior at high temperature of the TLP joint for Hastelloy X superalloy with laminated interlayer10.1016/j.engfailanal.2025.109363 ↗
42. Microstructure evolution of ultra-high-strength twinning-induced plasticity (TWIP) steel under dynamic loading10.1007/s42243-020-00457-2 ↗
43. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
44. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
45. Effect of temperature on the mechanical properties of Ni-based superalloys via molecular dynamics and crystal plasticity10.1016/j.jmst.2024.02.085 ↗
46. Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy10.1016/j.jallcom.2022.164137 ↗
47. Mechanical response of low stacking fault energy Co–Ni alloys – Continuum, mesoscopic and atomic level treatments10.1016/j.ijplas.2015.04.003 ↗
48. Multiscale computational model of TWIP and TRIP in medium/high entropy alloys10.1016/j.jallcom.2025.179770 ↗
49. Preparation of ultrafine acicular α' phase titanium alloys via laser melting deposition: achieving synergistic enhancement of strength and corrosion resistance10.1016/j.jallcom.2025.184126 ↗