Corrosion and diffusion barrier behavior of NiAlY/AlCrTaTiZr coating in dry CO2 atmosphere at 650 °C: Experimental study and first-principles calculation
Source abstract
Abstract
In this work, NiAlY coatings with and without AlCrTaTiZr high entropy alloy diffusion barrier were deposited on Fe–Cr alloy by magnetron sputtering, and their corrosion and interdiffusion behavior are investigated systematically at 650 °C in dry CO 2 gas. The results show that the corrosion rate constant and the thickness of the interdiffusion zone of composite coating are both smaller than those of NiAlY coating after 300 h. Moreover, no harmful brittle intermetallic FeAl 3 precipitates in composite coating, and internal oxidation phenomenon can not occur. Based on first-principles calculations, it is suggested that the HEA layer of the composite coating effectively slows down the diffusion of Al and Ni atoms in the HEA phase and inhibits the interface diffusion of HEA/Fe. The addition of AlCrTaTiZr HEA enhances the high-temperature anticorrosion property of the NiAlY coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
2. Stainless steel in construction: a review of research, applications, challenges and opportunities10.1016/j.jcsr.2008.07.011 ↗
3. Fatigue strength of X45CrSi93 stainless steel applied as internal combustion engine valves10.1016/j.proeng.2011.04.209 ↗
4. On the prediction of CO2 corrosion in petroleum industry10.1016/j.supflu.2016.05.047 ↗
5. High temperature oxidation of steels in CO2 containing impurities10.1016/j.corsci.2019.108316 ↗
6. The mechanical property of the oxide scale on Fe-Cr alloy steels10.1016/j.jallcom.2012.09.064 ↗
7. On the mechanism of oxidation of iron-16.4% chromium at high temperature10.1016/0010-938X(64)90026-5 ↗
8. Corrosion by hot CO2 gases10.1149/2.F08212IF ↗
9. Corrosion of 9-12Cr ferritic-martensitic steels in high-temperature CO210.1016/j.corsci.2016.01.009 ↗
10. High temperature corrosion of Fe-Cr-(Mn/Si) alloys in CO2-H2O-SO2 gases10.1016/j.corsci.2016.07.026 ↗
11. High temperature oxidation of Ni alloys in CO2 containing impurities10.1016/j.corsci.2019.05.019 ↗
12. Molecular-scale investigation of the oxidation behavior of chromia-forming alloys in high-temperature CO210.1038/s41529-021-00194-1 ↗
13. Carburization of Fe-Cr alloys during oxidation in dry carbon dioxide10.1149/1.2426622 ↗
14. Deposition processes and properties of coatings on steel fasteners-A review10.1007/s40544-019-0304-4 ↗
15. Investigation of oxidation and hot corrosion behavior of molybdenum coatings produced by high-velocity oxy-fuel coating method
16. Elemental additions on corrosion resistance of high entropy alloy coatings on stainless steel fabricated via laser-based methods: a review10.1007/s12540-024-01828-0 ↗
17. Examination of the platinum effect on the oxidation behavior of nickel-aluminide coatings10.1016/j.surfcoat.2007.06.013 ↗
18. Effect of Hf, Y and C in the underlying superalloy on the rumpling of diffusion aluminide coatings10.1016/j.actamat.2007.10.006 ↗
19. Cyclic oxidation resistance of Ni-Al alloy coatings deposited on steel by a cathodic arc plasma process10.1016/S0257-8972(00)00994-4 ↗
20. Oxidation and hot corrosion resistance of HVOF/EB-PVD thermal barrier coating system10.1016/j.surfcoat.2021.126862 ↗
21. Cyclic oxidation-induced cracking of platinum-modified nickel-aluminide coatings10.1016/j.scriptamat.2009.02.012 ↗
22. Comparison of the corrosion resistance of Ni2Al3 coating with and without Ni-Re interlayer in dry and wet CO2 gas10.1016/j.corsci.2019.108121 ↗
23. Microstructural evolution and growth behavior of intermetallic compounds at the liquid Al/solid Fe interface by synchrotron X-ray radiography10.1016/j.matchar.2017.12.024 ↗
24. First principle calculations and mechanical properties of the intermetallic compounds in a laser welded steel/aluminum joint10.1016/j.optlastec.2019.105875 ↗
25. Interface characterization and mechanical properties of dual beam laser welding-brazing Al/steel dissimilar metals10.1016/j.jmapro.2019.03.005 ↗
26. Interface failure behavior of yttria stabilized zirconia (YSZ), La2Zr2O7, Gd2Zr2O7, YSZ/La2Zr2O7 and YSZ/Gd2Zr2O7 thermal barrier coatings (TBCs) in thermal cyclic exposure10.1016/j.matchar.2019.110072 ↗
27. A new design rule for high entropy alloy diffusion barriers in Cu metallization10.1016/j.jallcom.2023.170166 ↗
28. High-entropy alloy films10.3390/coatings13030635 ↗
29. Structure and properties of High-entropy amorphous thin films: a review10.1007/s11837-021-05107-w ↗
30. High entropy alloy bond coats for thermal barrier coatings: a review10.1007/s11666-023-01701-3 ↗
31. Evaluation of AlCoCrFeNiTi-high entropy alloy (HEA) as top coat material in thermal barrier coating (TBC) system and investigation of its high temperature oxidation behavior10.1016/j.surfcoat.2024.131569 ↗
32. Oxidation and interdiffusion behavior of NiAlY/AlCrTaTiZr coating on Fe-Cr alloy prepared by magnetron sputtering10.1016/j.jmrt.2024.11.255 ↗
33. Efficient iterative schemes forab initiototal-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
34. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
35. Growth kinetics of three Mo-silicide layers formed by chemical vapor deposition of Si on Mo substrate10.1016/S0257-8972(02)00015-4 ↗
36. Diffusion annealing of Mo/MoSi2 couple and silicon diffusivity in Mo5Si3 layer10.1016/j.msea.2007.01.026 ↗
37. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
38. Hydrogen release at metal-oxide interfaces: a first principle study of hydrogenated Al/SiO2 interfaces10.1016/j.apsusc.2017.02.059 ↗
39. Isothermal oxidation and thermal cyclic behaviors of YSZ and double layered YSZ/La2Zr2O7 thermal barrier coatings (TBCs)10.1016/j.surfcoat.2018.07.069 ↗
40. Impact of different atmospheres on oxidation and electrical performance of a solid oxide fuel cell interconnect with Co-containing protective coating10.1021/acs.energyfuels.0c01213 ↗
41. Role of re in NiAl bond coating on isothermal oxidation behavior of a thermal barrier coating system at 1100 °C10.1016/j.corsci.2023.111151 ↗
42. Automating first-principles phase diagram calculations10.1361/105497102770331596 ↗
43. The alloy theoretic automated toolkit: a user guide10.1016/S0364-5916(02)80006-2 ↗
44. The effects of X (X = Cr, Mn, Ti) on the stability, segregation behavior, and thermodynamic properties of the bcc-Fe/NiAl interface were investigated by a first-principles study
45. Hydrogen diffusion in Ti3C2 MXenes10.1021/acs.nanolett.4c05749 ↗
46. Phase transformation and diffusion in high-temperature oxidation of FeCrNi medium entropy alloy10.1016/j.corsci.2023.111685 ↗
47. Chemical potential dependence of defect formation energies in GaAs: application to Ga self-diff'usion10.1103/PhysRevLett.67.2339 ↗
48. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
49. Vacancy diffusion barrier spectrum and diffusion correlation in multicomponent alloys10.1016/j.actamat.2024.119653 ↗
50. The crystallographic template effect assisting the formation of stable α-Al2O3 during low temperature oxidation of Fe-Al alloys10.1016/j.corsci.2016.01.007 ↗
51. Localized epitaxial growth of α-Al2O3 thin films on Cr2O3 template by sputter deposition at low substrate temperature10.1063/1.1544442 ↗
52. Preparation and oxidation performance of a low-diffusion (Ni,Pt)Al coating with an in-situ formed α-W based diffusion barrier10.1016/j.corsci.2023.111758 ↗